PROVN OF WALL LINING, ROOF PANELING CONFERENCE TABLE AND REVOLVING CHAIRS FOR CONFERENCE HALL AT HQ 67 INF BDE AND PROVN OF SUB SURFACE IRRIGATION SYSTEM ASSOCIATED WITH SPRINKLER IN FOOTBALL GROUND NEAR ADM BLOCK P-272 OF KLP-II AT FAZILKA MIL STN

Amount

S&F for GI frame work for seamless ceiling comprising of Gi perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50mm and flange o 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre

S&F 10mm thick PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.l./M.S. as per specification and drawing complete all as specified and directed by Engr-in-charge

S&F of 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive o fixing on to wall to make PVC Frame. per specification and drawing.

S&F Solid PVC Wall Lining consisting of 5mm thick single side colour PVC shee inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), remving serviceable tiles to stores and and rubbish off the permises.

M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge.

M& Lapplying three coat of white wash on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified

Taking down carefully existing aluminium/Copper point wiring light, fan socket or power bell complete with fitting such as sockets, ceiling roses, pendants batten holders regulators socket, call bells & making good to the disturbed surfaces of walls, matching the colour with existing Surface all as spd and directed by Engr-in-Charge. Note: Rate for making good shall be deemed to be included in above item rate.

Taking down unserviceable main switches and MCB distribution boards single phase complete all as spd

Material and labour for concealed Point wiring for one light point/fan point /bell point controlled by one switch (using red, black and green colour wires as colour coding) complete with 2.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through and including PVC conduit 20 mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes, with Chromium plated brass screws & washers fittings and for 2mm thick galvanised steel pressed sunken box suitable for modular switch socket (Min 60mm deep, suitable length) concealed in wall, including inner and outer plates (cover plate) suitable for fixing the modular switches/ socket / regulator etc, including provn of 2.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) complete all as specified and as directed. (switch, socket, regulator shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ).

All as per Item No.10 above here in before but for One three pins 5 Amps switch socket outlet point on independent board with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly dolly complete all as specified and directed. (socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ).

All as per Item No.10 above here in before but for One three pins 5 Amps switch socket outlet point on same board with other switches with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed. (socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ).

Description all as per item No.10 above here in before but for 15 amps socket outlet with 4 Sqmm Copper incl 4.0 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed. (switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate.

Supply only modular switch 5/6Amps, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge. Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ.

Supply only modular Socket outlet multipurpose type 6 Amp, flush type (2 module) complete all as specified and as directed by Engineer-in-charge. Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ.

Supply only modular Socket outlet multipurpose type 6/16 Amp, flush type (2 module) complete all as specified and as directed by Engineer-in-charge. Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ.

Supply only modular switch 6/16Amps, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge. Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ.

M&L for Ceiling Rose, surface bakelite 12 to 3 terminal, 240 volts, 5 Amp ISI marked complete all as specified and directed.

S & F of MCB suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA and 6 to 32 Amps all as specified and directed.

S & F of RCCBs suitable for 240 volts AC supply, double pole 25A, 30mA with earth leakage protection all as specified and directed.

S& F modular motor starter switch for AC connection 25 amp, 240 volt, 50Hz, ON-OFF operation mode, push button type switch complete all as specified and directed by Engineer in Charge

S&F Distribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coating surface mounting SPN 12 way 240 volts with bus bar rating 200 Amps dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and directed..

S&F cordless/wireless bell with remote, sound range 30m with number of tune 32 complete all as specified and directed.

M&L for submain wiring comprising single core ,2 Runs of 10 sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including appropriate dia. PVC conduits heavy duty and conduit fittings/existing concealed conduit complete, including provision of 1 x 10 sqmm nominal cross sectional area multistranded copper conductor cable PVC insulated unsheathed 1100 Volts grade as earth wire complete incl taking down old UNSV sub main all as specified. ( Note :- Extra length of cables/ wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly)

M&L for ceiling light fitting of skylux LED warm type efficient LED surface square type luminaire & galre free soft illumination of capacity 15 watt LED white/warm coliur complete suitable for roof ceiling including connecting upto with driver 3 core flexible conductor copper of suitable size complete all asspecified anddirectedby Engrin-charge

S&F neon strip/profile LED light of warm colour or desired colour with complete driver /connector/adaptor of suitablecap withpower input of DC 2V,6.5W/Mtr consumption and 3000K warm white and 6500K coolday light, 120 LED. 580 lumensper mtr, IP65 surge cap upto 3.5KV approx with heat dessipation of length 50 Mtr roll incl all as specified and directed.

Taking out old ceiling light any size all as specified and directed by Engineer in Charge Note:- old US ceiling light to be deposited in MES yard.

Taking out old unserviceable ceiling fan any size all as specified and directed by Engineer in Charge. Note:- old US ceiling fan to be deposited in MES yard.

M & L for taking out of split AC any size/make carefully from one place and install to other or its original place after disconnecting electric connection from its stabilizer or its electric supply board and cleaning it with pressurised water and nylon brush then apply one coat of descaling solution and cleaning with nylon brush to the condensing coil shall be properly carried out damaging other parts, cheking and making serviceable electrical connection of DB, stabiliser,and tightening of loose connection complete, all as specified and directed by Engineer in Charge.

Supply and fixing Wall mounting fans complete with 3 blades and accessories, 230 V, 400 mm sweep. Five star rated with brushless direct current motor (BLDC) with remote as specified and recommended by manufacturer all as specified and directed by Engineer in Charge Make : Bajaj/Orient/Crompton, Havells and its equivalent.

Earthing complete with galvanised steel earth plate electroe 60 cmx60cm6mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connectedto and including galvanized earth lead GI Strip of size 32x6mm by means of GI bolt/snuts/washers, protected by 40mm bore GI light grade pipe from earth plate & upto 3m long pole fixed with 2 clamp made from mild steel flat iron 32x6mm bolts, nuts, washer etc. earth plate shall be surrounded by alternate layer of charcoal or coke and common salt 15cm thick all around buttom and top of earth plate 20mm dia GI Medium grade pipe for watering and including funnel, wire mesh, RCC cover & frame PCC 1:3:6 type C1 using 20mm graded stone aggregate as in earthing pit including necessary excavation & earth work all as specified & shown on electrical plate No. 3 of SSR Part-I, (Note: (i) PCC chamber shall be constructed at least 1.5 mtr away from the earth electrode and pipe for watering shall be provided in slanting manner (ii) earthing for Lightning protection is also included in the above item)

Supply and fixing GI pipe galvanised " Medium class " with all fitting laid in trenches of size 80 mm dia bore.

Supply and fixing GI pipe galvanised " Medium class " with all fitting laid in trenches of size 50 mm dia bore.

Supply and fixing GI pipe galvanised " Medium class " with all fitting laid in trenches of size 40 mm dia bore.

Supply and fixing GI pipe galvanised " Medium class " with all fitting laid in trenches of size 25 mm dia bore.

S & F stop valve size 25 mm cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for unions and fixed.

S & F stop valve size 40 mm cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for unions and fixed.

S & F stop valve size 50 mm cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for unions and fixed.

S & F butterfly valve of size 80 mm complete all as specified and directed.

Excavation in trenches, not exc 1.5 m wide and n. exc 1.5 m depth; or n exc 10 Sqm on plan and n exc 1.5 m in depth for pipe line in hard/dense soil, & getting out complete all as specified and directed by Engin-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed by Engineer-in-Charge

Removal of excavated surplus soil to a distance n.exc 50m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-charge .

Supply and fixing flexible rubber 3 layer hose pipe inner dia 25 mm and outer dia not less than 34mm, working pressure 10 bar and more than 30 bar burst pressure, suitable for use at -40 degree celcius to +120 degree celcius

Supply and installing 360 degree brass Rain gun with gear - driven, rotary type, with two heavy wheel not less than 4 inch, including 25mm GI pipe connection (Horizontal and vertical) with sprinkler to hose pipe and capable of covering a 30 (ft) radius at 40 PSI with a discharge rate of 2.1GPM at 360 degree and 4.4 GPM on complete adjustable shall be available with eight (8) nozzles discharging from 0.64 to 5.3 GPM. The raingun shall have radius reduction capabilities by means of stainless steel nozzle retainer/radius adjustment screw and QR coupling valve for direct fitting into the pipes/ flexible pipe and all other accessories as needed as directed Note:- Rates are deemed to including all accesories needed at ground for all guns to be fitted.

G S CONSTRUCTIONS (BID ID -3490823)

Harsh Construction Co. (BID ID -3491323)