Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.9 LAccepted-AOC 184 TENGPUNA PULWAMA PULWAMA PULWAMA JAMMU KASHMIR 192301 UDYAM JK 15 0009999 | PULWAMA | JAMMU AND KASHMIR | 192301 | L1 | Accepted-AOC ACCEPTED BEING LOWEST | |
| 2 | L2₹17.0 L+₹2.1 L (14.2%)Rejected-AOC | L2 | Rejected-AOC NOT ACCEPTED BEING NOT LOWEST | |
| 3 | L3₹18.4 L+₹3.5 L (23.4%)Rejected-AOC | L3 | Rejected-AOC NOT ACCEPTED BEING NOT LOWEST | |
| 4 | L4₹21.6 L+₹6.7 L (45.0%)Rejected-AOC KOIL KOIL PULWAMA PULWAMA JAMMU KASHMIR 192301 | PULWAMA | JAMMU AND KASHMIR | 192301 | L4 | Rejected-AOC NOT ACCEPTED BEING NOT LOWEST | |
| 5 | L5₹23.8 L+₹8.9 L (60.0%)Rejected-AOC | L5 | Rejected-AOC NOT ACCEPTED BEING NOT LOWEST |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
8 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) AWANTIPUR
GE (AF) AWANTIPUR, 8 FBSU, AF AWANTIPUR
REPAIRS TO CRACKS/BROKEN EDGES OF PAVEMENTS WITH EPOXY PU JOINT FILLING, COLD EMULSION AND AND OTHER CONNECTED WORKS IN AIRFIELD AT 8 FBSU AT AF STN AWANTIPUR
2024_MES_658710_1
GE (AF) AWA-16/2024-25
Open Tender
Civil Works
Item Rate
180 days
GE (AF) AWANTIPUR
AS PER NIT AND TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE (AF) AWANTIPUR
₹70,000
Yes
18 Sept 2024
10 Jun 2024
10 Jul 2024
10 Jun 2024
8 Jul 2024
25 Jun 2024
Amount
Repair to existing joint in PQC/PCC rigid pavement of size 20 to 40 mm wide and 40 mm depth (average) consisting of the following activities, complete all as specified and directed. Racking out old decayed/damaged existing sealing compound and cleaning the joints thoroughly by removing dust, dirt, foreign material by appropriate hand tools such as chisel, Hammer or L hooks.
NOTE:- (a) After cleaning the joints thoroughly, it shall got approved from GE before progressing further. (b) Removing the existing sealing coumpound from the edges, bottom and sides of the joints by cutting edges, bottom and sides of the joints 1mm of the existing construction joints (upto the full depth of 40mm (average) by mechanical tool (diamond cutter) to make the cross section of joint truly rectangular. NOTE:- Cutting the edges/sides/bottom of joints by using diamond cutter only and clean surfaces shall got approved by GE, after cleaning process, primer and joint filling shall be done in presence of Engineer -in- Charge. (c) Once again cleaning the joints with compressed air and applying two priming coats upto the full depth and width of the existing joints after an interval of 30 minutes to complete prepared surfaces of the joints. (d) Filling the closed polyethylene back up road 20 to 40 mm dia (as aplicable to joints) of make ELECON or M/s Supreme Industries Ltd and applying bond breaker tape on top of backup rod for complete width of joint and filled with polysulphide or polyurethane based sealant (minimum depth of sealant above backup rod shall be 15 mm) all as per manufacturer"s instruction including applying masking tape on edges of joints to prevent accidental spillage of sealant on top surfaces and removing the tape after sealant is applied, complete all as specified and as directed. NOTE:-- (i) Masking tape shall invariably be used on both sides of the joints and before further progressing of joint shall be got approved by Engineer-in-charge.a panal recovery of Rs. 20.00 /RM shall be effected for both sides if masking tape not found used for joint filling (ii) Material shall confirm to BS (Make FOSROC (COLPOR -200 gray) or Chemtallraj India Pvt Ltd. (RALLITHANE ) OR STP Ltd (Shalifex PU) OR CICO OR Cippy poly Seal OR CHOKSEY. (e) Electric supply shall be arranged by the contractor at his own arrangements and rate quoted for the item deemed include the same.
M&L for cutting the edges of the cracks into V shape upto 15mm to 20mm wide and 25mm to 30mm deep and removing the old/ all loose material to a distance n. exc 100 mtrs including cleaning the cracks throughly with help of blower and filling the cracks with rubberized cut back bitumen complete all as specified and directed by Engineer-In-Charge (Crack should be Refilled upto top if settlement occurred in crack with in 24 hrs after first time filling).
M&L for repair to broken edges/ corner/ cracks of any width in concrete/ Rigid pavement by cutting grooves in rectangular/ square form with hand tools/ diamond cutter upto a depth of 25mm including removal of all loose and foreign materials to a distance exceeding 50m and not exceeding 250 m and cleaning of grooves by means of compressed air, complete all as specified and directed so as to remove all dust, dirt, sand and foriegn material with applying primer coat and filling with component system mixture/ chemical as per manufacturers instructions, complete all as specified and directed.
M&L for preparation of black top surface by wire brushes for removing caked mud etc sweeping with brooms and finally fanning cleaned surface to remove all loose dust etc. and wetting the surface with water as directed by Engineer-in-charge, applying polymer modified emulsion with mechanical sprayer @ 0.3 Kg (0.15 Kg Solution + 0.15 Kg water)/ Sqm mix with water 1:1, complete all as specified and directed.
Preparing of old concrete surfaces and painting lines, dashes, arrows and letters etc exceeding 10cm width road marking paint white or golden yellow by using water based paint, complete all as specified and directed.
Demolition of cement concrete (Unreinforced) in ground floors and paving n.exc 15cm thickness (below or above ground level), completed all as specified and directed.
Removing excavated material at a distance exceeding 1.5 KM and not exc 5 KM and depositing where directed at a level above the starting point, complete all as specified and directed.
M&L 200mm thick (spread thickness) soling with broken stone of guage 100 to 50mm spread and levelled interstices filled surfaces formed and rolled with 8 to 12 tonne power roller, complete all as specified and directed.
M&L Plain Cement Concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including sub base of floors, complete all as specified and directed.
30mm thick sand cushion with clean river sand duly clear of residual, organic and deleterious materials spread evenly to uniform thickness laid over DLC layer, complete all as specified and directed.
M&L 60mm thick Machine Pressed Precast Concrete Interlocking Paver Block any shape confirming to IS 15658 - 2006 fo M-35 Grade with grey cement and no Pigment including dismantling of old broken interlocking tiles, complete all as specified and directed.
M&L PCC 1:2:4 type B-1 using 20mm graded stone aggregate in side of Paver tiles rounded or chamfered on edges, complete all as specified and directed.
MS Ghulam Hassan and Sons
M/S NAIK CONSTRUCTION COMPANY
M/s Gh Qadir and Sons
M/S GEE EMM MIR
BHAT CONTRACTORS AND GENERAL ORDER SUPPLIERS
M/S LUCKY BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .