REPAIR/ MAINT OF EXTERNAL SERVICES FOR ZONE B AREA UNDER AGE(I) CIF(R).

Amount

Demolition of brick work / stone masonry built in cement mortar or cement lime mortar including all quoins ,arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:4, complete all as specified and directed.

All as per description of item 2 above but except bricks complete all as specified and directed

M&L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement

Taking down cement plaster on brick or concrete surface and description including raking out joints Hacking for key scrubbing down with water, M&L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement mixed with and including two coats of cement base paint over a coat of primer on newly plastered surface of wall including preparation of surface and curing after applying each coat complete all as specified and directed.

S&F 15 mm bore dia steel water tubing 'medium grade' galvanised with all fitting (i.e. Tee, socket, bend etd) complete to walls and ceilings or laid in floors and taking up or down GI pipes 15mm bore and connection including cleaning for refixing or removal un-serviceabl pipe, complete all as specified and directed by Engr-in-Charge.

S&F 20 mm bore dia steel water tubing 'medium grade' galvanised with all fitting (i.e. Tee, socket, bend etd) complete to walls and ceilings or laid in floors and taking up or down GI pipes 20mm bore and connection including cleaning for refixing or removal un-serviceabl pipe, complete all as specified and directed by Engr-in-Charge.

Preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint/camouflaged pattern, complete all as specified and directed.

Demolition of cement concrete ( unreinforced) in ground floors and pavings n exe 15 cm thickness. ( below or above ground level) all as specified.

M&L 75mm thick plain cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in Sub base complete all as specified and directed.

M&L for 20 - 25 mm thick cement concrete chequred tiles 30cm x 30 cm, machine pressed, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over 15 mm thick screed bed in CM 1:6 complete all as specified.

M&L for Machine pressed precast concrete interlocking paver block (Factory made rubber moulded) any shape and size conforming to IS 15658-2006 of 60 mm thick M-35 grade, complete all as specified and directed.

Sand filling under floors or in foundations including watering and consolidation

M & L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in coping, band, bed plates and similar items including weathering slightly rounded or chamferred angles and throughting, complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as foundation filling and mass concreate, complete all as specified and directed.

M & L for PCC 1:3:6, Type- C-2 (using 40mm graded crushed stone aggregate) as in surface channels & drains including necessary moulds/form work, complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete , using extra cement , including forms , moulds, mitred/ stopped ends etc. all as specified.

M&L for TMT bars 10mm dia and over cut to length, bend to shape required including cranking, bending, spirally for hooping columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

M & L for precast reinforced cement concrete 1:2:4, type B-1 (using 20 mm graded crushed sotne aggregate) as in cover slab and similar articles including necessary moulds/form work set in Cement mortar 1:4, complete all as specified and directed.

Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of ₹ 4575.00 during AOC Note:- Tenderers shall not quote for this Schedule

NATIONAL TRADING COMPANY

M/s Rahat Traders

M/S BADRI NATH GUPTA