Tender for the work of shifting of HT- LT line from Tilamol Circle to Karally junction for a total distance of 3.685Kms as per the request of Quepem Municipal Council, Quepem, under the jurisdiction of Elect. Sub Division-II, Quepem.

Amount

Cost of Material

Supply of 11mts. long R.C.C. poles to pit points. Supply of poles as per the specification mentioned in Part-C.

Supply of 9mts. long R.C.C. poles to pit points. Supply of poles as per the specification mentioned in Part-C.

Supply of Cement Concrete 1:2:4 (1-cement: 2-sand :4-graded granite/basaltic aggregate 20mm nominal size ) including the cost of Centring, shuttering & muffing 0.4mts above ground. Concreting as per the specification mentioned in Part-C (Inclusive of erection cost)

Supply of HDGI 11KV V-shape X-arm made out of channel ISMC 75x40x7.3mm. Supply as per the Specifications mentioned in Part-C.

Supply of HDGI top fitting cross arm ISMC Channel 75x40mm, 0.7mts. Long for 11mtrs. long RCC pole along with clamps of minimum tensile strenght 410MPa conforming to IS 2062 as amended upto date Supply as per the specification mentioned in Part-C

Supply of cut point cross arm of channel ISMC 75X40mm. 1.3mts. Long of minimum tensile strenght 410MPa conforming to IS 2062 as amended upto date. Supply as per the specification mentioned in Part-C.

Supply of 11KV guard cross arm of channel ISMC 75X40mm. 1.5mts. Long of minimum tensile strenght 410MPa conforming to IS 2062 as amended upto date. Supply as per the specification mentioned in Part-C

Supply of HDGI 4pin X arm of made of channel ISMC 75X40X6mm Supply as per the specification mentioned in Part-C

Supply of HDGI 2pin X arm of made of channel ISMC 75X40X6mm. Supply as per the specification mentioned in Part-C

Supply of 11KV pin insulators with HDGI pin at pin points & cut points.Supply as per the specification mentioned in Part-C

Supply of 11KV 70KN disc insulator with 3 bolted type metal parts on cut points, end points & tapping points. Supply as per the specification mentioned in Part-C.

Supply of LT pin insulators with HDGI Pin at pin points. Supply as per the specification mentioned in Part-C

Supply of LT shackle insulator with HDGI metal parts, HDGI nut bolts etc. at cut points & end points. Supply as per the specification mentioned in Part-C.

Supply of ACSR RACOON Conductor of size 6+1/4.09mm. Supply as per specifications mentioned in Part C.

Supply of ACSR WEASEL Conductor of size 6+1/2.59mm. Supply as per the specification mentioned in Part-C

Supply of AA ANT conductor 7/3.10mm nominal size aluminium 50sq.mm with maximum current carrying capacity 190Amps at 40°C. for phase & binding. Supply as per the specification mentioned in Part-C.

Supply of AA GNAT conductor 7/2.21mm nominal size aluminium 25sq.mm with maximum current carrying capacity 80Amps at 40°C.for phase & binding on pin points & cut points & for providing jumpering and lacings. Supply as per the specification mentioned in Part-C

Supply of Enamelled danger board 11000Volts on above poles using necessary HDGI clamps & nut bolts. Supply as per the specification mentioned in Part-C

Supply of HDGI barbed wire as anticlimbing device (2mts. Length) Supply as per the specification mentioned in Part-C

Supply of HDGI stay set complete comprising of HDGI stay rod with plate, HDGI turn buckle with eye bolt, Break insulator of 15KV, suitable HDGI stay Clamps, HDGI Stay wire of size 7/10swg and HDGI nut bolts for 11mtr. long RCC pole. Supply as per the specification mentioned in Part-C

Supply of HDGI stay set complete comprising of HDGI stay rod with plate, HDGI turn buckle with eye bolt, Break insulator of 15KV, suitable HDGI stay Clamps, HDGI Stay wire of size 7/10swg and HDGI nut bolts for 9mtr long RCC pole. Supply as per the specification mentioned in Part-C

Supply of HDGI stay clamps for 11mtr long RCC pole S.A. shall be hot dipped galvanized generally conorming to IS-2633/72. Supply as per the specification mentioned in Part-C

Supply of HDGI stay clamps for 11mtr long RCC pole L.A. shall be hot dipped galvanized generally conorming to IS-2633/72. Supply as per the specification mentioned in Part-C

Supply of HDGI X arm clamps L.A. for 11mtr long RCC pole shall be hot dipped galvanized generally conforming to IS-2633/72. Supply as per the specification mentioned in Part-C

Supply of HDGI X arm clamps S.A. for 11mtr long RCC pole shall be hot dipped galvanized generally conforming to IS-2633/72. Supply as per the specification mentioned in Part-C

Supply of HDGI X arm clamps L.A. for 9mtr long RCC pole shall be hot dipped galvanized generally conorming to IS-2633/72. Supply as per the specification mentioned in Part-C

Supply of HDGI X arm clamps S.A. for 9mtr long RCC pole shall be hot dipped galvanized generally conorming to IS-2633/72. Supply as per the specification mentioned in Part-C

Supply of earthing with G.I pipes of size 8 feet long 40mm dia class B fabricated & perforated including alternate layers 30cm thick of charcoal salt (charcoal & salt-20kgs.each/pit). Supply as per the specification mentioned in Part-C

Supply of HDGI nuts & bolts G.I. Hexagonal head and hexagonal nuts conforming to IS 1363 part 1 to 3 1992 as amended upto date. The bolts and nuts shall be hot dip galvanized as per IS: 2629-1985 as amended upto date. Supply as per the specification mentioned in Part-C

Cost of Erection

Erection of 11mts. long R.C.C. poles by digging Pole pit of size 0.60mtsX0.60mts X1.83mts. deep in all types of soil laterite/hard rock, including re-filling of soil, ramming, leveling & disposing of extra soil, concreting and muffing. Erection as per the specification mentioned in Part-C.

Erection of 9mts. long R.C.C. poles by digging Pole pit of size 0.60mtsX0.60mts X1.5mts. deep in all types of soil laterite/hard rock, including re-filling of soil, ramming, leveling & disposing of extra soil, concreting and muffing. Erection of poles as per the specification mentioned in Part-C.

Fixing of HDGI 11KV V-shape X-arm made out of channel ISMC 75x40x7.3mm on pin points Fixing as per the Specifications mentioned in Part-C.

Fixing of HDGI top fitting cross arm ISMC Channel 75x40mm, 0.7mts. Long for 11mtrs. long RCC pole along with clamps of minimum tensile strenght 410MPa conforming to IS 2062 as amended upto date. Fixing as per the specification mentioned in Part-C

Fixing of 11KV cut point cross arm of channel ISMC 75X40mm. 1.3mts. Long of minimum tensile strenght 410MPa conforming to IS 2062 as amended upto date. Fixing as per the specification mentioned in Part-C

Fixing of 11KV guard cross arm of channel ISMC 75X40mm. 1.5mts. Long of minimum tensile strenght 410MPa conforming to IS 2062 as amended upto date. Fixing as per the specification mentioned in Part-C

Fixing of HDGI 4pin X arm of made of channel ISMC 75X40X6mm. Fixing as per the specification mentioned in Part-C.

Fixing of HDGI 2pin X arm of made of channel ISMC 75X40X6mm. Fixing as per the specification mentioned in Part-C

Erection of 11KV pin insulators with HDGI pin at pin points & cut points. Fixing as per the specification mentioned in Part-C

Erection of 11KV 70KN disc insulator with 3 bolted type metal parts on cut points, end points & tapping points. Fixing as per the specification mentioned in Part-C.

Erection of LT pin insulators with HDGI Pin at pin points. Fixing as per the specification mentioned in Part-C

Erection of LT shackle insulator with HDGI metal parts, HDGI nut bolts etc. at cut points & end points.Fixing as per the specification mentioned in Part-C

Erection, Stringing of ACSR RACOON Conductor of size 6+1/4.09mm. Erection and Stringing as per specifications mentioned in Part C.

Erection, stringing of ACSR WEASEL Conductor of size 6+1/2.59mm. Erection & stringing as per the specification mentioned in Part-C

Erection, stringing of AA ANT conductor 7/3.10mm nominal size aluminium 50sq.mm with maximum current carrying capacity 190Amps at 40°C.for phase & binding on pin points & cut points. Erection stringing as per the specification mentioned in Part-C.

Erection, stringing of AA GNAT conductor 7/2.21mm nominal size aluminium 25sq.mm with maximum current carrying capacity 80Amps at 40°C.for phase & binding on pin points & cut points & for providing jumpering and lacings. Erection, stringing as per the specification mentioned in Part-C

Erection, Fixing of Enamelled danger board 11000Volts on above poles using necessary HDGI clamps & nut bolts. Erection fixing as per the specification mentioned in Part-C

Providing of HDGI barbed wire as anticlimbing device (2mts. Length) Providing, Fixing as per the specification mentioned in Part-C

Erection of HDGI stay set complete comprising of HDGI stay rod with plate, HDGI turn buckle with eye bolt, Break insulator of 15KV, suitable HDGI stay Clamps, HDGI Stay wire of size 7/10swg and HDGI nut bolts for 11mtr. long RCC pole. Erection as per the specification mentioned in Part-C

Erection of HDGI stay set complete comprising of HDGI stay rod with plate, HDGI turn buckle with eye bolt, Break insulator of 15KV, suitable HDGI stay Clamps, HDGI Stay wire of size 7/10swg and HDGI nut bolts for 9mtr long RCC pole. Erection as per the specification mentioned in Part-C

Fixing of HDGI stay clamps for 11mtr long RCC pole S.A. shall be hot dipped galvanized generally conorming to IS-2633/72. Fixing, Erection as per the specification mentioned in Part-C

Fixing of HDGI stay clamps for 11mtr long RCC pole L.A. shall be hot dipped galvanized generally conorming to IS-2633/72. Fixing, Erection as per the specification mentioned in Part-C

Fixing of HDGI X arm clamps L.A. for 11mtr long RCC pole shall be hot dipped galvanized generally conforming to IS-2633/72. Erection, fixing as per the specification mentioned in Part-C

Fixing of HDGI X arm clamps S.A. for 11mtr long RCC pole shall be hot dipped galvanized generally conforming to IS-2633/72. Erection, Fixing as per the specification mentioned in Part-C

Fixing of HDGI X arm clamps L.A. for 9mtr long RCC pole shall be hot dipped galvanized generally conorming to IS-2633/72. Erection, fixing as per the specification mentioned in Part-C

Fixing of HDGI X arm clamps S.A. for 9mtr long RCC pole shall be hot dipped galvanized generally conorming to IS-2633/72. Erection, fixing as per the specification mentioned in Part-C

Providing, installation and connecting of earthing with G.I pipes of size 8 feet long 40mm dia class B fabricated & perforated including alternate layers 30cm thick of charcoal salt (charcoal & salt-20kgs.each/pit) inclusive of excavation backfilling and spreading of excavated earth evenly. Providing, installation and connecting as per the specification mentioned in Part-C

Fixing of HDGI nuts & bolts G.I. Hexagonal head and hexagonal nuts conforming to IS 1363 part 1 to 3 1992 as amended upto date. The bolts and nuts shall be hot dip galvanized as per IS: 2629-1985 as amended upto date. Fixing as per the specification mentioned in Part-C

Removing of 11mtr. Long RCC Pole.

Removing of 9mtr. Long RCC Pole.

Removing of 90lb/yd Rail poles 9mtr. Long

Removing of HDGI 11KV V Shape cross arm

Removing of Cut Point cross arm 1.3mtrs long

Removing of 11KV Guard Cross arm, ISMC Channel 75x40mm, 1.5mtrs. long.

Removing of HDGI top fitting for 11KV RCC Pole

Removing of HDGI Stay clamps for RCC Pole 11mtrs. S.A.

Removing of HDGI Stay clamps for RCC Pole 11mtrs. L.A.

Removing of 11KV Pin Insulator with HDGI Pin

Removing of 11KV Disc Insulator 70KN with HDGI Metal Parts,

Removing of ACSR “RACOON” conductor of size (6+1/4.09mm)

Removing of ACSR “WEASEL” conductor of size (6+1/2.59mm)

Removing of GI 4Pin LT cross arm Channel type with clamps for 9mtrs. long RCC Pole.

Removing of GI 4Pin LT cross arm Channel type with clamps for 11mtrs. long RCC Pole.

Removing of GI 4Pin LT cross arm Channel type with clamps for 90lb/yd Rail Pole.

Removing of GI 2Pin LT cross arm Channel type with clamps for 9mtrs. long RCC Pole.

Removing of GI 2Pin LT cross arm Channel type with clamps for 11mtrs. long RCC Pole.

Removing of GI 2Pin LT cross arm Channel type with clamps for 90lb/yd Rail Pole.

Removing of LT Pin Insulator with GI Pin

Removing of LT Shackle Insulator with metal parts.

Removing of AA ANT Conductor.

Removing of AA GNAT Conductor

Removing and re-fixing of 130W LED Fixtures.

Removing and restringing of Twin Core service connection wire of size 4.0Sq.mm

Removing and restringing of Twin Core service connection wire of size 6.0Sq.mm

PADMASHREE ELECTRICALS ENGINEERS AND CONTRACTORS