Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.6 CrAccepted-AOC NO 1 PPS COMPLEX METTUR MAIN ROAD OMALUR TALUK SALEM 636455 | SALEM | SALEM | TAMIL NADU | 636455 | ₹7.6 Cr | L1 | Accepted-AOC The Lowest and negotiated tenderer |
| 2 | L2₹7.6 Cr+₹187.39 (<0.01%)Rejected-Finance | ₹7.6 Cr+₹187.39 (<0.01%) | L2 | Rejected-Finance Unsuccessful tenderer |
| 3 | L3₹7.7 Cr+₹1.6 L (0.21%)Rejected-Finance NO 15 3 BREEZE APARTMENT SERVICE ROAD NOLAMBUR CHENNAI 600037 | CHENNAI | TAMIL NADU | 600037 | ₹7.7 Cr+₹1.6 L (0.21%) | L3 | Rejected-Finance Unsuccessful tenderer |
| 4 | L4₹8.1 Cr+₹50.0 L (6.54%)Rejected-Finance NO 250 2 R T NAGAR EAST 2ND CROSS REDDIYUR ALAGAPURAM SALEM 636004 | SALEM | TAMIL NADU | 636004 | ₹8.1 Cr+₹50.0 L (6.54%) | L4 | Rejected-Finance Unsuccessful tenderer |
| 5 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
Refer Docs
EMD Value
₹4.6 L
Closing Date
18 Jan 2023, 6:00 pmClosed
SUPERINTENDING ENGINEER, TNPHC LTD, NORTH CIRCLE.
O/o the Superintending Engineer/North Circle No.1 and 7, Inspectors quarters, PGR Line, Behind CPO Building, Annadhanapatty, Linemedu, Salem - 636 006.
Construction of 1 No. of INS, 3 Nos. of SI and 46 Nos. of PC/HC Quarters building with few development works at South Avinashipalayam in Tiruppur District.
2023_TNPHC_278592_1
SE/NC/DB/1357/2021
Open Tender
Civil Works
Lump-sum
300 days
South Avinashipalayam in Tiruppur District.
Construction of 1 No. of INS, 3 Nos. of SI and 46 Nos. of PC/HC Quarters building with few development works at South Avinashipalayam in Tiruppur District.
9 documents required · 9 mandatory
₹0
₹4.6 L
4 Sept 2023
4 Jan 2023
20 Jan 2023
4 Jan 2023
18 Jan 2023
4 Jan 2023
Amount
1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.
1.3 : Earth work excavation in Soft disintegrated rock (including refilling) a. 0 to 2 mt.
1.6 : Earth work excavation for Open foundation (excluding refilling) width upto 1.25m for drains a. 0 to 2 mt.
13.1 : Filling with Excavated Earth
21.2 : Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m
b. T.W. below 2 m length.
23.3 : S&F of Magnetic door catches
24 : Manufacturing & supply of steel windows (Weight basis)
25 : M.S.Holdfast
30 : Ellispattern
31 : Weathering couse
37.1 : White washing 3 coats (slaked)
39 : M.s Grills
40 : Painting - New "wood work"
41 : Painting - New "iron work"
46 : S & F 20 mm dia Alu. Hanger Rod
47 : S & F Alu Towel rail 75 cm long
48 : S & F 5 pin Coat stand
49 : S & F chromium plated 8 guage Picture Hook
50.4 : Providing Tree guard
52 : PVC Water supply (ASTM) a. 32 mm dia
b. 25 mm dia
52.1 : Supplying and fixing of 20mm dia "B" Class GI pipe for Hot water line (Fully Concealed in walls)
Electrical arrangements 69 : 15 Amp. Power plug
72 : Box type Fibre Fan hook
74 : Charges for fixing of "Fan"
76 : 8 SWG wire
77.3 : S&F of TV/Telephone line Socket
77.4 : S&F of 20mm dia PVC pipe for TV/Telephone line
78 : Earthing Station IS3043 (Type I)
86 : Anti termite treatment
ANNEXURE 2.1.1 : Supplying and filling with gravel
2.1.3 : Filling sand (using crushed stone sand)
3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)
3.3.1 : P.C.C. 1:8:16 using 20 mm broken brick jelly (using crushed stone sand)
6.2.1.1 : Brick work in C.M. 1:5 (F& B) using Fly ash bricks of size 230x110x70mm (using crushed stone sand) with admixture
8.1.1.1 : Standardised concrete Mix M20 Grade Concrete (using crushed stone sand) a) In Foundation and basement
b) In Stilt / Ground Floor
c) In First Floor
d) In Second Floor
e) In Third Floor
f) In Fourth Floor
9.2.1.1 : Brick work in C.M. 1:6 using Fly ash bricks of size 230x110x70mm (using crushed stone sand) with Admixture a. In Ground Floor/Stilt floor
b. In First Floor
c. In Second floor
d. In Third floor
e. In Fourth floor
10.2.1.1 : Brick partition work in C.M. 1:4 using Fly ash bricks of size 230x110x70mm (using crushed stone sand) 110 mm tk (B.P.) with Admixture a. In Foundation and basement
b. In Ground Floor/stilt floor
c. In First Floor
d. In Second Floor
e. In Third Floor
f. In Fourth Floor
11.2.1.1 : Brick Partition work in C.M. 1:4 using Fly ash bricks of size 230x110x70mm (using crushed stone sand) 70 mm tk (B.P.) with Admixture a. In Ground floor
b. In First floor
c. In Second floor
d. In Third floor
12.1.1 : Brick partition in C.M. 1:4 using country bricks of size 22 x11x5cm 50 mm thick (using crushed stone sand) with Admixture a. In Ground floor
b. In First floor
c. In Second floor
d. In Third floor
14.1.I : Precast Cupboard slab 20mm tk. using standardised concrete mix M20 (Using crushed stone sand) a) In Ground Floor
b) In First Floor
c) In Second Floor
d) In Third Floor
14.1.II : Precast Cupboard slab 40mm tk. using standardised concrete mix M20 (Using crushed stone sand) a) In Foundation and basement
b) In Ground Floor
c) In First Floor
d) In Second Floor
e) In Third Floor
16.1.2 : Precast Jally Ventilator 50mm thick.Using standardised M20 grade concrete Mix withouty vibrating charges. (using crushed stone sand) a. In Ground Floor
b) In First Floor
c) In Second Floor
d) In Third Floor
e) In Fourth Floor
18.1 : Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,
b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works
c.For Square and rectangular columns and small quantities
21.5.2 : Supply and fixing Solid UPVC door shutter with frame
21.6.1 : R.C.C.Door frames of size 100 x 75mm with one edge grooves size 't' x 20 mm M20 grade (with out vibrating charges) (using crushed stone sand) a. 900 x 2100mm
23.1 : TW styles & rails with 9mm thick BWR single leaf shutters with brass screws size of a. 900x2100 mm
23.2.1 : 4mm thick pin headed Glass panels with Aluminium beedings
22.3.3 : T.W. frame & T.W styles & rails with BWR double leaf shutters for Cup board/ward robes including two coat enamel paint & one coat primer.
26.1 : Flooring in C.C.1:5:10 (using crushed stone sand)
28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) Mixed with Super Plasticiser
29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)
29.9.1 :Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler).(using crushed stone sand)
32.1.1 : Finshing the top of Terrace floor with Pressed tiles (23cmx23cmx20mm) mixed with Water proofing compound (using crushed stone sand)
33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) Mixed with Super Plasticiser
34.1: Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand) Mixed with Super Plasticiser
35.1.1 : Plastering 1:3, 12mm with WPC (using crushed stone sand)
35.1.2: Spl. Ceiling plastering in C.M. 1:3,10 mm tk.(using crushed stone sand) Mixed with Super Plasticiser
36.1 : Cement mortar Border in C.M. 1:5, 12 mm tk (using crushed stone sand) including Super plasticizer a. 150 mm wide
b. 75 mm wide
c. 50 mm wide
38.6 : One coat white cement for new walls and other similar works.
38.7 : Plastic Emulsion PAINT including primer for outer
43.1 : Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.
44.2 : Rain water harvesting using defunct borewell and providing perforated cover slab (using M30) a). Providing pit
b) Augering 30cm dia
44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe
50.3.1 : Supply and planting avenue trees (using crushed stone sand)
50.5.1 : Supplying. Fabricating and erection of M.S Scheme Name board (using crushed stone sand)
50.6.1 : Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand)
52.4 : 20mm dia PVC water supply ASTM pipe (fully consealed in walls)
53.5.2 : Wash Hand Basin of size 550 x 400 mm (without pedestal)
54.1.1 : S & F of 15mm dia half turn CP long body tap
54.2.1 : S & F of 15mm dia half turn CP short body tap
56.3.1.1 : S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - G.F. (using crushed stone sand)
56.4.1.1 : S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - Other than G.F. (using crushed stone sand)
57.1.1.1 : S & F of E.W.C (White) 500mm with PVC SWR grade "P" or "S" TRAP (using crushed stone sand)
58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.
b. 75 mm dia.
58.4 : Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.
59.2.1 : Gully Trap using chamber burnt bricks of size 23x11.4x7.5cm (using crushed stone sand)
60.1 : PVC Nahani trap (4way/2way) (using crushed stone sand)
61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe
b. 160 mm UPVC Non Pressure pipe
62.1.1 : PVC Specials as per IS 10124/1982 Part II a. 110 mm dia PVC bend
b. 160 mm dia PVC bend
62.2.2 : PVC Equal Tee as per BIS 7834/1975 a. 110 mm dia PVC Equal tee
b. 160 mm dia PVC Equal tee
64.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose
b. Light point without ceiling rose
c. Calling bell point with Buzzer/Calling bell
65.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.
66.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.
67.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.
68.2 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.
75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer
77.2.1 : S & F of 20 amps DP plug & Socket in sheet enclosure with 32 A DP MCB in flush wall with earth connection(For AC Plug) Superior variety
77.6 : Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.
77.7 : Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.
98.3.1 : TW panelled single door shutter (with brass fittings) a. 1000 x 2100mm. (Single leaf)
112.1 : S & F of Exhaust Fan 225mm dia
344.2 : S&F of Bevelled edge mirror 500 x 400 x 5.5mm
361.5.1 : Virtified tile (Ivory colour) Flooring (using crushed stone sand)
367 : Providing wooden (melamine) polish for new wood
379.4.2.1 : S & F of Granite tile of size 2' x 1', 10mm Thick For kitchen arrangements (Jet black) a. In Ground floor
b. In First floor
c. In Second floor
d. In Third floor
383: S&F of Cuddapah sink 600 x 600 x 200mm
384:S&F of PVC flushing cistern
448.2: Supply and fixing 32mm dia PVC Tee with end cap
799 : Two coat of OBD over one coat white cement for inner walls
A1: Run of 4 Wires of 6 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.
A2: Supplying and fixing of 9 Watts LED bulbs
A3: Supplying and fixing of 4' long 18 Watts LED tube light with fittings
A4: Supplying and fixing of Bulk head fittings suitable for 12W bulb.
A5: Supplying and fixing of 25 Watts LED Street light .
A6: Supplying and fixing of 12 Watts LED bulbs.
A7: Supplying and fixing of SFRC Manhole Cover slab Size 75 x 75 cm including of all cost etc
A8: Supplying and fixing of PVC corner sheet beeding including all charges of materials labour charges etc complete.
A9: Supply and fixing of Concealed stop cock approved quality with ISI mark relevent specfication with including Labour Fixing charges etc.
A10: Supply and fixing of Health faucet with Two way angle cock approved quality with ISI mark relevent specfication etc
A11: Supply and Delivery of RCC Hume pipe OF Size 300mm dia including , loading unloading transpoartion , charges etc.
A12: Supplying and fixing of following size of TNPHC Emblem & Aluminium Dye casting letters with MRF Powder Coating including labour charges for fixing in position a) 2'0" Height TNPHC Emblem
b) 9" dia Aluminium Dye casting letters
C) 4" dia Aluminium Dye casting Numbering.
PPSandCo
SRP CONSTRUCTION COMPANY
Prasath Constructions
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .