Construction of CISF morcha, steel structure and roofing work for a shed and related civil works at PRAFPUL, SPF and S62 at South Site, BARC, Trombay, Mumbai400085

Amount

Aluminium Composite Metal Panel Designing, providing and fixing of 4 mm thick approved make and shade Aluminium Composite Metal Panel of approved make cladding at different locations including soffits of over-hangs but excluding aluminium frame work with grids filled in with weather silicon sealant as per the drawings. The ACM panel composition shall be of 0.5 mm thick PVDF coated aluminium sheet + 3 mm thick low density polyethelene virgin resin core + 0.5 mm thick polyester (PVDF) coated Aluminium sheet all complete as per approved shop drawings and specification (Aluminium frame work will be paid under reelevant item)

Aluminium work with colour anodizing Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately) Anodised Aluminium sections (Minimum anodizing thickness of 15 micron) Item also includes charges for colour anodizing

Stainless steel Hand Rail Providing and fixing hand rail using 304 grade Stainless Steel pipes of approved size and make and quality by welding, mirror / matt polishing, fixing at site etc. for balcony railing & staircases railing including special sections as per drawings, specifications. complete as directed by the Engineer-in-charge

Structural Steel in hollow sections Providing, supplying, cutting, welding, fabricating, hoisting and fixing in position structural steel members like trusses, purlins, posts etc. using MS hollow / circular / square / rectangular tubular sections including appling a coat of Zinc chromate primer of approved make all as per specifications, drawings and as directed by the Engineer in charge

Structural steel work in M.S Plates Providing Structural steel work in M.S Plain Plates and chequrred Plates for Embedded Parts, Trench Covers, Connection plates etc.including cutting, hoisting, fixing in position and applying a priming coat of approved zinc chromate steel primer etc.including cost of structural steel Plates, welding all labour charges etc. complete as per drawings and specifications. Using materials produced by the own plants of SAIL , RINL (Vizag Steel) and TATA only using virgin materials. All test reports to be provided along with the supply of the materials

Structural Steel Providing Structural steel work using angles, channels, joists and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge Up to and including 300 mm Joists, 350 mm channels, and below sections using materials produced by SAIL / RINL (Vizag Steel) / TATA. All test reports to be provided along with the supply of the materials

Reinforcement Steel Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. Steel supplied by the contractor Using TMT bars of specified grades all dia bars. TMT bars to be supplied by the contractor manufactured by other than SAIL, RINL or TATA and approved brands of BARC only

Structural Steel Hinges for MS gate Providing Structural steel Hinges using Ms solid Square/ Round and/or combination of both sections. Hingess set shall includeMS solid of size 50mm X 50mm X 100 mm thickness -2 nos along with 30mm dia -100mm long stainless steel pivot adn a 100x100x12mm thick ms plate for support or similar as available at site. Thew set of hinges shall be welded to existing built up sections of gate vertical post having weight of each shutter not excedding 1000kg. Item includes cutting of existing damaged hinges and grinding the surface to give smooth finish to the ms pos and supplying, cutting, welding, fabricating, hoisting, fixing hinge set in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge

Providing hydra crane Providing hydra crane having lifting capacity of 15MT along with driver for loading/ unloading / shifting and/or usable MS fencing gate and other works as directed by the Engineer-in-charge. Note: 1 job is calculated for 1 day

Clear float glass Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item) With clear float glass panes of 6.00 mm thickness

Tower bolts Providing and fixing stainless steel tower bolts of size 300 X 12 mm of approved make with necessary screws etc. all as per specifications and as per drawings.

S.S. butt hinges Providing and fixing IS:12817 marked stainless steel butt hinges of size 125 x 64 x 2.5 mm (heavy weight)" GARG' or equivalent approved make with suitable stainless steel screws etc. complete

Stainless steel "C" type door handles Providing and fixing pair of stainless steel "C or D" type door handles 25 mm dia, 300 mm long SS 304 grade solid rod , of specified size in steel doors/ wooden doors including screws / bolts etc. all as per drawings and specifications complete.

Heavy duty mortise latch and lock Providing and fixing brass mortise latch and lock of approved make of SS finish with necessary screws of M/s Godrej model name SS D - Type tube Lever combi 240mm 1CK product code 6548 etc complete suitable for fixing in wooden / steel/ FRP/ doors as per specifications.

Heavy duty door closer Providing supply and fixing Door Closer TS 71- DORMA- Std Arm.with necessary accessories and screws etc. As per manufactures instruction, specifications and as directed by EIC.

Fixed type Awning Designing, fabrication, supply, guaranteeing and installation of fixed type awnings using galvanized tubular structure and architectural fabric of M/s Ferrari make or equivalent of approved shade, colour and pattern. Fabric shall be weather resistant, UV resistant, fire retardant for protecting the facility from sun and rain etc complete in general as required to suit site and as directed by Engineer-in-charge.

3mm thick solid Poly carbonate sheet Designing, providing and fixing of Poly carbonate solid sheet of 3mm thick of approved make in cladding at different locations including soffits of over-hangs , fixing in aluminium frames, including supply and installation of 3mm thick stainless steel clamps at corners made out of ss flats bend to shape as required, weather silicon in joints etc.. Complete as per drawings and as dircted at site. Aluminium frame used shall be measured seperately in relevant item.

2.00 mm thick woodern texture PVC flooring Providing and Fixing 2.00 mm thick PVC sheet / tile in flooring and skirting in woodern texture of approved make in approved pattern on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturer including, levelling small undulations with plasterof paris if required , rolling with light wooden roller weighing about 5 kg all complete as directed by Engineer-in-charge in approved colour and shade

Silicon sealant Filling the gap between aluminium frame & adjacent RCC / Brick work / Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Up to 5 mm depth and 5 mm width

75mm thick PU foam insulated roofing of sandwich type Providing and fixing of 75mm thick Sintex/ Lloyds/ Jindal/ Metechno/and Renayak make or equivelent sandwich PUF panels f approved colour shade for roofing made out of 0.5mm thick precoated G.I Sheets on both sides ( Tongue and groove type) as per the required size with minimum density of 40kg/M3 including all necessary fixtures, Zinc coated fastners etc. complete. where ever gaps are there between PUF panels and window / doors/ frame /roof gaps shall be filled with silicon sealents to avoid leakages as per manufacturer’s specifications including re-sizing / cutting the sheets as required etc. complete as manufacturer’s specifications and as directed by EIC. Note: The building wall side shall be make water tight as described in relevant item

Roofing accessories like ridges, gutters, aprons and flashings. Providing and fixing precoated Galvalume roofing accessories for PUF sheet roofing ands well as galvalum shhet roofing using self drilling / self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete. Roofing accessories of colour coated Galvalume sheet up to 600 mm total widthand mininum 0.5mm thick for ridges, gutters, aprons and flashings. Flashing along building side wall to prevent leakage through walls by cutting and making 10mm grooves at existing masonry walls and after inserting the sheets, sealing shall be done as per manufactures specifications. Shade of flashing shall be match with roofing sheets.

PUF sheet roofing end cap Providing and fixing roof end cap for insulated sandwich (PU foam) roofing , shade shall be matched with roofing sheets as per manufacturer specifications.

PUF sheet roofing Side cap Providing and fixing roof Side cap for insulated sandwich (PU foam) roofing, shade shall be matched with roofing sheets as per manufacturer specifications.

PVC rain water pipes Providing and fixing PVC rain water pipes SWR PIPE 160 mm O/D conforming to relevant IS type B and PVC SWR fittings & specials conforming to relevant IS including jointing with seal ring / With PVC solvent adhesive including fixing in walls using clamps etc complete all as per drawings, specifications and as directed by the Engineer-in-charge

Micro concrete Providing SFMC Micro concrete for strengthening of structural members including mixing, pouring, curing as per manufacturer specifications and as directed by the Engineer-in-charge Using 100% SFMC

Granite Providing and fixing Minimum 17 mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut Granite of Jet Black colour for kitchen platforms, vanitiy counters, wash basin counters, door frames, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete at all levels

Kotah stone flooring Providing and laying minimum 25 mm thick uniform shade Kotah stone flooring over 20 mm thick (Avearge) base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing in minimum three levels to obtain mirror polish complete with base cement mortar 1:4 (using crushed sand) all as per specifications, patterns and drawings complete.

Kotah stone treads and risers Providing and Laying Minimum 25 mm thick uniform shade Kotah stone treads and risers of steps, skirting,window sills in single length up to 2.00 metres length slab dado and pillars laid on 12 mm thick (average) cement mortar 1:3 (using crushed sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing to obtain mirror finish complete as per specifications, drawings and as directed by the Engineer-in-charge Note: cost moulding and polishing of granite edges as required is included in the item.

Extra for nosing in edges of Kotah stone treads including 3 lines/row of statdnadrd antislippery grooves cutting per tread

230 mm thick rubble soling stones Supplying, stacking and laying of 230 mm thick rubble soling stones as under floor base including packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, moorum etc. complete all as per specifications and as directed by the Engineer-in-charge

300mm thick rubble soling stones Supplying, stacking and laying of 300 mm thick rubble soling stones as under floor base including packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, moorum etc. complete all as per specifications and as directed by the Engineer-in-charge

150 mm thick rubble soling Supplying, Stacking and Laying of 150 mm thick rubble soling stones as under floor base including packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, moorum etc. complete all as per specifications and as directed by the Engineer-in-charge

PCC 1:3:6 Providing and laying in position cement concrete of 1:3:6 (1 cement, 3 crushed sand, 6 graded stone aggregate of maximum size 20 mm) including consolidation, finishing, curing etc. complete as per specificationsand drawings but excluding the cost of Form work shuttering, centering Complete at all levels

PCC 1:1.5:3 Providing and laying in position cement concrete of 1:1.5:3 at all levels (1 cement, 1.5 crushed sand, 3 graded stone aggregate of nominal size 20 mm) including consolidation, finishing, curing etc.. complete as per specifications and drawings but excluding the cost of shuttering, centering and steel reinforcement.

Precast cement concrete 1:2:4 in kerbs Providng and fixing at and near ground level ready made precast cement concrete 1:2:4 in kerbs stone for edgings etc. as per approved patterns and setting in position with C.M 1:3 (using crushed sand) including consolidation, curing, cost of required centering, shuttering, finishing smooth with 6 mm thick cement plaster 1:3 (using crushed sand) on exposed surfaces complete as per specifications and as directed by the Engineer-in-charge

Reinforced cement concrete M-30 Providing and laying in position Reinforced Cement Concrete (RCC) of grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications up to Plinth Level.

Extra for RCC& PCC Using Ready Mix Concrete from outside project area including transporting and pumping from approved batching plants .

Shuttering Form work Providing , centering ,shuttering Form work using PVC Film faced plywood to get a neat form finish surface for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings and specifications at all levels. For Sub - structure.

Brick work Providing and constructing Brickwork in cement mortar 1:4 using crushed sand with Flyash/ Flyash Lime bricks with minimum 70 kg/ sq.cm strength of approved make and size in super structure up to and including Floor II Level including, scaffolding, raking out joints, curing, cleaning complete all as per specifications and drawings.

20 mm thick External plastering Providing 20 mm thick plastering using Ready mix external plastering compound of approved make for external faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning scaffolding up to 10 metres height complete.all as per specifications including forming drip moulds wherever necessary and as directed by the Engineer-in-charge

Forming of grooves in plastering Forming of grooves of uniform size from 12 mm X 12 mm to 25 mm X 15 mm in plastered surfaces as per approved pattern using wooden batterns, nailed to the under layer including removal of wooden batterns, repair to the edges of plaster panels and finishing the groove complete as per specifications and as per the direction of Engineer-in-charge.

50 mm thick cement concrete flooring Providing and laying 50 mm thick cement concrete flooring with concrete hardner topping under layer 38 mm thick cement concrete 1:2:4 and top layer 12 mm thick wearing surface with metallic floor hardner, cement being mixed with metallic floor hardner of approved quality and make in the ratio of 4:1 (4 cement and 1 metallic floor hardner) by weight and this cement hardner compound mixed with 6 mm down graded stone aggregate in the ratio of 1:2 by volume including providing and fixing 25 X 3 mm aluminium strip,This includes cost of cement slurry, finishing to the required finishing and cleaning neatly while handing over the areas etc. complete as per specifications and drawings.

60 mm thick paver block/Tiles Providing and laying 60 mm thick factory made cement concrete interlocking paver block/Tiles of M-30 grade made with strong vibratory compaction and approved size, shape, design laid in required colour and pattern over and including 50 mm thick compacted bed of crushed sand, filling the joints with crushed sand etc. all complete as -per the direction of the Engineer-in-charge

M-12 X 145 mm Long Anchor Fastners Providing and Fixing Anchor Fastner of approved make including drilling in concrete as per requirement for fixing Eps or other structures all as specified by the manufacturer complete all as per specifications and drawings. HST STUD Type M-12 X 145 mm Long

HST-R M-10 X 130 mm Long Anchor Fastners Providing and Fixing Anchor Fastner of approved make including drilling in concrete as per requirement for fixing Eps or other structures all as specified by the manufacturer complete all as per specifications and drawings. HST-R STUD/wedge Type M-10 X 130 mm Long

Epoxy paint on Steel surface Providing and painting two (or) more coats with Epoxy paint at all locations prepared and applied as per manufacturer' specifications including a priming coat if specified by the manufacturer, preparation of surface by cleaning with wire brush and rubbing with sand paper to remove dust, dirt etc, after first coat Epoxy based trowelling compound if required, including preparation of the surface by scrapping, applying sand paper,by cleaning with wire brush and rubbing, making free of rust, dirt etc. filling the holes, joints, cracks if any, scaffolding etc. complete.all as per manufacturers technical data and as directed at site to acheive 200 micron film thickness (50 micron primer coat + 150 micron finishing coat). ON STEEL SURFACE

Velvet paint Providing, applying wall painting two coats with Velvet paint of approved brand to give an even shade over a coat of cement primer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

White cement based wall putty Providing and applying white cement based wall putty of approved make over concrete or Plastered surface up to 3 mm thick to get uniform surface free from undulation including cleaning complete all as directed by the Engineer-in-charge

GI chain link fabric fencing Providing and fixing GI chain link fabric fencing Made of GI wire of dia 4 mm of required width in mesh size 50 x 50 mm including strengthening with 2mm dia wire or nuts, bolts and washers as requeid complete as per direction of Engineer-in-charge.

Stainless steel concertina of 600 mm dia Providing and fixing Stainless steel concertina barbed tape coil of 600 mm dia. made from stainless steel ribbon tape of 0.5 mm thickness, 19 mm width stretching the coil to 9 m approximate, fixing the coil with clips between "Y" armed and MS angle posts 2.44 m high from ground level, including supplying and fixing SS galvanized clips etc. complete as per manufacturer's specification and including painting by dipping method the concrtina tape coil with two coats of synthetic enamel paint of approved shade and make over a coat of approved primer at fabrication shop, before bringing the material to the site and fixing in position etc. complete as directed by the Engineer-in-charge.

With S.S. barbed wire 12 swg Fencing with RCC post placed at required distance, embedded in cement concrete blocks every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire 9.38 kg per 100 metres (min) between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post etc. complete as directed by the Engineer-in-charge. (cost of RCC posts, struts, earth work and concrete to be paid for separetely) : Payment to be made per metre cost of total length of barbed wire used. With S.S. barbed wire 12 swg

Refixing shahabad stone Refixing old rough Shahbad Stone of minimum 50 mm average thickness of size 600 X 600 mm (Approximate) laid in required line, level, curvature, colour and pattern over 50mm thick stone dust backing (providing and laying of stone dust included in item) including setting in position in footpath to the required level and line Pointing with C.M 1:4 (using crushed sand). Joint shall be upto 25 mm wide including filling of joints with cement mortar and making grooves etc. complete as per the direction of Engineer-in-charge etc. all complete as per the direction of Engineer-in-charge. ((Note: Intact /un broken old shahabad stone removed under relevant item)

Providing and fixing Shahbad Stone Providing and fixing Rough Shahbad Stone of minimum 50 mm average thickness of size 600 X 600 mm (Approximate) over 150 mm thick (consolidated thickness) stone dust backing including setting in position in footpath to the required level and line Pointing with C.M 1:4 (using crushed sand). Joint shall be 20 to 25 mm wide including filling of joints with cement mortar and making grooves etc. complete as per the direction of Engineer-in-charge

Clearing Jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1m above ground level and removal of rubbish up to a distance of 50 m / outside the periphery of the area cleared as per specifications and as directed by the Engineer-in-charge.

Dismantling Bituminous road Dismantling Bituminous road including stacking of serviceable materails and disposal of unserviceable materials within 200 m lead

Dismantling plain cement concrete Dismantling plain cement concrete manually / by mechanical means carefully without damaging adjacent structures including disposal of debris within 200 m lead as per direction of Engineer-in-charge

Dismantling rolling shutter Dismantling doors, windows and clear storey openings (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100 m lead (full windows) Area beyond 10.00 Sq.M

Dismantling stone slab flooring/Paving tiles Dismantling stone slab flooring/Paving tiles of thickness upto 60mm laid in cement mortar including stacking of serviceable materials and disposal of unserviceable materials within 200 m lead

Dismantling steel work Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismantling and stacking within 100 m lead

Dismantling concertina and barbed wire Dismantling concertina of 610mm dia alongwith 10 set of barbed wire / flexible wire rope in fencing including making rolls and stacking within 100 m lead

Dismantling roofing Dismantling roofing including ridges, valleys and gutter etc and stacking the material within 50 m lead G.S Sheet / FRP Sheet / AC Sheet

Lead charges Lead charges for lead Exceeding 2 KM but not exceeding 3 KM, by mechanical transport including loading, unloading, stacking / levelling etc.

Soil/tiles/debris/civil scrap excluding metal Lead charges for lead exceeding 4 KM not exceeding 5 KM, by mechanical transport includinmg loading,unloading, stacking / levelling etc. Note: The rates are applicable for NET Quantities arrived at after making deduction for voids @ 20% in respect of soil and @ 50% in respect of Rock, voids @ 30% for debris from corresponding TRUCK Measurement

All types of metal/wooden scrap materials to BARC’s scrap yard situated at TV stores.

SUNIL CONSTRUCTION