WELCOME MAINT OF HAJI PIR PATH DUNN MARG GEN ROAD OFFICE MD ACCN AND CB LINE JCOSOR MD ACCN INCL REPAIR TO INTERNAL WIRING

Amount

Preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and one coat of white wash on walls complete all as specified and directed.

All as per item No. 1 above but on ceiling complete all as specified and directed.

M&L complete removal of old decorated surface of wall and applying two coat of oil emulsion distemper white/coloured over and including one coat of birla wall care based putty (where it is required) all as specified and directed by Engr-in-Charge. Note:- Putty shall be measured and paid seperately under Srl Item No. 12)

Preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and apply one coat of oil emulsion distemper all as specified and directed.

Preparation of old painted surfaces of wood/wood based materials exc 10cm width or girth and applying one coat of synthetic enamel paint as directed and specified.

All as per item No. 5 above but on steel surfaces complete all as specified and directed.

M&L complete removal of old decorated surface of wall and applying two coat of exterior weather proof water base emulsion paint white/coloured over a coat of oil base base primer over one coat of white cement based putty (where it is required) all as specified and directed. Putty shall be measured and paid seperately under Srl Item No. 12)

Preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying one coat of exterior weather proof water base emulsion paint white/coloured over a coat of oil base base primer over one coat of white cement based putty (where it is required) all as specified and directed. Putty shall be measured and paid seperately under Srl Item No. 12)

M&L complete removal of old decorated surface of wall and applying two coat of interior plastic imulsion paint white/coloured over and including one coat of white cement based putty (where it is required) all as specified and directed by Engr-in-Charge. Note:- Putty shall be measured and paid seperately under Srl Item No. 12)

M & L for preparation of old decorated surface of wall including brooming, down, scrapping down smoke spot and stopping nails mark by filling by birla putty and applying one coat of interior plastic imulsion paint white/coloured all as specified. Note:- Putty shall be measured and paid seperately under Srl Item No. 12)

M&L french polishing on surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler on old surface with one or more coats as specified and directed.

M&L one coat of 3mm thick wall care putty on walls/ceiling all as specified and directed

Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, applying Asian Royale play textured wall paint , design approved by Engineer-in-charge over and including one coat of white cement based putty complete all as specified and directed.

Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store yard and rubbish of the primeses complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land all as specified and as directed .

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.50mm graded crushed stone aggregate as in sub base, levelling course, etc complete all as specified and as directed.

M&L for 40mm thick PCC type B1 (1:2:4) using 20 mm graded stone crushed stone aggregate as in flooring complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to matchand including 15mm thick screed bed or bedding layer in CM (1: 6) complete all as specified and as directed.

M&L for non –skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1: 6) complete all as specified and directed.

M&L for non –skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1: 6) complete all as specified and directed.

M&L for scratch free vitrified ceramic tiles 10mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

All as per item no 21 above but as in skirting/ dado etc with and including 10mm thik backing coat in cement mortar (1:4) an wall complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 300x250x7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over 10 mm thick backing coat on fair faces of brick work in CM (1:4) complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 450x350x7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over 10 mm thick backing coat on fair faces of brick work in CM (1:4) complete all as specified and as directed.

M&L for 75 mm thick PCC (1:4:8) type D-2 using 40mm graded stone agregate sub base of floor etc complete all as specified and directed

M & L for 75mm thick cement concrete (1:3:6) type C2, with using 40mm graded stone aggregate as in floor/ plinth protection finish the surface even and smooth without using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified and as directed.

M&L for chequered cement concrete tiles with grey cement and pigment of size 25cmX25cmX25mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for chequered cement concrete tiles with grey cement and pigment of size 40cmX40cmX30mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for Endura joint free colour tiles 8 to 10 mm thick (square/rectangular) area of each tiles not exceeding 0.11 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles.Make Johnson endura

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc

M & L for machine cut kota stone slab flooring 20 to 25mm thick (size not less than 550mm x 550mm) laid & jointed with grey cement mixed with pigment to match the shade of slab including rubbing and mirror polishing finished laid over and including 20mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

M & L for machine cut kota stone slab flooring 18 to 20mm thick as in riser of step, dado and skirting over and including 10mm thick (1:4) CM backing coat on vertical surface of wall with rubbing and mirror polishing finished complete all as specified and as directed.

M&L for 15-18 mm thick green marble of approved quality of any size set and jointed in grey cement slurry laid over and including 15 mm thick screed bed in CM (1:4) including granite polish to be done by mechanical grinder and moulding edges compete all as specified and as directed.

M&L for 18 mm thick Black granite slab of approved quality of any size bedded and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15 mm thick screed bed in CM (1:4) including granite polish to be done by mechanical grinder and moulding edges complete all as specified and directed.

M & L for stain cutting or grinding of terrazoo flooring / kota stone flooring and other stone flooring of any description and in any position, mirror polishing by machine in horizontal or vertical surface complete all as specified and as directed.

Dismantling water tanks of any size or capacity and removing to store

S&F 500 ltrs capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I

S&F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I

S & F in repairs water tank covers for 500 to 1000 ltrs capacity of water tank incl all fittings and locking system of cover complete all as specified and as directed.

S&F in repair of 15mm bore valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. ( Min Weight 15mm-142 gms)

S&F in repair of 20mm bore valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. ( Min Weight 20mm-210 gms)

Taking up or down 15 mm dia old serviceable / unserviceable steel tubing any grade and connections cleaning for re-fixing complete all as specified and directed .

All as per item no 42 above but 20mm bore complete all as specified and as directed.

S&F steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,for 15mm bore pipes complete all as specified and as directed.

All as per item no 44 above but 20mm bore complete all as specified and as directed.

S&F in repairs 15 mm CP long neck bib taps screwed down high pressure chromium plated screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15 mm bib taps cast copper alloy, screwed down high pressure chromium plated screwed for iron pipe and fixed complete all as specified and directed.

S&F 15 mm bib cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed in repairs complete all as specified and directed by engr in charge.

S&F in repair stop valves fancy type chromium plated with long shanks fixed with 15 mm dia bore pipes complete all as specified and as directed.

S&F in repair pillar taps (swarn neck type) cast copper alloy with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specified and directed.

S&F in repairs 15 mm stop cock cast copper alloy, screwed down high pressure chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs 15mm wall mixture with provision for bath telephone shower and overhead shower all as specified and directed. Make. Prayag or Jaquar or equivalent.

S&F 15 mm wash basin mixutre, centre hole, mixing hot & cold water, fancy type, cast copper alloy, chromimum plated with capstan head, chromium plated, screwed down high pressure, screwed for iron pipe etc and fixed in repairs complete all as specfied and directed by engr in charge.

S&F in repairs concealed stop valves fancy type chromium plated with long shanks and cup fixed with 15 mm dia bore pipes complete all as specified and as directed.

S&F in repairs Stainless steel sink, 1.00mm thick for kitchen, with plug, washers and wastes/coupling, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm with bowl size 410mmx 330mmx 160mm fixed complete all as specified and directed.

S&F in repair of stain less steel plate rack for kitchen 1 mm thick of best quality with suitable hanging arrangement and fixed to wall complete all as specified and as directed by Engineer-in-Charge.Note:- Size of plate rack should not be less than 900x1200 mm and weight of rack shall not be less than 8.5 Kg each.

S&F in repairs PVC low level flushing cistern of 10 Litres with all internal fittings incl flush pipe and fixing to supply pipe

Taking down and re-fixing WHB/flushing cistern/EWC/ kitchen sink and similar items at same or other location, including cutting for ends and pinning in and ends of brackets or erecting stand but exclusive of fixing of supply and waste pipes,etc complete all ass specified and as directed.

S&F in repair vitreous china wash down water closet pedestal pattern white excluding flushing cistern and flush pipes complete all as specified and as directed .

S&F in repair vitreous china squatting pan `Orissa ' pattern of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipes) including connection to trap and to flush pipe etc and lime concrete bedding including 'P' or 'S' trap complete all as specified and as directed.

S&F in repair health faucet with flexible pipe of one mtr length including wall hook for EWC complete all as specified and as directed. .

S&F in repair flexible type PVC waste pipe 32 mm bore of pipe for WHB/SINK/urinal, etc complete all as specified and as directed.

S & F in repairs PVC (SWR) floor trap plain or multi with stainless steel grating incl joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified and as directed.

S&F in repairs of brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets etc as in repair complete all as specified and directed.

S& F in repair CP towel ring, dia not less than 200mm complete all as specified and directed.

S& F in repair CP toilet paper holder complete all as specified and as directed.

S&Fixed in repair 125 mm size chromium plated shower rose with siwel joint suitable for 15 mm bore GI pipes comlete all as directed..

S&F in repairs Plastic water closet seat cover, any colour, closed pattern with flat bottom, and mild steel chromium plated for aluminised hinging device complete.

S&F in repair CP Jet spray suitable for 15mm bore with connecting pieces including all necessary fittings and accessories as directed by Engr in Charge. Make Prayag or equivalent

M&L fixed in repairs wash basins, vitreous China white flat back size 580x450mm size, including cutting for and pinning in ends with & incl MS adjustable brackets or erecting stand complete all as specified and directed.

S&F in repair of PVC connections 15mm size with PTMT nuts of length 450mm.complete as in repairs.

S&F in repair of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

S&F in repair corner glass shelf (with bracket) all as specified and directed

S&F in repair 150 mm long ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

S&F CP grating 100mm dia complete all as specified and directed..

S&F in repair 25 mm dia mild steel PVC coated drappery curtain rod with brass /nickel chrom polish bracket complete all as specified and directed .

S&F for CP waste coupling of size 32 mm dia WHB with long screwed shanks and fly nut fixed in repair complete all as specified and directed.

S&F for CP waste coupling of size 40 mm dia WHB with long screwed shanks and fly nut fixed in repair complete all as specified and directed.

S&F in repair prelaminated particle board 18/19mm thick interior grade, prelaminated on one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame works as in cupboard shutter / cupboard shelves, pelmet, with and including external teak wood lipping 6mm thick and 18/19mm wide fixed with nails on edges complete including hinges & handles all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty of fixed with beads including and Supply and Fixing of sheet glass plain ordinary quality 3.00 mm thick and glazing with oil putty/Bead not exc. 0.50 sqm in each pane complete all as specified and directed.

S & F in repair galvanized mild steel wire clothes 0.56 nominal dia of wire and average width of aperture 1.18mm fixed with beading complete all as specified and directed.

M&L Shutters and resecuring of easing and adjusting without taking down n exc 1.0 sqm each

M&L Shutter and resecuring of easing and adjusting without taking down exc 1.0 sqm but nexc 2.0 sqm each

S&F in repair 100mm aluminium anodised, barrel tower bolt of extruded section.

All as per item No 86 above but 150mm long

S&F in repair aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruted section and fixing bolt and sliding bolts of extruded section and cast iron - aluminium alloy 300 mm long.

S&F in repair 150 mm long aluminium handles, cast type, anodised fixed to shutters complete all as specified and directed by Engr in charge.

S&F in repair 100 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F in repair 75 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F in repair 50mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

Cleaning and removing all dirts and scales from service water tanks and from mouth of circulating pipes etc capacity of tank exceeding 250 ltr but not exceeding 500 ltr complete all as specified and directed.

All as per item no 93 above but exceeding 500 ltr but not exceeding 1000 ltr capacity complete all as specified and directed.

M&L in repair for steel work in tubular trussles, purlins, rafter, tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-1161-1979 grade ST-240 complete all as specified and as directed.

S&F in repair 0.50mm thick (including coated thickness) pre-colour pre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed.

M & L for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces exc 10cm width or girth over a coat of red oxide zinc chrome primer including preparation of surfaces complete all as specified and as directed.

Cutting chases in brick wall built in cement mortar for concealed water tubing and making good with cement mortar (1:4) ,cutting depth not exc 10 cm complete all as specified and directed.

M&L Taking down cement plaster on brick or stone walls, etc. with raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed

Demolition of brick work built in cement mortar of any description including all quions arches, pillars, etc complete all as specified and directed.

M & L for brickwork with sub class 'B' modular bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and as directed.

M&L brick work in CM ( 1:4 ) with using sub class `B ` modular half brick work straight or curved on plan exceeding 6.0mtr mean radius complete all as specified and directed.

M&L for rendering 10 mm thick in CM ( 1:6 ) on wall/ concrete surfaces finish even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM ( 1:4 ) on wall/ concrete surfaces finish even and smooth without using extra cement using WPC compound complete all as specified and directed.(Note:Supply only WPC shall be measured and paid separetly)

M&L for 5 mm thick plaster on ceiling in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed .

Supply only Liquid water proofing compound complete all as spesified and directed.

M&L for applying two coat of oil bound distemper over a coat of 1-2mm thick wall care putty (JK/Birla) on new plaster surface of walls after -preparation of surfaces.

M&L preparation of newly plastered surface and using sand paper to have even and smooth surface and applying 1-2mm thick JK/BIRLA white putty on prepared surface and applying two coats of weather coat paint (Weather coat Exterior emulsion )manufactured by Berger' or Asain Apex white or tinted over a coat of white water base primer complete all as specified and directed by Engr in charge.

M & L for preparing new surfaces of wall and applying three coats of white wash on ceiling and cornices complete all as specified and directed.

S&F in repair 40mm dia cupboard knobes fixed with nuts, screw and washer of MS, bright finshed

S&F in repair of floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor

Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60kg and fixed

S&F in repair Mild Steel Door Spring 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete

S&F in repairs of Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane including required

Taking down shutters of any description n.exc 1.0 sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1.0 sqm but n.exc 2.0 Sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area n. exc 1.5 sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area exc 1.5 but nexc 4.0 sqm each complete all as specified and as directed.

S & F for 2nd class hard wood as in plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

S&F for IInd class Hard wood 35 mm thick glazed and skeleton(doors) shutters, open rebated and prepared to receive glass gauge etc, (with sash bars) edges of framing plain, chafered or rounded , fitted with cut and mitred beads for securing glass etc, size of members of shutter as specified in SSR Part I, Section 8, clause 8.2 (b) Supplied and fitted to chowkats complete all as specified and directed.

S&F for 30mm thick factory made, 2nd class hard wood,glazed and skeleton shutters, open repeated and prepared to receive glass,gauze etc (with sash bars) edges of framing plain, chamfered or rounded ,fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR part-I section 8,clause 8.24 (b) and for window and fixed with chowkats, chemically pressure treated complete all as specified and as directed.

S&F for 35mm thick 2nd class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board wiyh commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified and as directed.

S & F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F for factory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour PVC sheet reinforced with ms square tube, with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed.

S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of ms tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.

S&F 100 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 75 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

M&L 300 mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified

Supply and fix stainless steel butt hinges 100mm size medium weight and fixed as directed and specified.

Supply and Fix Aluminium anodised barrel tower bolts of extruded section, 150mm long as specified.

Supply and Fix Aluminium anodised barrel tower bolts of extruded section, 200mm long as specified.

Supply and Fix Extruded aluminium alloy handles fabricated type anodised 100 mm size as specified.

Supply and Fix Extruded aluminium alloy handles fabricated type anodised 150mm size as specified.

Supply and fix second class hardwood small fittings such as door and window stops and the like n.exceeding 200 cucm each fixed as directed and specified.

S & F for galvanoised mild steel wire cloth of 0.56mm dia wire and average width of aperture 1.18mm & fixed with tacks or galvanised I wire staples,etc complete all as specified and as directed.

M & L for sheet glass 3.0 mm thick ordinary quality and glazing with oil putty, in squares n. exc 0.5 Sq.M in each pan complete all as specified and directed.

M & L for figured glasspine head type 3.0 mm thick ordinary quality and glazing with oil putty, in squares n. exc 0.5 Sq.M in each pan complete all as specified and directed.

M & L Preparing new or previously untreated surfaces of wood and wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer with and including wood putty as directed.

M & L for Point wiring in repairs with FR PVC insulated PVC unsheathed electric cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling instead of pvc conduit surface casing caping will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs excluding galvanised boxes and bakelite sheet used for mounting switches, sockets, fan regulators etc for the following :-

(a) One light point/fan point controlled by one switch

(b) One bell point controlled by one switch

(c) One 5amps socket out let point controlled by one switch on same board with other switches.

(d) One 5amps socket out let point on independent board controlled by one switch.

All as per item no-139 here in before but using pvc insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 2.5 Sq mm green PVC insulated cable for 15 amps socket point on independent board controlled by one switch.

Supply and fix in repairs Modular Switch flush type 6 Amps single pole, one way complete all as specified. Make: Legrand Mylinc Series, Anchor Roma (Plus Series), Crabtree Athena Series.

Supply and fix in repairs Modular Socket outlet, multi purpose, 2/3 Pin combined 6 Amps flush type complete all as specified. Make: Legrand Mylinc Series, Anchor Roma (Plus Series), Crabtree Athena Series.

Supply and fix in repairs Modular Bell push flush type,6 Amps complete all as specified. Make: Legrand Mylinc Series, Anchor Roma (Plus Series), Crabtree Athena Series.

Supply and fix in repairs Modular Socket outlet, multi purpose, 2/3 pin combined 16 Amps universal socket complete all as specified. Make: Legrand Mylinc Series, Anchor Roma (Plus Series), Crabtree Athena Series.

Supply and fix in repairs Modular Switch 16 Amps single pole, one way complete all as specified. Make: Legrand Mylinc Series, Anchor Roma (Plus Series), Crabtree Athena Series.

Supply & fix in repairs modular fan regulator, 2 module step type complete. Make: Legrand Mylinc Series, Anchor Roma (Plus Series), Crabtree Athena Series.

Supply and fixing in repairs white finished single mounting modular plates sutable for modular accessories of following sizes:(Make: Legrand Mylinc Series, Anchor Roma (Plus Series), Crabtree Athena Series.).

(a) Sutable for 1/2 modules

(b) Sutable for 3 modules

(c) Sutable for 4 modules

(d) Sutable for 8 horizontal modules

Supply and fix in repairs sheet metal boxes concealed in wall suitable for housing modular accessories of following sizes :-(Make: Anchor Roma (Plus Series) / Crabtree Athena / Legrand Mosaic Series.

(a) Sutable for 1 or 2 modules 50mm.

(b) Sutable for 3 modules 50mm.

(c) Sutable for 4 modules 50mm.

(d) Sutable for 8 modules 50mm.

S&F switch in repairs piano flush button single pole one way 5 Amp 240 volt complete as directed. Make :- Anchor , Havells , Legrand

S&F in repairs socket outlet flush type 5 pin, 5 amps, 230 volts complete all as directed. Make :- Anchor , Havells , Legrand

S&F in repairs switch piano flush button single pole one way 15 Amp 240 volt complete as directed. Make :- Anchor , Havells , Legrand

S&F in repairs socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts complete as directed. Make :- Anchor , Havells , Legrand

S&F in repairs ceiling rose surface bakelite three terminal complete all as directed. Make :- Anchor , Havells , Legrand

S&F in repairs lamp holder insulated body with back plate for batten fittings complete all as directed. Make :- Anchor , Havells , Legrand

Supply and fix in repairs Bell, ding dong type, AC 230 Volts,single pole complete. Make :- Anchor , Havells , Legrand

Supply & fix in repairs electronic Fan regulator step type, socket type complete .Make :- Anchor , Havells Reo, Legrand.

Supply and fix in repairs integrated LED tube light fitting 1x18/20 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square boxes including taking down the existing complete all as specified and directed. Make:- Havells Cat No. LHEXBLP7PN1W018 , Crompton Cat Pt No. LCTL-18-CDL, Bajaj Cat Pt No BCLSB 18WH.

Supply and fix in repairs integrated LED tube light fitting 1x9/10 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square box including taking down the existing complete all as specified and directed .Make:- Havells Cat No. LHEXBLP7IN1W009 , Crompton Cat Pt No. LCTL-09-CDL, Bajaj Cat Pt No. BCLSB 10WH.

Supply and fix in repairs Wall light fittings suitable for CFL 15 watt with & including LED bulb of 7 watt, including connection with all necessary fixing accessories complete all as specified and directed by Engr-in-Charge. Make :- Havells Cat No. LHDL07150099 or equivalent in equivalent in Bajaj, Philips.

Supply & fix in repairs LED Bulk Head luminaire 10W, 6000K pressure die cast housing with IP65 protection complete with electric connection all as specified and directed by Engr-in-Charge. Make:- Havells Cat No. HEXAFT10WLED857SSYMBOPC, Crompton Cat No. LBH-10-CDL, Bajaj Cat No. BIBWP 10W LED

S&F in repairs Surface mounted round shaped LED downlighter with durable housing with Al heat sink with diffuser to give glare free light with removable driver of 12 W 6500K complete with driver duly connection with copper cable etc. Make, Havells Cat No. LHEAABP7IL1W012 or equivalent in Crompton, Wipro, Philips

Supply and fix in repairs LED street light fittings 1x25 Watt, 5700K complete fitting having pressure dia cast aluminium housing with heat resistant toughened glass & IP 65 protection fixed on and including sufficient length and appropriate size GI bracket with all accessories duly connection with three core flexible copper cable complete all as specified and directed .Make:- Havells Cat No.ENDURAPEARLSL25WLED757SASYTOPCMP Crompton Cat No. LSTO-25-CDL, Bajaj Cat No. BCLST 25W LED IV2

M&L in repairs for Sub main wiring in repairs with two runs of single core PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including surface non metallic rigid PVC conduit not less than 25mm dia and all fittings like bends, tees, saddles etc including one run of PVC insulated unsheathed 6.0 sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete.

M&L in repairs for Sub main wiring in repairs with two runs of single core PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in and including surface non metallic rigid PVC conduit not less than 25mm dia and all fittings like bends, tees, saddles etcincluding one run of PVC insulated unsheathed 4 sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete.

M&L in repairs for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit of not less than 25 mm dia concealed in wall by cutting chases of wall and making good the disturbed surface, including PVC insulated unsheathed 6.0 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly from main distribution board complete all as specified and directed by Engr-in-Charge.

M&L in repairs for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit of not less than 25 mm dia concealed in wall by cutting chases of wall and making good the disturbed surface, including PVC insulated unsheathed 4.0 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly from main distribution board complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs double door SPN DBs eight way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified and directed by Engr-in-Charge. Make: Havells, Legrand, L&T

S & F in repairs MCB SPN 6 to 32 amps 10 KA, 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge. Make: Havells, Legrand, L&T

S&F in repairs MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' type including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge. Make: Havells, Legrand, L&T

Supply and fix in repair Sheet metal earth plug, socket, single pole with MCB SP 20 Amps 240 volts complete all as specified and directed by Engr-in-Charge. Make: Havells, Legrand, Indo-Asian

sabir and brothers

m/s modern builder

Chitragupta Construction

Sharad Enterprises

SUNRISE ENTERPRISES