Renovation of Administrative Building at JPA, Hazaribag in the District of Hazaribag

Amount

Section I Building Work

Dismentling old plaster and pointing in cement or lime and raking out joints to 15mm . Depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I.

Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Providing two coats of plastic emulsion paint of approved make & shade over a coat of cement primer over new surface including preparing the plastered surface by rubbing, smooth with pumic stone or fine sand paper, aplying putty wherever required, scaffolding , washing of flores and taxes etc. all complete as per building specification direction of E/I.

Taking Down old door and windows shutters including stacking serviceable materials within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Supplying , fitting and fixing M.S. grill made of 20x6 mm flat as per approved design and drawing properly fabricated with joints continuous fitted welded and finished smooth , hoisting as per building specification and direction of E/I.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments,pillers, posts, struts, buttresses, string or lacing coures, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc, up to floor five level, excluding the cost of centering, shuttering and finshing: 5.3.2.1 1:1.5:3 (1 cement : 1.5 coarse sand (zone III) : 3 graded stone aggregate 20mm nominal size).

Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I

Providing 2 coats of Synthetic Enamel Paint of approved shade and make over steel surface grills & railings including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I.

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.

Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250 mm apron including cost of earthwok involved with 75mm cement concrete (1:4:3) over one brick designation 75A, flat soling in proper grade and slope at th base, he drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

110 mm diameter

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4(1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Providing and laying 15 mm - 23mm thick Kotah stone slab riser steps of approved size, texture and colour over 19 mm thick base of lime morter (1:1:1 ) lime putty:surkhi:coarse sand over and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete job as per specifications and direction of E/I. (iv) 600 x 600 mm size

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 11.56.1 Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 8.2.1 Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble

Providing edge moulding to 18 mm thick marble stone counters, Vanitiesetc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 8.3.2 Granite work

Supplying, fitting & fixing 30mm thick solid core type decorative single leaf flush door shutters in doors with both side decorative venier with black board core bended with high quality in all formaldehyde synthetic resin of standered with aluminium fittings such as hinges, tower bolts, handle, cleats aldrop, door stopper & sand blocks & taxes all complete as per detail drawing building specification & direction of the E/I.

French spirit polishing : 13.68.1 Two or more coats on new works including a coat of wood filler

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and Laying 6 mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing taxes, and royalty all complete as per building specification and direction of E/I. 5.6.23.1 With "A" grade white 15X15 cm tiles

Grading roof for water proofing treatment with 22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20mm nominal size)

Providing & supplying Cico liquid / impermo water proofing compound in cement concrete or cement mortar @ 2% of cement quqntity by weight ( as specified) for water proofing, including all carraige and taxes .

Providing and laying APP (Atactic Polypropylene Polymer) modifiedprefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through theauthorised applicator of the manufacturer of membrane :

Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation.

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded. 542 SUB HEAD : 26.0 NEW TECHNOLOGIES AND MATERIALS star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 26.86.1 Frame size 45 x 70 mm

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding

Supplying fitting and fixing foam Carpet all complete as per detail drawing building specification & direction of the E/I.

Labour for cutting old marbles etc

Carriage of materials by truck or by any mechenical means loading,unloading & stacking etc. all complete job as per direction of E/I.

Bricks

Stone Chips

Stone metal

Cement

Water Supply and Sanitary work

Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. 'P' trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32mm alkathene/ P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of vitreous white glazed earthenware footrest to be fixed in floor 15mm C.I. body brass spindle stop cock of weight not less than 50 grms, 15mm P.V.C. connection pipe 450 mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specificatin and direction of E/I. (A) 580 mm long (C) with 10 ltrs. low level P.V.C. Cistern

Supplying fitting and fixing 40mm high vitreous white glazed earthen E.W.C with Ptrap of parry/Hindustan or any other approved I.S.S make ineluding supplying and fixing 15 liters C.I mosquito proof low down flushing cistern of approved make with complete fittings with C.I handle and R.S or bracket wit h telescopic flush pipe with brass eoupling and plumbers joints spindle stop coci of approved quality weight not less than 450grams 15mm P.V.C alkathene pipe 45cm long with brass coupling at both ends and white /black plastic solid state seal and lead of commander / cuckoo or other I.S.S make with hinges or screws etc painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming all complete as per specification and direction of E/I. (I) With 'P' trap (b) 10 Lit Law Lavel PVC Cistern.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.9 White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISI Marked

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 17.73.1 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms

Suppling, Fitting and Fixing Flat Back or angular, liped front viterous wide glazed earthen were urinal of Hindustan / Parrywere or any other approved ISI marked with 5 litres capacity C.I. automatic flushing cistern of reliance for any other ISI approved make with all fittings with CI or RS Brackets, Standard Size G.I. flush pipe with fitting clams 15mm CI buddy brass spindle stop cock of approved quality weight not less than 400 grms, 15 mm PVC / alkthene pipe 450 mm long with brass coupling at both ends and doing plumber joints including painting of exposed part with two coats of approved paint over a primer coat of red oxide cutting wall and floor, making good the same etc. all complete as per specification and direction of E/I. (a) Flat back or standing corner (600mm x 350mm)

Providing and fixing C.P.brass long body bib cock of approved quality conforming to standard and weight not less thain 810gms.

15mm nominal bore

Providing and fixing C.P. brass angle valve for , gyser & others points of approved quality conforming to IS 8931. 18.53.1 15mm nominal bore, approved brand C.P. fittings.

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing stainless steel A ISI 304(18/8) kitchen sink as per I.S.13983 with C.I. Brackets stainless steel plug 40mm including painting of fittings and brackets cutting and making goods the walls wherever required : DSR 17.10.1 Kitchen sink with drain board DSR 17.10.1.2 510x1040 mm bowl depth 225 mm

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 18.74.2 15 mm nominal bore with 45 cm length.

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

75 mm diameter

110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Coupler 75 mm

Coupler 110 mm

Single pushfit Coupler

Single tee with door

Single tee without door

75 mm Bend

110 MM Bend

SHOE - 110MM

110 MM Shoe

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I.(Approved Brand - ASTRAL/ SUPREME)

Concealed work including cutting chases and making good the wall etc..

15mm dia

20mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Exposed on Wall

25 mm nominal outer dia Pipes

32 mm nominal outer dia Pipes

Constructing brick masonary chamber for Underground C. I. Inspection Chamber and bend with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. Cover with frame (light duty) 455X610 mm internal dimensions, total weight of cover with frame to be not less than 38 KG. (weight of cover 23 kg. and weight of frame 15 kg) RCC top slab with 1:1.5:3 mix (1 cement:1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 mix (1 cement:5 coarse sand :10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm th. with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:

Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and Fixing Hand Shower ( Health Faucet) ( ABS Body) ALD-CHR-585 Jaquar made. Hand Shower with 1 meter Long Easy Flex Tube in Chrome Finish & Wall Hook.

Pvc trap including all fittings

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Electrical Work (Block -A & C)

Point wiring in PVC conduit, with piano type switch:-Wiring for light point/fan point/exhaust fan point/call bell point with 1.5. sq.mm FR PVC Insuleted copper conductor single core cable in recessed PVC conduit, with piano type switch, pheonlic lamineted sheet,suitable size PVC/G.I.box etc.

Group C

Twin control point wiring PVC conduit with piano type switch:-wiring for Twin control point with 1.5 sq mm FR PVC Insuleted copper conductor single core cable in recessed PVC conduit, 2 way piano, switch, pheonlic lamineted sheet,suitable size PVC/G.I.box etc.as required.

Circuit/submain wiring in PVC conduit:-Wiring for circuit/submain wiring along with earth wire with the following size PVC insuleted copper conductor single core cable in recessed PVC conduit as required

4x16 sq mm+2x6 sq mm earth wire

Point rewiring wiring in existing conduit,:-Rewiring for light point/fan point/exhaust fan point/caii bell point with.,5. sq.mm FR PVC Insuleted copper conductor single core cable in exiting PVC conduit, including dismentling as required.

Group C

Twin control point re-wiring in exiting conduit :-Rewiring for Twin control point with 1.5 sq mm FR PVC Insuleted copper conductor single core cable in exiting surface/recess steel/ PVC conduit, including dismentling.as required.

Wiring in exiting conduit:- Supplying and drawing following size of FR PVC insuleted copper conductor, single core cable in the exiting surface/recessed PVCconduit as required.

2x1.5 sq mm

3x2.5 sq mm

6x6 sq mm

Teliphone wiring existing conduit:- Supplying and drawing following pair 0.5 sq mmFR PVC insuleted copper conductor, unaramed teliphone cable in existing recessed PVC conduit as required

S/F PVC conduit :- supplying and fixing of following sizes PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case recessed conduit as required .

S/F PVC/G.I. boxes :- Supplying and fixing PVC/G.I. box of following sizes on surface or in recess with suitable size of phenolic laminated sheet cover infront including painting etc as required .

121mm x173mm x 48mm deep/(6" x 8")

126mm x 277mm x61mm deep/(6" x 12")

170mm x 221mm x 48 x deep/(8" x 10")

S/F Piano type switch /socket :- Supplying and fixing following piano type switch box/cover including connections etc . As required

5/6 amps, one way switch

15/16 amps, one way switch

3pin 5/6 amps, socket outlet

15/16 amp 6 pin socket outlet

15/16 amps 6 pin ss combined

Teliphone socket with shutter outlet

Electronic step fan reguletor, mini

S/F power plug point with piano type accessories:- Supplying and fixing suitable size G.I.box in recess whit phenolic lamineted sheet cover in front including providing and fixing 5 pin, 15/16 amps socket outlet and 15/16 amps piano type switch conection painting etc, as required.

S/F ceiling rose:- Supplying and fixing 2 pin 5 amp, ceiling rose on the existing junction box/wooden block including connection etc as required.

S/F Batten holder:- Supplying and fixing batten/angle holder including connection etc, as required.

S/F Dingdong Call bell :- Supplying and fixing dingdong call bell suitable for DC/AC single phase,230 volt, complete as required.

ITC fluorescent fitting directly on surface:- Instaliation, testing and commissioning of prewired, fluorescent fitting of all types, complete with all accessosries and tube etc. directly on ceiling /wall including connection with 1.5 sq mm.FR PVC insulated, copper conductor.

ITC ceiling fan:- Instaliation, testing and commissioning of ceiling fan including wiring the down rod of standard length( uptwo 30 cm) with 1.5 sq mm.FR PVC insulated copper conductor, single core cable etc as required

ITC exhaust fan up to 450 mm, sweep:- Installation of exhaust fan up to 450 mm. sweep in the exiting opening, including making the hole to suit the size of above fan, making good the damage, connection testing commissioning etc as required.

S/F MCCB in cubical panel board:- Providing and fixing following rating and capacity four pole MCCB in existing panel bord,including drilling holes in cubical panel making connections etc as required.

160 amps, 35 KA fixed thermal seting FOR FEEDER PANEL

400 amps, 35 KA fixed thermal seting FOR FEEDER PANEL

S/F Busbar chamber :- Providing and fixing following capecity busbar chamber with 4 strips of suitable size of copper, heavy duty, complite with all accessosries including connections, earthing the body , etc as required.

400 amps FOR FEEDER PANEL

S/F 'B' series. S.P.MCB:- Supplying and fixing 6 amps to 32 amps rating,240 volts, 'B' series miniature circuit breaker suitable for lighting and others loads of following poles in the exiting MCB DB complite with connections. Testing and commisioning etc as required.

6/32 amps,single pole, "B" SERIES

S/F 'C' series. S.P.MCB:- Supplying and fixing 6 amps to 32 amps rating,240 volts, 'C' series miniature circuit breaker suitable for lighting and others loads of following poles in the exiting MCB DB complite with connections. Testing and commisioning etc as required.

6/32 amps,single pole, "C" SERIES

40 amps,TPN

50/63 amps, TPN

G.I Earth pipe electrode with salt charcoal :- Earthing with G.I. earth pipe 4.5 mtr long,40mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required. with salt charcoal or coke. FOR LIGHTNING ARRESTOR

Copper Earth plate electrode:- Earthing with copper earth plate 600mmX600mmX3mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required.( with salt charcoal or coke) FOR MAIN PANEL AND FEEDER PANEL

S/L 8 SWG copper wire ground :- Supplying and laying 8 SWG copper wire 0.50 metre bellow ground level for conductor earth electrode, including soldring etc. as required.

P/F G.I. lightning conductor finial:- Providing and fixing of lighting cnductor finial, made of 25 mm dia 300mm long, copper tube having single prong at top, with 85mm dia 3mm thick G.I. base plate including holes etc. complete as required.

Reverting, sweating and soldering of copper/G.I. tape(with another coppr/G.I. tape, base of the finial or any other metallic object) as required.

P/F G.I. lightning conductor tape in horizontal run:- Providing and fixing GI tape 20mm x 3mmthick on parapet or surface of wall for lightning conductor complete as required(For horizontal run)

P/F G.I lightning conductor tape in vertical run:- Providing and fixing GI tape 20mm x 3mmthick on parapet or surface of wall for lightning conductor complete as required(for vertical run)

P/F Testing joint for G.I. lighting conductor:- Providing and fixing testing joint, made of 20mm x 3mm thick G.I. strip, 125mm long, with 4 nos.of G.I. bolts, nuts, chek nuts and spring washers etc complete as required.

Providing of 12'' (300 mm) Metal exhaust fan of make bajaj/havells/usha/crompton

Providing of 16'' (400 mm) Wall fan of make bajaj/havells/usha/crompton

Supplying and fixing of LED bulb 15/16 W of make bajaj/havells/crompton

SITC of following rating LED street lighting luminarie with pressure dia cast housingh and toughned glass cover ,IP 66 Protection , LUMINOUSEFFICARY >_110 LM/W with lens in existing pole /pipe for supply voltage 100-270V AC ,50 Hz, luminarie shall be confirm to IS 10322 part -5 /section -3 and shall be complete with all neccssary accessosries as required.

90 /100 W LED Street light of make bajaj/havells/crompton/C&S /Jaquar

S.I.T.C of following rating LED FLOOD lighting with pressure dia cast housing and toughened glass cover (IP 66 protection)in existing pole/pipe /platform/periferial wall for supply voltage 100-270v AC,50Hz Luminire shall be confirmto IS-10322 part-5/ section-3 and shall be complete with all neccssary accessories as required.of make bajaj/havells/crompton/C&S

200 W LED FLOOD LIGHT of make bajaj/havells/crompton/C&S /Jaquar

SITC of following rating recess/ surface mounted LED round /square shape down light luminire with pressure dia cast housing for single phase supply voltage, Luminarie shall be confirmto IS:10322 part - 5/section -2 or IEC : 62722 with all neccessary accessories as required.

18/20 W LED Round Down Light of make bajaj/havells/crompton/C&S /Jaquar

2'x2' LED Panel Light of make bajaj/havells/crompton/C&S /Jaquar

Approved make wall mounted decorative lamp with nicle/chorme with opel/round glass of lamp type E27/E22 LED 7/9 W x 2 IS:10322

S.I.T.C of following size ceiling fan 3 blades confirming to IS:374:2019 including wiring the down rods of standared length (upto 30cm) with 1.5 sq.mm FR PVC insuleted ,copper wire suitable for 230 V 50 Hz, single phase supply etc. complete as required.

1200 mm (48") Ceiling Fan of make bajaj/havells/usha/crompton/polar

PANEL REWIRING & ACCESSOSRIES

DIGITAL VOLT METER (0-500V) 3phase class 0.5

DIGITAL A METER (0-500Amp) 3phase class 0.5

COPPER WIRE 1.5MM

COPPER WIRE 16MM

COPPER WIRE 25MM

LED INDICATOR LAMP R/Y/B/G

C.T COIL OF CT ratio 500/5 IS2705 part -3

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed byEngineer-in-charge.

12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing

Electrical Work (Block -B)

Point wiring in PVC conduit, with piano type switch:-Wiring for light point/fan point/exhaust fan point/call bell point with 1.5. sq.mm FR PVC Insuleted copper conductor single core cable in recessed PVC conduit, with piano type switch, pheonlic lamineted sheet,suitable size PVC/G.I.box etc.

Group C

Twin control point wiring PVC conduit with piano type switch:-wiring for Twin control point with 1.5 sq mm FR PVC Insuleted copper conductor single core cable in recessed PVC conduit, 2 way piano, switch, pheonlic lamineted sheet,suitable size PVC/G.I.box etc.as required.

Circuit/submain wiring in PVC conduit:-Wiring for circuit/submain wiring along with earth wire with the following size PVC insuleted copper conductor single core cable in recessed PVC conduit as required

4x16 sq mm+2x6 sq mm earth wire

Point rewiring wiring in existing conduit,:-Rewiring for light point/fan point/exhaust fan point/caii bell point with.,5. sq.mm FR PVC Insuleted copper conductor single core cable in exiting PVC conduit, including dismentling as required.

Group C

Twin control point re-wiring in exiting conduit :-Rewiring for Twin control point with 1.5 sq mm FR PVC Insuleted copper conductor single core cable in exiting surface/recess steel/ PVC conduit, including dismentling.as required.

Wiring in exiting conduit:- Supplying and drawing following size of FR PVC insuleted copper conductor, single core cable in the exiting surface/recessed PVCconduit as required.

2x1.5 sq mm

3x2.5 sq mm

6x6 sq mm

Teliphone wiring existing conduit:- Supplying and drawing following pair 0.5 sq mmFR PVC insuleted copper conductor, unaramed teliphone cable in existing recessed PVC conduit as required

S/F PVC conduit :- supplying and fixing of following sizes PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case recessed conduit as required .

S/F PVC/G.I. boxes :- Supplying and fixing PVC/G.I. box of following sizes on surface or in recess with suitable size of phenolic laminated sheet cover infront including painting etc as required .

121mm x173mm x 48mm deep/(6" x 8")

126mm x 277mm x61mm deep/(6" x 12")

170mm x 221mm x 48 x deep/(8" x 10")

S/F Piano type switch /socket :- Supplying and fixing following piano type switch box/cover including connections etc . As required

5/6 amps, one way switch

15/16 amps, one way switch

3pin 5/6 amps, socket outlet

15/16 amp 6 pin socket outlet

15/16 amps 6 pin ss combined

Teliphone socket with shutter outlet

Electronic step fan reguletor, mini

S/F power plug point with piano type accessories:- Supplying and fixing suitable size G.I.box in recess whit phenolic lamineted sheet cover in front including providing and fixing 5 pin, 15/16 amps socket outlet and 15/16 amps piano type switch conection painting etc, as required.

S/F ceiling rose:- Supplying and fixing 2 pin 5 amp, ceiling rose on the existing junction box/wooden block including connection etc as required.

S/F Batten holder:- Supplying and fixing batten/angle holder including connection etc, as required.

Errection on incandescent light fitting:- Errection of wall bracket/ceiling fitting, complete with all accessories including connection etc as required.

S/F Dingdong Call bell :- Supplying and fixing dingdong call bell suitable for DC/AC single phase,230 volt, complete as required.

ITC fluorescent fitting directly on surface:- Instaliation, testing and commissioning of prewired, fluorescent fitting of all types, complete with all accessosries and tube etc. directly on ceiling /wall including connection with 1.5 sq mm.FR PVC insulated, copper conductor.

ITC ceiling fan:- Instaliation, testing and commissioning of ceiling fan including wiring the down rod of standard length( uptwo 30 cm) with 1.5 sq mm.FR PVC insulated copper conductor, single core cable etc as required

ITC exhaust fan up to 450 mm, sweep:- Installation of exhaust fan up to 450 mm. sweep in the exiting opening, including making the hole to suit the size of above fan, making good the damage, connection testing commissioning etc as required.

S/F MCCB in cubical panel board:- Providing and fixing following rating and capacity four pole MCCB in existing panel bord,including drilling holes in cubical panel making connections etc as required.

125 amps, 16 KA fixed thermal seting FOR FEEDER PANEL

160 amps, 35 KA fixed thermal seting FOR FEEDER PANEL

400 amps, 35 KA fixed thermal seting FOR FEEDER PANEL

800 amps, 35 KA fixed thermal seting FOR MAIN PANEL

S/F Busbar chamber :- Providing and fixing following capecity busbar chamber with 4 strips of suitable size of copper, heavy duty, complite with all accessosries including connections, earthing the body , etc as required.

400 amps FOR FEEDER PANEL

800 amps FOR MAIN PANEL

S/F, panel mounting changeover Providing and fixing following capiacity 4 pole panel mounting chengeover switches in existing cubical panel board,making connection, earthing the body etc as required.

630 amps, 4 pole FOR MAIN PANEL

S/F 'B' series. S.P.MCB:- Supplying and fixing 6 amps to 32 amps rating,240 volts, 'B' series miniature circuit breaker suitable for lighting and others loads of following poles in the exiting MCB DB complite with connections. Testing and commisioning etc as required.

6/32 amps,single pole, "B" SERIES

S/F 'C' series. S.P.MCB:- Supplying and fixing 6 amps to 32 amps rating,240 volts, 'C' series miniature circuit breaker suitable for lighting and others loads of following poles in the exiting MCB DB complite with connections. Testing and commisioning etc as required.

6/32 amps,single pole, "C" SERIES

40 amps,TPN

50/63 amps, TPN

G.I Earth pipe electrode with salt charcoal :- Earthing with G.I. earth pipe 4.5 mtr long,40mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required. with salt charcoal or coke. FOR LIGHTNING ARRESTOR

Copper Earth plate electrode:- Earthing with copper earth plate 600mmX600mmX3mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required.( with salt charcoal or coke) FOR MAIN PANEL AND FEEDER PANEL

S/L 8 SWG copper wire ground :- Supplying and laying 8 SWG copper wire 0.50 metre bellow ground level for conductor earth electrode, including soldring etc. as required.

P/F G.I. lightning conductor finial:- Providing and fixing of lighting cnductor finial, made of 25 mm dia 300mm long, copper tube having single prong at top, with 85mm dia 3mm thick G.I. base plate including holes etc. complete as required.

Reverting, sweating and soldering of copper/G.I. tape(with another coppr/G.I. tape, base of the finial or any other metallic object) as required.

P/F G.I. lightning conductor tape in horizontal run:- Providing and fixing GI tape 20mm x 3mmthick on parapet or surface of wall for lightning conductor complete as required(For horizontal run)

P/F G.I lightning conductor tape in vertical run:- Providing and fixing GI tape 20mm x 3mmthick on parapet or surface of wall for lightning conductor complete as required(for vertical run)

P/F Testing joint for G.I. lighting conductor:- Providing and fixing testing joint, made of 20mm x 3mm thick G.I. strip, 125mm long, with 4 nos.of G.I. bolts, nuts, chek nuts and spring washers etc complete as required.

Laying of one number PVC insuleted and PVC sheathed/ XLPE power cable of 11 KV grade of size not exceeding 35 sq.mm. direct in ground including excavetion, sand coushioning, protective covering and refilling the trench etc as required.

Supply of PVC XLPE insuletd PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts,(conforms to IS:7098, part-1)g

6 sq.mm. 4 core

Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required.

32 mm dia

Supplying and making end termination with brass commpression gland and aluminium lugs for following size of PVC insuleted and PVC sheathed /XLPE aluminium conductor cable of 1.1 KV grade as required.

4 X 10 sq. mm (25mm)

3½ X 300 sq. mm (70mm)

Providing of 12'' (300 mm) Metal exhaust fan of make bajaj/havells/usha/crompton

Providing of 16'' (400 mm) Wall fan of make bajaj/havells/usha/crompton

Supplying and fixing of LED bulb 15/16 W of make bajaj/havells/crompton

Supplying and fixing of cable junction box with RYBG Terminal plate and Din bar of make sintex /Hensel

Providing and fixing of 50 watt suspended type industrial COB highbay light with aluminium dia cast heat sink of make bajaj/havells/Philips/crompton

SITC of following rating LED street lighting luminarie with pressure dia cast housingh and toughned glass cover ,IP 66 Protection , LUMINOUSEFFICARY >_110 LM/W with lens in existing pole /pipe for supply voltage 100-270V AC ,50 Hz, luminarie shall be confirm to IS 10322 part -5 /section -3 and shall be complete with all neccssary accessosries as required.

90 /100 W LED Street light of make bajaj/havells/crompton/C&S /Jaquar

S.I.T.C of following rating LED FLOOD lighting with pressure dia cast housing and toughened glass cover (IP 66 protection)in existing pole/pipe /platform/periferial wall for supply voltage 100-270v AC,50Hz Luminire shall be confirmto IS-10322 part-5/ section-3 and shall be complete with all neccssary accessories as required.of make bajaj/havells/crompton/C&S

200 W LED FLOOD LIGHT of make bajaj/havells/crompton/C&S /Jaquar

SITC of following rating recess/ surface mounted LED round /square shape down light luminire with pressure dia cast housing for single phase supply voltage, Luminarie shall be confirmto IS:10322 part - 5/section -2 or IEC : 62722 with all neccessary accessories as required.

18/20 W LED Round Down Light of make bajaj/havells/crompton/C&S /Jaquar

2'x2' LED Panel Light of make bajaj/havells/crompton/C&S /Jaquar

Approved make wall mounted decorative lamp with nicle/chorme with opel/round glass of lamp type E27/E22 LED 7/9 W x 2 IS:10322

Supply of LED Commercial Lighting Power Factor ≥0.90 Built-in Surge protection 4 KV ingrease protection 20 System Wattage 40 Luminous flux 4000 lm Extruded aluminium housing fitted with Engg. Plastic end caps. Opal diffuser provides smooth light distribution LED populated on FR4 PCB comprising of LED’s connected in series parallel. With Driver Finish: Housing: White Suitable for surface mounting application size A 1886 mm, B 23 mm, H 37.5 mm of make BAJAJ(BCLAB 40W WH LED) Havells or equivalent

S.I.T.C of following size ceiling fan 3 blades confirming to IS:374:2019 including wiring the down rods of standared length (upto 30cm) with 1.5 sq.mm FR PVC insuleted ,copper wire suitable for 230 V 50 Hz, single phase supply etc. complete as required.

1200 mm (48") Ceiling Fan of make bajaj/havells/usha/crompton/polar

S.ITC of Following rating approved make LED Bollard fitting with Cylindrical shape of hight 600 to 850mm Power input - 8/9 watt with dia cast aluminium housing opel with PC diffuser IP:65/54 protection , conferming to IS:10322 part -5 etc all complete as required (excluding plinth charge) Of make bajaj/philips/polycab/jaquar

Constructing platform of 300 mm dia 600 mm long with 300 mm depth bellow ground and rest 300 mm exposed over ground to support Bamboo Bollard with all finishing plaster putty & paint all complite as per direction of E/I

PANEL REWIRING & ACCESSOSRIES

DIGITAL VOLT METER (0-500V) 3phase class 0.5

DIGITAL A METER (0-500Amp) 3phase class 0.5

COPPER WIRE 1.5MM

COPPER WIRE 16MM

COPPER WIRE 25MM

LED INDICATOR LAMP R/Y/B/G

C.T COIL OF CT ratio 500/5 IS2705 part -3

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed byEngineer-in-charge.

12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing

Electrical Work (Block -D)

Point wiring in PVC conduit, with piano type switch:-Wiring for light point/fan point/exhaust fan point/call bell point with 1.5. sq.mm FR PVC Insuleted copper conductor single core cable in recessed PVC conduit, with piano type switch, pheonlic lamineted sheet,suitable size PVC/G.I.box etc.

Group C

Twin control point wiring PVC conduit with piano type switch:-wiring for Twin control point with 1.5 sq mm FR PVC Insuleted copper conductor single core cable in recessed PVC conduit, 2 way piano, switch, pheonlic lamineted sheet,suitable size PVC/G.I.box etc.as required.

Circuit/submain wiring in PVC conduit:-Wiring for circuit/submain wiring along with earth wire with the following size PVC insuleted copper conductor single core cable in recessed PVC conduit as required

2x2.5 sq mm+1x2.5 sq mm earth wire

4x16 sq mm+2x6 sq mm earth wire

Point rewiring wiring in existing conduit,:-Rewiring for light point/fan point/exhaust fan point/caii bell point with.,5. sq.mm FR PVC Insuleted copper conductor single core cable in exiting PVC conduit, including dismentling as required.

Group C

Twin control point re-wiring in exiting conduit :-Rewiring for Twin control point with 1.5 sq mm FR PVC Insuleted copper conductor single core cable in exiting surface/recess steel/ PVC conduit, including dismentling.as required.

Wiring in exiting conduit:- Supplying and drawing following size of FR PVC insuleted copper conductor, single core cable in the exiting surface/recessed PVCconduit as required.

2x1.5 sq mm

3x2.5 sq mm

6x6 sq mm

Teliphone wiring existing conduit:- Supplying and drawing following pair 0.5 sq mmFR PVC insuleted copper conductor, unaramed teliphone cable in existing recessed PVC conduit as required

S/F PVC conduit :- supplying and fixing of following sizes PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case recessed conduit as required .

S/F PVC/G.I. boxes :- Supplying and fixing PVC/G.I. box of following sizes on surface or in recess with suitable size of phenolic laminated sheet cover infront including painting etc as required .

121mm x173mm x 48mm deep/(6" x 8")

126mm x 277mm x61mm deep/(6" x 12")

170mm x 221mm x 48 x deep/(8" x 10")

S/F Piano type switch /socket :- Supplying and fixing following piano type switch box/cover including connections etc . As required

5/6 amps, one way switch

15/16 amps, one way switch

3pin 5/6 amps, socket outlet

15/16 amp 6 pin socket outlet

15/16 amps 6 pin ss combined

Teliphone socket with shutter outlet

Electronic step fan reguletor, mini

S/F power plug point with piano type accessories:- Supplying and fixing suitable size G.I.box in recess whit phenolic lamineted sheet cover in front including providing and fixing 5 pin, 15/16 amps socket outlet and 15/16 amps piano type switch conection painting etc, as required.

S/F ceiling rose:- Supplying and fixing 2 pin 5 amp, ceiling rose on the existing junction box/wooden block including connection etc as required.

S/F Batten holder:- Supplying and fixing batten/angle holder including connection etc, as required.

Errection on incandescent light fitting:- Errection of wall bracket/ceiling fitting, complete with all accessories including connection etc as required.

S/F Dingdong Call bell :- Supplying and fixing dingdong call bell suitable for DC/AC single phase,230 volt, complete as required.

ITC fluorescent fitting directly on surface:- Instaliation, testing and commissioning of prewired, fluorescent fitting of all types, complete with all accessosries and tube etc. directly on ceiling /wall including connection with 1.5 sq mm.FR PVC insulated, copper conductor.

ITC ceiling fan:- Instaliation, testing and commissioning of ceiling fan including wiring the down rod of standard length( uptwo 30 cm) with 1.5 sq mm.FR PVC insulated copper conductor, single core cable etc as required

ITC exhaust fan up to 450 mm, sweep:- Installation of exhaust fan up to 450 mm. sweep in the exiting opening, including making the hole to suit the size of above fan, making good the damage, connection testing commissioning etc as required.

S/F MCCB in cubical panel board:- Providing and fixing following rating and capacity four pole MCCB in existing panel bord,including drilling holes in cubical panel making connections etc as required.

125 amps, 16 KA fixed thermal seting FOR FEEDER PANEL

160 amps, 35 KA fixed thermal seting FOR FEEDER PANEL

630 amps, 35 KA fixed thermal seting FOR FEEDER PANEL

S/F Busbar chamber :- Providing and fixing following capecity busbar chamber with 4 strips of suitable size of copper, heavy duty, complite with all accessosries including connections, earthing the body , etc as required.

100 amps FOR AC OUT PUT

S/F, panel mounting changeover Providing and fixing following capiacity 4 pole panel mounting chengeover switches in existing cubical panel board,making connection, earthing the body etc as required.

630 amps, 4 pole FOR MAIN PANEL

S/F T.P.MCB DB:- Supplying and fixing following way three pole and nutral,sheet,MCB distribution board,415 volt,in recess,complete with tinned copper busbar,earth bar, din bar, detachable gland plate, interconnections, phosphatized and power painted including earthing etc. as required.(But without MCB/RCCB/ISOLATOR)

8 way (4+24),Double door, Horizontal type

S/F VERTICAL TYPE T.P.MCB DB:- Supplying and fixing following way three pole and nutral,sheet,MCB distribution board,415 volt,in recess,complete with tinned copper busbar,earth bar, din bar, detachable gland plate, interconnections, phosphatized and power painted including earthing etc. as required.(But without MCB/RCCB/ISOLATOR) Note:- Vertical type MCB TPDB is normally used where three phase outlets are required.

12 way (4+36),Double door, Vertical type

S/F 'B' series. S.P.MCB:- Supplying and fixing 6 amps to 32 amps rating,240 volts, 'B' series miniature circuit breaker suitable for lighting and others loads of following poles in the exiting MCB DB complite with connections. Testing and commisioning etc as required.

6/32 amps,single pole, "B" SERIES

S/F 'C' series. S.P.MCB:- Supplying and fixing 6 amps to 32 amps rating,240 volts, 'C' series miniature circuit breaker suitable for lighting and others loads of following poles in the exiting MCB DB complite with connections. Testing and commisioning etc as required.

6/32 amps,single pole, "C" SERIES

40 amps,TPN

50/63 amps, TPN

G.I Earth pipe electrode with salt charcoal :- Earthing with G.I. earth pipe 4.5 mtr long,40mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required. with salt charcoal or coke. FOR LIGHTNING ARRESTOR

Copper Earth plate electrode:- Earthing with copper earth plate 600mmX600mmX3mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required.( with salt charcoal or coke) FOR MAIN PANEL AND FEEDER PANEL

S/L 8 SWG copper wire ground :- Supplying and laying 8 SWG copper wire 0.50 metre bellow ground level for conductor earth electrode, including soldring etc. as required.

P/F G.I. lightning conductor finial:- Providing and fixing of lighting cnductor finial, made of 25 mm dia 300mm long, copper tube having single prong at top, with 85mm dia 3mm thick G.I. base plate including holes etc. complete as required.

Reverting, sweating and soldering of copper/G.I. tape(with another coppr/G.I. tape, base of the finial or any other metallic object) as required.

P/F G.I. lightning conductor tape in horizontal run:- Providing and fixing GI tape 20mm x 3mmthick on parapet or surface of wall for lightning conductor complete as required(For horizontal run)

P/F G.I lightning conductor tape in vertical run:- Providing and fixing GI tape 20mm x 3mmthick on parapet or surface of wall for lightning conductor complete as required(for vertical run)

P/F Testing joint for G.I. lighting conductor:- Providing and fixing testing joint, made of 20mm x 3mm thick G.I. strip, 125mm long, with 4 nos.of G.I. bolts, nuts, chek nuts and spring washers etc complete as required.

Supply of PVC XLPE insuletd PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts,(conforms to IS:7098, part-1)g

50 sq.mm. 3.5 core

300 sq.mm. 3.5 core

Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required.

32 mm dia

Supplying and making end termination with brass commpression gland and aluminium lugs for following size of PVC insuleted and PVC sheathed /XLPE aluminium conductor cable of 1.1 KV grade as required.

3½ X 50 sq. mm (35mm)

3½ X 300 sq. mm (70mm)

Supplying and making straight through joint with cast resin compound including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required

3½ X 50 sq. mm

Providing of 12'' (300 mm) Metal exhaust fan of make bajaj/havells/usha/crompton

Providing of 16'' (400 mm) Wall fan of make bajaj/havells/usha/crompton

Supplying and fixing of LED bulb 15/16 W of make bajaj/havells/crompton

Supplying and fixing of cable junction box with RYBG Terminal plate and Din bar of make sintex /Hensel

Providing and fixing of 50 watt suspended type industrial COB highbay light with aluminium dia cast heat sink of make bajaj/havells/Philips/crompton

SITC of following rating LED street lighting luminarie with pressure dia cast housingh and toughned glass cover ,IP 66 Protection , LUMINOUSEFFICARY >_110 LM/W with lens in existing pole /pipe for supply voltage 100-270V AC ,50 Hz, luminarie shall be confirm to IS 10322 part -5 /section -3 and shall be complete with all neccssary accessosries as required.

90 /100 W LED Street light of make bajaj/havells/crompton/C&S /Jaquar

S.I.T.C of following rating LED FLOOD lighting with pressure dia cast housing and toughened glass cover (IP 66 protection)in existing pole/pipe /platform/periferial wall for supply voltage 100-270v AC,50Hz Luminire shall be confirmto IS-10322 part-5/ section-3 and shall be complete with all neccssary accessories as required.of make bajaj/havells/crompton/C&S

200 W LED FLOOD LIGHT of make bajaj/havells/crompton/C&S /Jaquar

SITC of following rating recess/ surface mounted LED round /square shape down light luminire with pressure dia cast housing for single phase supply voltage, Luminarie shall be confirmto IS:10322 part - 5/section -2 or IEC : 62722 with all neccessary accessories as required.

18/20 W LED Round Down Light of make bajaj/havells/crompton/C&S /Jaquar

2'x2' LED Panel Light of make bajaj/havells/crompton/C&S /Jaquar

Approved make wall mounted decorative lamp with nicle/chorme with opel/round glass of lamp type E27/E22 LED 7/9 W x 2 IS:10322

S/F of wall hanging dia cast aluminium body tempered glass diffuser IP 65 protection, dia cast aluminium housung MATT GREY FINISH (WARM WHITE) 2X5 WATT LED UP and DOWN lighter OF MAKE -PHILIPS / BAJAJ/ HAVELLS

Supply of LED Commercial Lighting Power Factor ≥0.90 Built-in Surge protection 4 KV ingrease protection 20 System Wattage 40 Luminous flux 4000 lm Extruded aluminium housing fitted with Engg. Plastic end caps. Opal diffuser provides smooth light distribution LED populated on FR4 PCB comprising of LED’s connected in series parallel. With Driver Finish: Housing: White Suitable for surface mounting application size A 1886 mm, B 23 mm, H 37.5 mm of make BAJAJ(BCLAB 40W WH LED) Havells or equivalent

S.I.T.C of following size ceiling fan 3 blades confirming to IS:374:2019 including wiring the down rods of standared length (upto 30cm) with 1.5 sq.mm FR PVC insuleted ,copper wire suitable for 230 V 50 Hz, single phase supply etc. complete as required.

1200 mm (48") Ceiling Fan of make bajaj/havells/usha/crompton/polar

PANEL REWIRING & ACCESSOSRIES

DIGITAL VOLT METER (0-500V) 3phase class 0.5

DIGITAL A METER (0-500Amp) 3phase class 0.5

COPPER WIRE 1.5MM

COPPER WIRE 16MM

COPPER WIRE 25MM

LED INDICATOR LAMP R/Y/B/G

C.T COIL OF CT ratio 500/5 IS2705 part -3

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at Code Description Unit Rate No SUB HEAD : 12.0 ROOFING 215 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I.wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:

12.5 mm thick tapered edge gypsum moisture resistant board FOR Foyer and hall passage

Providing fixing Thermal Insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS : 8183, density 48kg / m3, 50mm thick, wrapped in 200 G Virgin Polythene bags, fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling of building.

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7) in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm ) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised @80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’.

The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. (Approved Brand - Armstrong/ Saint Gobain).

With 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.7), (Approved Brand - Armstrong/ Saint Gobain)

Providing and Fixing Channeled Woodworks perforated panels of width 128mm, thickness of 16mm and length 2440 mm or as required by the Architect/ approving engineer, made of a high density particle board substrate with a laminated facing as per the approved shade/ species & finish and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the visible surface has a (“Helmholtz” fluted perforation of 2mm width and 14mm of visible panel / 4mm width and 28mm visible panel) each. The panels shall provide a minimum sag resistance of RH90 and a fire rating class of 1 as per Part 7 of BS 476. The edges of the panels shall be “tongue-and-grooved” to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece. The panels shall be mounted on special aluminium splines using clips provided by Armstrong and approved by the Architect/ Engineer-in-Charge.

INSTALLATION: Install wooden battens (provided by others) of section 50mmx50mm or as approved by the Architect on the solid wall horizontally using screws and plugs at spacing of 600mm centre-to-centre. Screw the aluminium extruded keel for channelled woodworks (GTPT001) provided by Armstrong over the lowest and second wooden batten at an on-center distance of 600mm. Install the first set of wooden panels by inserting the clips for border channelled woodworks (GTPT002) and insert the groove of the panel into the projecting flange of the aluminium clip. Continue installing rows of panels by inserting the tongue into the groove of the earlier inserted panel and progressively installing clips for inside channelled woodworks (GTPT003) into the next keel till the actual height is achieved. Use clips for border channelled woodworks (GTPT002) to finish off the installation. Finish off the edges using wooden moulding of matching colour (provided by others). Approved Brand - Armstrong/ Anutone)LENGTH OF WALL = 356

Providing supplying and installing Armstrong "Optra Acoustical Wall Panelling" with square edge made of fibre glass subtrate 25mm thick and wrapped on the front side with an acoustically transparent and fire resistant fabric with an option of colours as per the choice of the Architect of size 2100x600 or 600x600mm providing a minimum sound absorption level of 0.90 NRC to be affixed to wall using wall panel impalers including fixing of panel to the wall surface by self taping screws. Silica based construction adhessive shall be dabbed on to the prjecting elements (spikes) of the impalers and panels shall be pierced through the spikes with maintaining the line and level of panel Approved Brand - Armstrong/ Anutone)

Two Loop Panel.

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.

Circuit/submain wiring in PVC conduit:-Wiring for circuit/submain wiring along with earth wire with the following size PVC insuleted copper conductor single core cable in recessed PVC conduit as required

2x1.5 sq mm+1x1.5 sq mm earth wire

Ductable Ac Units (Corridoor-Area)

Installation, testing and commissioning of 17.0 TR Ductable type air conditioining unit.with Scroll Compressor

Installation, testing and commissioning of 11.0 TR Ductable type air conditioining unit.with Scroll Compressor

Installation, testing and commissioning of 5.5 TR Ductable type air conditioining unit.with Scroll Compressor

Installation, testing and commissioning of 5.5 TR Fan Coil type air conditioining unit.

Ductable Ac Units (Back stage -Area)

Installation, testing and commissioning of 5.5 TR Ductable type air conditioining unit.with Scroll Compressor

Installation, testing and commissioning of 2.0 TR High Wall type air conditioining unit.

Ductable Ac Units (Cafeteria -Area)

Installation, testing and commissioning of 7.5 TR Fan Coil type air conditioining units

Installation, testing and commissioning of 5.0 TR Fan Coil type air conditioining unit.

Installation, testing and commissioning of 3.0 TR Tower Ac type air conditioining unit.

Installation, testing and commissioning of 2.0 TR Hi-Wall type air conditioining unit.

Refrigrent piping with Nitral form insulation

17.0 TR Hard Copper pipe with Insulation

11.0 TR Hard Copper pipe with Insulation

7.5 TR Hard Copper pipe with Insulation

5.5 TR Hard Copper pipe with Insulation

5.0 TR Hard Copper pipe with Insulation

3.0 TR Soft Copper pipe with Insulation

2.0 TR Soft Copper pipe with Insulation

Electrical Cabling between condenser & Evaporators

17.0 TR with Rapping

11.0 TR with Rapping

7.5 TR with Rapping

5.5 TR with Rapping

5.0 TR with Rapping

3.0 TR with Rapping

2.0 TR with Rapping

supply fabrication and istallation MS Base frame (plateform duty painted for outdoor units.

17.0 TR DUCTED

11.0 TR DUCTED

7.5 TR DUCTED

5.5 TR DUCTED

5.0 TR DUCTED

3.0 TR DUCTED

Drain Pipe

Supply, Installation testing &Commissing of follwing size installation PVC Drain pipe

Gas Charging Refling (R-407- 410A , R22)

17.0 TR Ducted

11.0 TR Ducted

7.5 TR Ducted

5.5 TR Ducted

5.0 TR Fan Coil Ac

3.0 TR Tower Ac

2.0 TR HI-Wall Ac

Nitrogen Flassing

17.0 TR Ducted

11.0 TR Ducted

7.5 TR Ducted

5.5 TR Ducted

5.0 TR Fan Coil Ac

3.0 TR Tower Ac

2.0 TR HI-Wall Ac

G.I Sheet Metal ducting (Rectangular) RE-WORK ONLY

Thickness 0.80 mm sheet (24G)

Thickness 0.63mm sheet (22G to 20 G )

Duct Thermal Insulation (K-FLEX)

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (Class"0") insulation on existing duct after applyingtwo coatsof cold setting adhesive (CPRX) COMPOUND) The joint shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile ruber tape insulation complete as per specification and as requred

19 mm thick (AC) Ducting)

Accoustic insulation

Providing and fixing of Duct acoustic lining with 9mm thick Rigid board insulation, covered with perforated Aluminium 26 Ga, sheet, nuts, bolts etc. complete with all accessory as required.

Continue Grilles 8"

Supply, Installation and Testing of Supply Air Grilles with Alluminium coated and Demper

Supply, Installation and Testing of Return Air Grilles with Alluminium coated and Demper

Square Diffuser (12")

Supply, Installation and Testing of Supply Air Grilles with Alluminium coated and Demper

Supply, Installation and Testing of Return Air Grilles with Alluminium coated and Demper

Volume Control Demper in Duct

Ventilation System

Fresh Air cowl with bird screen

G.I CABLE TRAY

Supply and erection of hot dip G.I. cable tray perforation not more than 17.5% for specific dimensions along with tees, bends. The cable tray shall be hang from ceiling/ fixed to wall with necessary angle/flat iron / hanging rod, for ceiling suspensions, clamps, anchor fastner, nuts, bolts, washers, not mor than 1.5 mtr. apart complete as per specification to complete the job. The tray shall be as follows :-

100 x 50 mm x 1.6mm thick

150 x 50 mm x 1.6mm thick

All Machine Lifting And Shifting

Rabber Pad For All Outdoor Units

Brazzing Road for IDU and Odu Connection

Remote Wired connection for indoor units

Compressor changes for Ducted Ac (5.0 TR)

Compressor changes for 17.0 Ac ducted

11.0 Tr PCB Changes

Reparing for fan Coil units

wooden work for Grills framing

Reparing Contractors for outdoor units Ac

Evaporators Defected for 11.0 tr Ducted Ac with Capacitors

Defected for OUTDOOR UNITS Motors (11.0 TR to 17.0 Tr )

SITC of 150W High Quality LED Parcan Light complete with, Lamp source 3200K CCT Colour temperature CRI & TLCI Values above 95 COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) DmX 512 dimming with 3 channel control Beam Angle of 9˚ / 25˚ / 45˚ Total Power Consumption of 165W High quality output replacing 1000W Halogen Par Flicker Free 100% for Tv & Film Cameras 11.7KHz Refresh Rate, Linear Dimming 0 ~ 100% Fuse and Internal safety protections Strobe option Adjustable 1~25 times/Sec Variable Fixture provided with Yoke of Manual Adjustment 5 Pin XLR for DmX , Black powder coated body. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Acrediated laboratory. Brand embosed impact on the light body for genuine product Approved Make: Aultra / Markrich / Leksa / Martin

SITC of 300W LED Profile Spot 19 Degree Light complete with, 3200K CCT Colour Temperature COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) CRI & TLCI above 95, Strobe option Adjustable 1 ~ 25 times / Sec 4 Kinds of dimming curves, Black finish housing, Manual Focus with 4 Beam shaping cutters Efficient and well-designed Lamp reflector Efficient Copper tube based Heat Sink for Heat Dissipation Sleek and Unique Designed Light weight body Fixture provided with Yoke of Manual Adjustment DmX 512 dimming with 1 or 3 Channel modes IP20 protection having Lux @ 3 Mtrs above 12040 suitable to illuminate the key presentor or talent on stage. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 . CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Acrediated laboratory. Brand embosed impact on the light body for genuine product Approved Make: Aultra / Markrich / Leksa / Martin

SITC of 54 x 3W LED Par Light RGBW, Beam Angle 25° complete with LED source from Lumiled / Seoul / Nichia or reputed make (LM80 to be provided) ,RGBW 3W Lamp source x 54 Pcs ,DmX 512 dimming with 8 Channel High Bright Red, Green, Blue, White LED’s Source Unlimited Color Mixing through DmX 0 ~ 100% Linear dimming , In built presets for different colors Strobe Mode 20 times/Sec Data DmX through 3 / 5 Pin XLR’s 65dB ~ 130dB Sound sensing capacity "Power In and Out Connections High precision colors, IP20 protection Powder coated Black finish housing Having Sound Control & Master Slave Auto Run Mode Illuminate the Indoor stage with unlimited colour effects Rigidly built pressure die-casted Aluminium body. RDM Control options with latest technology (RDM ID to be specified), Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Acrediated laboratory. Brand embosed impact on the light body for genuine product" Approved Make: Aultra / Markrich / Leksa / Martin

SITC of 54x3W LED 3200K Par Light Beam Angle 25° complete with 3200K 3W Lamp source x 54 Pcs LED source from Lumiled / Seoul / Nichia or reputed make (LM80 to be provided) Having CRI TLCI Values above 95 Flicker Free for high FPS Smooth fade in and Fade out High precision steady color No heat, DmX 512 dimming with 2 Channel 0 ~ 100%, Powder coated Black finish housing Rigidly built pressure die-casted Aluminium body LED Easy view display Data DmX through 3 / 5 Pin XLR’s 65dB ~ 130dB Sound sensing capacity Power In and Out Connections Total Power Consumption of 180W Sound Active Mode Control IP20 protection. "RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Acrediated laboratory. Brand embosed impact on the light body for genuine product" Approved Make: Aultra / Markrich / Leksa / Martin

SITC of 180W LED CCT tuneable Light complete with CCT Tuneable Lamp source LED source from Lumiled / Seoul / Nichia or reputed make (LM80 to be provided) , Having CRI TLCI Values above 95 High precision steady color No heat, DmX 512 dimming with 2 Channel Beam Angle 15°/ 25° / 45° 0 ~ 100% Smooth dimming, Powder coated Black finish housing Rigidly built pressure die-casted Aluminium body LED Easy view display, Flicker Free for high FPS Smooth fade in and Fade out Data DmX through 5 Pin XLR’s Total Power Consumption of 180W Sound Active Mode ControlIP20 protection. 65dB ~ 130dB Sound sensing capacity Power In and Out Connections RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Acrediated laboratory. Brand embosed impact on the light body for genuine product Approved Make: Aultra / Markrich / Leksa / Martin

SITC of 400W LED Blinder Light 30 Degree complete with 3200K CCT 4x100W Chip On Board LED Lamp source COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) DmX 512 dimming with 4 /8 Channel modes CRI & TLCI Value > 90 , Strobe option Adjustable 1 ~ 25 times / Sec Variable, Beam Angle 30 Degree Total Power Consumption of 420W 11.7KHz Refresh Rate, In built preset’s for effects Fuse and Internal safety protections, Active Cooling with Low Noise Fan, 5 Pin XLR for DmX, High quality well designed inbuilt reflector, Flicker Free 100% for Tv & Film Cameras, Black finish housing, IP20 protection, Having Strobe option and smooth dimming,illuminate Stage with uniform light intensity levels. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Acrediated laboratory. Approved Make: Aultra / Markrich / Leksa / Martin

SITC of 200W LED Fresnel Light having COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) 3200K colour temperature High quality uniquely designed Fresnel Lens CRI,TLCI and R9 value above 96 LED COB Based Source No Multiple Shadows – Single Source illumination Total Power Consumption of 220W Linear dimming 0 ~ 100% Adjustment Flicker Free for High FPS, Power AC90-260V, 50/60HZ Working Temperature - +40° ~ -30° Active Cooling with Low Noise Fan " DmX & RDM Control options with latest technology Fixture provided with Yoke of Manual Adjustment Manual and DMX control Option mode through 5pin xlr Black powder coated fabricated housing with normal yoke. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Acrediated laboratory. Brand embosed impact on the light body for genuine product" Approved Make: Aultra / Markrich / Leksa / Martin

SITC of Light fixture mouting clamp Customized for suspending on fixed bars on stage Made up of Aluminium Die casted MS threaded T bolt with yellow passivation finish Complete with black powder coating matt black finish. Safe working load 150 KG Suitable to Batten of size 30 OD to 60 OD. Approved Make: Aultra / Markrich / Leksa / Martin

SITC of Light Fixture dual safety, Chain made up of GI wire rope Bundled and twisted together Having load bearing capacity above 200 Kgs Sleve on the rope. Carabiner Clip. Approved Make: Aultra / Markrich / Leksa / Martin

SITC of Suspender cum clamps designed made out of MS material 150mm x 150mm x 5mm MS Base plate Threaded rod, Black powder coated finish All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Suitable to hold various type grid & other rigging systems. Approved Make: Aultra / Markrich / Leksa / Martin

SITC of Fixed stage side Ladder as per the design, With an Mild Steel 40NB 48 OD black matt finish. It should hang from the roof with MS anglewhich is suspended from the fish plate of 5mm. Size of 600mm x 2400mm, Manual movable Made out of 40NB 48 OD Mild steel pipe dual barrel Dual Barrel Arrangement Powder coated with Matt black Texture Single Construction with Cross connecting pipes Cross connecting Pipes at every 600mm Ladder can be moved along the track or adjusted as required, Spud & Trolley, Pivoted or Fixed Suspenders as per site conditions Round pipe welded to create square frame Heavy duty trolly to hold and rotate wing frame Material for the light bar shall be of Mild Steel Pipe. Powder coated with Matt black Texture Fixing Through Suspenders as per site conditions Ladder Length shall be of customized type as per site condition. Approved Make: Aultra / Markrich / Leksa / Martin

SITC of Motorised integrated fly bar/winch of 8 Mtr length Motorized Light bar, The winch shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y,Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG: 62052Z,IP:55, AMB:50 degree. It shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5,Single Reduction 7.5:1 to 100:1 and the size shall be 90.It shall have an drive unit base frame to fix the gear box which contains one shaft.This mechanisam shall have drum plate of 300mm x 5mm thickness with 6 groves where the GI wire rope of 5mm can be winded up when the hoist moves up and down. 415VAC Motor with Brake for Motor System to lift a load of 180Kg as a safe working load which should be synchronized with Control Panel. Wifi operated wireless smart working functianailty Dual barrel duly powder coated Made using 40NB dual construction.Matt black texture finish paint to keep them rust free. Powder coated 60 microns black matt finish with proper chemical treatment and methodogy. Wifi based up down lightbar movement Specially designed compact gear box 3phase AC motor with DC Brake 1.5HP. Provided with Necessary pulley, guide pulleys, GI wire rope with winding drum. Compact gear box along with suitable capacity of motor unit. Upper and lower limit controller, Safe working load of 200Kg. Cable management system. Approved Make: Aultra / Markrich / Leksa / Martin

SITC of Motorised integrated FOH fly bar/winch of 10 Mtr length Motorized Light bar, The winch shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y,Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG: 62052Z,IP:55, AMB:50 degree. It shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5,Single Reduction 7.5:1 to 100:1 and the size shall be 90.It shall have an drive unit base frame to fix the gear box which contains one shaft.This mechanisam shall have drum plate of 300mm x 5mm thickness with 6 groves where the GI wire rope of 5mm can be winded up when the hoist moves up and down. 415VAC Motor with Brake for Motor System to lift a load of 180Kg as a safe working load which should be synchronized with Control Panel. Wifi operated wireless smart working functianailty Dual barrel duly powder coated Made using 40NB dual construction.Matt black texture finish paint to keep them rust free. Powder coated 60 microns black matt finish with proper chemical treatment and methodogy. Wifi based up down lightbar movement Specially designed compact gear box 3phase AC motor with DC Brake 1.5HP. Provided with Necessary pulley, guide pulleys, GI wire rope with winding drum. Compact gear box along with suitable capacity of motor unit. Upper and lower limit controller, Safe working load of 200Kg. Cable management system.Approved Make: Aultra / Markrich / Leksa / Martin

SITC of Power Distribution Electrical panel having a Incomer of 100 A. Floor mount / rack mount / wall mount. Miniature circuit brakers of single poles shall be fixed of different ratings from 6/10/16/25A as per the lighting fixtures.Wiring inside the module for power, control protection and instrument etc. shall be done with use of 1100 V confirming to IS 694 and IS 8130ement.All welding slag grounded off and welding pits wiped smooth with plumber metal.Power panels shall be designed in such a way that the internal space is sufficient for hot air movement, and the electrical component does not attain temperature more than 40 degree Celsius.Fabricated panel shall be supported with ms angles of size 25mm x 25mm with an 1.8mm thickness sheet to hold the structure. Nuetral separation made using incomer of L&T or Schneider make, Voltmeter, Ammeter display for reading visualization Individual MCB control for 29 outgoing circuits RYB Phase indicators internally wired using IS certified wires and cables Terminal for both incoming and outgoing cable shall be suitable for 1100 volts grade, aluminum/copper conductor PVC insulated and sheathed, armoured cable and shall be suitable for connections. Provided with ivery connectors for the internal terminations and external outgoing connecting pointsCustom built as per specification and project required. Approved Make: Aultra / Markrich / Leksa / Martin

SITC of High quality power junction box 4 way made up of MS Sheet metal fabricated housing. Snap fit fixing /15 (1.5mm ) Total Max Rating 10A, 250V A.C 20˚C to +70˚C Operating Temp Moldings: Nylon, Flammability Rating UL94V-0 Black powder coated, fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. Clamp arrangement for fixing or Raul plug arrangement for wall / floor fixing. Approved Make: Aultra / Markrich / Leksa / Martin

SITC of High quality power junction box 2 way made up of MS Sheet metal fabricated housing. Snap fit fixing /15 (1.5mm ), Total Max Rating 10A, 250V A.C 20˚C to +70˚C Operating Temp Moldings: Nylon, Flammability Rating UL94V-0 Black powder coated, fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. Clamp arrangement for fixing or Raul plug arrangement for wall/floor fixing. Approved Make: Aultra / Markrich / Leksa / Martin

SITC of High quality Dimming In junction box 1 way made up of MS Sheet metal fabricated housing High temperature resistant insulator material All metal housing offers best overall RF protection & electromagnetic shielding Black powder coated, fibre glands of suitable size fitted with 5 Pin DmX XLR Male socket Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing. Approved Make: Aultra / Markrich / Leksa / Martin

SITC of High quality Dimming Out junction box 1 way made up of MS Sheet metal fabricated housing High temperature resistant insulator material All metal housing offers best overall RF protection & electromagnetic shielding Black powder coated, fibre glands of suitable size fitted with 5 Pin DmX XLR Female socket Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing. Approved Make: Aultra / Markrich / Leksa / Martin

SITC of DmX Loop Junction Box having 1 No. of DmX 5 Pin XLR Female Socket & 1 No. DmX XLR Male Socket fitted on to a sheet metal fabricated compact Junction box powder coated with matt black texture finish paint. High temperature resistant insulator material All metal housing offers best overall RF protection & electromagnetic shielding. Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing. Approved Make: Aultra / Markrich / Leksa / Martin

SITC of Internal Earthing System with copper bare conductors all along the cable trays, metal parts and Installation Hardwares

SITC of Black Powder coated cable trays made out of MS Sheet fabricated for a size of 40 x 150 x 40mm & 1.6 mm thickness undergone through 7 tank process with various chemical treatment to keep them rust free with perforation for heat dessipation provided with lid.

SITC of Black Powder coated cable trays made out of MS Sheet fabricated for a size of 40 x 75 x 40mm & 1.6 mm thickness undergone through 7 tank process with various chemical treatment to keep them rust free with perforation for heat dessipation provided with lid.

SITC of DmX Male Female Connectors 5 Pin having rubber sheeth protection for Cross connecting DmX wiring connections

SITC of DmX Male Termination Connector 5 Pin soldered with required capacity of resistor for signal deframing

DmX Touch Screen based controller having 7” Multi touch screen option 2 DmX Outlets 5 Pin XLR’s, 512 Channels each, Optically isolated outputs, 4 Smooth Encoders for control operation of attributes, Backlit keys, 12 Fader Stacks, 600+ Playbacks, 350+ Group saving, 350+ Presets, User defined shape effects, Macro saving options, External Midi timecode options, Internal clock, Shortcut user interfaces, Master fader, Blackout Key under Master fader, Numerical keypad for the light command entry inbuilt embedded within controller, USB interface, Scene saving options, Show saves and load save features, custom built user interface library for fixture files. Approved Make: Aultra / Markrich / Leksa / Martin

SITC of C Profile MS Hot rolled strips 3mm thick with Added U bend used either to create basic supports Customized 40 x 50mmm, All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Makes easier to suspend all the stage machineryDuly powder coated Matt black texture finish paint. Approved Make: Aultra / Markrich / Leksa / Martin

SITC of 29-way Power Marhalling Box made up of MS Sheet metal fabricated housing black powder coated and ivery connectors for the internal terminations and external outgoing connecting points, fibre / brass glands of suitable size. Approved Make: Aultra / Markrich / Leksa / Martin

SITC of Auxilary Marshalling Box, made up of MS Sheet metal fabricated housing black powder coated and ivery connectors for the internal terminations and external outgoing connecting points, fibre glands of suitable size. Approved Make: Aultra / Markrich / Leksa / Martin

SITC of Flat Cable Wire harness required to provide the input power to the sockets on the hoists connecting between grid level circuit box to on hoist circuit box with below specifications: FRLS Multi core Copper cable 18 Cores of Power each with 2.5 Sq. mm copper wires insulated with high insulated material 2 DmX 5 core cableswith low noise Width of the flat cable 120mm approx. Clips at each bending of the cable to act as retractor unit Long life, no breakage, smooth folding

SITC of Cable Connecting Circuit Boxes for the termination of cables from Electrical panel to the grid level point made out of MS Sheet metal fabricated housing duly powder coated with matt black texture finish paint, fitted with required channels and ivery connectors, necessary glands etc. Approved Make: Aultra / Markrich / Leksa / Martin

SITC of FRLS Copper unarmoured Flexible cable IS694 having 3 Core each of 1.5 Sq mm size.

SITC of FRLS Copper unarmoured Flexible cable IS694 having 7 Core each of 1.5 Sq mm size.

SITC of FRLS Copper unarmoured Flexible cable IS694 having 4 Core each of 4 Sq mm size.

SITC of FRLS Copper unarmoured Flexible cable IS694 having 12 Core each of 1.5 Sq mm size.

SITC of 5 Core DmX Cable with Sheathed housing on the cable, well designed insulation, low noise suitable to transmet DmX signal.

SITC of Suspender cum clamps designed made out of MS material 150mm x 150mm x 5mm MS Base plate Threaded rod, Black powder coated finish All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Suitable to hold various type grid & other rigging systems. Approved Make: Aultra / Markrich / Leksa / Martin

SITC of C Profile MS Hot rolled strips 3mm thick with Extra U bend used either to create basic supports Customized 40 x 50mmm, All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Makes easier to suspend all the stage machinery Duly powder coated Matt black texture finish paint Approved Make: Aultra / Markrich / Leksa / Martin

SITC of Cable Connecting Circuit Boxes for the termination of cables from Electrical panel to the grid level point made out of MS Sheet metal fabricated housing duly powder coated with matt black texture finish paint, fitted with required channels and ivery connectors, necessary glands etc. Approved Make: Aultra / Markrich / Leksa / Martin

SITC of FRLS Copper unarmoured Flexible cable IS694 having 7 Core each of 1.5 Sq mm size.

SITC of FRLS Copper unarmoured Flexible cable IS694 having 4 Core each of 4 Sq mm size.

SITC of High quality Velvet fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Main Curtain) Size: 14 Mtr x 7 Mtr. Approved Make: Aultra / Markrich / Leksa / Martin

SITC of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Rear Curtain) Size: 12 Mtr x 7 Mtr. Approved Make: Aultra / Markrich / Leksa / Martin

SITC of High quality Velvet fabric fire retardant treated as per approved colour and make with a gathering of 100% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Main Valance) Size: 13 Mtr x 1.5 Mtr. Approved Make: Aultra / Markrich / Leksa / Martin

SITC of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Frills) Size: 9Mtr x 1.2Mtr. Approved Make: Aultra / Markrich / Leksa / Martin

SITC of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 0% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing. (For Wing) 7 Mtr x 1.2 Mtr. Approved Make: Aultra / Markrich / Leksa / Martin

SITC of On Stage Fixed Valance Bar 13 Mtrs Length Straight as per the design made out of 40NB 48 OD Mild steel pipe dual barrel, supported to hang the Main Valance of the stage system duly powder coated with matt black texture finish paint. All the materials under gone through 7 tank process with various chemical treatment to keep them rust free. Approved Make: Aultra / Markrich / Leksa / Martin

SITC of On Stage Fixed Frill Bar 9Mtrs Length Straight as per the design made out of 40NB 48 OD Mild steel pipe dual barrel, supported to hang the frill, connected with MS Flat duly powder coated with matt black texture finish paint. All the materials under gone through 7 tank process with various chemical treatment to keep them rust free.Approved Make: Aultra / Markrich / Leksa / Martin

SITC of Fixed Wing Structure designed as per site condition for a height approx 7 Mtr x 1.2 Mtr made up of MS Square tube of 25mm or higher size rested on pivotable trolley on a track for the rotation of the wing. Adjustable floor locking screw jacks with rubber grips. Inverted 4-Wheeler Trolley with Flexi Adaptor Clamp and 360° Rotatable. Approved Make: Aultra / Markrich / Leksa / Martin

SITC of Motorized DMX operated Main Curtain 14 Mtrs straight, Centre partting as per design. This mechanisam shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. 415VAC Motor with Brake for Motor System to lift a load which should be synchronized with Motor Control centre Panel. Winch shall have 3 phase motor with an RPM of 1440,KW (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y, Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG:62052Z, IP:55, "AMB:50 degree. The outer surface temperature is limited shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5, Single Reduction 7.5:1 to 100:1 and the size shall be 90. It shall have an drive unit base frame to fix the gear box which contains one shaft Made up of I Track for complete lengthCurtain holding trollies with ball bearing for smoother noiseless movement consisting of 4 wheeler master trolley and 2 wheeler trolley placed uniformly at specific interval of200mm /250 mm throughout the track Overlap of 0.5~0.9 Mtrs. Motor Cable termination box Trollies uniformly distributed along the track at every 200/250mm with a master trolley. Open and close limit controller.Drive unit with suitable capacity of motor unit, Wire Rope shall be of GI Wire ropes Min 3mm Dai Undergone through various chemical treatment to keep them rust free, Black texture finish paint. All metal parts are powder coated "Approved Make: Aultra / Markrich / Leksa / Martin

SITC of Motorized DMX operated Rear Curtain 12 Mtrs straight, Centre partting as per design. This mechanisam shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. 415VAC Motor with Brake for Motor System to lift a load which should be synchronized with Motor Control centre Panel. Winch shall have 3 phase motor with an RPM of 1440,KW (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y, Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG:62052Z, IP:55, AMB:50 degree.The outer surface temperature is limited.It shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5, Single Reduction 7.5:1 to 100:1 and the size shall be 90. It shall have an drive unit base frame to fix the gear box which contains one shaft Made up of I Track for complete lengthCurtain holding trollies with ball bearing for smoother noiseless movement consisting of 4 wheeler master trolley and 2 wheeler trolley placed uniformly at specific interval of200mm /250 mm throughout the track Overlap of 0.5~0.9 Mtrs. Motor Cable termination box Trollies uniformly distributed along the track at every 200/250mm with a master trolley. Open and close limit controller. Drive unit with suitable capacity of motor unit, Wire Rope shall be of GI Wire ropes Min 3mm DaiUndergone through various chemical treatment to keep them rust free, Black texture finish paint. All metal parts are powder coated. Approved Make: Aultra / Markrich / Leksa / Martin

Supply of 24W COB Downlight- Tiltable , CCT- 3000/4000/6500K , CRI ≥80 , Dimensions (mm): 185X127, Cut-Out: 170 , IP 20, DALI Dimmable, surge protectrion: upto 3kV. Approved Make: Aultra / Markrich / Leksa / Martin

Supply of 18W COB Downlight- Tiltable, CCT-3000/4000/6500K , CRI-≥80 , IP20, Dimensions (mm): 120 X 106 .Cut-Out-108, DALI Dimmable, surge protectrion: upto 3kV . Approved Make: Aultra / Markrich / Leksa / Martin

Supply of 18W COB Downlight- Tiltable, CCT-3000/4000/6500K , CRI-≥80 , IP20, Dimensions (mm): 120 X 106 .Cut-Out-108, DALI Dimmable, surge protectrion: upto 3kV . Approved Make: Aultra / Markrich / Leksa / Martin

Supply of DALI Processor Hardware / Processor, Processor (P): 24–36 V- 250 mA, Links (L1 / L2): 24–36 V- 2 A per link, System data stored in non-volatile memory, Timeclock retention for 10 years, Communication: Ethernet, RS485 (QS, RF), ESD Protection: Meets or exceeds the IEC 61000-4-2 standard, Surge Protection: Meets or exceeds ANSI/IEEE C62.41 standard, IP 20. Approved Make: Aultra / Markrich / Leksa / Martin

Supply of Processor DIN Rail QS Power Supply, input voltage: 100–277 V, Frequency: 50/60 Hz, Current consumption, fully loaded (typical):0.5 A (277 V~),0.7 A (230 V~), 1.0 A (120 V~), 1.3 A (100 V~), output voltage and tolerance: 24 V- / ±1%, operating temperature : 0 °C to 55 °C, IP 20. Approved Make: Aultra / Markrich / Leksa / Martin

Supply of Dali Module DIN Rail mounted Load Control Modules, input voltage: 120 / 220-240 V, Frequency: 50/60 Hz, Current : max 120 mA, Lightning strike protection meets ANSI / IEEE standard 62.31-1980. Can withstand voltage surges of up to 6000 V~ and current surges of up to 3000 A, DALI® Bus Output: 16 V- 128 mA guaranteed supply current, 250 mA maximum supply current per bus, Quality Systems registered to ISO 9001:2015, NOM Certified, Operating Range: 0 ºC to 40 ºC, IP 20. Approved Make: Aultra / Markrich / Leksa / Martin

Supply, Installation, Testing & Commissioning of Palladium Keypad Pre-Defined Engraving / 1 Column Matte Finish. Approved Make: Aultra / Markrich / Leksa / Martin

Programming and commissioning charges

Supply, Installation, Testing & Commissioning of High Power 2-Way Loudspeaker with 1 x 12" LF & Rotatable Horn, Frequency Range (-10 dB): 36 Hz – 20 kHz, Frequency Response (±3 dB): 42 Hz – 18 kHz, Coverage Pattern: 120° x 60°, Crossover Modes: Bi-amp/Passive switchable ,Passive Crossover Frequency: 1.5 kHz, Transducer Power Rating LF: 2800 W peak, HF: 400 W peak , System Power Rating- Passive mode:2400 W peak , Maximum SPL (dB-SPL, 1W @ 1m): Bi-amp mode- LF: 126 dB-SPL cont avg (132 dB peak), HF: 133 dB-SPL cont avg (139 dB peak), Passive mode: 123 dB-SPL cont avg (129 dB peak), System Sensitivity(1W @ 1m): Passive mode: 95 dB SPL, Transducers:Low Frequency Driver: 1 x 12 in with (3 in) dual voice coil , High Frequency Driver: 1x1.5 in, Suspension Attachment: 15 points, M10 threaded hardware. Approved Make: Harman / Tannoy / Bayer Dynamics / Bose

Supply, Installation, Testing & Commissioning of High Power 2-Way Loudspeaker with 1 x 12" LF & Rotatable Horn, Frequency Range (-10 dB): 36 Hz – 20 kHz, Frequency Response (±3 dB): 42 Hz – 18 kHz, Coverage Pattern: 90° x 50°, Crossover Modes: Bi-amp/Passive switchable ,Passive Crossover Frequency: 1.5 kHz, Transducer Power Rating LF: 2800 W peak, HF: 400 W peak , System Power Rating- Passive mode:2400 W peak , Maximum SPL (dB-SPL, 1W @ 1m): Bi-amp mode- LF: 126 dB-SPL cont avg (132 dB peak), HF: 133 dB-SPL cont avg (139 dB peak), Passive mode: 123 dB-SPL cont avg (129 dB peak), System Sensitivity(1W @ 1m): Passive mode: 95 dB SPL, Transducers:Low Frequency Driver: 1 x 12 in with (3 in) dual voice coil , High Frequency Driver: 1x1.5 in, Suspension Attachment: 15 points, M10 threaded hardware. Approved Make: Harman / Tannoy / Bayer Dynamics / Bose

Supply, Installation, Testing & Commissioning of Custom Made Mounting Arrangement - Array Frame / Eye bolt kit etc.

Supply, Installation, Testing & Commissioning of Multichannel Digital Network Based Power Amplifier with Power output 4 x 1250W @ 4 Ohms / 8 Ohms, Four-channel Audio amplifier , 4x 1250W at 4 and 8 Ohm, 70Vrms and 100Vrms output on all Four channels, THD (at full rated power, 20Hz - 20kHz) =0.35%, Cooling Continuously variable speed forced air, Voltage Gain Max level= 34dB, Audio Digital channel bus compatibility up to 8 channel, bridgeable channels - even in 100Vrms mode, 2 digital audio bus RJ 45 port, 1 Ethernet R 45 port for monitoring and configuration, Limiters, Input/output EQ, Delay, Matrix Mixer, Speaker Line impedance Monitoring, Damping Factor (20 Hz to 100 Hz) : >1500. Approved Make: Harman / Tannoy / Bayer Dynamics / Bose

Supply, Installation, Testing & Commissioning of 18 in. High Power Subwoofer, Frequency Range : 28 Hz – 1 kHz, Frequency Response (±3 dB): 35 Hz – 1 kHz, Transducer Power : 4800W peak, Maximum SPL :135 peak, System Sensitivity (dB-SPL, 1W @ 1m) :98dB, Capable to support Suspension Attachment, "Grille: Powder coated 14 gauge perforated steel, with acoustically transparent, black foam backing", Nominal Impedance: 8 ohms, LF Driver Size " 18 Inch. Approved Make: Harman / Tannoy / Bayer Dynamics / Bose

Supply, Installation, Testing & Commissioning of Power Amplifier, Input Channels : 2 or better Power output: 3000 watts 2 ohm stereo per ch, 2100 watts 4 ohm stereo per ch, 1200 watts 8 ohm stereo per ch, 4200 watts 8 ohm bridge-mono, 6000 watts 4 ohms bridge-mono or better, Sensitivity (for full rated power at 4 ohms): 1.4V RMS or better, Frequency response (at 1 watt, 20 Hz - 20 kHz): +0 dB, –1 dB or better, S/N Ratio (below rated 1 kHz power at 8 ohms): 103 dB or better, THD: <0.5% or better, Damping factor (20 Hz to 1 kHz):> 500 or better, Crosstalk (below rated power): 20 kHz - 1 kHz: >70 dB or better, Input impedance(nominal):20k ohms balanced,10k ohms unbalanced or better, Maximum input signal: +22 dBu typical or better. Approved Make: Harman / Tannoy / Bayer Dynamics / Bose

Supply, Installation, Testing & Commissioning of Advanced Feedback Suppression Stereo or Dual Independent Channel Processing 2 In 2 Out, Max input line level = +20 dBu, A/D Conversion =24-bit, THD+Noise 0.003%, Wizard Setup Function, Full LCD Display, 24 Programmable Filters per Channel, Live and Fixed Filter Modes, 24 LED per Channel Filter Metering, Input Impedance: Balanced 50kΩ, Unbalanced 25kΩ, Frequency Response: 20Hz – 20kHz, +/- 0.5dB, Crosstalk input to output: >80 dB. Approved Make: Harman / Tannoy / Bayer Dynamics / Bose

Supply, Installation, Testing & Commissioning of High Power 2-Way Loudspeaker with 1 x 12" LF & Rotatable Horn, Frequency Range (-10 dB): 36 Hz – 20 kHz, Frequency Response (±3 dB): 42 Hz – 18 kHz, Coverage Pattern: 120° x 60°, Crossover Modes: Bi-amp/Passive switchable ,Passive Crossover Frequency: 1.5 kHz, Transducer Power Rating LF: 2800 W peak, HF: 400 W peak , System Power Rating- Passive mode:2400 W peak , Maximum SPL (dB-SPL, 1W @ 1m): Bi-amp mode- LF: 126 dB-SPL cont avg (132 dB peak), HF: 133 dB-SPL cont avg (139 dB peak), Passive mode: 123 dB-SPL cont avg (129 dB peak), System Sensitivity(1W @ 1m): Passive mode: 95 dB SPL, Transducers:Low Frequency Driver: 1 x 12 in with (3 in) dual voice coil , High Frequency Driver: 1x1.5 in, Suspension Attachment: 15 points, M10 threaded hardware. Approved Make: Harman / Tannoy / Bayer Dynamics / Bose

Supply, Installation, Testing & Commissioning of High Power 2-Way Loudspeaker with 1 x 12" LF & Rotatable Horn, Frequency Range (-10 dB): 36 Hz – 20 kHz, Frequency Response (±3 dB): 42 Hz – 18 kHz, Coverage Pattern: 90° x 50°, Crossover Modes: Bi-amp/Passive switchable ,Passive Crossover Frequency: 1.5 kHz, Transducer Power Rating LF: 2800 W peak, HF: 400 W peak , System Power Rating- Passive mode:2400 W peak , Maximum SPL (dB-SPL, 1W @ 1m): Bi-amp mode- LF: 126 dB-SPL cont avg (132 dB peak), HF: 133 dB-SPL cont avg (139 dB peak), Passive mode: 123 dB-SPL cont avg (129 dB peak), System Sensitivity(1W @ 1m): Passive mode: 95 dB SPL, Transducers:Low Frequency Driver: 1 x 12 in with (3 in) dual voice coil , High Frequency Driver: 1x1.5 in, Suspension Attachment: 15 points, M10 threaded hardware. Approved Make: Harman / Tannoy / Bayer Dynamics / Bose

Supply, Installation, Testing & Commissioning of Custom Made Mounting Arrangement - Array Frame / Eye bolt kit etc.

Supply, Installation, Testing & Commissioning of Multichannel Digital Network Based Power Amplifier with Power output 4 x 1250W @ 4 Ohms / 8 Ohms, Four-channel Audio amplifier , 4x 1250W at 4 and 8 Ohm, 70Vrms and 100Vrms output on all Four channels, THD (at full rated power, 20Hz - 20kHz) =0.35%, Cooling Continuously variable speed forced air, Voltage Gain Max level= 34dB, Audio Digital channel bus compatibility up to 8 channel, bridgeable channels - even in 100Vrms mode, 2 digital audio bus RJ 45 port, 1 Ethernet R 45 port for monitoring and configuration, Limiters, Input/output EQ, Delay, Matrix Mixer, Speaker Line impedance Monitoring, Damping Factor (20 Hz to 100 Hz) : >1500. Approved Make: Harman / Tannoy / Bayer Dynamics / Bose

Supply, Installation, Testing & Commissioning of Ultra-Compact Indoor/Outdoor Background/Foreground Speaker Two Way 3" Speaker, 1/2” diaphragm tweeter with fluid cooling, Coverage Angle: (100° to 120°) x (100° to 120°), Frequency Range: 70 Hz to 20 kHz, Nominal Impedance : 8 ohms, Power Rating : 200W Peak, Maximum SPL:109 peak, Should have /70100V Transformer Taps, Enclosure Material : High Impact Polystyrene. Approved Make: Harman / Tannoy / Bayer Dynamics / Bose

Supply, Installation, Testing & Commissioning of Dual Channel 80W amplifier, Should have 1x RJ45 connector for Control, 2 output channels with 80W per channel at 4ohm, 8ohm and 70V/100V, Input Sensitivity 1.4Vrms for 8-ohms, Input Impedance 20K ohms/50K ohms, Total Harmonic Distortion : <0.5%, Signal-to-Noise Ratio : >100dB, Crosstalk: >70 dB. Approved Make: Harman / Tannoy / Bayer Dynamics / Bose

Supply, Installation, Testing & Commissioning of Wired Gooseneck Microphone with Desktop base unit and on/off switch for Podium, Desktop gooseneck Mic Audio frequency bandwidth =70 - 18000 Hz, Signal to Noise:64 dB-A, Length =500 mm Voltage =9 to 52 V Power Interface. Approved Make: Harman / Tannoy / Bayer Dynamics / Bose

Supply, Installation, Testing & Commissioning of Wireless Handheld Microphone System, Wireless Microphone system with MHZ carrier frequency band, Up to 16 pre-programmed frequencies within the same frequency band, Audio bandwidth 35 - 20,000 Hz, THD at 1 kHz: <0.3% (Receiver) , Signal-to-noise: 120 dB(A) ( Receiver), Wideband FM Modulation, Up to 48 Simultaneous channels , Upto 14 hours operation with one single AA battery or better, Pilot Tone, transmission to know the transmitter battery status, Receiver should have microphone level and line level output, Transmitter should have display to show the battery and LED to show the Muted /Unmuted status, Sensitivity 6.3 dB V / -100 dBm, Should have Microprocessor-controlled diversity, T.H.D.: 0.7 % (Transmitter), Infrared programmable, RF output power: 10 or 50 mW. Approved Make: Harman / Tannoy / Bayer Dynamics / Bose

Supply, Installation, Testing & Commissioning of Wireless Lavalier Microphone System, Wireless Microphone system with MHZ carrier frequency band, Up to 16 pre-programmed frequencies within the same frequency band, Audio bandwidth 35 - 20,000 Hz, THD at 1 kHz: <0.3% (Receiver), Signal-to-noise: 120 dB(A) ( Receiver), Wideband FM Modulation, Up to 48 Simultaneous channels, Upto 14 hours operation with one single AA battery or better, Pilot Tone transmission to know the transmitter battery status, Receiver should have microphone level and line level output, Transmitter should have display to show the battery and LED to show the Muted /Unmuted status, Sensitivity 6.3 dB V / -100 dBm, Should have Microprocessor-controlled diversity, T.H.D. 0.7 % (Transmitter), Infrared programmable, RF output power: 10 or 50 mW. Approved Make: Harman / Tannoy / Bayer Dynamics / Bose

Supply, Installation, Testing & Commissioning of Wired Dynamic Vocal Microphone, Dual shock mount microphone capsule, Super cardioid vocal microphone, Audio frequency bandwidth :70 - 20000 Hz, Sensitivity2.6 mV/Pa, Electrical impedance: 600 Ohms, Recommended load impedance: 2000 Ohms, XLR Connector, Approved Make: Harman / Tannoy / Bayer Dynamics / Bose

Supply, Installation, Testing & Commissioning of Wired Dynamic Instrument Microphone, Cardioid Dynamic Instrument Microphone, Audio frequency bandwidth 50 - 20000 Hz, Sensitivity at 1000 Hz 2.5 mV/Pa (–52 dBV re 1 V/Pa), Equivalent noise level 18 dBA, Max. SPL for 1 % THD 147 dB SPL, lectrical impedance ≥ 600 Ohms, Recommended load impedance ≥2000 ohms, XLR Connector, Approved Make: Harman / Tannoy / Bayer Dynamics / Bose

Supply, Installation, Testing & Commissioning of Audio Mixing Console and 16 ch with USB Interface, 16 Channels, shall have Ghost Preamps: 12, Sapphyre EQ: 4-band (2 bands of swept mids), Limiters on inputs: 4, Single Engine effects, USB Interface 2-in/2-out, 4 Auxes, 4 mono/2 stereo subgroups, 100mm faders .Approved Make: Harman / Tannoy / Bayer Dynamics / Bose

Supply, Installation, Testing & Commissioning of Control Room head phone for FOH Monitoring Professional studio grade closed-back headphones with auto mute technology Max. Input Power =200 mW, Audio frequency bandwidth=16 - 28000 Hz Sensitivity headphones =104 dB SPL/V, Detachable cable. Approved Make: Harman / Tannoy / Bayer Dynamics / Bose

Supply, Installation, Testing & Commissioning of Powered loudspeaker for Monitoring, 5" Two-Way Powered Monitor Speaker, Frequency Range 43 Hz-20 kHz, Max Peak SPL 108 dB, LF Driver Power Amp 41 W Class D, HF Driver Power Amp 41 W Class D, Input Types : 1 x XLR, 1 x TRS Balanced, 1 x 5" LF Driver, 1 x 1" HF Driver. Approved Make: Harman / Tannoy / Bayer Dynamics / Bose

Supply, Installation, Testing & Commissioning of 4x4 Digital Signal Processor ,DSP with 4 inputs and 4 outputs ,12 Control Inputs and 6 Logic Outputs for GPIO Integration,48V phantom power on all analog inputs ,THD: <0.01% 20Hz to 20KHz, Crosstalk: <-75dB ,Open architecture software configurable ,Logic processing power , Should have speech sense engine ,Digital Audio Bus to transfer digital audio to Amp and other devices ,2 digital audio bus RJ 45 Port , 1 Ethernet port for Monitoring and configuration,Capable to handle +5V unloaded logic output voltage , Capable to control 3rd party devices with TCP IP and RS 232 ,Should have 1nos of RS 232 port for integration with control System, Should have Bi-Directional Locate Functionality, Should have 48 or more digital audio Channel Bus, Should have monitoring LED for COM, STAT, ERR and PWR. Approved Make: Harman / Tannoy / Bayer Dynamics / Bose

Supply, Installation, Testing & Commissioning of Active Direct Box with 1 instrument/line/speaker level input, Frequency Response 20Hz to 20kHz, +/-2.5dB, input connector 1/4" jack, input type unbalanced, RF filtered, Impedance 150k Ohm typical, Max Input +20dBu (0dB pad); +40dBu (20dB pad); +60dBu (40dB pad), Output (Thru) 1 parallel from input jack, 1/4" Unbalanced, RF filtered, Noise <-105dB unweighted, 22kHz BW, THD <0.01%, 20Hz to 20kHz BW; <0.005%, 1kHz. Approved Make: Harman / Tannoy / Bayer Dynamics / Bose

Supply Installation Testing & Commissioning of Audio Floor Box , 6x XLR Inputs , 2 x XLR Outputs

Supply Installation Testing & Commissioning of Long arm Microphone stand

Supply Installation Testing & Commissioning of Short Arm Microphone stand

Supply, Installation, Testing & Commissioning of Speaker Cables, Microphone Cables, Conduits, glands, ferrules, connectors, etc.

30 KVA online UPS three phase inputand three phase output power system of input, voltage range 360V/380V/400V/485V AC, Frequency range 40 Hz-60 Hz±10%, output Voltage range 415±1%, Frequency range 50Hz±1%, Power Factor 0.8/3.1, Harmonic distrotion-<2% THD (Linear load):5% THD (non-liniear load)

S/F of 12V 165 AH sealed maintanance free (SMF) Battery with 24 month replacement guaranty IS : 1652 : 1991

S/F of MS battery rack suitable for 40 to 50 UPS Battery

Add 18% GST

Add 1% Lebour Cess

Sri Ram Enterprises