WBPWDTE/AE/BESD-I/e-NIQ 11 of 2024-25

Amount

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) to light/fan/call bell points [only PVC Rigid Conduit on ceiling and remaining portion concealed] as per GS. Average run 9 mtr [5/E-15]

Distribution wiring in 1.1 KV grade (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), to 5A 3 pin flush type plug socket & Piano Key type switch as per GS. On Board [4/E-15]

S & F double door Horizontal TPN MCB DB with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish as per GS. 6 way (Legrand) [14/ D-10]

S & F double-door SPN MCB DB with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish as per GS. 2+8 way (Legrand/L & T/Seimens) [13/D-9]

S & F 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs as per GS. 6-32A SP (Legrand//L & T/Seimens) [7/D-6]

S & F 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. 40 A DP (Legrand//L & T/Seimens) [6/D-5]

63A FP (Legrand) [6/D-5]

Supplying and fixing Sheet steel Main Switches on angle iron frame on wall at places as per direction of EIC. 63A, 415V (Make-L&T/Havells/HPL) [1(b)/D-1]

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (KEI/Polycab) incl S & Laying 20mm size PVC rigid conduit/ PVC casing capping 'FR' as per GS. 2 x 1.5 sqmm + 1 x 1.5 sqmm [1(i)/E-14]

2 x 2.5 sqmm + 1 x 1.5 sqmm [1(ii)/E-14]

2 x 4 sqmm + 1 x 2.5 sqmm [1(iii)/E-14]

2 x 6 sqmm + 1 x 4 sqmm [1(iv)/E-14]

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall as per GS. 175 mm x 100 mm x 65 mm [11 c /E-4]

100 mm x 100 mm x 65 mm

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board as per GS. [18(a)/E-6]

Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board as per GS. [21/E-4]

S & F 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch with indicator & 16A kit-kat flush type fuse (Anchor) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board asper GS. [25/E-7]

S&F 240 V, 20A, plug socket with separate 20 A Piano key type switch (Anchor) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board as per GS. [22/E-6]

Supply & Fixing 240 V, 20 A plug socket (Brand approved by EIC), without plug top and switch, on existing sheet metal switch board as per GS. [15(b)/E-5]

S&F CFL Lamp (18 W) (Philips)

S&F 40 W Flourescent Tube lamp on existing TFL set (Philips) as per direction of E.I.C. (Philips)

S&F Electronic ballast for 40 W tube light set. (Philips)

S&F TFL starter (Philips)

S&F 40 W Flourescent Tube Light set with lamp (Philips) and electronic ballast Model TMC 501/136 EBE as per direction of E.I.C.

S & F of 4 Ft LED master light for indoor application,18W LED tubes having following Model / Cat No.( Make -Philips) (LED Tube 1200mm 18W 65-81) at Treasury building.

S & F of 4 Ft. single LED light fitting for indoor application,complete with all accessories & 20W LED tubes having following Model / Cat No.( Make -Philips) (LED Tube 1200mm 20W 65-81). TMC 501 P 1xT-LED 22W P3241

S & F of 4 Ft. Twin LED light fitting for indoor application,complete with all accessories & 20W LED tubes having following Model / Cat No.( Make -Philips/Havells) (LED Tube 1200mm 20W 65-81). 2100 Lm TMC 502 P 2xT-LED 22W P3242

S&F Round type surface LED light 12W Cat No- SM250C LED75-6500 PSUWH Make PHILIPS/HAVELLS at ADM(G) Bungalow

Supply upto 2/3.5/4 Core XLPE Insulated and sheated Al/Ar. Cables for working voltages upto 1100 V of following sizes: ( Make Gloster/KEI) 4 core 25 sq. mm.

2 Core 10 sq.mm

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below as per GS. from 2.5 sqmm. To 35 sq.mm.

S & F compression type gland complete with brass gland and finishing of the XLPE/PVC insulated armoured cable ends by soldering with cable sockets as per GS (for AL Armoured Cable) 4 core 25 sq. mm

2 Core 10 sq.mm.

S/L 3x1.5 sq.mm Cu. wire through 19mm bore polythene pipe concealed in wall as to G.S. for the main line from SPNDB to Switch Board

S&F 240 V, 25A Modular starter (Crabtree/Anchor) for AC machine, with Plug Top S&F GI/PVC 4 module switch board as per GS as per direction of E.I.C. (E-17/1(a) & E-17/5(b) & E-19/20)

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works. 20 mm size [7(a)/E-16]

S&F 21A/30A OLP starter (Electron) on existing sheet metal switch board incl. cutting bakelite / perspex top cover

S&F LED Bulk head light at places as per direction of EIC. (Model- LBHP-10-CDL, Make CG) [C2/13]

S&F 3 pole Contactor MNX 32 Coil 240V, up to 500V 50/60 HZ, Cat No CS94111B000 (Make-L&T) at NIC office AC control timer as er direction of EIC.

Excavation of soil for installation of Earth Electrode and filling & ramming. Moorum soil

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), as per GS at CID office. By Tata (M) pipe [2(a)/G1]

S&F LED driver for 72 watt street light at SDO office

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board for CID

S&F 1200 mm sweep/48" Ceiling fan complete set incl. making connection at places as per direction of EIC.

S&F angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling with LED lamp 20 watt. [22/D-13]

GENUINE ENGINEERING WORKS (BID ID -5922033)

R.K.ENTERPRISE (BID ID -5917565)