PROVN OF SPL REPAIR TO BLDG NO. T-01,T-04,T-08,ROOF TREATMENT AND CERTAIN MINOR WORKS UNDER GE SATWARI

Amount

Dismantling asbestos cement (Corrugated or semi-corrugated) sheets in roof covering complete all as specified and directed.

Dismantling of ceiling board(Fibre,pulp,any type of insulation etc) or insulation board / slabs/any thickness including cover fillets and snap grids complete all as specified and directed

Demolition of PCC in ground floor & pavings not exc 15 cm thickness below or above ground level etc complete all as specified and directed

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing removing serviciable tiles to store and rubish of the premises complete all as specified and directed

Demolition of brick work built in cement mortar complete all as specified and directed

Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes,cables,pipe line,pole etc. not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out, in any type of soil, complete all as specified and as directed by Engineer-In-Charge.

Returning filling in, trenches including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in any type of soil complete all as specified

Material and labour for hard core of broken stone or boulder of gauge not exceeding 63mm, deposited, spread and leveled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and as directed by Engineer-In-Charge..

Removing excavated surplus materials to a distance not exceeding 50mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point Note : During excavation/taking out any damage to the existing services like telephone cable,sewage line,electric cable,water supply pipe will be repaired by the contractor at his own arrangement.No extra payment will be born by the deptt on this account.

Taking down chowkat with shutter n.exe 1.50 sqm including iron mongrey and making good in cement mortar in CM 1:3 or cement concrete 1:2:4 type B-1 including applying two coats of existing surface finishes of the building complete all as specified and directed

Taking down chowkat with shutter .exe 1.50 sqm n exc 4.00 sqm including iron mongrey and making good in cement mortar in CM 1:3 or cement concrete 1:2:4 type B-1 including applying two coats of existing surface finishes of the building complete all as specified and directed

Taking down cement plaster of any description on brick or stone walls or from concrete surface incl raking out joints, hacking for key, scrubbing down with water etc all as specified,and removing unserviceable material outside the cantt area complete all as directed.

Brick work with subclass B old size bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and directed

Material and labour for rendering 05mm thick in CM (1:3) as in ceiling finished even and smooth w/o using extra cement complete all as specified and directed

Rendering 15 mm thick in CM 1:4 on brick wall surface or concrete surface finished even and fair without using extra cement including mixing of water proofing compound (WPC shall be measured and paid separately) including all necessary scaffolding complete all as specified and directed

M&L for rendering 15 mm thick in CM 1:6 on other than fair face of brick work/ stone wall surfaces finished even and smooth with out using extra cement including finishing the surfaces as per existing finish accordingly complete all as specified and directed.

M&L cement concrete 25 mm thick type B-0, 1:2:4 (12.5mm graded aggregate) as in sub base complete all as specified and directed.

Plain cement concrete 1:2:4 type B-0 using 12.5mm graded aggregate as in roof padding, similar work complete all as specified and directed

Material and labour for plain cement concrete PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified

Material and labour 75mm thick PCC 1:2:4 type C-1 using 40mm graded crushed stone aggregate as in floor/ plinth protection laid in alternate bays finished even and smooth without using extra cement including joints filling by using mastic filling comprising one part of bitumen 85/25 mixed with three parts of coarse sand by weight complete all as directed.

Rendering 15mm thck in CM 1:4 mixed with integral WPC on concrete surface in roofs incl applying cement slurry @ 3 Kg per Sqm finishing even and fair without using extra cement ( WPC shall be measured seperately complete all as specified and directed

M&L non skid joint free ceramic coloured tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed in CM 1 :4 etc complete all as specified and directed

M & L Glazed digital ceramic tiles in vertical surface 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over 10 mm thick CM 1:4 all as specified complete all as specified and directed

M&L for non skid/anti-scratch ceramic coloured tile 600x600 x 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:4 ,all as specified and directed. complete all as specified and directed

S&F steel window 1.25 mm thick Box type (primer coated) ERW hollow P section of size 60 mm x 25 mm double rebated comprises wire gauged skelton shutter ERW sec 50 mm x 20 mm and 1 mm thick with two Nos of FI section complete welded to frame for holding wire mesh with one vertical mullion of ERW box type T- section of size 60 mm x 25 mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 four No for each window incl following fitting welded to frame shutter hold fast of 150 mm long of 12 mm x 3 mm FI made to shape 4 No, handle of Z section 20 mm x 25 mm x 100 mm long 1 No per leaf, MS tower bolt 150 mm long 2 No per leaf, Z sec 20 mm x 25 mm, 100 mm long stopper 1 No on per leaf, MS Pintal hinges of size 75 mm x 12 mm 2 No per leaf fabrication and fixing arrangement as per drg No CEPZ/TD-324,325/07 complete all as specified and directed

S & F pressed steel frames( factory made) made of size 1.25mm thick MS steel for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 125 x 60mm including one coat of red oxide primer and PCC 1:3:6 as in back fill to chowkats complete all as specified and directed

M& L for 30 mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

M&L for 35mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed

M&L for two coats of synthetic enamel paint over a coat of pink primer on new untreated surfaces of wood of any description, not otherwise described, over 10 cm width or girth including preparation of surfaces complete all as specified and directed

M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth complete all as specified and directed

Preparation of new or previously untreated steel surfaces of any description not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of zinc chrome primer including necessary rubbing with sand paper or grinded by hand grinder to achieve smooth and even surface

S & F butt hinges of mild steel cold rolled medium weight of size 100mm as specified.(ISI Marked) complete all as specified and directed

S&F 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed

S&F 150 mm long aluminium handles cast type anodised complete all as specified and directed

S&F in repairs Aluminium alloy, anodised, sliding door bolt size 250mm (length of bolt) with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed (ISI Marked)

Preparation of new plastered surfaces of wall and applying two coat of cement base paint including a base coat of primer surface complete all as specified and directed

M L for preparation of new plastered surfaces of walls, & applying two coats of oil bound distemper over one coat of primer complete all as specified.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick AZ-70 of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed

Supply and fixing in repair GI snap grid frame work (Grid size 605cm x 605cm) for false ceiling consisting of main runner 'T' of size 24mm x 32mm and 0.3mm thick , Secondary runner 'T' of size 24mmx25mm and 0.3mm thick,GI angle 24mmx24mm and 0.4mm thick,Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI, hot dipped galvanised steel with zink coating not less than 120gm / Sqm ,ceiling grid system duly suspended by 4mm dia GI wire hanging from existing purlins /roof slab with butterfly clips and all necessary accessories including Gypsum ceiling tiles of size 595 x 595 x 9 mm laminated with 0.07 mm thick polyvinyl film on the face side and 10 micron metalized polyester film on the back side fixed on GI snap grid including taking down of old us material complete all as specified and directed by Engr-in- Chage.

Supply and fixing in repair Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality glazing with steel pins,oil putty to steel windows and, beads nails etc to wooden surfaces as in square n exc 0.50 sqm in each pane, all as specified.

Applying Polymeric Polypropylene polymer membrane “APP” (Atactic poly propylene polymer ) modified prefabricated five layer 3mm thick not less than 3 Kg/Sqm over a coat of bitumen primer membrane 0.4ltr/sqm by the same membrane manufactured of density at 25 degree C’ 0.87-0.89 Kg/Liter and viscosity 70-160 CPS, applying a coat of bitumen primer 85/25 grade @ 1.2 Kg/Sqm of surface and then laying APP membrane using butane torch with 10cm over laps which shall be thermo fused by flame and over the APP membrane complete all as specified.

Supply only liquid water proofing compound

Disconnecting existing tanks exc 500 & n exc 1000 litres setting aside (or lowering if required) for repairs, cleaning etc. and hoisting if required reconnecting and re- fixing in position.

S& F for MS work as in staging, framed structure etc angle iron, flats, plates horn like of any shape as directed including cutting and welding to shape required drilling holes notching for wire etc fixed in position complete conforming to Fe-290 Grade -165 complete all as specified and directed

Preparation of old decorated brick /concrete/ plastered /un-plastered surfaces of walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots,rubbing with sand paper and applying one coat of oil emulsion distemper on walls, pillars, cornices surface including making good uneven surface/holes with Birla wall care putty coloured in same shade where ever required. etc. complete all as specified and directed.

Material and labour for applying one coats cement based paint on old surface of wall including preparation of surface complete all as specified and directed

Material and labour for rendering 10mm plastering thick in CM (1:3) on concrete surfaces of ceilling finished even and smooth without using extra cemen complete all as specified and directed

Material and labour for Applying three coats of white wash on new surfaces of ceiling including preparation of surfaces etc complete all as specified and directed

Material and labour for applying two coats of white wash on old surface of ceiling including preparation of surface complete all as specified and directed

Material and labour for repairing of concrete surfaces such as chajjas,upward facia,downward facias,ceiling and similar items with plain cement concret 1:2:4 type B-0 or rendering 10mm thick in CM 1:3 includind dubbing coat without using extra cement finished even and fair including necessory formwork and scaffolding complete all as specified and directed.(Up to fourth storey bldg and no extra payment will be paid for formwork and scaffolding)

Taking up or down steel tubing and connection bore of pipe 15mm dia all as specified and as directed complete all as specified and directed

Taking up or down steel tubing and connection bore of pipe 20 mm dia all as specified and and directed.

S&F GI tubes medium grade bore of pipe 15mm fixed to wall or laid in floors etc complete with all fittings all as specified and and directed by Engr-In-Charge.

S&F GI tubes medium grade bore of pipe 20mm fixed to wall or laid in floors etc complete with all fittings all as specified and and directed by Engr-In-Charge.

Hacking out old broken glass (any thickness,size quality or description) from any types of wooden/steel/alum (up to 4th storey) frames or stone concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed.

M&L mirror polished Machine cut kota stone slab flooring 20-25 mm thick over cement screed bed laid and jointed cement screed bed laidand jointed with grey camant slurry mixed with pigment to match the shade of slab including rubbing and polishing complete for tread of staircase over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed

M&L mirror polished Machine cut kota stone slab 15-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete for risers of staircase over and including 10mm thick fair and even plaster in CM 1:4 after roughing surfaces of old concrete/any type of plaster by picking sweeping down with water to remove dust etc complete all as specified and directed

S&F in repair vitreous china WC Europian pattern size 555x360x400mm, snow white with S trap (excl flushing cistern & flush pipe) & including connection to trap & to flushing pipe anti syphonage pipe and incl seat cover etc complete including making good to floor complete all as specified & and directed. Make :- Cera Cat Part No S1051108 & B1510101 or equivalent

S & F in repair 10 ltrs capacity PVC low level flushing cistern, ISI marked of make specified with inlet, float valve and handle including bracket with 32 mm dia PVC pipe 600 mm long and PVC connection 450mm long complete all as specified and directed Make :- Cera Cat Part No B1010107 or equivalent

S&F vitreous china wash wall hung pedestal basin snow white,flat back of size 550x400mm including 32mm dia PVC waste pipe CP brass waste coupling 32 mm dia full thread , pair of MS angle brackets or MS fastener/ bolts for fixing arrangements 450mm long pvc connection with PVC nut and washer complete at site and all as directed by Engr-in- charge Make :- Cat Part No S2090113 Make :- Cera or equivalent

S&F vitreous china urinal Capriana of size 375x390x590 including 32mm dia PVC waste pipe CP brass waste coupling 32 mm dia full thread with coupling, pair of MS angle brackets or MS fastener/ bolts for fixing arrangements 450mm long pvc connection with PVC nut and washer complete at site and all as directed by Engr-in- charge Make :- Cera Cat Part No S4020112 or equivalent

S&F 15mm bore cast copper alloy chromium plated angle cock with long shank & cup concealed type complete all as specified and directed Make:- Jaguar Cat part No CON-059KN or equivalent

S&F 15mm dia bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed Make Jaquar Cat Part No CON-011KN or equivalent

S&F 15mm bore cast copper alloy chromium plated bib cock two way complete all as specified and directed Make:- Jaguar Cat part No CON-041KN or equivalent

S&F in repair fancy type health faucet with 1 mtr long tube in chrome finish and wall hook (back flow preventer) Make :- Jaquar Cat Part No :- ALD579 or equivalent etc complete all as specified and directed .

S&F in repair fancy type soap dish chromium plated complete all as specified and directed Make :- Jaquar Cat part No CAN-1131N or equivalent

S&F Soap dish holder Make :- Jaquar Cat part No CAN-1131N or equivalent

S&F Toilet roll holder with stainless steel flap Cat Part No Make :- Jaquar CAN-1153S or equivalent

S&F brass chromium plated tubular towel rail 60 Cm long Make :- Jaquar Cat Part No CAN-1111BNM or equivalent

S&F Glass shelf 600mm long complete all as specified and directed Make:- Jaquar Cat Part No AKP-35771P or equivalent

S&F in repairs PVC Grating Square 150mm complete all as specified and directed Make Prayag Cat Part No 115 or equivalent

S&F in repair PVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

Supply and fixing 15mm dia bore galvanised mild steel water tubing medium grade with and including all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed.

Supply and fixing 20 mm dia bore galvanised mild steel water tubing medium grade with and including all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S&F in repair110 mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) bends any radius complete all as specified and directed.

PVC (SWR) junction single (Single T) equal or unequal 75 mm bore complete all as specified and directed.

S&F PVC (SWR) reducers 110 mm bore complete all as specified and directed.

PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.

S&F in repair Soild PVC door frame of size 50mm x 47mm made out of 5 mm plain coloured PVC sheet, reinforced with MS square tube supplying and fixing in opening as per specification and drawing.

S & Fin repair Factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame work made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour P.V.C‘ C’ channel having a PVC sheet strip 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and as gap inserts for top rail; and bottom rail paneling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rail with suitable PVC sheets beading and jointed together with solvent cement S&F in frame at site as per specification.

Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete and similar work conforming to Fe 410-W(Gde-E- 250) quality-A complete all as specified and as directed by Engineer-In-Charge.

S&F butt hinges extruded aluminium alloy with galvanised mild steel hing pin anodised and fixed type C-21, 100 mm size in toilet with PVC doors etc complete all as specified and directed

S&F aluminum handles cast type anodized 100 mm size etc complete all as specified and directed

M&L three coat of white wash on walls including preparation of new plastered surface and complete all as specified and directed.

Supply & Fixing bib cock brass chromium plated 15 mm dia complete all as specified and directed.

Supply & Fixing angular stop cock with wall flange cast copper alloy chromium plated fancy type screwed both ends of size 15 mm dia complete all as specified or as directed by Engr-in-charge

M&L modular type switch, one way 6 Amps , 1 module complete all as specified and directed.

M&L modular type socket 5 pin, 6 A/16 Amps 2 module complete all as specified and directed.

Supply and fix refrigerator, Frost free electric driven (single phase), double door, capacity 330 ltrs or nearest higher size, BEE Star rating: Not less than 3 star rated complete all as specified and directed.

Supply and fix refrigerator, Frost free electric driven (single phase), double door, capacity 310 ltrs or nearest higher size, BEE Star rating: Not less than 3 star rated complete all as specified and directed.

Supply and fixing storage type geyser of capacity 25 ltr 220 volt single phase AC supply, in metallic body five star rated energy efficient including grouting on bolts/studs in wall and making good all as specified and directed by Engr-in-charge.

S&F sub main wiring with single core cable 2x 2.5 sq mm FRLSH insulated Unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1x2.5 Sq mm FRLSH insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface complete all as specified and directed.

Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete one single pole MCB of 20 Amp complete all as specified and directed.

S & F PVC connection heavy duty with PTMT nut & washers for both ends of size 15 mm dia and 450 mm long complete all as specified and directed.

Cutting/screwing existing steel water tubing for additions or alterations complete all as specified and directed.

Supply, installation ,commissioning of metal top deep freezer capacity 320 ltr, single phase 240 volt, 50 Hz complete all as specified and directed.

S&F Voltage stabilizer for automatic operation,copper wound single phase naturally air cooled indoor type & designed for input variation between 90 V to 270 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 1 KVA complete all as specified and directed.

M/S IMTESH BHAT

M/S Shesh Paul Gupta