JJM 2020-2021- K.Myladumparai Block - Package No. JJM / KMP-61

Amount

1. To provide Functional Household Tap connection to Rural Households and extension of pipe line at Varusanadu panchayat

Supply of 80mm GI pipe-

80mm GI coupling

Laying and jointing the 80mm GI pipe line

Construction of 60000 lit OHT Earth work excavating and depositing on bank with initial lead of 10m and initial lift of 2m in hard stiff clay ,stiff block cottom, hard red earth shales, muram gravel stoney earth and earth mixed with small size boulders S.S 20 B - First depth

Earth work excavating and depositing on bank with initial lead of 10m and initial lift of 2m in hard stiff clay ,stiff block cottom, hard red earth shales, muram gravel stoney earth and earth mixed with small size boulders S.S 20 B - Second depth

Filling with the river sand including cost and conveyence of all materials to site and all labourges etc complete.

Cement concrete 1 : 4 : 8 mix using 40 mm gauge hand broken granite stone jelly for foundation including watering where ever necessary and laid in layers not more than 15 cm thick compacting etc complete

Supplying and erecting centering for side and soffits including supports and strutting upto 3.29 m height for plane surfaces in all floors with all cross bracing use mild steels of size 90cm x 60cm and 10 gauge stiffned welded with mild steel angles etc

Plane surface

a)Below G.L

b)G.L to 3.30 m

CURVED SURFACE

SQUARE COLUMN

a)Below Ground level

b)0 - 3.30 m outer column

c)3.31 - to 4.30m outer column

Supplying Fabricating and placing in position of HSD steel rods for reinforcement including the cost of steel and binding wire etc, complete as per standard specification.

Reinforcement Cement concrete 1 : 1.5 : 3 mix using 20mm gauge machine broken hard granite stone jelly for all RCC items of works excluding cost of reinforcement and fabrication charges etc

A) 1.5m to 4.5 Below G.L

B) 0m to 1.50 below G.L

C) 0m to 4.5m from G.L

D) 4.50m to 7.32 m from G.L

E) 7.33m to 10.98m form G.L

Painting in two coats over outer wall surface with approved quality of emulsion paint with colour over one coat of priming coat including cost of materials and labour charges etc.

Fabrication, supply delivery and fixing of out side MS ladder of 45 cm wide made out of 50x50x6mm MS angle for sides and steps in 16mm MS plain rods fixing at 30cm center to center welded, jointed etc., providing with sutable side support, clamps and locking arrangements provided with one coat of red oxide paint for provided access to roof top 1,00,000 lit capacity OHT of sutable inclined lenght including bottom anchorage and transportation of all etc

Providing and fixing of RCC inner access ladder in RCC 1:1.5:3 mix using 20mm metal for OHT including cost of reinforcement placing grill in position centering shuttering charges mixing of concrete curing etc.

Providing Cut stone slab in CM 1:3 and as directed by departmental officers

Providing manhole cover of size 0.60 x 0.60m in RCC 1:1.5:3 with sutable reinforcement 50x50x6mm MS angle fixed along edges and as per departmental officers

Provision for pipe connection arrangemrnts for inlet outlet socur and overflow etc including cost and conveyance of all materials to site etc

65mm dia GI pipe for inlet connection

65mm dia for over flow & rain water harvesting pipe

65mm dia GI pipe for scour pipe

65mm dia GI pipe for delivery pipe

65mm dia GI Tee

65mm dia GI Bend

65mm dia GM Gate valve

65mm dia GI threaded coupler

90mm dia PVC pipe (finolex 6 ksc)

90mm dia PVC Threaded coupler

Refilling the foundation with excavated earth including consolidation as per standard specification

Cosntruction of infiltration well Reinforced cement concrete in 1: 1 1/2: 3 using ordinary portlan cement and 20mm size hard blue granite stone (machine crushed) excluding cost of reinforcement, fabrication and placing the grills in position and excluding cost of shoring and strutting but including curing, finishing and mixing concrete using mechanical mixer machine and compaction by machanical vibrator etc., complete and as directed by TWAD Board Officers.

Sinking of 3.5 M internal dia and 4.50 M external dia below water level including all incidental charges in light (or) sandy soil

First Depth ( 0 - 2.00 )

Second Depth( 2.00 - 4.00 )

Third depth ( 4.00 - 6.00 )

Fourth depth( 6.00 - 8.00 )

Porous Concrete in CC 1: 4 ( one cement and four hard broken granite jelly size 20 MM) for steining of infitration well excluding cost of centering but including curing etc, complete and as directed by TWAD Board Officers.

Brick Work in CM 1: 5 ( one cement and five sand) using country bricks of size 22 X11 X5 CM for steining of 45 CM thick for infiltration well including curing etc complete and as directed by TWAD Board officers

Centering for sides and soffits of R.C.C items including strutting upto 3.3 mt height using MS sheets of size 90cmx60cm and stiffend with welded MS angle of size 25mmx25mmx3mm laid over silver oak (country wood) joists of size 10cmx6.5cm (space at about 90cm c/c) and supported by casurina props of 10cm to 13cm dia 90cmx60cm and BG10 guage (spaced at 75cm c/c) complying with standard specification etc., complete as directed by the TWAD Board Officers.

Plane Surface 0.00 - 3.30 M above GL

Curved Surface 0.00 - 3.30 M above GL

Supply, delivery, fabrication and placing in position of steel rod for reinforcement for binding ring, pillasters, roof slab, well curb including cost of binding wire and labour charges etc, complete and as directed by TWAD Board Officers

Plastering in CM 1:3 (one cement and three sand) 10 mm thick including curing etc, complete and as directed by TWAD Board Officers)

Plastering in CM 1: 5 (one cement and four sand) 20 mm thick including curing etc, complete and as directed by TWAD Board Officers)

Supply, delivery and fixing in position of 50 MM thick RCC Manhole cover of size 0.60 X 0.60 M with necessary reinforcement and MS angle of Size 50 X50 X 6 MM thick fixed alroud the edges of the slab complete and as directed by TWAD Board Officers

Supply, delevery and fixing of CI steps in position at 30 CM staggered manner and as directed by TWAD Board officers

Providing ventilating arrangements by fixing in position of 160 MM OD PVC 6 KSC pipe with PVC cowl and as directed by TWAD Board officers.

Providing confirmatory bores to ascertain sand depth and locating well site before commencing the work

Providing for cutting edge using 12 Guage MS sheets including the cost of fabrication, welding and placing in position in the curb including supply of MS sheet

Colour washing the outside of well plastered surfaces and side of the roof

Plugging the bottom of the well with coarse sand of approved sizes and grade and as directed by the TWAD Board officers

provition for the diversion of water flow by using the sand bags to safety of the execution zone and as per the standard specification

Pipeline works Earth work excavation in all classes of soil for pipe line trench

supply and delivery of 90mm HDPE Pipes-PN 8

Laying and jointing the HDPE Pipes

Re-filling with excavated earth as per standard spesification

80mm GI Coupling

80mm GI Elbow

80mm Gi Bend

80 mm GI Flangeset

80 mm GI H Nipple

80 mm GI Union

90 mm HDPE Bend

90 mm HDPE Tee

Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers.15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

Restoration of road cut portion

Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) .GRIII

Cement concrete 1:4:8 mix using 20mm ISS metal including cost and all cost and conveyance of materials and all labour charges etc complete

Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance and all other labour charges etc complete.

Electro Chloranation Disinfection - common salt as per TWAD SOR - page no -57 clause 21.2

2. To provide Functional Household Tap connection to Rural Households and extension of pipe line in Koilangaulam at Nariyuthu panchayat

Earth work excavation in all classes of soil for pipe line trench

Supply and delivery of 63mm PVC-4Ksc

63mm PVC Elbow

63mm PVC Bend

63mm PVC Endcap

Laying and jointing the 63mm pvc pipe line

Re-filling with excavated earth as per standard spesification

Supply of 80mm GI pipe-

80mm GI elbow

80mm GI coupling

80mm GI gate valve

Laying and jointing the 80mm GI pipe line

Supply of 50mm GI pipe-

50mm GI elbow

50mm GI coupling

50mm GI gate valve

Laying and jointing the 80mm GI pipe line

Provision for 50 mm Water meter - TWAD SOR PAGE 81 , 16 clause

Water meter Dirt BOX

Water meter erection charges

Provision for pit for Water meter 90X75cm

FHTC Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers.15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

Restoration of road cut portion

Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) .GRIII

Cement concrete 1:4:8 mix using 20mm ISS metal including cost and all cost and conveyance of materials and all labour charges etc complete

Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance and all other labour charges etc complete.

Electro Chloranation Disinfection - common salt as per TWAD SOR - page no -57 clause 21.2

3. To provide Functional Household Tap connection to Rural Households and extension of pipe line at Nariyuthu panchayat

Supply of 80mm GI pipe-

80mm GI elbow

80mm GI coupling

80mm GI gate valve

Laying and jointing the 80mm GI pipe line

Provision for water meter 50 mm , page 81 of SOR TWAD

Dirt box

Fitting Charges of Meter in OHT Column

Earth work excavation in all classes of soil for pipe line trench

Supply and delivery of 63mm PVC-4Ksc

63mm PVC Elbow

63mm PVC Bend

63mm PVC Endcap

Laying and jointing the 63mm pvc pipe line

Re-filling with excavated earth as per standard spesification

Supply of 80mm GI pipe-

80mm GI elbow

80mm GI coupling

80mm GI gate valve

Laying and jointing the 80mm GI pipe line

Supply of 50mm GI pipe-

50mm GI elbow

50mm GI coupling

50mm GI gate valve

Laying and jointing the 80mm GI pipe line

Provision for 50 mm Water meter - TWAD SOR PAGE 81 , 16 clause

Water meter Dirt BOX

Water meter erection charges

Provision for pit for Water meter 90X75cm

FHTC Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers.15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

Restoration of road cut portion

Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) .GRIII

Cement concrete 1:4:8 mix using 20mm ISS metal including cost and all cost and conveyance of materials and all labour charges etc complete

Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance and all other labour charges etc complete.

Electro Chloranation Disinfection - common salt as per TWAD SOR - page no -57 clause 21.2

4. To provide Functional Household Tap connection to Rural Households and extension of pipe line in Ottanai at Nariyuthu panchayat

Supply of 80mm GI pipe-

80mm GI elbow

80mm GI coupling

80mm GI gate valve

Laying and jointing the 80mm GI pipe line

Provision for water meter 50 mm , page 81 of SOR TWAD

Dirt box

Fitting Charges of Meter in OHT Column

Distribution line

Earth work excavation in all classes of soil for pipe line trench

Supply and delivery of 63mm PVC-4Ksc

63mm PVC Elbow

63mm PVC Bend

63mm PVC Endcap

Laying and jointing the 63mm pvc pipe line

Re-filling with excavated earth as per standard spesification

Supply of 80mm GI pipe-

80mm GI elbow

80mm GI coupling

80mm GI gate valve

Laying and jointing the 80mm GI pipe line

Supply of 50mm GI pipe-

50mm GI elbow

50mm GI coupling

50mm GI gate valve

Laying and jointing the 80mm GI pipe line

Provision for 50 mm Water meter - TWAD SOR PAGE 81 , 16 clause

Water meter Dirt BOX

Water meter erection charges

Provision for pit for Water meter 90X75cm

Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers.15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

Restoration of road cut portion

Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) .GRIII

Cement concrete 1:4:8 mix using 20mm ISS metal including cost and all cost and conveyance of materials and all labour charges etc complete

Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance and all other labour charges etc complete.

Electro Chloranation Disinfection - common salt as per TWAD SOR - page no -57 clause 21.2

5. To provide Functional Household Tap connection to Rural Households and extension of pipe line in Pinnathevanpatti at Nariyuthu panchayat

Supply of 80mm GI pipe-

80mm GI elbow

80mm GI coupling

80mm GI gate valve

Laying and jointing the 80mm GI pipe line

Provision for water meter 50 mm , page 81 of SOR TWAD

Dirt box

Fitting Charges of Meter in OHT Column

Distribution line

Earth work excavation in all classes of soil for pipe line trench

Supply and delivery of 63mm PVC-4Ksc

63mm PVC Elbow

63mm PVC Bend

63mm PVC Endcap

Laying and jointing the 63mm pvc pipe line

Re-filling with excavated earth as per standard spesification

Supply of 80mm GI pipe-

80mm GI elbow

80mm GI coupling

80mm GI gate valve

Laying and jointing the 80mm GI pipe line

Supply of 50mm GI pipe-

50mm GI elbow

50mm GI coupling

50mm GI gate valve

Laying and jointing the 80mm GI pipe line

Provision for 50 mm Water meter - TWAD SOR PAGE 81 , 16 clause

Water meter Dirt BOX

Water meter erection charges

Provision for pit for Water meter 90X75cm

Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers.15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

Restoration of road cut portion

Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) .GRIII

Cement concrete 1:4:8 mix using 20mm ISS metal including cost and all cost and conveyance of materials and all labour charges etc complete

Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance and all other labour charges etc complete.

Electro Chloranation Disinfection - common salt as per TWAD SOR - page no -57 clause 21.2

6. To provide Functional Household Tap connection to Rural Households and extension of pipe line in Ponnagar at Nariyuthu panchayat

Supply of 80mm GI pipe-

80mm GI elbow

80mm GI coupling

80mm GI gate valve

Laying and jointing the 80mm GI pipe line

Provision for water meter 50 mm , page 81 of SOR TWAD

Dirt box

Fitting Charges of Meter in OHT Column

Distribution line

Earth work excavation in all classes of soil for pipe line trench

Supply and delivery of 63mm PVC-4Ksc

63mm PVC Elbow

63mm PVC Bend

63mm PVC Endcap

Laying and jointing the 63mm pvc pipe line

Re-filling with excavated earth as per standard spesification

Supply of 80mm GI pipe-

80mm GI elbow

80mm GI coupling

80mm GI gate valve

Laying and jointing the 80mm GI pipe line

Supply of 50mm GI pipe-

50mm GI elbow

50mm GI coupling

50mm GI gate valve

Laying and jointing the 80mm GI pipe line

Provision for 50 mm Water meter - TWAD SOR PAGE 81 , 16 clause

Water meter Dirt BOX

Water meter erection charges

Provision for pit for Water meter 90X75cm

Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers.15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

Restoration of road cut portion

Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) .GRIII

Cement concrete 1:4:8 mix using 20mm ISS metal including cost and all cost and conveyance of materials and all labour charges etc complete

Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance and all other labour charges etc complete.

Electro Chloranation Disinfection - common salt as per TWAD SOR - page no -57 clause 21.2

7. To provide Functional Household Tap connection to Rural Households and extension of pipe line in Sengulam at Nariyuthu panchayat

Supply of 80mm GI pipe-

80mm GI elbow

80mm GI coupling

80mm GI gate valve

Laying and jointing the 80mm GI pipe line

Provision for water meter 50 mm , page 81 of SOR TWAD

Dirt box

Fitting Charges of Meter in OHT Column

Distribution line

Earth work excavation in all classes of soil for pipe line trench

Supply and delivery of 63mm PVC-4Ksc

63mm PVC Elbow

63mm PVC Bend

63mm PVC Endcap

Laying and jointing the 63mm pvc pipe line

Re-filling with excavated earth as per standard spesification

Supply of 80mm GI pipe-

80mm GI elbow

80mm GI coupling

80mm GI gate valve

Laying and jointing the 80mm GI pipe line

Supply of 50mm GI pipe-

50mm GI elbow

50mm GI coupling

50mm GI gate valve

Laying and jointing the 80mm GI pipe line

Provision for 50 mm Water meter - TWAD SOR PAGE 81 , 16 clause

Water meter Dirt BOX

Water meter erection charges

Provision for pit for Water meter 90X75cm

Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers.15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

Restoration of road cut portion

Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) .GRIII

Cement concrete 1:4:8 mix using 20mm ISS metal including cost and all cost and conveyance of materials and all labour charges etc complete

Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance and all other labour charges etc complete.

Electro Chloranation Disinfection - common salt as per TWAD SOR - page no -57 clause 21.2

8. To provide Functional Household Tap connection to Rural Households and extension of pipe line in Sukkanodai at Nariyuthu panchayat

Supply of 80mm GI pipe-

80mm GI elbow

80mm GI coupling

80mm GI gate valve

Laying and jointing the 80mm GI pipe line

Provision for water meter 50 mm , page 81 of SOR TWAD

Dirt box

Fitting Charges of Meter in OHT Column

Distribution line

Earth work excavation in all classes of soil for pipe line trench

Supply and delivery of 63mm PVC-4Ksc

63mm PVC Elbow

63mm PVC Bend

63mm PVC Endcap

Laying and jointing the 63mm pvc pipe line

Re-filling with excavated earth as per standard spesification

Supply of 80mm GI pipe-

80mm GI elbow

80mm GI coupling

80mm GI gate valve

Laying and jointing the 80mm GI pipe line

Supply of 50mm GI pipe-

50mm GI elbow

50mm GI coupling

50mm GI gate valve

Laying and jointing the 80mm GI pipe line

Provision for 50 mm Water meter - TWAD SOR PAGE 81 , 16 clause

Water meter Dirt BOX

Water meter erection charges

Provision for pit for Water meter 90X75cm

Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers.15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

Restoration of road cut portion

Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) .GRIII

Cement concrete 1:4:8 mix using 20mm ISS metal including cost and all cost and conveyance of materials and all labour charges etc complete

Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance and all other labour charges etc complete.

Electro Chloranation Disinfection - common salt as per TWAD SOR - page no -57 clause 21.2

Name Board

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

P Pandiaraj