REPAIR TO ROOF, FALSE CEILING, JOINERY AND CERTAIN MISC B/R ITEMS IN ARMY AREA AT MOUNT ABU UNDER AGE(I) UDAIPUR

Amount

Dismantling of AC corrugated/semi corrugated sheet as in roof coverings complete.

Dismantling of Manglore pattern or similar tiles in roofing.

Dismantling of timber battens for tiles of any size including tilting fillets spaced exc. 15 cm etc.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering

Dismantling of timber fillets rails, posts rafters purlins etc under 40 sqcm in section as in unframed work complete.

Dismantling of timber scantling 40 sqcm and over in sections in any position in unframed works.

M&L for second class hardwood (SAL) scantling clean swan in unframed work as in raftar purlines etc all as specified and directed complete.

Supply and fixing of 2nd class hardwood,clean sawn in timber scantling except timber.

Material and labour 2nd class hard wood clean sawn batten for tiles at 30 cm centre of sectional area exceeding 5 sqcm but not exceeding 15 sqcm.

Fixing only 2nd class hard wood clean sawn batten for tiles at 30 cm centre of sectional area exceeding 5 sqcm but not exceeding 15 sqcm.

Material and labour for 2nd class hardwood plain fillets square,rectangular in section exceeding 13 sqcm but not exceeding 25 sqcm clean sawn fixed with nails

Fixing only 2nd class hardwood plain fillets square,rectangular in section exceeding 13 sqcm but not exceeding 25 sqcm clean sawn fixed with nails

S&F galvanised 0.63 mm thick corrugated mild steel sheeting class-8 with two corrugations side lap fixed with L-type or J-type screws in roofs covering

S&F 0.80 mm thick plain galvanised mild steel sheeting in eves board, ridges, hips, valley gutters, drip and straight flashings class 8 with two corrugations side lap fixed with L-type or J-type screws in roofs

Fixing only CGI sheeting of any gauge with two corrugation side lap fixed with 'L' or 'J' hooks in roofs including cup washer etc complete all as directed.

M&L for Manglore pattern tiles in roofing interlocking at side joints, laid dry.

Fixing only Manglore pattern tiles in roofing interlocking at side joints, laid dry.

S&F Clay burnt ridge or hips tiles to suit Manglore pattern roofing tiles bedded and jointed in cement mortar 1:6 etc.

Supply and fixing in repair filleting in any position and to any shape in CM 1:4 including all mitres stops section of filets not exceeding 25 sqcm vertical portion of walls parapets chimney etc complete all as specified and directed.

S & F prepainted 0.50 mm thick gavatume aluminium zinc AZ-150 coating GI based corrugated steel coloured Sheet in tile profile pattern having tensile strength of 550 Mpa as in roof covering & on chajjas fixed with self tapping at aliternate corrugation screws as specified etc.

S & F prepainted 0.50 mm thick gavatume aluminium zinc coating GI based plain steel coloured Sheet having tensile strength of 550 Mpa as in roof serrated ridge fixed with self tapping screws as specified etc.

Material and labour for preparation of tiles battens of any size and spacing and treated with creosote as directed.

S&F fibre glass reinfoerced translucent corrugated sheeting 2mm thick with two corrugation side lap,fixed withL-type or J-type or cranked hook bolts and washer in roof etc complete all as specified and directed.

M&L for mild steel work in wind tie/hold fasts or similar small articles conforming to Fe 290 Gde E-165 complete.

Dismantling wrought iron or mild steel work of any description not otherwise provided.

M&L for rolled mild steel sections in rafters, purlins and posts or hollow square pipe as in tiles battens/ purlins, nut bolts etc . where connected to common rafters and runnuing rails fixed with angle cleats or other connecting plates and nut, bolts etc. confirnimg to Fe-290 (Gde E-165).

Dismantling of wall and ceiling boards, any thickness including cover fillets complete.

Suspended false ceiling system using Chicago metallic (E - grid) exposed suspended system, grid size 600mm x 600mm comprising of GI powder coated Main Runner of dimensions 39mm x 24mm x 0.8 mm thick (Thickness comprising of GI/0.4 mm+ PPPCGS/0.3 mm & weight of runner 1.35 kg for 3600 mm length), Cross Tee of dimensions 29mm x 24mm x 0.8mm thick (Thickness comprising of GI/0.4mm + PPPCGS/0.3mm & weight of Tee 0.195 kg for 600mm length) and Wall angle of dimensions 22.2mm x 22.2mm x 0.65mm thick

(Thickness comprising of GI / 0.35mm + PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length) with and including 4mm thick HPSC (High pressure steam cured) pre primed, self embossed, textured designer board to be placed in the grid system duly suspended with 4mm dia GI wire hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt-0.007 kg/clip), hold down clips (wt-0.0035 kg/clip), with provn of light fixture complete all as per manufacturer instructions and as directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Cutting holes in brick walls built in cement or lime mortar depth of hole exceeding half brick thick but not exceeding one brick thick for inserting hold fasts,roof slab etc and making good dismatled portion in cement mortar (1:3) or cement concrete(1:2:4) type B-1 as required.

Demolition of cement concrete (unreinforced) at any position not otherwise specified.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping etc.

Taking down cement plaster any description on brick or stone walls or wall tiles etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:6 finished even and smooth with out using extra cement complete all as specified and directed

M&L for new or old roof Manglore pattern tiles or any other any pattern by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorecent salts and trading oil and greasy spots, cleaning with water etc. and applying two coats Indigo roof tiles coat premium series over a coat of primer complete all as specified and directed.

Supply and fixing 6mm thick asbestos cement plain building boards fixed in ceiling and,fixed to timber/steel framework

M&L two coat of synthetic enamel paint over old/new wooden surfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primer including preparation of surfaces complete.

Material and labour for two coats of synthetic enamel paint over a coat of zinc chrome primer on steel surfaces of any description over 10cm in width or gith,not otherwise described for including preparation of new surface.

M&L preparation of new plastered surface and applying two coats of cement base paint on walls

M&L preparation of old plastered surface and applying one coat of cement base paint on walls

Preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on walls complete all as specified and directed.

M & L Preparing newly plastered surfaces of walls any apply three coat of white wash complete.

M&L for Preparation of old painted surfaces of wood and wood based surfaces of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

M&L for Preparation of old painted steel surface of any description, over 10cm in width or girth not other wise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on ceiling complete all as specified and directed.

M&L two coats of oil bound distemper (acrylic) white or tinted over 1 mm thick Birla/JK wall putty including preparation of new or old plastered surfaces of walls etc.

Preparation of old decorated surfaces of walls and applying one coat of distempering with acrylic distemper white or tinted complete all as specified and directed.

boon construction company

Choudhary Traders and Engineers

Haritwal traders