Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.8 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹23.8 L+₹97,981 (4.29%)Rejected-AOC VILLAGE DINAK P O KANAID TEHSIL SUNDERNAGAR | BILASPUR | HIMACHAL PRADESH | 174001 | L2 | Rejected-AOC L2 | |
| 3 | L3₹24.7 L+₹1.8 L (8.08%)Rejected-AOC | L3 | Rejected-AOC L3 | |
| 4 | L4₹28.3 L+₹5.5 L (23.9%)Rejected-AOC | L4 | Rejected-AOC L4 | |
| 5 | Not Admitted-Fee/PreQual/Technical/Finance LANE NO 5 HNO 560 SHAM VIHAR TALAB TILLO JAMMU | - | Not Admitted-Fee/PreQual/Technical/Finance Others-Cost of tender not valid |
Tender Value
₹30.0 L
EMD Value
₹60,000
Closing Date
26 Oct 2022, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
XEN Electrical Division No. 1 Shimla
The Executive Engineer Electrical Division No-1 HPPWD Shimla-9
Construction of HPPWD Rest House Near Rajbhawan Shimla-2 H.P SH Providing E.I therein
2022_PWD_66638_1
Electrical Div.No.I PWD Shimla 6026-31dt.12.10.202
Open Tender
Electrical Works
Item Rate
365 days
SHIMLA
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,500
E.E.Electrical Division No-I Shimla-9
₹60,000
26 Feb 2023
19 Oct 2022
27 Oct 2022
19 Oct 2022
26 Oct 2022
19 Oct 2022
Amount
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
Group C
Supplying and fixing 30 Amps key tag with time delay during cut off (Approx 30 seconds) switch mono block with plate 2 M complete with connections testing and commissioning etc as required make havells,legrand,schneider,L&T and anyother approved by engineer in charge
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required..
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 3 nos. 3 pin 5/6 amps modular socket outlets and 2 nos 5/6 amps modular switches, connection etc. as required. (For light plugs to be used in non residential buildings).
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 1 Module TV socket outlet make havells ,L&T or any other make approved by engineer in charge .
P/F , Flexible LED strip with driver having high brightness SMD LED as the light source for indoor application with IP 20 protection , Long life upto 20,000 hours complete with connection testing and commsioning as required at site make Wipro philips syska Bajaj panasonic or any other approved by engineer in charge LED 25 Watt 2700 K per meter wattage 5 watt
Providing and installation of following type of recess mounting square/round type LED panel Light with aluminium die cast housing in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, including making cut in the ceiling to suit the size of the fitting, connections, testing etc. as required: of Approved Make
Square/round LED Panel Light 6/7W Recess
Square/round LED Panel Light 10/12W Recess
Providing and installation of following type of surface mounting square/round type LED panel Light with aluminium die cast housing in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing etc. as required: of Approved Make lumninious efficacy should be minimum 100 L/watt
Square/round LED Panel Light 6/7W Surface
Square/round LED Panel Light 10/12 W Surface
Square/round LED Panel Light 18/20 W Surface
Square/round LED Panel Light 24W Surface
Square LED Panel Light 36 W Surface
P/F , ultra modern, energy saving, surface mounted, microwave sensor based motion detector LED luminaire AC 220-240 V, 50/60Hz with PMMA/ aluminium diffuser comprising of high brightness LEDs complete with connections testing & commisioning etc as required. LED 10 W approved make oppal ,syska havells bajaj or any other approved by engineer in charge lumnious efficacy should be greater than 100 lumens/watt
Providing and installation of following type of LED batten with aluminium housing, anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clamps, connections, testing etc. as required: of Approved Make lumninious efficacy should be minimum 100 L/watt
LED Batten Light 10W
LED Batten Light 20 W
Providing and installation of following type of fancy mirror light with gold finishing and 3 no LED 's anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver length of fixture 25-35 cm; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clamps, connections, testing etc. as required: of Approved Make 3w * 3 watt LED's
Supplying and fixing of fancy wall bracket suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, lamp holder, but excluding lamp including making connections, testing etc. as required: make jaguar havells phillips or any other approved by engineer in charge
Supplying and fixing of fancy double arm wall bracket suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, lamp holder, but excluding lamp including making connections, testing etc. as required: of Approved Make Jaguar ,philips ,K lite or any other approved bu engineer in charge wall light fixture Polycarbonate body, suitable for 9 W retrofit LED lamp B22 base.
Supplying and fixing of fancy bed side bracket suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, lamp holder, but excluding lamp including making connections, testing etc. as required: make jaguar havells phillips or any other approved by engineer in charge
P/F envirnmental friendly, ultra modern, energy saving, surface mounted, decorative over bulk head edge-lit LED luminaire comprising of high brightness LEDs complete with connections testing & commisioning etc as required. LED 9 W approved make syska havells bajaj or any other approved by engineer in chargelumninious efficacy should be minimum 100 L/watt
Supplying and fixing PVC batten/ angle holder including connections etc. as required.
Supply installation testing and commisioning of decorative hanging pendant having suitable capacity Chain/ss wire to bear the load of lumanire and should be asthetically appealing, crystals attached having suitable size of bottom bowl to have the concentration of wire in a single place , space for suitable size of LED bulb, conventional bulbs.Rest should be as per the satisfaction of engineer in charge projection of light downside make jaguar philips or any other approved by engineer in charge
supply installation testing and commisioning of chandelier having suitable capacity Chandelier Chain to bear the load of lumanire and should be asthetically appealing,Chandelier Arm should be able to bear the load of glasses and crystals attached having suitable size of bottom bowl to have the concentration of wire in a single place , space for suitable size of LED bulbs, conventional bulbs.Rest should be as per the satisfaction of engineer in charge Chandelier with chrome finishing circular with minimum downward projection/hang make jaguar ,philips, K lite or any other make approved by engineer in charge
Supplying and fixing of Foot/ Step lights die cast aluminium housing with white powder coated aluminium anti-glare louver & frosted glass cover, with polycarbonate diffuser and IP 44 siutable for 230 v AC at 50 Hz frequency protection including making connections, testing etc. as required. Make: Jaguar ,Philips, Crompton Bajaj, Wipro or any other approved by Engineer-in-Charge
Providing and installation on ventilating fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required: of Approved Make ventilating Fan, Light duty, (Domestic) 225 mm sweep make : orient,havells, crompton or any other make approved by engineer in charge
Providing and installation exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required: of Approved Make
Exhaust Fan, Light duty, (Domestic) 225 mm sweep
Exhaust Fan, heavy duty, (Domestic) 300 mm sweep
Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, making good the damages, electrical connections, testing etc. complete as required:- 25 Liter capacity water heater (Cat-A)
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
2 X 10 sq. mm + 1 X 6 sq. mm earth wire
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.
Armoured cable 95 sq. mm (3.5 core)
Armoured cable 6 sq. mm (twin core)
Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required.
Armoured cable 95 sq. mm (3.5 core)
Armoured cable 35 sq. mm (3.5 core)
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
Providing and installation of following type of LED retrofit lamp B-22/E14/E27 holder base with polycarbonate body and aluminium heat sink; suitable for input voltage: AC 220-240 V, 50/60Hz, including mounting in existing fixture, testing etc. as required complete in all respects. Make: Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge.LED 9 watt
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single pole
Supplying and fixing Higher Rating (80 to 125A) 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.MCB DP 50/63 A 'C' curve
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. RCCB 63 Amp
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
6 way , Double door
8 way , Double door
12 way , Double door
Supplying and fixing 1 module buzzer suitable for single phase,230 V 50 Hz complete as required. Make havells, anchor or any other make approved by engineer in charge
Providing and fixing Call Bell indicator connections, testing & commisioning etc as required 16 way indicator
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 63 mm dia
Supplying and installation of following size of perforated painted with powder coating M.S cable tray with perforation not more than 17.5 % in convenient section, joined with connectors,suspended from the ceiling(if required) with MS Suspenders,including bolts & nuts painting suspenders etc as required MS Cable tray 100 X 50mm
Supplying and laying of UPVC pipes having dimensions 100*50mm having standard length 2 meters required complete in all respect in at site Make : AKG,MK,Precision pipes or any other approved by engineer in charge
Supply, installation, testing and commissioning of Lightning protection system based on Early Streamer Emission (ESE) technology confirming to NFC 17-102 standards. Non electronics based device shall emit electromagnetic impulse in the form of streamer into the air microseconds earlier than naturally. Lightning impulse current acc. To NFC 17- 102 TST EN 50164 1 Nov 2011; Tested & certified by CPRI (Central Power Research institute), Govt. Of India for the impulse current of (8/20) microsecond in 70KA. High quality anti-corrosive; Wind resistance; Advanced Triggering Delta 78 microseconds as per NFC17-102 2011; Radius of protection 82mtr on level 1 (very high protection); 110 mtr protection on level -lV, including accessories, and providing masonry enclosure with cover plate having locking arrangement etc. as required.
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) as required.
Supply and Erection of ornamental pole with decorative light made of cast iron base and ornamental steel design with single arm, should have a service section at the bottom with space to accomdate connecting wires and MCB of 6 amp capacity for control of light , finished pole /arm with coats of paint and primer pole dis 90 mm minimum required concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required.height of pole 3 meters + height of bracket as per the direction of engineer in charge for single arm make : twinkle, Bajaj,crompton,havells or any other make approved by engineer in charge
Supply and Erection of ornamental pole with decorative light made of cast iron base and ornamental steel design with double arm, should have a service section at the bottom with space to accomdate connecting wires and MCB of 6 amp capacity for control of light , finished pole /arm with coats of paint and primer pole dis 90 mm minimum required concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required.height of pole 3 meters + height of bracket as per the direction of engineer in charge for Double arm make : twinkle, Bajaj,crompton,havells or any other make approved by engineer in charge
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm dia
Providing & Laying of one number copper conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required.armoured cable 70 sq mm single core
Providing & fixing compact panel of Supplying and erection of following depth sheet metal cubical panel of of suitable size and depth to accomodate below mentioned switchgear with plus-minus 5 cm variation made from (50 mm x 50 mm x 6 mm thick) M.S. angle iron frame, covered with 1.6 mm thick M.S. sheet duly welded on five sides & front side hinged, complete with locking arrangement ,The cubical pedestal shall have cable entry/exit box at two sides and 4 No. legs of 50mmx50mmx6mm thick M.S. angle iron each 60 cm long including, powder coated painting and CRCA coated bonding to the existing earth etc.,size and specifications of the panel should imclude (MCCB 200 Amp with 35 Ka breaking capacity SPD TYPE1+2 100 KA ) 200 Amp bus bar at incomer and 2 no (100 amp MCCB 25 Ka breaking capacity SPD TYPE 1+2 70 KA) ,1 no copper bus bar 100 Amp Approx size (1440*1100*250 d)mm
Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.100 A 30 KA 4Pole
Supplying and fixing TP&N copper bus-bar chamber suitable for 415 volts capacity with 4 No. copper strip bus-bars each of length and x-section suitable for following current carrying capacities, enclosure made of sheet steel, dust protected, duly powder painted with detachable gland plate and other accessories including drilling holes on the board, making connections, earthing etc. as required. 100 Amp bus bar 24"
supply, installation testing and commissioning of surge protection device ( TYPE 1 + 2 ) with operating voltage 230/400 Volts 50 Hz ,operating current< 1 ma discharge capacity 70 KA should protect the applinace /switchgear from direct /indirect surges IP 20 rated operating temperature should be between -40 to 85 celcius with termination capacity 4 sq mm to 25 sq mm IEC 61643-11 compliant with DIN rail mounting (4 pole (3P+N)) make : L&T,Schnider,ABB or any other approved by engineer in charge
supply, installation testing and commissioning of surge protection device ( TYPE 2 ) with operating voltage 230/400 Volts 50 Hz ,operating current< 1 ma discharge capacity 15 KA should protect the applinace /switchgear from indirect surges and switching surges IP 20 rated operating temperature should be between -40 to 85 celcius with termination capacity 4 sq mm to 25 sq mm IEC 61643-11 compliant with DIN rail mounting (2 pole (1P+N)) make : L&T,Schnider,ABB or any other approved by engineer in charge
Bhardwaj Electrical Co.
M/s Naresh Elecric Works
Sharma and Company
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_100215.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .