REPAIR/MAINT OF FENCING, BOUNDARY WALL IN VARIOUS ZONES AT TALBEHAT MIL STN

Amount

Dismantling post or struts(wood, steel or RCC) any section including taking out embedded portion from natural ground and making good the disturbed ground complete all as specified and as directed by Engr-in-Charge.

Dismantling of Barbed wire fencing or any type and size

Excavation in post holes (or similar holes) each n exc 0.5 cum getting out, returning, filling in and ramming earth and removing surplus soil to a distance n.exc 50 m in soft/loose soil complete all as specified and directed.

M&L for PCC 1:3:6 , type C-2, using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls,or beam horizontal or sloping and similar work exc 10cm but n exc 20cm wide.

S&F MS hand rails, half round or other stock section or core for wooden hand rail,straight portion drilled and countersunk for balusters, running bars, door frame, balusters, nosing to steps including embedding in concrete land screwing etc frame of wiremesh wind tiles for roof including securing bolts, posts, struts in fencing including cutting tops to shape as directed drilling holes, notching for wire etc, flat iron, fillets(for securing wire mesh etc including all necessary drilling bolting welding or reveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed by Engr-in-Charge.

S&F expanded metal welded steel wire fabric, made of GI hard drawn wire mesh of size 25mmX25mm, plain steel wire with hot Zinc coating , fixed to MS frame work complete all as specified and as directed.

Supply only chain link MS galvanised medium coated confirming to as per IS-2721-1979 fencing 75mm x 75mm mesh & 3.00 mm dia of wire complete all as specified and directed.

Fixing only chain link fencing incl line wires, any mesh, size and type to any type of standards, rails, straining bolts etc including provn of binding wire complete all as specified and directed.

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in loose/soft soil complete all as specified and directed.

S&F Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for Chain link fencing confirming to Fe 410-w (Gde E-250) complete.

M&L for 5 to 10 mm dia mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers etc complete all as specified and directed.

S&F galvanised medium coated as per IS -4826, 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel complete all as specified and directed.

Preparation of new steel surfaces of any description n. exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new steel surfaces over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F precast cement concrete louvers and jallies 35 mm thick made in Mix 1:2:4 type B0 using 12.5mm graded stone aggregate set in cement mortar 1:4 etc complete all as specified and directed.

Taking down cement or cement lime plaster on brick wall, ceiling incl. Raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick plaster in CM 1:4 on fair faces of brick work or concrete surface finished even and smooth w/o using extra cement complete all as specified and directed.

M & L preparation new plastered surfaces of walls and providing two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in foundations, fillings, mass concreting complete all as specified and directed.

Demolition of stone/ brick masonry built in cement or cement lime mortar as in portion ordered and directed.

M&L for brick work with old size sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Ditto above item except brick complete all as specified and directed.

Note :- Debris obtained from all items should be removed in low lying areas as directed by Engr-in-charge out of MOD Land. (Rates quoted for items are deemed to be included for this, where removal of debris in the items is not considered.)

M/S A.R BUILDERS

HARNAM SINGH ANIL SINGH

M/S SHIVA TRADERS