Provision of certain miscellaneous works for Military Hospital at Sanjauli Shimla under GE Jutogh

Amount

10 mm thick polycarbonate multi wall sheet, both side UV coated, fixed with coach/ self taping screws and washers and fixed on MS framework as directed complete all as specified.

MS rolled sections confirming to F-410-W(Gde-E-250) quality B as in framing for cladding , glazing and the like fixed complete all as specified.

Preparation of new steel surfaces of any description not exceeding 10 cm width or girth not otherwise described, applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified.

Excavation over areas not exceeding 1.50 mtr deep and getting out in hard/dense soil complete all as specified.

Plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundations filling and mass concrete complete all as specified.

Mild steel TMT bars 10 mm dia and over, cut to length, bend to shape required, including cranking, bending, spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified.

Mild steel TMT bars 5 mm dia and over upto and including 10 mm, cut to length, bend to shape required, including cranking, bending, spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips as in stirrups, spacers etc , complete all as specified

Use and waste of formwork to sides of concrete foundations, footings, bases of column, raft and raft beams, sides and soffits (if any ) of foundation and plinth beams and similar work, vertical or to batter, for fair finished suraface of concrete complete all as specified.

Cement concrete in 1: 2:4 type B1 (using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams , bases for columns etc, basement slabs, and mass concrete complete all as specified.

Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw , including bending and welding angles, as necessary , gusset plates, riveting etc not exceeding 10 kg each brackets, conforming to Fe 290 Gde E-165 complete all as specified.

GI pipe 50 mm bore of heavy grade for vehicle movement etc fixed as directed complete all as specified.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.

Returning , filling in including spreading, levelling, watering and well ramming in layer not exceeding 25 cm complete all as specified.

2 mm thick 300 mm wide stainless steel corner/kick plate SS 304 grade fixed to wall with and including 50 mm long countersunk stainless steel screws (flush to the surface of SS plate) at 300 mm centre to centre spacing on top and bottom edge of the plate in staggered pattern, all joints and corners welded as per manufacturer's instructions whereever necessary, all edges rounded/smoothened complete all as specified and directed.

Powder coated aluminium 6 mm thick DG 102 including U channel and fixing with suitable screws to windows complete all as specified.

1000 mm dia convex mirror with PVC back case including vertical pre-painted MS pipe of 80 mm dia for fixing complete all as specified.

800 mm dia convex mirror with PVC back case including vertical pre-painted MS pipe of 80 mm dia complete as specified.

Excavation in for post holes(or similar holes) each not exceeding 0.5 cu.m getting out in soft/disntegrated rock and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified.

Cement concrete 1:2:4 type B2 (using 40 mm graded stone aggregate) as in foundation , filling and mass concrete work complete all as specified.

M/S Meera Builders

M/S kuldeep kumar khullar

N K Gupta Builders Pvt. Ltd.

R. P. Suppliers and Construction Co.