SPL REPAIR TO C-2 BLOCK QUARTERS AT VIVEK VIHAR COLONY, RESIDENTIAL COMPLEX AT LUCKNOW UNDER GE (WEST) LUCKNOW

Amount

Taking down cement plaster on brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches , pillars etc complete all as specified and directed.

M & L for brick work using fly ash brick conforming to IS-12894:2002, Non Modular, class designation 7.5, straight or curved on plan, exc 6.0 m mean radius, built in CM 1:6, complete all as specified and directed.

M & L for brick work with fly ash bricks conforming to IS-12894:2002, Non Modular, class designation 7.5, straight or curved on plan to any radius in half brick thick walls, in CM 1:4, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair face of brick work of walls, finished even & smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work of walls, mixed with water proofing compound (ISI marked) @ 2% by weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified and directed.Note : - Supply only water proofing compound shall be measured and paid for separately.

M&L for 10 mm thick rendering in CM (1:3 ) on ceiling surfaces finished fair and even complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying three coats of white wash complete all as specified and directed.

Supply only integral water proofing compound, ISI Marked complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer over & including a coat of 1mm thick white wall care putty , complete all as specified & directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of weather proof coat paint over one coat of Birla putty and primer of approved shade/tint complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of ceilling and applying one coat of white washing on ceilling complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness below and above ground level, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.complete all as specified and directed.

M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors joints free, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and directed.

M&L for glazed ceramic tiles (coloured) 300x600x7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering (as screed bed) in cement & sand mortar 1:4, complete all as specified and directed.

M&L for vitrified tiles dark shade double charge (coloured) 10mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and directed.

M&L machine cut Kota stone slab flooring 18-20mm thick over and including 15mm screed bed in cm 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and granite polish on Kota slab stone complete all as specified and directed.

All as per item No 19 here in above but on vertical surfaces such as dado/skirting etc over and including 10 mm thick screed in CM 1:4 complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished even and smooth complete all as specified and directed. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specified and directed.

Taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc.complete all as specified and directed.

Taking up or down steel water tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and directed.

M&L for cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing etc. and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed.

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.

M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, seat cover and flush pipe 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified and directed.

S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts (excluding tap, waste chain & plug),complete all as specified and directed.

S&F in repair PVC connection 450 mm long suitable for 15 mm bore GI pipe including CP brass nuts on both sides, complete all as specified and directed.

S&F in repairs long body 15mm bore bib tap, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.

S&F in repair CP angle valve long body for 15 mm bore pipe with capstan head long screwed shank including chromium plated cover plate fancy type complete all as specified and directed.

S&F in repair 15 mm bore CP brass Central Hole wash hand basin mixture fixed to GI pipe complete all as specified and directed.

S&F in repair 15 mm bore CP brass wall mixture fixed to GI pipe complete all as specified and directed.

S&F in repair hand shower (Health faucet) with 1 Mtr flexible tube with wall hook bracket etc, complete set of superior quality complete all as specified and directed.

S&F toilet paper holder CP complete all as specified and directed .

S&F glass corner self assembly, fancy type, made of 6 to 7mm thick sheet toughened glass of size 250x250mm, fixed with CP brackets, complete all as specified and directed.

Supply & fix sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair CP brass tubular towel rail, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified and directed.

S&F in repairs brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified and directed.

S&F in repairs PVC(SWR) 75 mm bore floor trap plain with grating including jointing with solvant cement complete all as specified & directed.

S&F in repair PVC water tank 1000 litre capacity rotational moulded (cylindrical vertical with close top) hoisted and fixed in position complete all as specified and directed.

S&F 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and directed.

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20 mm bore, complete all as specified and directed.

S&F in repair stainless steel curtain rod 25mm dia including brackets and fancy type end knobs, complete all as specified and directed.

Demolition and breaking up or taking down PVC/AC/CI/SGSW 100mm/75mm bore drain pipes, set in cement mortar including PCC haunching and bedding, complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend, any radius complete all as specified and directed.

S&F 75mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.

S&F 75mm bore PVC (SWR) bend, any radius complete all as specified and directed.

S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F PVC(SWR) 110mm dia branch piece, single(single Y) equal or enequal with access door complete all as specified and directed.

S&F PVC(SWR) 75mm dia branch piece, single(single Y) equal or enequal with access door complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each, complete all as specified & directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqm each, complete all as specified & directed.

M&L plain cement concrete cast in situ 1:3:6 type C1 using 20 mm graded stone aggregate as in copings,hold fast,back filling of pressed steel frame and other similar work water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc including form work complete all as specified and directed.

S&F pressed steel frame for door with one or more rebates size 125x60mm including necessary fixing lugs, lock striking plates,hinges,hold fast etc. size /profile of frame as per IS complete all as specified and directed.

S&F pressed steel frame for door with one or more rebates size 105x60mm including necessary fixing lugs, lock striking plates,hinges,hold fast ,etc. size /profile of frame as per IS complete all as specified and directed.

M&L 35mm thick factory made shutter plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fixing factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F Factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing complete all as specified and directed.

S&F butt hinges of size 100 mm medium weight, stainless steel ISI marked complete all as specified and directed.

S&F aluminium handle, 150mm size, cast type, anodized (ISI marked) complete all as specified and directed.

S&F 200 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified and directed.

S & F Aluminium alloy anodised sliding door bolt with hasp, stape (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 300mm long complete all as specified and directed.

S&F mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

S&F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F mild steel Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including welding work complete all as specified & directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples complete all as specified and directed.

M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified and directed.

Demolition of reinforced cement concrete in floors ,beams ,chajjas,landing slab in any position or height and similar suspended works complete all as specified and directed.

M/L RCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in slab,chajjas,beam etc complete all as specified and directed.

Form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work n.exc 200mm thick complete all as specified and directed.

M&L 8 to 10mm dia and over deformed bars, cut to length, bent ot shape required, including cranking, bending , hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia) icluding welding,rivetting etc complete all as specified and directed.

Repairing of RCC projections chajjas, roofs, facia etc by necessary preparation, scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC and providing cement concrete (1:1.5:3) using 12.5 mm graded crushed stone aggregate including necessary form work and reinforced with chicken wire mesh and rendering in cement mortar 1:3 using coarse sand in patches area not exceeding 5 sqm each and thickness of RCC member not exceeding 100mm including applying two coats of finishes as provided to the existing surfaces to match with the existing surfaces at any height complete all as specified and directed.

M & L for sunken treatment as under:- (a) Taking out existing water proofing treatment in sunken floors including taking out floor finish, PCC filling, traps etc and cleaning & washing the RCC surface to recieve water proofing treatment and removal of the retrieved material where directed. (b) Making fillet of size 25mm x 25mm at corner of slab and wall with polymer modified cementitious (PMC) mortar consisting of one part of tapecrete P-151, two parts of cement and 6 parts of fine sand by weight. (c) Sealing of joints of pipe with epoxy putty CICO POXY LC or epoxy mortar CICO POXY 2125. (d) Applying a coat of tapecrete P-151 Acrylic Polymer Modified cementitious slurry consisting of one part of TAPECRETE P-151 and two parts of cement by weight. The coating shall be carried out upto 300mm above FFL and shall be allowed to dry for 4-6 hours. Cont..../-

(e) Appying a coat of TAPECRETE brush topping 1.5mm thick consisting of one part of TAPECRETE P-151, two parts of cement and two parts of silica sand by weight and cured to 2 days. (f) Applying 15mm thick plaster in CM 1:4 mixed with CICO super @ 100 ml per 50 Kg cement on treated surface. (g) Filling the sunken portion with PCC 1:5:10 type E-2 (using 40mm graded stone aggregate) upto required level complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness laid dry complete all as specified and directed.

M&L 100mm thick cement concrete 1:5:10 type E2 (using 40mm graded stone aggregate) in sub base of flooring/hardstanding complete all as specified and directed.

M&L for 60mm thick rubber moulded coloured interlocking precast PCC pavers in any colour of M-35 grade laid over and including 40 mm thick sand cushioning and joint filled with fine sand incl levelling, tamping and sweeping etc complete all as specified and directed

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete with fitting such as switches, sockets ceiling rose, sketch light fittings etc, and making good the disturbed surface of walls and floors etc complete all as specified and directed.

Taking down carefully main switches DB's/ MCB DB's and making good the disturbed surfaces of walls complete all as specified and directed.

Taking down carefully copper/aluminium sub main wiring/ service connection including teak wood batten/ conduit and making good the disturbed surfaces of walls complete all as specified and directed.

Material and labour for point wiring with PVC insulated 1.5 sqmm FR multistranded copper conductor cable (Phase - Red, Neutral - Black) 1100 volts grade drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings and fixing accessories including sunken galvanized pressed steel terminal boxes of thickness 1.12 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting electrical fittings, fixtures, accessories etc and 1.5 sqmm FR multistrand copper conductor cable (Green) as continuous earth wire complete all as specified and directed for the following :-

One light/fan point controlled by one switch.

One ceiling/exhust fan point controlled by one switch.

One socket outlet 6/5 amp controlled by one switch on the same board.

One socket outlet 6/5 amp controlled by one switch on indepdendent board.

Call bell / buzzer point controlled by one bell push

All as per item 85 here in before but using 2.5 sq mm PVC insulated, stranded copper conductor single core cable for one 3 pin 15/16 Amp socket out let point on an independent board.

S&F switch piano flush button single pole one way 5 Amp 240 volt complete all as specified and directed.

S&F switch piano flush button single pole one way 15 Amp 240 volt complete all as specified and directed.

S&F socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts complete all as specified and directed.

S&F socket outlet flush type multipurpose 2 in 1, 3 pin 5/6.Amp, 230 volts complete all as specified and directed.

S&F ceiling rose surface bakelite three terminal complete all as specified and directed.

S&F bell push single pole one way 5 Amp, 240 volt flush type complete all as specified and directed.

S&F Call bell AC single pole 230 Volts complete all as specified and directed.

S&F angle type holder insulated body with back plate suitable for batten fittings complete all as specified and directed.

Supply & fixing fan regulator electronic step type for ceiling fan fixed in existing board and connecting as directed, after dismantling and removing unserviceable surface type regulator complete all as specified and directed.

Supply and Fixing in repair wall/surface mounting luminaires integrated LED Batten 18/20W, 6000 K, 230V with aluminium housing & integrated electronic driver complete including electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed.

Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten (2 feet) 9/10 W, 6000 K, 230V,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed.

S&F in repair LED building security light 25 Watt with high power LED source (>110 lumen/watt) PDC housing, IP65 with 4 KV inbuilt surge protection driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts complete all as specified and directed.

Supply and fixing LED lamp 7/9 watt, complete all as specified and as directed.

M & L Earthing complete with glavanised steel earth plate elactrode 600x600x6 mm thick buried directly in ground with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nut , bolt, check nut and washer of galvanised iron or of steel, earth lead protected by 15 mm dia GI pipe light grade watering pipe 20 mm dia GI light grade GI wire meshed funnel alternate layer of charcoal and salt PCC chamber, recessed for and including RCC cover including all necessary excavation and earth work, earth wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate no 5 of MES SSR Pt-I 2009 print, complete all as specified and directed.

S & F sheet metal enclosure for TPN, 4 ways 415 volt with 200 Amps rated bus bar made out of 16 Gauge sheet steel double door complete all as specified and directed.

All as per Srl item 101 here-in-before but 8 ways, SPN, 240 volts.

All as per Srl item 101 here-in-before but 2 ways, SPN, 240 volts.

S&F MCB single pole 6 to 32 Amp 240 volts 10 KA breaking capacity complete all as specified and directed.

Same as item No 104 herein before but 40 Amp, 240 volts, single pole & neutral complete all as specified and directed.

S&F MCB TPN 63 Amp 240 volts 10 KA breaking capacity complete all as specified and directed.

Material and Labour for SubMain wiring with two single core PVC insulated (FRLS) cable with 4 sqmm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4.0 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit concealed/surface conduit complete all as specified and directed.

rajan construction

M/S Chandra Mohan and Sons