Complete mechanical repairing of 168 kw ,3.3 kv,3phase ,4pole, GEC make ,110 kw 3.3 kv,3 phase ,4 pole, Alstom make and 400 kw ,3.3 kv,3 phase ,4 pole ABB make Induction motor used in pumping operation at different location of mines w.r.t Konar exp,

Amount

168 Induction motor complete dismantling with rotor shaft & both and bearing cover & bearing (DE&NDE).

168KW Induction motor both side bearing cover fabrication as per existing sample with cast iron casting ,machining ,drilling ,tapping ,grooving, sizing as per size & sample .

168 KW Induction motor both side bearing Housing fabrication as per existing sample with cast iron casting ,machining ,drilling tapping grooving, sizing as per size & sample .

Rotor shaft repairing by electrode welding, Machining on bearing fitting place or sleeve making as per bearing size with rotor dynamic balancing

Fabrication of new fan and fan cover with casting/cutting , machining and grinding as per size and sample

Complete motor coil varnishing /heating insulation tapping of lead etc

Isolated Terminal box making with stud, bush, lug etc required material

After Repairing & rectification Commissioning Complete motor set fitting with both bearing cover, bearing housing and bearing after greasing.

Finishing with Epoxy paint (two or more coats) complete motor set and applied as per manufacturer’s specifications including appropriate Priming coated.

Induction motor complete dismantling with rotor shaft & both and bearing cover & bearing (DE&NDE).

Rotor shaft bearing housing repairing by electrode welding/sleeve making as per bearing size with rotor alignment etc.

Gas heating and cutting grinding etc work of both end connection point, strip bars for old damage bar dismantling.

End cover housing repairing by C.I. electrode welding and machining as per bearing size

Complete motor coil varnishing /heating insulation tapping of lead etc

Damage/Old bearing opening by puller and gas cutting after opening of bearing, new bearing fitting/setting/greasing

After repairing and changing strips bars complete new breezing and copper bars shape making and fixing small slot grinding machine of breezing point

Fabrication of new fan cover

Terminal box making with required material

After Repairing & rectification Commissioning Complete motor set fitting with both bearing cover, bearing housing and bearing after greasing.

Finishing with Epoxy paint (two or more coats) complete motor set and applied as per manufacturer’s specifications including appropriate Priming coated.

complete dismantling with rotor shaft & both and bearing cover & bearing (DE&NDE).

Rotor shaft repairing by electrode welding, Machining on bearing fitting place or sleeve making as per bearing size with rotor dynamic balancing.

After cleaning repairing re –setting of rotor by with breezing by silver rod ,gas heating .etc

Complete motor coil varnishing /heating insulation tapping of lead etc.

End cover housing (DE/NDE) repairing by CI electrode welding and machining as per bearing size

Replacement of old damaged bearing with new one both side DE/NDE Bearing no-NU 320 (DE)

Replacement of old damaged bearing with new one both side DE/NDE Bearing no-6320C3(NDE)

Terminal box Fabrication /making with insulated Bush & stud material

Fabrication of new fan & fan cover with key slot & key

Gas heating and cutting, grinding work of both end connection point strip bars with damaged bar dismantling.

After Repairing & rectification Commissioning Complete motor set fitting with both bearing cover, bearing housing and bearing after greasing.

Finishing with Epoxy paint (two or more coats) complete motor set and applied as per manufacturer’s specifications including appropriate Priming coated.

Total impact of GST for the purpose of CTC

M/S SHREE TIRUPATI TRADERS

M/s Kiran Electrical works