SENL/SOPD-G/2020-21/NAL-20 (Construction of Bhitha Mahal Hospital Road under SOPD -G)

Amount

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and tree of girth up to 300mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150mm in thickness as per tech.spf.cl201.(i)By Manual Means (A) In area light jungle

Construction of embankment with approved materials deposit from borrow pits, with a lift up to 1.50 m transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-1 and 300-2 with a lead up to 1000 m as per Technical Specification Clause 301.5 (i) Private Land

Construction of sub grade and earthen shoulder with approve materials obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2 with lead up to 1000 m as per Technical Specification Clause 303.1(i) Private Land

Construction of granular sub-base by providing well graded materials, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification Clause 401. ii) For Grading I materials

Providing, laying, spreading and compacting stone aggregate of specified sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel 80-100 KN in stages to proper grade and camber, applying and brooming stone screening/binding material to fill-up the interstices of coarse aggregate, watering & compacting to the required density grading-2 as per Technical Specification Clause 405 Using stone screening. (2)Grading II material(A) By Manual means

Providing, laying, spreading and compacting stone aggregate of specified sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel 80-100 KN in stages to proper grade and camber, applying and brooming stone screening/binding material to fill-up the interstices of coarse aggregate, watering & compacting to the required density grading-2 as per Technical Specification Clause 405 Using stone screening. (3)Grading III material(A) By Manual means

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and applying primer at the rate of 0.70-1.0 kg/sqm using Mechanical Means as per Technical Specification Clause 502.

Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate 0.25 to 0.30 Kg. per sqm on the prepared bituminous surface cleaned with hydraulic broom as per Technical Specification Clause 503.

Providing laying and rolling of open graded premix carpet of 20 mm thickness composed of 13.2 mm 5.6 mm aggregates either using penetration graded bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with smooth wheeled roller 80-100KN static roller capacity, finished to required level and grades to be follow by seal coat of either Type A, type B or type C as per Technical Specification Clause 508. Case –I: By Manual Means. (iii) Crumb Rubber Modified Bitumen

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified level, grade and cross fall using type A, Type B and Type C as per Technical Specification Clause 10 Case –II: Type B (iii) Crumb Rubber Modified Bitumen

Planting trees by the road side (Avenue trees) in 0.60m dia holes 1m deep dug in the ground mixing the soil with decayed farm yard/sludge manure planting the saplings backfilling the trenches watering fixing the tree guards and maintaining the plants for one year

Planting lines, Dashes Arrows etc. on Road in Two Coats on New Work with ready mixed road marking paint conforming to IS: 164 in bituminous/concrete surface including clearing the surface of all dirt dust and other foreign matter, demarcation at site and traffic control as per drawing and technical specification Clause 1702.

Providing and fixing retro –reflectorised cautionary mandatory and informatory sign as per IRC 67 made of encapsulated leans type reflective sheeting vide Clause 1701.2.3 fixed over aluminum sheeting, 1.5mm thick supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 450mm x 450mm x 600mm, 600mm below ground level as per approved drawing and technical specification Clause 801 (ii) 60cm equilateral triangle

Earth work in excavation of structures as per drawing and technical specification cl.305.1 including setting out ,construction of shoring and bracing ,removal of stumps and other deleterious material and disposed up to a lead of 50m,dressing of sides and bottom and back filling in trenches with excavated suitable material.(i)ordinary soil (ii)3m to depth

Laying concrete cradie bedding with M15 Grade Cement Concrete as per Cl. 1105

Providing concrete for plain/reinforcement cement in open foundation complete as per drawing and technical specification Cl. 802, 803, 1202 & 1203 (A) With crushed stone (II) PCC grade M15

Providing & laying RCC pipe NP-3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection work, backfilling, concrete and masonry in head walls and parapets clause 1106 (B) 1000mm dia

Brick masonary work in cement mortar in foundation of Head Wall excluding pointing & Plastering as per Drawing and technical Specification Cl. 1109

Brick masonary work in cement mortar in structure complete excluding pointing & Plastering as per Drawing and technical Specification Cl. 602, 603, 604, 1202 & 1204.

Plastering with cement mortar (1:4) 15mm thick on brickwork in substructure as per technical specification Rate

SANATAN DAS

Dimbeswar Bezbaruah