Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹31.9 LAccepted-AOC | L-1 | Accepted-AOC L-1 | |
| 2 | L-2₹33.0 L+₹23,064 (0.70%)Rejected-Finance | L-2 | Rejected-Finance L-2 | |
| 3 | L-3₹34.8 L+₹2.1 L (6.28%)Rejected-Finance PLOT NO 32 FF SHIVAJI ENCLAVE NEW DELHI 110027 | NEW DELHI | NEW DELHI | DELHI | 110027 | L-3 | Rejected-Finance L-3 | |
| 4 | L-4₹34.9 L+₹2.1 L (6.54%)Rejected-Finance | L-4 | Rejected-Finance L-4 | |
| 5 | L-5₹35.0 L+₹2.2 L (6.77%)Rejected-Finance | L-5 | Rejected-Finance L-5 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
12 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) FARIDABAD
GE (AF) FARIDABAD
ADDN/ALTN TO P-109 AND P-111 AND OTHER E/M INSTALLATION AT AF STN CHANDINAGAR IN AOR OF GE (AF) FARIDABAD
2024_MES_642058_1
GE (FBD)/AF-90/2023-2024
Open Tender
Civil Works
Item Rate
180 days
Chandinagar
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) FARIDABAD
₹90,000
Yes
10 Apr 2024
13 Feb 2024
14 Mar 2024
13 Feb 2024
12 Mar 2024
27 Feb 2024
13 Feb 2024 - 17 Feb 2024
Amount
Taking down of old existing roof treatment of any description incl scrube and remove loose concrete, brick tiles, mud fuska, plaster, bitumen, oil grases and any other materials that might effect adhesion by wire brushing the surface and cleaning of the surface thoroughly with water and disposed off old materials from site complete all as specified and directed by Engineer-in-Charge.
M&L for 50 mm thick cement concrete 1:2:4 type B-0 ( using 12.5 mm graded stone aggregate) as in padding/ base on roof complete all as specified and directed by Engineer-in-Charge.
M&L for 20 mm thick plastering in CM 1:4 on RCC roof slab, finish even and smooth for receive water proofing APP membrane using WPC @ 3% by weight of cement complete all as specified and directed by Engineer-in-Charge. Note : WPC will be measured and paid separately.
Supply only Integral water proofing compound complete all as specified and directed by Engineer-in-Charge.
M/L for preparation of the plastered roof surfaces and fix the APP polymeric water proofing membrane of minimum 3 mm thickness & weighing not less than 3.5 kg / sqm of, black finished reinforced with non-woven ployster 160 gsm matt with a the rm of usible finish laid over primer confirming to IS:3384-1965 @ 0.5 kg/sqm and thereafter apply compitable hot blown bitumen 85/25 @ 1.20 kg/sqm torching overlaps with a propane or a butane gas torch with a overlap of 75 mm at the sides and 100 mm at the end sealing complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exc 1.50 sqm but n. exc 4.0 sqm each complete all as specified and directed by Engineer-in-Charge.
All as per item No 06 above but not exc 1.5sqm each.
M&L for Brick work with sub-class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 incl demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar complete all as specified and directed by Engineer-in-Charge.
M&L for 1ST Quality Non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11sqm but n.exc 0.18 sqm, in floors etc. set and jointed in neat slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 for laying floor finishes incl dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.
M&L for Glazed ceramic coloured/printed tiles in vertical surface of size 450x300-350x7-8mm thick as in skirting and dado set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick backing coat in CM 1:4 incl dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.
M&L for 20mm thick granite (of any type) work (table rubbed and polished ) in steps, jambs, pillars, window cills, cooking plateforms and like including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including moulding work on exposed edges of granite stones incl 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-in-Charge.
M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed , pointed in neat cement slurry in floors with grey pigment cement and pigments incl and 15mm thick screed bed in CM 1:6 for laying floor finishes incl dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
S&F for Pressed steel frames of size 125 x 60mm for doors , windows and ventilators etc, with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed by Engineer-in-Charge.
S&F for Pressed steel frames of size 105 x 60mm for doors , windows and ventilators etc, with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed by Engineer-in-Charge.
M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in filling of pressed steel door frames and similer work etc incl necessary formwork complete all as specified and directed by Engineer-in-Charge.
S&F for Solid PVC Frame of size 50mm x 47mm for door made out of 5mm plain colour PVC Sheet reinforced with MS Square tube complete all as specified and directed by Engineer-in-Charge.
S&F for factory made 35mm thick 2nd class hardwood Plain, framed panelled shutters (any No of panels) with lock rail and panel of 12mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge.
S&F for 30mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc (without sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as per SSR-Part-I Section-8, Clause 8.24 (a) etc complete all as specified and directed by Engineer-in-Charge.
S&F for 30mm thick 2nd class hardwood glazed and skeleton shutters for windows, ventilators, etc. open rebated and prepared to receive glass, gauge etc (without sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as per SSR-Part-I Section-8, Clause 8.24 (b) etc complete all as specified and directed by Engineer-in-Charge.
S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC’C’ channel having a PVC sheet strip of 20mm width stuck in side with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, and bottom rail: on either side and as gap insert for top rail and bottom rail Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile and rail with suitable PVC sheet beading, and joined to gather with solvent cement, supplying and fixing in the frame at site complete all as specified and shown in drawing and directed by Engineer-in-Charge.
S&F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings, (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engineer-in-Charge.
S&F for Mild steel, plain, black sheet 0.80mm in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed by Engineer-in-Charge.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- foRMing to Fe.290.Gde-E-165 including dismantling old one complete all as specified and directed by Engineer-in-Charge.
S&F for 18/19mm Prelaminated particle board , exterior grade pre laminated one side with decorative choice lamination and other side balancing white lamination fixed with screws or nails to frame complete all as specified and directed by Engineer-in-Charge.
M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and finishing the surface fair and even ccomplete all as specified and directed by Engineer-in-Charge.
M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and finishing the surface fair and even incl taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.
M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 and finishing the surface fair and even incl taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.
M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:3 and finishing the surface fair and even incl taking down cement plaster on brick, concrete or ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.
M&L for preparing new plastered surfaces and applying two coats of cement base paint including priming plastered surfaces with alkali resistant complete all as specified and directed by Engineer-in-Charge.
M&L for prepararing old external surfaces of walls including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coats of cement base paint on walls complete all as specified and directed by Engineer-in-Charge.
M&L for preparing new plastered surfaces and applying two coats of distemper oil emulsion including priming plastered surfaces with alkali resistant primer complete all as specified and directed by Engineer-in-Charge.
M&L for Complete removal of existing treatment from walls, fins, chajja etc shall include brooming down or steel wire brushing, scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots and removing debris/ malba to low lying area out side of MOD land and applying 3 thick a layer of white water proof wall care putty on scrapped/uneven surfaces to match with the existing surfaces before application of primer/distemper and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by Engineer-in-Charge.
M&L for preparing new plastered surfaces and applying three coats of white wash on new plaster surfaces on ceilings complete all as specified and directed by Engineer-in-Charge.
M&L for preparing of old previously treated plastered surface of ceilings including cornices etc, and cleaning by brooming down and applying one coats of white wash on ceiling complete all as specified and directed by Engineer-in-Charge.
M&L for preparing of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zink cromium primering complete all as specified and directed by Engineer-in-Charge.
S&F for 100mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21, complete all as specified and directed by Engineer-in-Charge.
S&F for 150mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-Charge.
S&F for 150mm long mild steel barrel tower bolts complete all as specified and directed by Engineer-in-Charge.
S&F for 150mm long Aluminium handles cast type, anodised complete all as specified and directed by Engineer-in-Charge.
S&F for 150mm long mild steel pressed handle in any shape and fixed complete all as specified and directed by Engineer-in-Charge.
S&F for 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed by Engineer-in-Charge.
S&F for MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge.
S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by Engineer-in-Charge.
S&F for Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engineer-in-Charge.
M&L Sheet glass, ordinary quality 5mm thick and glazing with oil putty in square exc 0.5 sq. m in each pane, fixed in any position in wooden or steel frame complete all as specified and directed by Engineer-in-Charge.
S&F in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.
S&F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge.
S&F in repair angle cock / stop cock cast copper alloy, fancy type chromium plated, 15 mm dia of bore complete all as specified and directed by Engineer-in-Charge.
S&F in repair Stop valves, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for15 mm bore iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-Charge.
S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed by Engineer-in-Charge.
S & F in repair 10 ltr capacity PVC valveless , syphonic actoin type, flushing cistern, low level white, with inlet ball valve , float & handle including MS brackets complete all as specified and directed by Engineer-in-Charge.
M&L in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipeor union complete all as specified and directed by Engineer-in-Charge.
S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge.
S&F in repair Tubular towel rail 20mm dia D type 60 CM long between flanges, aluminium anodised complete all as specified and directed by Engineer-in-Charge.
S&F for harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed by Engineer-in-Charge.
S&F for steel grating doom 125mm dia with waste hole complete all as specified and directed by Engineer-in-Charge.
S&F in repair Vitreous China wash basin, white, flat back, size 550X400 including brackets, 32 mm dia waste coupling of PTMT (min weight 45gms) and 32 mm dia waste pipe complete all as specified and directed by Engineer-in-Charge.
S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests,traps, bends etc (excluding flushing cistern and flush pipe) fixed in repairs complete all as specified and directed by Engineer-in-Charge.
S&F in repair gun metal globe or gate valve 20mm bore with iron wheel head screwed both ends for iron pipe complete all as specified and directed by Engineer-in-Charge.
S&F 25 mm bore ,CPVC medium grade, with all fittings (like Elbow,Tee socket, GI pipe connecter, nipples, tank adapter etc) and fixed complete to walls/ceilings with soilid iron hooks (one hook per mtr) or laid in floors incl taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed by Engineer-in-Charge.
S&F 20 mm bore ,CPVC medium grade, with all fittings (like Elbow,Tee socket, GI pipe connecter, nipples, tank adapter etc) and fixed complete to walls/ceilings with soilid iron hooks (one hook per mtr) or laid in floors incl taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed by Engineer-in-Charge.
BLANK
S&F for 500 litres capacity rotational moulded, triple layer polythethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position on roofs including 20mm bore brass ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed incl dismantling existing unsv water tanks etc and removing to store complete all as specified and directed by Engineer-in-Charge.
S&F for PVC (SWR) pipes 110mm single socketed in any length with rubber ring joints fixed to walls with stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof (one clamp per mtr) incl demolition and breaking up drain pipe 100/75mm bore salt glazed stone ware/AC/PVC pipe complete all as specified and directed by Engineer-in-Charge.
S&F 110mm PVC (SWR) bends in any radius complete all as specified and directed by Engineer-in-Charge.
S&F 100mm PVC (SWR) vent cowl complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair sinks made of stainless steel sheet 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge.
S&F 110mm PVC (SWR) floor trap, plain with grating incl jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed by Engineer-in-Charge.
Taking down carefully serviceable light fittings / fans / geysers etc any type from site keeping safe custody or depositing in MES and refixing the same on completion of civil and E/& M works incl making necessary connection with new PVc insulated and overall sheated 3 core flexible copper conductor cable of size .50 sqmm from ceiling rose to connecting point and testing complete all as specified and directed by Engineer-in-Charge.
M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade cable with multistranded copper conducto(FRLSH) of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, fixed in wall, on roof with GI saddles GI screws, rawal plugs (concealed conduit in wall wiring) with all fittings including Tee, junction boxes and provision of pressed steel terminal box of suitable size with 3 mm thick hylam laminated white sheet cover for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC insulated unsheathed 1100 volts grade cable with multistranded coper conductor of size 1.5 Sq mm (Nominal area) complete all as specified and directed by Engineer-in-Charge for following (Color coding to be followed) :-
All as per item No 73 above but One light/fan point controlled by one switch.
All as per item No 73 above but One 3/5 pin socket 5 Amp on independent board with 2.5 sqmm wire with 2.5 sqmm earth wire.
All as per item No 73 above but One bell/buzzer point controlled by one bell push complete all as specified and directed by Engineer-in-Charge
All as per item No 73 above but One 3/5 pin socket outlet 5 Amp on same board, with 1.5sqmm wire with 1.5sqmm earth wire.
All as per item No 73 above butt 3 pins socket outlet 15 Amps independent with 4.0 sq mm incl contineous earthing with multistandred copper conductor PVC insulated unsheathed size 4.0 Sq mm. Note:- Cost making good disturbed surface below existing point wiring and cutting chases and making good of disturbed surfaces by cement & sand mortar (1:3) and surface finish as per adjustment surface conduit and all accessories as required for concealed point wiring as applicable shall be deemed to be included in the unit rate quoted against these items.
M&L for point wiring with multistranded copper conductor cable, PVC insulated and unsheathed size 1.5 sqmm (FRLSH) drawn in and incl PVC casing and caping with fixing accessories for one light /fan point controlled by one switch with pressed steel concealed terminal boxes covered with 3 mm thick laminated sheet incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly complete all as specified and directed by Engineer-in-Charge.
All as per item No 79 above but for one 3/5 pin socket 5 Amp on same board.with 1.5 sqmm wire with 1.5sqmm earth wire
All as per item No 79 above but for one 3/5 pin socket 5 Amp on independent board.with 1.5 sqmm wire with 1.5sqmm earth wire
All as per item No 79 above but for 3/5 pins socket outlet 15 Amps independent with 4.0 sqmm incl continous earthing with multistandred copper conductor PVC insulated unsheathed size 4.0 Sqmm.
M&L for switch piano type 5 Amps, single pole one way complete all as specified and directed by Engineer-in-Charge.
M & L for socket outlet 5 pin , 5 Amps flush type complete all as specified and directed by Engineer-in-Charge.
S&F bell push flush type switch complete all as specified and directed by Engineer-in-Charge.
M&L for switch piano, flush type 15 Amps single pole one way complete all as specified and directed by Engineer-in-Charge.
M&L for socket outlet 2 in 1, 3 pin, 5 and 15 Amps Flush type complete all as specified and directed by Engineer-in-Charge.
S & F stepped type electronic fan regulator flush type complete all as specified and directed by Engineer-in-Charge.
S&F for ceiling rose surface bakelite 65x50mm two to three terminals complete all as specified and directed by Engineer-in-Charge.
S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engineer-in-Charge.
Supply and fix 9w LED bulb, 230 volts complete all as specified and directed by Engineer-in-Charge.
S&F in replacement single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with plug top 20 amps with MCB SP 230 Volt 20 Amps and including taking down complete all as specified and directed by Engineer-in-Charge.
S & F LED Tube light self ballast batten 1 x 20 W, 230 V , 4 feet long extruded aluminium body with PC diffuser , integral isolated driver more than 120 degree wide light CCT 6500 k complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable and tubes with suitable size as directed and including taking down complete all as specified and directed by Engineer-in-Charge.
S & F energy efficient wall mounted LED bulk head 1 x 10 W, 230 V , made up of plastic housing & enclosed with cover IP65 and including taking down complete all as specified and directed by Engineer-in-Charge.
M&L for rewinding of burnt fan motor of 1200 mm sweep ceiling fan with super enamelled copper winding wire of suitable gauge as per existing make /model complete all as specified and directed by Engineer-in-Charge.
M&L for Sub main wiring alongwith earth wire, single core cable, 2x6 Sqmm, PVC insulated PVC unsheathed stranded FRLSH copper conductor cable in and including PVC concealed/ surface conduit of earth wire with 1x6 Sq mm copper cable fixed along with the sub main in PVC conduit and connecting to earth dolly and including taking down complete all as specified and directed by Engineer-in-Charge.
S&F SPN MCB distribution board 12 Way IP 42 Double door (Power shell) steel sheet Phosphatised powder coated with Din rail removable busbar shrouded neutral link with conditional short circuit rating of 5 KA and including taking down complete all as specified and directed by Engineer-in-Charge.
S&F Distribution board 6 way TP&N Double Door are fitted with Bus Bars, Neutral Links suitable for 415V, 50Hz, Blanking Plates, Suitable for TP/FP MCB and including Taking down complete all as specified and directed by Engineer-in-Charge.
S&F MCB TPN 63amp C Series Amps and including taking down complete all as specified and directed by Engineer-in-Charge.
S&F RCBOs for earth leakage,over load & short circuit protection 2 pole ,25 Amp rating, 300 mA capacity suitable for 240 Volts and including taking down existing U/S MCB/ RCCB complete all as specified and directed by Engineer-in-Charge.
S&F MCB SPN 40-63 Amps 240V incl all termnials, fitting etc. including taking down U/S complete all as specified and directed by Engineer-in-Charge.
S&F MCB SP 06 to 40 Amps 240V incl all termnials, fitting etc including taking down old U/S complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement capacitor, capacity 3.15 mfd complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing of Meter box sheet metal enclosure concealed type made of metal of size 32 x 25 x 14 cm having suitable incoming and outgoing openings for cables complete all as specified and directed by Engineer-in-Charge.
S&F Skylite recess mounting,36W, LED 2'x2' luminaire integrated electronic driver, optics diffused, complete including electrical connection with copper cable from ceiling rose to fittings of any type and any size complete all as specified and directed by Engineer-in-Charge.
S&F LED building secuity light 25 watt made up of pressure die cast aluminium housing with mid power LED as lightening source and PC cover having top opening inbuilt LED driver with IP66 protection and impact resistance of IK-07 complete including GI bracket with nut bolts, washers etc including electrical connection with copper cable from ceiling rose to fittings complete all as specified and directed by Engineer-in-Charge.
M&L for submain wiring with 2X4.0 SQMM+1X4.0SQMM Earth Wire single core PVC insulated FRLSH sheathed copper cable connecting to common earth dolly in and including heavy duty PVC Cascing & Caping all accessories complete all as specified and directed by Engineer-in-Charge. Note : Two run of submain wire shall be measured as one incl earth wire.
M&L for submain wiring with 2X6.0 SQMM+1X6.0SQMM Earth Wire single core PVC insulated FRLSH sheathed copper cable connecting to common earth dolly in and including heavy duty PVC Cascing & Caping all accessories complete all as specified and directed by Engineer-in-Charge. Note : Two run of submain wire shall be measured as one incl earth wire.
S&F Busbar Chamber for outdoor type 3.15 mm thick and suitable size ( 25"x25"x30") for set of 04 aluminium busbar 400 Amps rating ,supported with suitable size as per direction, each of heavy duty porcelin stand lock with suitable size of brass nut, bolts and washer with heat shrinkable PVC sleeving. The bar shall be colour coded (red, yellow and blue) for three phases and black for neutral, The Chamber shall be fixed 30 cm above the normal ground level complete with PCC foundation (1:2:4 ) type B2 using 40mm graded stone aggreagte complete all as specified and directed by Engineer-in-Charge.
S&F in repairs Distribution board 4 way TP&N Double Door are fitted with Bus Bars, Neutral Links suitable for 415V, 50Hz, Blanking Plates, Suitable for TP/FP MCB complete all as specified and directed by Engineer-in-Charge.
M & L for Earthing in repairs complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected by GI wire,4.0 mm dia as earth lead by means of nuts and bolt,thimbles, check nuts, washers of GI or steel including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20 mm graded stone aggregate,with fair finish,internal surface of concrete chamber shall be given internal dimension 300 mm x 300 mm x300 mm,15 mm thick plaster in CM 1:4,funnel with wire mesh,80 mm thick precast RCC pit cover 320 x 320 mm of RCC 1:2:4 Type B1 using 20 mm graded stone aggregate reinforced. XPM jally and charcoal,dust and common salt all as shown in electrical plate No 3 of MES SSR Part -1 and specified,provision of GI wire upto 7.5 metre long protected by 20 mm dia light grade pipe and watering pipe shall be 15 mm bore light grade ,excavation, earth work,connecting the earthing to an earthing test point or to main switch board as specified and testing on completion complete all as specified and directed by Engineer-in-Charge. Note: RCC pit cover shall be precast of RCC (1:2:4) type B1,80 mm thick reinforced with XPM weighting not less than 4 kg/Sqm in lieu of CI cover.
High Tech Metal India
Singh Associates
36SHRI RADHEY ASSOCIATES
laxmi enterprises
NAVEEN KUMAR TYAGI
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .