SPECIAL REPAIR TO QTR NO E273 TO E276 E277 TO E-280 OF 14 FAD UNDER GE NARANGI

Amount

Dismantling of plain or corrugated steel sheeting, any gauge or any thickness as in roof covering, wall cladding etc complete all as specified and directed.

Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, atmospheric classification category 3,four (4) coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as specified and as directed

Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, atmospheric classification category 3, four (4) coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as specified and as directed Note: To be executed for provison of ridges and hips, valley etc complete all as specifed and as directed

Supply and fix in repairs, suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 32 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement plain Board (E-Board Classic) in & including a grid of GI system duly suspended with 4mm dia GI wire hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed.

Material and labour for non skid coloured ceramic tiles 7 to 8mm thick, (square/rectangular) area of each tiles exc 0.06 sqm but not exc 0.11 sqm as in floors set and jointed in cement slurry and pointed in white cement mixed with colour pigment to match existing surfaces with 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

Material and labour for glazed coloured/printed ceramic tiles 450x300x7mm thick in vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry, pointed in white or coloured cement to match colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles over 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular )area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm on vertical surfaces as skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles over 10mm thick rendering in CM 1:4 complete all as specified and directed.

Dismantling of stone slabs and tiles of andy description or thickness as on platform, shelves, floors etc laid, bedded and pointed in any mortar .

Material and labour for mirror polishing 16-18 mm thick Granite (of any type) with high gloss finish machine cut, in floor etc laid over cement screed and jointed with grey cement slurry and pointing with white cement with admixture of pigment to match the shade of granite stone including grinding and necessary polishing and over 15 mm thick screed with 1:6 CM complete all as specified and directed.

Material and labour for mirror polishing 16-18 mm thick Granite (of any type) with high gloss finish machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry and pointing with white cement with admixture of pigment to match the shade of granite stone including grinding & necessary polishing and over 10 mm thick screed with 1:4 CM complete all as specified and directed.

Material and labour for machine cut kota stone slab flooring 18-20 mm thick over cement screed base 20 mm in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete mixed with pigment to match the shade of the slab including rubbing and polishing complete

Material and labour for machine cut Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with including 10mm thick rendering in CM 1:4 etc set and jointed in neat cement slurry

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm including builders hardware each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm each including builders hardware complete all as specified and as directed.

Supply and fix Pressed steel frames for doors of size 125mmx60mmx1.25mm with double rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed

Supply and fix Pressed steel frames for doors of size 105mmx60mmx1.25mm with single rebate including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed

Supply and fix powder coated three track aluminium sliding window with approved make of following extruded section of anodised glazed shutter as per Standard Engineering practices including all other accessories complete including 4.00 mm thick tinted glass panes, rubber beading, mosquito proofing, locking system etc. complete all as specified and as directed. (Refer Jindal Cat M-2014 ) Aluminium sections : 'A' series (i) Shutter bottom & top :- 37.50 x 15 x 1.3 mm thick (20690) (ii) Shutter interlock :- 37.50 x 23 x 1.3 mm thick (20689) (iii) Shutter side (Handle) :- 37.50 x 23 x 1.3 mm thick (20689) (iv) Frame bottom :- 75 x 26 x 1 mm thick (20671) (v) Frame top and sides :- 75 x 26 x 1 mm thick (20672)

Providing and fixing powder coated aluminium (minimum thicknesss of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make confirming to IS-733 and IS- 1285, fixed with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e at top, bottom and sides with required EPDM complete all as specified and directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws, locking system all complete all as specified and directed.

Supply and fix steel ventilators with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

Supply and fix factory made solid PVC door frame of size 50mm x 47mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.

Supply and fix factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specfication, drawing and complete all as specified and as directed.

Supply and fix 30 mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both side complete all as specified and as directed.

Supply and fix 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bar), edges of framing with plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and as directed.

Material and labour for 18-19 mm thick block boards, grade 2 quality, interior grade, decorative type with decorative lamination on both faces fixed with screws/nails to timber frame work all as specified and directed.

Supply and fix stain-less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples complete all as specified and as directed.

Supply and fix 100 mm size stainless steel butt hinges, complete all as specified and as directed.

Supply and fix 75 mm size aluminium butt hinges, complete all as specified and as directed.

Supply and fix 200 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 150 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 100 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 150 mm extruded aluminum alloy handles, fabricated type, anodized complete all as specified and as directed

Supply and fix 100 mm extruded aluminum alloy handles, fabricated type, anodized complete all as specified and as directed

Supply and fix 20 mm dia anodised aluminium tubular curtains rod complete all as specified and directed.

Supply and fix aluminium anodised brackets for 20 mm dia curtain rod complete all as specified and directed.

Supply and fix floor door stopper of aluminium alloy body and tongue, overall length of cover plate 100 mm anodised with hard drawn steel spring, fixed in floors complete all as specified and directed.

Supply and fix Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, 30 mm width of flap when open fixed to wooden frame or shutter any type with screw complete all as specified an directed.

Material and labour for 100 mm long hasp and staple, safety type, aluminium anodised with mildsteel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply and fix 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed.

Material and labour 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads sectional area not exceeding 3 sqcm all as specified and directed.

Material and labour 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads sectional area exceeding 13 sqcm but n exc 25 Sqcm all as specified and directed.

Supply and fix aluminium Wardrobe hooks (single) 50mm to 60mm complete all as specified and directed.

Supply and fix sheet glass 3.0 mm thick ordinary quality and glazing with oil putty/wooden beads in squares not exc. 0.50sqm in each pane complete all as specified and directed.(Make : Saint Gobain/Modiguard/Atul)

Supply and fix 4 mm thick figured glass pin head type and glazing with oil putty/wooden beads in squares not exc 0.5 sqm in each pane complete all as specified and directed (Make : Saint Gobain/Modiguard/Atul).

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for all as specified and as directed.

Demolition of plain cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of concrete exc 15 cm thickness as in sunken floor & also removing the debris to the out side of MD land complete all as specified and drected.

Material and labour for PCC 1:5:10 type E-2 (using 40mm graded stone aggregate) as in filling of sunken floors complete all as specified and directed.

Material and labour for 50 mm dia and 350 mm long medium grade GI pipe spouts with wire gauge on inside mouth to be fixed before water proofing treatment of sunken slabs by cleaning RCC slab surface floors and walls by wire brush and rendering 6 mm thick in CM 1:4 mixed with integral WPC on uneven surface to make it even. Fill it water and check for dampness and seepage, all junctions points of side walls where CI/GI pipe are passing shall be sealed with epoxy mortar. Apply two coats of polymer modified cementious water proofing coating of minimum thickness of 1 mm each layer as per manufacturers instructions on floor & walls (upto 100 mm above FFL) and spray coarse sand on surface when the second layer is still sticky. Apply 20 mm thick plaster in CM 1:4 mixed with integral WPC of approved make on floors and walls including rounding of corners and junctions stoping towareds spouts. All pipes laid in sunken portions shall be covered with 50 mm thick PCC 1:3:6 all around after painting with anti corrosive black japan paint on GI/CI pipes. Test the water proofed area by filling water at least 72 hours and tested for leakage/seepage for the entire satisfaction of GE. After above said treatment apply two coats of hot blown bitumen @ 1.5 Kg /Sqm for each coat and laying 50 micron black polythene film in floors complete all as specified and directed. (Note : If leakage/Seepage occured after filling water at least 72 hours, the above said treatment will be re-done completely)

Material and labour for water proofing treatment to RCC roof slab, including parapet comprising with the following of treatment/specification from bottom to top:- (i) Taking out old roof treatment of any and roughening the old concrete slab by picking, sweeping clean and washing down with water to remove dust etc and disposal of rubbish not exceeding 100 mtr distance from starting point. (ii) Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 with mixing of WPC and surface finished fare and smooth without using extra cement after applying a coat of cement slurry @ 3 kg/sqm for laying APP membrane. (iii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.25ltr /Sqm conforming to IS:3384-1986. (iv) APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) shall be applied over bituminous primer as specified above over by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. (v) Applying two coat of aluminium paint over the APP modified membrane @ 0.11Kg/sqm.

Material and labour RCC nominal mix type A1 (1:1.5:3) using 20 mm aggregate on slabs supported on walls , beams and columns in floors , roofs,landings,balconies, canopies deck slabs and in shelves and the likew complete all as specified and as directed.

Material and labour for plain cement concrete (1:3:6) type C1 (using 20 mm graded crushed stone aggregate) as in back filling in pressed steel door and window frame or fixing the hols fast etc complete all as specified and as directed.

Material and labour for form work on flat sides to soffits of suspended roof slabs not exceeding 200mm thick (Horizontal or sloping) rough finished surface of concrete all as specified and as directed.

Material and labour form work to edges of roughed finished surface of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizintal or sloping and similar work exc 10cm but n exc 20cm wide all as specified and as directed.

Material and labour for mild steel TMT bars 10 mm dia and over cut to length, bent to shape as required including cutting, bending cranking, hooking end and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and as directed

Material and labour for 25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregated) as in padding of roof top finishing even and fair to ascertain the proper slope with using WPC as per manufacturer instruction complete all as specified and as directed.

Material and labour for 25mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in sub base the surfaces even and rough complete all as specified and directed.

Material and labour for 75 mm thick, PCC 1:3:6, type C1 (using 20 mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide and 30 mm deep at every 2.4 mtrs interval filled with sealing compound grade 'A' etc complete all as specified and as direted.

Material and labour for 100 mm thick PCC 1:2:4, type B2 (using 40 mm graded crushed stone aggregate) as in path / paving / hard standing / floor and finished the surface even and smooth without using extra cement complete all as specified and as directed.

Taking up or down GI tubing 15 mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed.

Supply and fix GI pipe medium grade 15mm bore fixed to wall wall and ceiling or laying in floors, with all new fittings as required at site complete

Refixing old serviceable steel tubing 15 mm bore and connections in new or old position (walls, ceiling, floor etc) complete all as specified and directed.

Taking up or down GI tubing 20 mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed.

Supply and fix 20 mm bore galvanised iron tubing medium grade including all fittings in walls/ceilings or laid in floors including cutting complete all as specified and directed.

Refixing old serviceable steel tubing 20 mm bore and connections in new or old position (walls, ceiling, floor etc) complete all as specified and directed.

Material and labour for cutting chases, pinning in, making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintel etc and cutting chases for concealed water tubing or concealed conduit wiring etc n. exc. 10 cm width or girth complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided,complete all as specified.

Supply and fix mild Steel work as in roof trusses (framed) trussed, purlins, posts, crane gantries, rails and fastening and heavy bracket framing (Beam,tee, angle, channel or flat sections) including distance pieces cleats etc complete all as specified and as directed.

Supply and fix mild steel Framed work such as grills, gratings, angle iron, mild steel sheets, mild steel round bar, MS flat iron etc.. for chowkhats or doors shutters or windows etc with ends of bars shouldered and/or riveted, wlded or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

Dismantling weather boarding, any description, fixed in any position with screws complete all as specified and directed.

Material and labour for 2nd class hard wood weather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30mm laps complete all as specified and directed.

Supply hoisting and fix 500 ltrs rotational moulded polythene water storage water tanks two layered construction ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I duly ISI Marked, 20mm GI light grade over flow pipe approx length 1.5m long, 20mm GI medium grade pipe for wash out approx length 2.00 m duly plugged at one end shall be provided including dismantling the existing tank complete all as specified.

Supply and fix in repair chromium plated long body fancy type bib taps with wall flange, cast copper alloy with round operating knob screwed down high pressure, screwed for 15mm bore iron pipe complete all as specified and directed.

Supply and fix in repairs chromium plated wall mixer three in one system for mixing hot and cold water with hand shower screwed down for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repair 15mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

Supply and fix in repair stop valves/angle cocks, cast copper alloy concealed type long body with round operating knob chromium plated screwed down high pressure, screwed both ends for 15 mm bore iron pipe or brass ferrule.

Supply and fix in repair, 15mm bore dia of conceled stop valves cast copper alloy screwed down high presure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fix in repair 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and complete all as specified and directed.

Supply and fix in repair stainless steel sink with drainage board made of 1mm thick stainless steel sheet for kitchen with plugs, washers and pipe, cast iron cantilever brackets and connecting union to pipe overall size 940mm x 460 mm bowl size 405mm x 354mm x 203mm complete all as specified and directed.

Supply and fix in repair stainless steel kitchen rack made of 0.85 mm thick stainless steel sheet of size 610 mm x 760 mm x 254 mm fixed to wall with screws complete all as specified and directed.

Supply and fix in repair vitreous china squatting pan “Orissa pattern of size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including lime concrete bedding complete all as specified and directed.

Supply and fix in repairs vitreous china wash basin full pedestal type, white, flat back, minimum size 510x410x140mm excluding taps, waste, chain and plug and porcelain stopper etc complete all as specified and directed.

Supply and fix 40 mm dia chromium plated waste coupling complete all as specified and as directed.

Supply and fix in repairs 10 Litres, PVC valveless syphonic action type, flushing Cistern, low level, white inlet, ball valve, float, and brackets inclluding 32mm PVC flush pipe suitable for flushing cistern complete.

Supply and fix in repairs chromium plated tubular towel rail 20 mm dia 60 cm long including brackets complete all as specified and as directed.

Supply and fix in repair chromium plated soap dish fixed to wall with brass chromium plated screws complete all as specified and directed.

Supply and fix in repair 125 mm dia, chromium plated swivel type shower rose with 195 mm long chromium plated shower arm and wall flange suitable for fixing 15mm bore iron pipe all as specified and directed

Supply and fix 32/40mm dia flexible waste pipe for wash basin and kitchen sink complete all as specified and directed.

Supply and fix in repairs, 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix in repairs, 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix in repair 75 mm dia PVC (SWR) bends any radius complete all as specified and as directed.

Supply and fix in repair 110 mm dia PVC (SWR) bends any radius complete all as specified and as directed.

Supply and fix in repair 110 mm dia PVC (SWR) bends with access door any radius complete all as specified and as directed.

Supply and fix in repair 75 mm dia PVC (SWR) bends with access door any radius complete all as specified and as directed.

Supply and fix in repairs, 75 mm dia PVC(SWR) floor trap/nanhi trap, plain with grating including jointing with solvent cement complete all as specified and as directed

Supply and fix in repair 75mm dia PVC (SWR) junction single, (single T) equal or unequal provided with access door complete all as specifiec and as directed.

Supply and fix in repair 110 mm bore PVC (SWR) junction single, (single T)equal provided with access door complete all as specified and as directed.

Supply and fix in repairs, 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed

Supply and fix in repairs, 100 mm dia chromium plated grating doom complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillar including coping etc. complete all as specified and as directed.

Material and labour for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for brick work with sub class ‘B’ bricks, (locally available best quality) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and as directed.

Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

Material and labour 15mm thick rendering externally on brick or concrete surfaces in CM 1:4 mixed with liquid WPC @ 200 ml /50 kg by weight of cement or as per manufacturer instructions finished even and smooth without using extra cement complete all as specified and directed.(.Note : Water proofing compound to be measured and paid separately as "Supply only").

Material and labour for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surface finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 5mm thick in cement mortar 1:3 on fair faces of brick/concrete surfces as in ceiling finished even and smooth without using extra cement.

Supply only approved liquid water proofing compound.

Material and labour for preparation of newly plastered surface of walls and applying two coats of acrylic distemper over a coat of primer including 1 mm thick wall care putty complete all as specified and as directed.

Material and labour for complete removal of the existing treatment of wall and applying two coat of acrylic distemper over a coat of primer including 1 mm thick wall care putty complete all as specified and as directed.

Material and labour for preparation of newly plastered surface of ceiling and applying three coats of white wash including preparation complete all as specified and as directed.

Material and labour for preparation of new plastered surface of walls and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparation of old decorated wall surface and applying one coat of white wash complete all as specified and directed.

Material and labour for preparation of old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

Material and labour for preparation of new exterior cement/concrete surfaces & applying two coat of acrylic exterior weather coat paint (Weather proof paint with quality of dust guard, anti algal and anti fungal paint with minimum 05 years performance warranty, over a coat of approved primer of same manufacturer over a coat of 1 mm thick wall care putty complete all as specified and directed.

Material and labour for complete removal of the existing treatment of wall and applying two coat of acrylic exterior weather coat paint (Weather proof paint with quality of dust guard, anti algal and anti fungal paint with minimum 05 years performance warranty, over a coat of approved primer of same manufacturer over a coat of 1 mm thick wall care putty complete all as specified and directed.

Material and labour for preparation of new wood or wood based surface of any description n exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and as directed.

Material and labour for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

Material and labour for preparation of old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of new wood or wood based surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified and as directed.

Material and labour for preparation of steel surfaces n. exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.

Taking down carefully aluminium/ copper point wiring for light/fan/ socket/bell or power point incl. all fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. complete removing materials to store for keeping in safe custody site or handed over to contractor as schedule of credit and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

Taking down ceiling/exhaust/wall fan including connection wires carefully and deposit to MES store in safe custody complete all as specified and as directed.

Material and labour for point wiring with 1.5 sqmm, single core, PVC insulated and PVC unsheathed (FR-LSH) cable, 1100 volts grade IS-694 marked, with multistranded copper conductors and earth continuity wire with 1.5 Sqmm copper conductor cable (including connecting to earth dolly) laid/fixed with and including PVC rigid conduit on walls/ceiling ( concealed), with MS/PVC terminal boxes fixed flush with wall surface with 3mm thick masonite laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulators etc. including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly for one light or fan point controlled by one 5 Amp switch one way complete all as specified and as directed.

All as per item No 128 here-in-before but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables complete all as specified and as directed.

All as per item serial No 128 here-in-before but One 3 pin socket outlet 6 amps on the same board with other switches complete all as specified and as directed.

All as per item serial No 128 here-in-before but One socket outlet 3 pin 6 Amp on independent board complete all as specified and as directed.

All as per item serial No 128 here-in-before but One light point controlled by two switches complete all as specified and as directed.

All as per item serial No 128 here-in-before but with 2.5 Sqmm single core multistranded copper conductor cable for 6 pin 15 Amp socket outlet on independent board and earth continuity wire with 2.5 sqmm cable complete all as specified and as directed.

Supply and fix modular switch 6 amps 2 way 1module complete all as specified and as directed.

Supply and fix modular switch 1 way 6 amps 1module complete all as specified and as directed.

Supply and fix modular socket, 6 Amp 2/3 pin combined, 2 module complete all as specified and as directed.

Supply and fix modular switch 1 way 16 amp, 1 module complete all as specified and as directed.

Supply and fix modular socket, 16 Amp 2/3 pin combined, 2 module complete all as specified and as directed.

Supply and fix Buzzer, Ding Dong AC. 230 volts,single pole complete all as specified and as directed.

Supply and fix modular Bell push switch, 5 Amps 230 volt complete all as specified and as directed.

Supply and fix stepped type modular electronic fan regulator, two module size, flush type complete all as specified and as directed.

Supply and fix ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and as directed.

Supply and fix modular lamp holder ,PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

Supply and fix modular white cover plate with frame, 2 module complete all as specified and as directed.

Supply and fix modular white cover plate with frame, 4 module complete all as specified and as directed.

Supply and fix modular white cover plate with frame, 6 module complete all as specified and as directed.

Supply and fix modular white cover plate with frame, 8 module complete all as specified and as directed.

Supply and fix metal flush box 4 module for modular switches complete all as specified and as directed.

Supply and fix metal flush box 6 module for modular switches complete all as specified and as directed.

Supply and fix metal flush box 8 module for modular switches complete all as specified and as directed.

Supply and fix metal flush box 1/2 module for modular switches complete all as specified and as directed.

Supply and fixing in repair LED lights fitting 1x 20W, 220V, AC decorative batten type connecting up with three core 1.5 sqmm, flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC with driver holder and LED lamp including connecting up with three core 1.5 sqmm, flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing in repair LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core 1.5 Sqmm flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fix in repair/replacement MCCB DB IP-43 of sheet metal enclosure double door VTPN 4 way with 250 Amps rated copper bus bar 415 volt and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and as directed.

Supply and fix in repair/replacement MCB DB IP-43 of sheet metal enclosure double door SPN 8 way with 200 A rated bus bar and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate all as directed.

Supply and fix in repair/replacement MCCB four pole 100A, Icu 16KA, thermal magnetic, 415v AC complete all as specified and as directed.

Supply and fix in repair/replacement MCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,B-series marked fixing in DBs (DBs catered separately in this Schedule) complete all as specified and as directed.

Supply and fix in repair/replacement MCBs, SPN 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,B-series marked fixing in DBs (DBs catered separately in this Schedule) complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed complete all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep, 1400 rpm with blades, and frame and louvers complete all as specified and as directed.

Supply and fix exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and as directed.

Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 4 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion including demolition of old earthing all as specified and shown on plate No 3 of SSR Part-I 2009

Supply, fixing of storage type vertical wall mounted electric water heater with heating element 2KW of heating elements,230-volt outer ABS body should be shock resistant rust proof with with PUF insulation to retain hot water for longer duration, inner steel tank of capacity 25 ltrs and working pressure bar, BEE 5 star rated, Inner steel tank will be titanium enamel cated,Glass lining coating in tank with minimum warranty of 07 years and heating element of copper/incoloy will be with titanium enamel coating glass/lining coating with minimum warranty of 03 years and shall be corrosion/rust resistant. The water heater to be provided with protection of multiple layers of safety against high temperature and pressure with valve, thermostat, NRV and Auto cut switch. This shall include required numbers of heavy-duty SS connection pipes-304 grade of required dia & length and high temperature with standing capacity up to 100 0C including necessary number of bolts for grouting of geyser complete all as specified and directed.

Supply and fix in repair/replacement LED 60 W building secruity light made up of pressure die cast housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07 and suitable for dia upto 43 mm complete all as specified and directed.

Material and labour for building secruity light bracket made out of 40 mm bore light grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape for fixing street light luminaries all as directed, length of GI Pipe shall not be less than 2.0 mtrs complete all as specified and directed.

Material and labour for wiring with 2 runs of 6 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith single run of 6 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old wiring and type of conduit complete all as specified and directed. Note: 2 run of 6 Sqmm cable and 1 run of 6 Sqmm cable along with conduit altogether shall be measured as one unit.

Material and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 25 sqmm 4 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs and taking down etc, complete all as specified and as directed.

Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation or for shafts, wells cesspits,man holes etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and directed.

Removing excavated soil to distance not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point etc complete all as specified and as directed.

Supply and spreading clean dry river sand in cable trenches as in cable cushioning complete all as specified and as directed. (Note: Punned thickness shall be measured and paid)

Material and labour for Sub class ‘B’ old size well burnt brick laid flat in trenches over the cable for protection of LT cable complete all as specified and as directe

Supply and fix in repair steel tubes light grade galvanised 25 mm bore with all fittings and fixed complete to walls and ceilings and laid in floors complete all as directed.

Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 25mm bore including taking down complete all as specified and directed

Cutting existing steel tubing of 40mm for alterations or additions ccomplete all as specified and directed

M/s Talukdar Construction (BID ID -3365967)

M/s DAS AND CO (BID ID -3366512)

M/S Bharat Construction (BID ID -3366306)

M/S M Ahmed and Co. (BID ID -3366327)

KAKWANI BUILDERS (BID ID -3364986)

LAXMI CONSTRUCTION (BID ID -3365812)

Goswami Traders (BID ID -3365866)

VENUS TRADING CORPORATION (BID ID -3365192)

PARAS ENTERPRISE (BID ID -3365377)