Providing GI Shed Dog Kennel and Maintenance of Doctors Room at Melapalayam Santhai in ward No.50 Melapalayam ward Area

Amount

Earth work excavation and deposting on bank with an intial lead of 10m& initial liftm of 2m in hard siff clay , stiff black cotton , hard red earth shales , murram , gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil asper standard specification 20.B including refilling charges

Plain cement concrete 1:4:8 mix using 40mm metal ISS HBG metal including and const and conveyance of all materials and all labour charges etc completeas per std specification

Providing steel centering for sides and soffits of cement concrete works including necessary arrangements with strutting for plain surfaces with out props, With all cost and conveyance of materials and lab our at site ect ., Coplete as per standard specfication.

For Raft & Floor Beam

For Column

Supplying , fabricating and placing in it position of MS or RTS rod including the cost of steel & Binding wire, labour charges for cutting, bending, placing & tying with grills and conveyance etc., complete.asper standard specification.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers -

Providing steel centering for sides and soffits of cement concrete works including necessary arrangements with strutting for plain surfaces with out props, With all cost and conveyance of materials and lab our at site ect ., Coplete as per standard specfication.

Plain cement concrete 1:3:6 mix using 20mm metal ISS HBG metal including and const and conveyance of all materials and all labour charges etc completeas per std specification

Supply and filling of well gravel from approved quarry layers of not more than 30cm thick, well rammed, watered and consolidated complying with standard specifications etc., complete

Brick work in cement 1:5 mix using well burnt country bricks of size 83/4"x41/4"x23/4" including all cost and conveyance etc complete as per std specification

Special ceiling Plastering cement mortar 1: 3 mix 10mm thick including cost and conveyance all materials etc. complete as per std specification

Plastering with cement mortar 1: 5 mix 12mm thick including cost and conveyance all materials etc. complete asper standard specification.

Paving the floor with Vitrified Marbonite tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Paving the floor with ceramic tiles siratch proof design of size 305mm x 305mm x 6mm in Cement Mortar 1:3, 20mm thick with all cost and conveyance of materials etc., for flooring of self designed grooves and both way special colour tile of best quality and pointing with white cement using atthe rate of 0.40Kg / sq m including finishing thejoint neatly and pointing flush with tile surface etc complete

Dadooring the walls with glazed square tiles of 150mmx150mmx6mm of the following colour set in cement Mortar 1:2 10mm thick and pointed with white cement @ 0.4Kg/m2 in all floors as directed etc., complete complete complying with standard specification (S.D.261A)

Painting two coats with approved Interior and Exterior Emulsion paint over cement plastered wall surfaces including cleaning preparing the surface and quring etc complete asper standard specification.

Painting two coats with ready mixed approved paint over new steel surface including cost and conveyance all materials etc. complete asper standard specification.

Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter.

Supplying of following pipes and special including cost and conveyance all materials etc. complete

25mm PVC Pipe

25mm PVC Coupler

25mm PVC Elbow

25mm PVC Bend

25mm PVC Union

25mm PVC MTA

25mm PVC FTA

25mm PVC Tee

25mm PVC Shoe

25mm PVC Ball Valve

32mm PVC Pipe

32mm PVC Coupler

32mm PVC Elbow

32mm PVC Bend

32mm PVC Union

32mm PVC MTA

32mm PVC FTA

32mm PVC Tee

32mm PVC Shoe

32mm PVC Ball Valve

25 x 20mm Reducer

25 x 20mm Reducer TEE

25 x 20mm Reducer Elbow

PVC Adhesive (Solution) - 100 Grm

Shellac - 100 Grm

Thread Ball

Wooden Plug, Clamp and Screws

Brass Chromium Plated Screw Down Tap 15 / 12mm dia (Heavy Type)

110mm PVC Pipe

110mm PVC Coupler

110mm PVC TEE

110mm PVC bend

110mm PVC Elbow

110mm PVC Shoe

110mm PVC Y

110mm PVC Door Elbow

110mm Vent Cowl

Labour (Plumber: 1-Skilled, 1-Semi Skilled)

Errection of pipes and specials in to borwell and conneckion 1.00 HP compressor motar etc., complete as per standard specification

Providing and fixing 110mm dia PVC Rain water down fall pipe eith necessary specials with all cost and conveyance or material cost and all labourcharges etc, complete as per standard specification

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC / 12.5 liters capacity porcelain low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting

Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For electronic regulator). (SD 22)

Supply and fixing of 1200mm (48") A C ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp(S D 110)

Supply and fixing of 20W 4 Feet LED Fitting with LED

Supply and fixing of 30W LED Street Light Fitting with LED

Wiring with 2X1.5 sq mm (22/0.3) P V C insulated S C, unsheated Cu. Conductor of 1100 V grade in suitable P V C rigid pipe on wall and ceiling with P V C accessories 100X113mm TW switch box for 5 A3 pin non interlocking C S plug with painting of suitable colour with contineous earth wire connection of 14 SWG TC wire for open P V C plug point ( S D 36)

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

UPVC Door - Supplying and fixing of UPVC Door of casements type from the profile the size of outer frame 60mm x 58mm and shuttrer profile are reinforcement with GI 1mm 125 GSM and 100% Corrosion free the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber covered with all over teh edges of frame and shutter the shutter will be provided with espag multi power point locks and also it operates a handle. the corners and joints should be welded and cleaned. Radiations free pin headed plain or brown glass 4mm thick should be provided to the shutter and it should be provided to the shutter and it should not allowed leakage of water even at most ranging stroms and should have key lockable action. security protective hinges strong locking systems and as per size for arresting noise and energy loss. The connecting machanism between such and outer frame that enables opening of the window. The window should be fixed to to wall with 100 % packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work (PWD SOR 2020-21, P no : 71 SI No 247)

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 83mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Provision for Juncle Cleaning using JCB Vehicle including all cost and conveyance and all labour charges etc complete.

Supply and installation of Anutone (or) Euivalent Brand of Acoustical False Ceiling of subtex nubby, square edge, glass fibre core fully encapsulated ceiling tile of size 595 x 595 x 15mm having volume density 120 Kgs / m3, weight 1.8 / 2.4 / 3 kg / m2 which is suspended by using 0.3mm thick skelet trelis T15 metal grid system.Skelet trelis T15 metal grid system of 600 x 600mm module includes skelet WA15 W30 wall angle with unequal flanges of 15 / 19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the skelet MT15 W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Skelet CT15 W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally, the skelet CT15W06 CrossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15W12 CrossT in direction parallel to the Main T15 to result in 600 x 600mm module. The subtex nubby square edge of size 595 x 595 x 15mm shall be placed into the grid size of 600 x 600mm. Ensure arrow marks behind the tiles are oriented in one direction to achieve uniform shade. The systems to achieve noise reduction coefficient not less than 0.9 NRC, so as to have an neat appearance as directed by the department offices. The cost includes, cost of material, cost of labour, scaffolding, transportation, conveyance, etc. complying to standard specication.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

SUPPLY & INSTALLATION OF 2.0 TR Split Type AIR-CONDITIONER UNIT WITH COPPER COIL with 5 Star Rated Inverter (Carrier / Voltas / O General/ Equivalent) Instalation charges, loading and unloading etc..,

Ryan Engineering (BID ID -1283064)