Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹77.6 L
EMD Value
₹1.6 L
Closing Date
11 Feb 2026, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
WA SECTION
19 conditions · 3 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. Advance Correction Slip No.1(Rly. Board letter No.2022/CE-I/CT/GCC-2022/Policy date 14.07.2022.) PLEASE ATTACH COPY OF AUDITED BALANCE SHEET.
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. Advance Correction Slip No.1(Rly. Board letter No.2022/CE-I/CT/GCC-2022/Policy date 14.07.2022.) PLEASE ATTACH COPY OF ANNEXURE VI-B.(Proforma is available in document).
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components.
In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity.
For tenders having advertised value more than Rs. 20 crore wherein eligibility criteria includes bid capacity also, the tenderer will be qualified only if its available bid capacity is equal to or more than the total bid value of the present tender. Annexure VI of GCC April 2022 and Advance Correction Slip No.1(Rly. Board letter No.2022/CE-I/CT/GCC-2022/Policy date 14.07.2022.)
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- Any Civil Engineering Work
69 conditions · 6 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
CPWD DSR-2021 (Delhi Schedule of Rates) and CPWD Specifications- 2019 (or latest) shall be used for all works related to Building Works, Road Works and Horticulture works and other Miscellaneous works with effect from 16.01.2023 with latest Correction Slips issued from time to time by CPWD.
Signature on Receipts for Amount.
Every receipt for money which may become payable or for any security which may become transferable to the Contractors under these presents, shall, if signed in the partnership name by anyone of the partners of a Contractor's firm be a good and sufficient discharge to the Railway in respect of the moneys or security purported to be acknowledged thereby and in the event of death of any of the Contractor, partners during the pendency of the contract, it is hereby expressly agreed that every receipt by anyone of the surviving Contractor partners shall if so signed as aforesaid be good and sufficient discharge as aforesaid provided that nothing in this Clause contained shall be deemed to prejudice or effect any claim which the Railway may hereafter have against the legal representative of any Contractor partner so dying for or in respect to any breach of any of the conditions of the contract, provided also that nothing in this clause contained shall be deemed to prejudice or effect the respective rights or obligations of the Contractor partners and of the legal representatives of any deceased contractor partners interse. (GCC April 2022 para 53.)
Applicability of rules for this tender
GCC-April 2022 with upto date correction slip.
Relevant IS-CODES AND RAILWAY CODES AND MANUALS.
In these Special Conditions of Contract the following terms shall have the meaning hereby assigned to them except where the context otherwise requires.
(a)"General Condition of Contract" shall mean General Conditions of Contract-April 2022 as contained in Western Railway, Engineering Department "Indian Railways Unified standard specifications (works and materials)Vol-I &II".
"Specifications" shall mean the Specifications for Materials and Works of the Railway as specified under the authority of the Ministry of Railways or Chief Engineer or as amplified, added to or superseded by special specifications if any, appended to the Tender Forms. (GCC April 2022 Part I para I Instructions to tenderers (ITT).)
Standard Schedule of Rates (SSOR) shall mean the schedule of Rates adopted by the Railway, which includes- 1."Unified Standard Schedule of Rates of the Railway (USSOR)" i.e. the Standard Schedule of Rates of the Railway issued under the authority of the Chief Engineer from time to time, updated with correction slips issued up to date of inviting tender or as otherwise specified in the tender documents; 2. "Delhi Schedule Of Rates (DSR)" i.e. the Standard Schedule of Rates published by Director General/ Central Public Works Department, Government of India, New Delhi, as adopted and modified by the Railway under the authority of the Chief Engineer from time to time, updated with correction slips issued up to date of inviting tender or as otherwise specified in the tender documents.
"If any dispute arises between the parties with respect to this agreement any application or suit shall be instituted only in the; court with the local limits or whose Jurisdiction, the Western Railway's Divisional Headquarters office is situated and both the parties shall be bound by this clause. (Head quarters letter no. CE-Circular No. 11/No. W/623/5/ARB/1 dt. 26.04.04)
Nagda-Bhopal Section- Improvement to TRD Depot Building (3 NOS.), SP (3 NOS.), SSP (10 NOS.) and TSS (5 NOS.) work under jurisdiction DEN (South) Section in connection with work of Reconstruction of old Dilapidated TSS, SP, SSP & TRD depots buildings.
RTM-2025-26-141~WR
RTM-2025-26-141
Open
Works - General
8 Months
Ratlam, Madhya Pradesh
₹0
₹1.6 L
11 Feb 2026
15 Jan 2026
28 Jan 2026
69 items across 1 schedule · ₹1,14,10,266.02 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 175 | 177.5 | 31,062.5 |
| 2 | Ordinary rock | cum | 50 | 498.9 | 24,945 |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum | 400 | 196 | 78,400 |
| 4 | All kinds of soil | cum | 50 | 126.8 | 6,340 |
| 5 | 1:1 1/2:3 (1 Cement: 1 1/2 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 20 | 8,340.85 | 1,66,817 |
| 6 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 10 | 7,878.5 | 78,785 |
| 7 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 150 | 7,294.7 | 10,94,205 |
| 8 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 20 | 9,045.75 | 1,80,915 |
| 9 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 5 | 10,852.95 | 54,264.75 |
| 10 | cum | 10 | 11,505.5 | 1,15,055 | |
| 11 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 150 | 392.15 | 58,822.5 |
| 12 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. | Sqm | 190 | 842.5 | 1,60,075 |
| 13 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 50 | 927.25 | 46,362.5 |
| 14 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm | 180 | 736.4 | 1,32,552 |
| 15 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 100 | 961.3 | 96,130 |
| 16 | Weather shade, Chajjas, corbels etc., including edges | Sqm | 100 | 951.1 | 95,110 |
| 17 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 1000 | 107.85 | 1,07,850 |
| 18 | Cement Mortar 1:6 (1 cement : 6 coarse sand). | cum | 40 | 6,295.15 | 2,51,806 |
| 19 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 20 | 9,333.45 | 1,86,669 |
| 20 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 250 | 1,267.95 | 3,16,987.5 |
| 21 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in-Charge. | Metre | 25 | 492.7 | 12,317.5 |
| 22 | 30 mm thick plain PVC door shutters | Sqm | 8 | 3,182.95 | 25,463.6 |
| 23 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 4000 | 117.35 | 4,69,400 |
| 24 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 800 | 133.7 | 1,06,960 |
| 25 | Using flats 30x6 mm for diagonal braces and central cross piece | Sqm | 90 | 5,563.75 | 5,00,737.5 |
| 26 | 80x1.25 mm M.S. laths with 1.25 mm thick top cover | Sqm | 40 | 3,653.2 | 1,46,128 |
| 27 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 400 | 172.6 | 69,040 |
| 28 | Acid and alkali resistant tile | Sqm | 100 | 1,738.15 | 1,73,815 |
| 29 | 25 mm thick | Sqm | 835 | 1,948.25 | 16,26,788.75 |
| 30 | White sand stone | Sqm | 250 | 1,342.65 | 3,35,662.5 |
| 31 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | Sqm | 200 | 1,096.55 | 2,19,310 |
| 32 | Size of Tile 600x600 mm | Sqm | 250 | 1,553.45 | 3,88,362.5 |
| 33 | 75 mm diameter | Metre | 30 | 248.8 | 7,464 |
| 34 | 110 mm diameter | Metre | 50 | 377.4 | 18,870 |
| 35 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 1000 | 738.65 | 7,38,650 |
| 36 | Ridges plain (500 - 600mm) | Metre | 100 | 532.35 | 53,235 |
| 37 | 1:6 (1 cement: 6 fine sand) | Sqm | 300 | 383 | 1,14,900 |
| 38 | 18 mm cement plaster in two coats under layer 12 mm thick cement plaster1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). | Sqm | 2000 | 518.55 | 10,37,100 |
| 39 | 1:3 (1 cement : 3 fine sand) | Sqm | 200 | 300.45 | 60,090 |
| 40 | New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. | Sqm | 4500 | 181.25 | 8,15,625 |
| 41 | Two or more coats on new work | Sqm | 1160 | 155.9 | 1,80,844 |
| 42 | Two or more coats on new work | Sqm | 1500 | 146.8 | 2,20,200 |
| 43 | Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows. | Kg | 150 | 120.75 | 18,112.5 |
| 44 | 3 mm thick | Sqm | 278.17 | 537.45 | 1,49,502.47 |
| 45 | Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer- in-charge. | cum | 15 | 851.5 | 12,772.5 |
| 46 | In cement mortar | cum | 5 | 2,060.2 | 10,301 |
| 47 | Of area 3 sq. metres and below | Each | 10 | 367.2 | 3,672 |
| 48 | Channels, angles, tees and flats | Kg | 150 | 2.3 | 345 |
| 49 | For thickness of tiles 10 mm to 25 mm | Sqm | 50 | 73.4 | 3,670 |
| 50 | Asbestos Cement sheet | Sqm | 100 | 77.3 | 7,730 |
| 51 | Moorum | cum | 400 | 768.25 | 3,07,300 |
| 52 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. | Sqm | 100 | 972 | 97,200 |
| 53 | One urinal basin with 5 litre white P.V.C. automatic flushing cistern | Each | 6 | 6,258.75 | 37,552.5 |
| 54 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | Each | 3 | 2,648.85 | 7,946.55 |
| 55 | Orissa pattern W.C. pan 580x440 mm | Each | 6 | 426.8 | 2,560.8 |
| 56 | 10 litre capacity - White | Each | 6 | 1,190.65 | 7,143.9 |
| 57 | Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. | Each | 6 | 142.85 | 857.1 |
| 58 | 32 mm dia | Each | 10 | 103.9 | 1,039 |
| 59 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | 3 | 1,607.95 | 4,823.85 |
| 60 | Rectangular shape 453x357 mm | Each | 3 | 1,361.8 | 4,085.4 |
| 61 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. | Each | 3 | 231.95 | 695.85 |
| 62 | 20 mm nominal dia Pipes | Metre | 50 | 335 | 16,750 |
| 63 | 25 mm nominal dia Pipes | Metre | 50 | 401.55 | 20,077.5 |
| 64 | 20 mm nominal dia Pipes | Metre | 50 | 274.3 | 13,715 |
| 65 | 25 mm nominal dia Pipes | Metre | 50 | 355.4 | 17,770 |
| 66 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms | Each | 10 | 156.9 | 1,569 |
| 67 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 30 | 530.9 | 15,927 |
| 68 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 40 | 634.45 | 25,378 |
| 69 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | Sqm | 15 | 1,176.8 | 17,652 |
| Schedule total | ₹1,14,10,266.02 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .