Special repairs to Bldg No P-92, NP-15, lightening protection, earthling pits of certain bldg and overhead line to UG Cable at Mil Stn Bhusawal under GE (S) Ahmednagar

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concretebut excluding ashlar facings, dressed stonework and precast concrete articles all as specified and as directed.

Taking down chowkats or frames, area n.exc 1.5 Sqm each (without taking off shutters from frames) all as specified and as directed.

Taking down of chowkats or frames, area exc 1.5 Sqm but n.exc 4.5 Sqm each (without taking off shutters from the frames) all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings including ridges complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar all as specified and as directed

Excavation in trenches, n exc 1.50m wide and n exc 1.50m in depth; for foundations, etc. or for manholes etc not exc 10 Sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil all as specified and as directed.

Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc 25cm thick all as specified and as directed.

Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and as directed.

M&L for plain cement concrete, 1:3:6, type C-1, using 20 mm graded stone aggregates as in bed blocks for fixing hold fasts and similar items including necessary form work complete all as specified and as directed.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean redius, built in cement mortar 1:6 complete all as specified and as directed.

S&F 35mm thick factory made, second class, hard wood (Kail) glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (with out sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete, all as specified and as directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/Sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as speified and as directed

S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/Sqmm, modulus of elasticity 850 N/Sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws, all as specified and as directed.

Forming jambs, etc. to openings including cutting, toothing and properly bonding into old work, also facing, jointing and pointing/plastering to match existing work, complete all as specified and as directed

S&F 100 mm size butt hinges, medium weight, cold rolled mild steel, and fixed all as specified and as directed.

S&F aluminium anodised barrel tower bolts, 200mm long all as specified and as directed.

S&F 125 mm size aluminium handles, cast type, anodised complete all as specified and as directed.

S&F 300mm aluminium alloy anodised sliding door bolts with hasp and staple and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed complete all as specified and as directed.

M&L for stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperature 1.40 mm, fixed with tinned tacks or stainless steel wire staples to steel frame complete all as specified and as directed.

S&F mild steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and as directed.

S&F mild steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded all as specified and as directed.

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or rivetted or forged into spikes, framed guard bars and similar work conforming to Fe 290. Gde-165 complete all as specified and as directed.

S&F rolled mild steel work as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails fixed with anglecleats or other connecting plates conforming to Fe 290. Gde-165 complete all as specified and as directed.

S&F mild steel work as in bands, straps, supports or stays for rain water, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, plate washers and similar small articles conforming to Fe 290 Gde E 165 complete all as specified and as directed.

S&F mild steel hand rails, half round or other section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bars for doors, balusters, nosing to steps including embedding in concrete and screwing etc wind ties for roof including securing bolts, nosing, posts/struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets including all necessary drilling holes, notching for wire etc conforming to Fe 290. Gde-165 complete all as specified and as directed.

Fixing only mild steel hand rails, half round or other section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bars for doors, balusters, nosing to steps including embedding in concrete and screwing etc wind ties for roof including securing bolts, nosing, posts/struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets including all necessary drilling holes, notching for wire etc complete all as specified and as directed.

S&F prepainted galvalume aluminum zinc coating GI based corrugated steel sheets 0.50mm thick of colour as approved by GE, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.

S&F prepainted galvalume aluminum zinc coating GI based plain steel sheets 0.50mm thick of colour as approved by GE, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.

S&F anodised aluminium snap grid frame work for false ceiling of grid size 605mm x 605mm, suspended to roof members including 6mm dia GI hangers (upto 1200mm Average length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40 x 3mm size, 60mm long and expansion hold fasteners 12.5mm dia, 40mm long with and including 4mm thick non asbestos designer cement building boards fixed to aluminium snap grid ceiling with screws and applying two coats of distemper oil emulsion over a coat of chack whiting including preparation of new ceiling surfaces complete all as specified and as directed

M&L for 20-25mm thick machine cut kota stone slab flooring laid over and including 20mm thick screed bed in cement mortar 1:6, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete complete all as specified and as directed.

M&L for 10mm thick rendering in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces, finished even and smooth with sagol finish complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished surfaces even and fair all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces finished surfaces even and fair all as specified and as directed.

Complete removal of existing treatment from old decorated plastered or unplastered walls including cornices, pillars, filling up undulations and applying 1.5mm thick(average)wall putty on entire surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whiting all as specified and as directed.

M&L for preparation of old plastered or unplastered surfaces of walls and applying one coat of oil bound distemper all as specified and as directed.

M&L for preparation of new plastered surfaces of walls applying two coats of cement base paint over a coat of primer all as specified and as directed

M&L for preparation of old plastered or unplastered surfaces of walls applying one coat of cement base paint all as specified and as directed

M&L for 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane all as specified and as directed

M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old treating small articles such as stops, covers, gully, gratings, holdfasts, ends of posts, backs of chowkats, etc., area n exc 0.1 sq. m each and treated with tar or coal tar black paint all as specified and as directed

M&L for sanding newly tarred or painted surfaces with clean sharp sand all as specified and as directed

M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified and as directed

M&L for preparion of old steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and as directed

M&L for preparion of new steel surfaces of any description n exc 10cm width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide all as specified and as directed

M&L for preparion of old steel surfaces of any description n exc 10cm width or girth when unconnected with other painting or when painted in a different tint and applying one coat of synthetic enamel paint all as specified and as directed

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including fitting and fixture such as switches, ceilling roses, pendants, regulators, sockets etc, and making good disturbed surfaces of walls, floors etc complete all as specified and as directed.

M & L for point wiring complete on surface of wall (open) type with two runs of 1.5 sqmm for phase and neutral, single core, multistranded copper conductor cable of 1100 Volts grade,conforming to IS-694 1990, PVC insulated and unsheathed , FRLS cable drawn through and including PVC casing and caping (ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, coloumns/ beams alongwith 1.5 Sqmm copper conductor cable (multistranded) PVC insulated and unsheathed FRLS cable as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC folding boards for mounting switches, sockets, fan Regulators, accessories etc as specified and directed for one light point or one fan point controlled by one, one way switch NOTE: 1.Proper colour coding shall be adopted for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black) 2. All points shall be earthed up to fixtures i.e holders,tube lights,all lights,ceiling lights,bulkhead lights,bldg security lights etc.

All as per Item No 49 but for one switch socket out let 3 pin, 5 Amps point on independent board.

All as per Item No 49 but for one switch socket outlet 3 pin, 5 Amps point with other switches on same board.

All as per item No 49 but wiring with 4 Sqmm multi stranded two run copper conductor cable and 4 Sqmm single core cable for earth continuty for one socket out let, 3 pin, 16 Amps power point on independent board.

M&L for sub main wiring with 2 runs of 4 sqmm, single core, PVC insulated & unsheathed FRLS cable conforming to IS-694, 1100 volts with copper conductor, multi stranded drawn in and including suitable size heavy grade casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4 sqmm single core PVC insulated & unsheathed FRLS copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduit complete all as specified and as directed. NOTE: 1.Proper colour coding shall adopted for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black) 2.Three runs of 4 sq.mm cable and one run of PVC casing & caping shall be measured as one unit.

S&F switch piano, flush type, single pole, one way, 6 Amps complete all as specified and as directed.

S&F switch socket combination, 2 in 1 pin, 6 Amps, flush type 230 volts, AC complete with box all as specified and as directed.

S&F switch socket combination, 2/3 pin, 6 Amps and 16 Amps, flush type 230 volts, AC complete with box all as specified & as directed.

S&F ceiling rose surface bakelite, 50 mm dia, 2 to 3 terminals, PVC/Polycarbonate isolated body, 5 amps complete all as specified and as directed.

S&F in repair, LED light fitting, 25W for building security lights with pressure die cast aluminum luminaire with high power LED and IP 65 protection and including mounting GI bracket made out 32 mm dia GI pipe light grade 1.2 mtr long bent to shape as required with flat iron clamps, nuts, bolts etc complete all as specified and as directed.

S&F in repair, LED lights fitting 1x20 Watt, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size of ceiling rose complete all as specified and directed.

S&F in repairs, sheet metal enclosures vertical DB, double door (VTPN) factory made having provision for FP MCCB upto 125 Amp as incomer, 415 volts, three phase and neutra,l 4 way with 200 amps rated bus bar, complete all as specified and directed.

S&F in repairs, sheet metal enclosure single pole & neutral for 240 volts, 8 way with 200 Amp rated bus bar, flush /surface mounting double door complete all as specified and as directed.

S&F in repairs, MCB single pole, 240 volt, 6 to 32 Amps, 10 KA, 'C' curve upto 40A complete all as specified and as directed.

S&F in repairs, MCB single pole and neutral, 240 volt, 40 amps, 10 KA complete all as specified and as directed.

S&F in repairs, MCB, 100 Amps, 4 pole , 415 Volt , 25 KA complete all as specified and as directed.

S&F in repairs, trim plus LED square aesthetically designed recessed mounted panel in a light weight plastic body 22W LED 6000K (size 195mmx195mm ) including connections from ceiling rose to light fittings complete all as specified and directed. Make : Havells cat No LHEBGAP7IZ1W022 or equivalent model of make Philips /Crompton/ Halonix/ Century LED/ Wipro/GE/Luker

S&F in repairs, capacitor of ceiling fans having capacity 2.5 mfd, 240 volt, 50 Hz, PCB oil filled type all as specified and as directed.

S&F in repairs, electronic dimmers, 450W, 250V flush type on the existing phenolic laminated sheet etc complete all as specified and as directed.

S&F galvanised iron strips 32 x 6 mm for main earthing lead,buried directly in ground of fixed on wall with clamps nut bolts etc complete all as specified and as directed.

S&F aluminium strip 25 x 3 mm with size , laid alongwith the AC sheet roof and fixing to wall etc complete with suitable aluminium saddles and fixing with screws complete all as specified and as directed.

S&F single pointed air termination copper rod 12 mm dia, 300 mm long duly supported and fixed with GI light grade 25 mm dia pipe 0.30 m long with suitable clamp and mild steel base plate of size 150mm x 150mm x 4 mm with GI socket by 25 mm dia including provision of PCC 1:2:4 type B 1 using 20 mm graded aggregate bed block of size 30cmx30cmx15 cm all as specified and as directed.

S&F terminal box made of phosporous bronze of size 75x75x25 mm complete, drilled, screwed including 3 Nos. 8 mm dia 25 mm long hexagonal head screw complete all as specified and as directed.

M&L for repairs to existing earthing pit chamber with PCC 1:2:4, type B1 in cover, including mild steel handle and wire mesh funnel and including 15mm thick external plaster in cement mortar 1:4, finished fair complete all as specified and as directed.

M&L in repairs, earthing complete with galvanised steel earth plate electrode of size 600mmx600mmx6mm thick buried directly in ground vertically to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below ground level connected to galvanized iron earth strip 32x6 mm by means of bolts, nuts, washers and check nuts made out of galvanised iron and connected to main switch/control board upto 7.5 m away from the earth electrode including excavation earth woek, PCC chamber, RCC cover slab char coal, watering pipe, wire mesh lugs, earth lead protection pipe 40 mm bore, medium grade, 7.5 m long as applicable and as per plate No. 3 of SSR 2009 and all as specified and as direted.:- (a) Excavation and earth work in any type of soil. (b) Drilling of holes in electrode. (c) PCC pit in cement concrete (1:2:4) type B-1 (d) 40 mm thick Pre-cast RCC (1:2:4) type B-1 cover reinforced with 8 mm # @ 150 mm c/c with suitable handle. (e) Funnel with watering pipe of GI 20 mm nominal bore medium grade & copper lug etc. (f) 40 mm nominal bore medium grade GI protection pipe 7.5 m long for protection of earthing lead. (g) Requsite quantity of charcoal and common salt. (h) Connection to earthing test point and testing on completion.

Dismantling unserviceable ACSR conductor any size including copper / aluminium binding wire complete all as specified and as directed.

Taking down GI guarding with cradle complete all as specified and as directed.

Dismantling of unserviceable existing cross arms of mild steel channel or angle sections, nut, bolt and washer etc from pole/ 2 pole/ 4 pole structure of any size complete all as specified and as directed.

Dismantling of existing pin / shackle / loop / disc / HT/LT insulator etc from 2 pole / 4 pole structure of any size complete all as specified and as directed.

Dismantling concrete poles/ struts, any size all as specified and as directed.

S&F junction box of size 255 mm x 205 mm x 112 mm with cable glands, comprising of MCB SPN, 10 Amp, 240volts, mounted on din rails with and including fixing clamps made out of MS flat iron 40 x 3mm thick with nut bolts and terminal block suitable for LT UG cables, fixing on wall/poles with MS clamps and connecting with cable all as specified and as directed.

M&L for plain cement concrete (1:2:4) type B-1 (using 20 mm graded crushed stone aggregates) as in coping of poles including necessary formwork complete all as specified and as directed.

M&L for installing, testing and commissioning feeder pillar box, factory made of size 600mm x 600mm, weather/vermin proof, outdoor type from CPRI approved panel Board, made out of 3mm thick CRCA sheet, duly powder coated, paint with inner shutter & outer, double door with locking arrangement both side openable fixed on 40mm x 40mm x 5mm MS angle iron frame, fixed 45cm high from ground level & 30cm below the ground grounted in & incl PCC 1:3:6 type C1 (using 20mm graded stone aggregates) including necessay outgoing cable connections, cable glands, thimbles & cable termination connector strip of required and comprising of following all as specified and as directed. a) Incoming MCCB 200 Amps, 4 pole 415 volt, breaking capacity 25 KA -01 No b) Outgoing MCCB 160 Amps 4 poles 415 Volt -02 Nos breaking cap 25 KA with copper busbar capacity 150 rated (RYB and neutral colour coding)

S&F in repairs, XLPE insulated, armoured, LT heavy duty electric cable with aluminium conductor,1100 volts grade,cross sectional area 16 sqmm, 4 core cable including laying, connecting and testing complete all as specified and as directed.

S&F XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured electric power multistranded heavy duty cable of size 4 core, 16 sq mm with aluminium conductor, 1100 volt grade, laid in trenches or passing through pipes/ducts including testing complete all as specified and directed.

All as per item No 83 above but cross sectional area of 3.5 core, 50sq mm complete all as specified and as directed.

S&F PVC insulated and FR PVC round sheathed, copper conductor (Flexible) industrial cables 2 core, 1.5 Sqmm, 1100 Volts conforming to IS:694 for connection from Junction box of pole to street light connection and cable laid in suitable size of conduit complete all as specified and as directed.

M&L for dry river sand in trenches for cushioning of underground cable with a layer of fine sand 8 cms thick before laying of cables and 15 cms thick (punned to 10cm thich) after laying of cable including spreading, levelling, hand punning complete all as specified and as directed. Note:Punned thickness will be measured and paid.

Supply and laying well burnt, old size, sub class ‘B’ bricks locally available best quality, laid dry in trenches for protection of underground cable, laid flat with length for brick perpendicular to length of cable complete all as specified and as directed.

S&F 50 mm bore Galvanised iron tubes, light grade for cable protection, laid in trenches or for fixing to pole or wall complete all as specified and directed.

Bhirud Electric Stores