REPAIR MAINTENANCE OF PLUMBING, SANITARY FITTING, WATER SUPPLY UNDER GE (W) MATHURA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed by Engineer-in-charge.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6) complete all as specified and directed by Engineer-in-charge.

M&L for glazed ceramic tiles (coloured) 450mm x 350mm x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering in cement & sand mortar (1:4) including necesary cutting as per site requirment complete all as specified and directed by Engineer-in-charge.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6) complete all as specified and directed by Engineer-in-charge.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering in cement & sand mortar (1:4) complete all as specified and directed by Engineer-in-charge.

Demolition of cement concrete ( unreinforced ) in ground floors and pavings not exceeding 15 cm thick above or below ground level complete all as specified and directed.

M&L for Plain cement concrete type B1 (1:2:4), using 20 mm graded crushed stone aggregate,40 mm thick , as in floor and finished even and smooth using extra cement laid in alternate bay and joints filled with and including bituminous compound grade 'A' complete all as specified and directed.

Taking down eaves gutters and rain water pipes, soil waste and vent pipe ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., including cleaning for refixing ( measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.

S&F 100mm CI pipes soil, waste and vent pipe centrifuglly spun cast in any length with or without ears, with cement joints fixed to wall including applying a coat of black japaned paint on outer surface of pipes complete all as specified and directed.

S&F 100mm CI bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 100mm CI bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and directed.

S&F 100mm CI Branch pieces, single T (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F 100mm CI Branch pieces, single T (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed.

S&F 75mm CI pipes soil, waste and vent pipe centrifuglly spun cast in any length with or without ears, with cement joints fixed to wall including applying a coat of black japaned paint on outer surface of pipes complete all as specified and directed.

S&F 75mm CI bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 75mm CI bends (any radius), diminishing pieces or tapers (larger bore measured) oval access door complete all as specified and directed.

S&F 75mm CI Branch pieces, single T (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F 75mm CI Branch pieces, single T (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed.

S&F 110mm bore PVC SWR soil waste pipes single socketed in any length with rubber ring joint fixed to walls with clamp including dismantling of any type pipe and fitting complete all as specified and directed.

S&F 75mm bore PVC SWR soil waste pipes single socketed in any length with rubber ring joint fixed to walls with clamp including dismantling of any type pipe and fitting complete all as specified and directed.

S&F 110mm bore PVC SWR bends of any radius complete all as specified and directed.

S&F 110mm bore SWR junction, single T equal or unequal complete all as specified and directed.

S&F 110mm bore SWR junction, double T equal or unequal complete all as specified and directed.

S&F stack clamps mode out of 50x5mm flat iron including bolts and nuts and securing ends of stays to wall or roof, for 100mm bore pipes, complete all as specified and directed.

M&L for bands, straps, supports or stays for rainwater , Ventilating pipes, including bolts , if required; hooks ( stay), heavy, for large gates; hook and lintle hanges; large hasps and staples ; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters ; knee piece inserts; two way and three ways straps , plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Taking up or down 15mm dia, steel tubing & connections including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-Charge.

Taking up or down 20mm dia, steel tubing & connections including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-Charge.

S&F 15mm bore galvanized steel water tubing medium grade with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-charge.

S&F 20 mm bore galvanized steel water tubing medium grade with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-charge.

Refixing old steel tubing and connections in new or old position (walls, ceiling , floors, etc.)15 mm nominal bore complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (walls, ceiling , floors, etc.)20 mm nominal bore complete all as specified and directed.

S&F in replacement of Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete and including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm dia PVC flush pipe complete including jointing to socket of flushing rim, complete all as specified and directed.

S&F in repair PVC valve less, symphonic action type, flushing cistern 10 ltr capacity, low level, white/coloured, with inlet, wall valve, float and handle, flush pipe including bracket complete all as specified and directed.

S&F in repair chromium plated shower rose with or without swivel joints including fixing to steel pipe of 125 mm size complete all as specified and directed.

S&F in repair for shower arm of 15mm bore, 195 mm long with bend of 45 degree with flange of CP of any colour and fixed complete all as specified and directed.

S&F in repair vitreous china wash basin, white, flat back, size 550 X 400mm including waste fitting and brackets but excluding tapes, chain and plug etc complete all as specified and directed.

S&F in repairs 32mm bore waste fittings chromium plated for sinks, basins with long shanks and fly nuts, flange and bedded in red cement and fixed, complete all as specified and directed.

Disconnecting existing tank of capacity 500 litre to 1000 litre, setting aside (or lowering if required) for repairs, cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipe etc including writing with white paint (Date of cleaning), hoisting if required, reconnecting and re-fixing in position complete all as specified and directed.

Disconnecting existing tank of capacity 250 litre to 500 litre, setting aside (or lowering if required) for repairs, cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipe etc including writing with white paint (Date of cleaning), hoisting if required, reconnecting and re-fixing in position complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including dismantling water tank of 750 Ltr capacity complete all as specified and directed.

S&F in repairs Brass CP mixer of 15mm bore for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair for 15mm bib tap standard of PTMT any colour screwed for iron pipe and fixed, complete all as specified and directed. (minimum weight 90 gm).

S&F in repairs 15 mm size stop cock of PTMT in any colour screwed for iron pipe and weight not less than 90 gram per cock complete all as specified and directed.

S&F in repair 20mm dia PTMT ball valve high Pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (min wt 210 gms) complete all as specified and directed.

S&F in repair 2 way 15mm bib cock cast copper alloy fancy type (min weight 350 gm) screwed down, screwed for iron pipe or for brass ferrule and fix complete all as specified and directed.

S&F in repair 15mm bore chromium plated bib tap long shanks cast copper alloy fancy type (min weight 350 gm) screwed down, screwed for iron pipe or for brass ferrule and fix complete all as specified and directed.

S&F in repair 15mm bore CP pillar taps fancy type cast copper alloy (min weight 350 gm) along screwed down high pressure with lettered hot & cold with long screwed shanks and fly nuts screwed for GI pipe complete all as specified and directed.

S&F in repair CP angle / stop cock fancy type chromium plated (min weight 350 gm) 15 mm bore screwed down, high pressure screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair CP Jet spray butter fly design fixed on EWC with stanless screw as approve complete all as specified and directed.

S&F in repair CP Health faucet with stand fixed on wall in CP hose pipe 1 mtr length and stainless steel screw as approve complete all as specified and directed.

S&F in repair PVC waste pipe 32mm dia of length 0.8mm to 0.9mm fixed complete all as specified and directed.

S&F in repair vitreous china wash down, water closet pan (pedestal pattern), white including fixing bolts and connection to flush pipe and drain out going pipe and closet seat cover black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, CP jet including PVC connection including 10 ltr capacity PVC valveless symphonic action low level flushing cistern complete all as specified and directed.

S&F in repair PVC cover for PVC Water tank 500/750/1000ltr capacity with self locking arrangement, complete all as specified and directed.

S&F in repair PVC seat cover of any type, colour & make suitable for peddestal pan complete all as specified and directed.

S&F in repair stainless steel kitchen sink 1 mm thick kitchen/laboratories with plug washer and waste including bedding in cement mortar and fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repair stainless steel kitchen sink 1 mm thick with drainage board kitchen/laboratories with plug washer and waste including bedding in cement mortar and fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repair chromium plated grating 125mm dia circular, fixing with cement mortar (1:3) on Nahani or floor tap complete all as specified and directed.

S&F in repairs towel rail chromium plated 20mm dia ‘D’ type, 600mm long, complete all as specified and directed.

S&F in repair of PVC connection pipe 15mm size with nuts, washers of length 600mm pipe complete all as specified and directed.

S&F in repair PVC mirror cabinet size 350X450mm of standard size fixed to wall with PVC sleeves and steel screws complete all as specified and directed.

Shiva Traders

M/S CHAUDHARY CONSTRUCTION

M/s Hoti Lal Contractor