GE/BAS-81/2025-26 Repair and maint of wooden and steel furniture items at Basoli and Janglote Mil Station under GE Basoli

Amount

Material and labour for replacement of top of table dressing gents of size 900mmx300mm with 18 / 19 mm thick prelaminated MDF board exterior gade ISI marked all other as per existing and complete all as shown on drawing and specified. Make:-Greenply, Action Tesa or equivalant.

Material and labour for replacement of bottom of table dressing with 18/19 mm thick prelaminated MDF board exterior grade, ISI marked all other as per existing and complete all as shown on drawing and specified.

Material and labour for replacement of side of table dressing with 18/19 mm thick prelaminated MDF board exterior grade, ISI marked all other as per existing and complete all as shown on drawing and specified.

Material and labour for replacement of back of table dressing with gents with 12mm thick commercial plywood ISI marked and 02 Nos of MS key plate shall be fixed for hanging purpose, complete all as shown on drawing and specified.

Material and labour for replacement of drawer of table dressing gents including one CP Knob as per sample fixed to each drawer complete all as shown on drawing and specified.

TABLE DRESSING LADIES WITH MIRROR (FD-378) (For Srl Item No 07 to 10) M & L for Box for Table Dressing Ladies of size 1200mm x 600mm made out of 18mm thick MDF exterior grade melamine faced. ISI marked with and including aluminium channel 12mm x 22mm all round complete.

M & L for Frame of size 1200mm x 365mm made of Sheesham wood, with & including back of 6mm thick ply wood ISI Marked commercial plywood for looking mirror complete.

Material and labour for preparation of surfaces by removing of old existing fade out polish from following wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on exposed surfaces to view all as specified and as directed.

TABLE BED SIDE (FD-248) (For Srl Item No 11 to 17) Taking out of un serviceable legs including fixing of new leg made of 1st class hard teak wood (MP) and equlvalent of size and shape, complete all as shown on drawing and specified.

Material and labour for taking out broken front/back rail of Table and supply and fixing new front/back rail of required size made out of well seasoned 1st class teak wood complete all as shown on drawing and specified.

Material and labour for taking out broken side rail of Table and supply and fixing new side rail of required size made out of well seasoned 1st class teak wood, complete all as shown on drawing and specified .

Material and labour for taking out unserviceable back ply of Table bed side and fixing new back ply of 6 mm thick commercial type of required size, complete all as shown on drawing and specified.

Material and labour for taking out unserviceable Shelve of table and fixing new back shelve of 18/19mm thick prelaminated MDF board exterior grade ISI marked, complete all as shown on drawing and specified.

Material and labour for taking out Top/Bottom unserviceable board with hard wood beeding and fixing 18/19mm thick prelaminated MDF board exterior grade ISI marked including hard wood beeding, complete all as shown on drawing and specified.

Material and labour for taking out unserviceable side board and fixing 18/19mm thick prelaminated MDF board exterior grade ISI marked including hard wood beeding, complete all as shown on drawing and specified.

TABLE PEG (FD-384) (For Srl Item No 18 to 23) Material and labour for replacement of table top with 18/19mm thick P/L MDF board (exterior grade), ISI Marked, incl 4mm thick half round teak wood beading shall be provided al-round the top of table. All as per drawing and as specified and directed.

Material and labour for replacement of leg of peg table with new legs of required size made out of well seasoned 1st class Teak wood, all as per drawing and as specified and directed.

Material and labour for replacement of damaged front rail of peg table with well seasoned 1st class Teakwood, all as per drawing and as specified and directed.

Material and labour for replacement of damaged side rail of peg table with well seasoned 1st class Teakwood all as per drawing and as specified and directed.

Material and labour for preparation of surfaces by removing of old existing fade out polish from following wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on exposed surfaces to view all as specified and as directed.

Material and labour for supply and fixing of PVC shoes (04 Nos per table) fixed to the legs of table with screw.

TABLE DINING 120 x 90CM (FD/E6/MAP/II/03) (For Srl Item No 24 to 30) S&F in replacement of top to table dining 4 person made out of 18/19mm thick P/L MDF board (exterior grade confirming to IS standard one side teak finish and other side white laminated duly fixed with 4mm thick beading of teak wood all around the top after taking out old top.

Supply & fixing in replacement of long rail to table dining 6 person made out of Teak wood.

Supply & fixing in replacement of short rail to table dining 6 person made out of Teak wood.

Supply & fixing in replacement of legs to table dining 6 person made out of Teakwood.

Supply and fixing of 08 x corners to each legs and rails of table adjoning point.

Material and labour for supply and fixing of PVC shoes (04 Nos per table) fixed to the legs of table with screw.

Material and labour for preparation of surfaces by removing of old existing fade out polish from following wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on exposed surfaces to view all as specified and as directed.

TABLE DINING 6 PERSON (FD/MAP/E6/II/03, FD-1115, 273 & 239) (For Srl Item No 31 to 38) S&F in replacement of top to table dining 6 person made out of 18/19mm thick P/L MDF board (exterior grade confirming to IS standard one side teak finish and other side white laminated duly fixed with 4mm thick beading of teak wood all around the top after taking out old top.

Supply & fixing in replacement of long rail to table dining 6 person made out of Teak wood.

Supply & fixing in replacement of short rail to table dining 6 person made out ofTeak wood.

Supply & fixing in replacement of legs to table dining 6 person made out of Teakwood

Supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed.

Supply and fixing of 08 x corners to each legs and rails of table adjoning point.

Material and labour for supply and fixing of PVC shoes (04 Nos per table) fixed to the legs of table with screw.

Material and labour for preparation of surfaces by removing of old existing fade out polish from following wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on exposed surfaces to view all as specified and as directed.

TABLE DINING 8 PERSON (FD-1115, 273 & 239) (For item ser No 39 to 46) S&F in replacement of top to table dining 8 person made out of 18/19mm thick P/L MDF board (exterior grade) confirming to IS standard one side teak finish and other side white laminated duly fixed with 4mm thick beading of teak wood all around the top after taking out old top.

Supply & fixing in replacement of long rail to table dining 8 person made out of Teak wood

Supply & fixing in replacement of short rail to table dining 8 person made out of Teak wood

Supply & fixing in replacement of legs to table dining 8 person made out of Teakwood

Supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed.

Supply and fixing of 08 x corners to each legs and rails of table adjoning point.

Material and labour for supply and fixing of PVC shoes (04 Nos per table) fixed to the legs of table with screw.

Material and labour for preparation of surfaces by removing of old existing fade out polish from following wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on exposed surfaces to view all as specified and as directed.

TABLE 3’ X 2’ (WITH/WITHOUT DRAWER) (FD-283/284 & 223/224) (For item ser No 47 to 55) Material and labour for replacement of table top with 18/19mm thick P/L MDF board (exterior grade) ISI Marked, incl 4mm thick half round teak wood beading shall be provided al-round the top of table. All as per drawing and as specified and directed.

Taking out broken legs of Table and supply and fixing new leg of required size made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed.

Taking out broken front rail of Table and supply and fixing new front rail of required size made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed.

Taking out broken side rail of Table and supply and fixing new side rail of required size made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed.

Material and labour for replacement of drawer with fancy knob.

Taking out broken stiffener of Table and supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed.

Material and labour for supply and fixing of PVC shoes (04 Nos per table) fixed to the legs of table with screw.

Supply and fixing of 08 x corners to each legs and rails of table adjoning point.

Material and labour for preparation of surfaces by removing of old existing fade out polish from following wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on exposed surfaces to view all as specified and as directed.

TEA POY (FD-232 and FD-278) (For item ser No 56 to 62) Material and labour for replacement of table top with 18/19mm thick P/L MDF board (exterior grade) ISI Marked, incl 4mm thick half round teak wood beading shall be provided al-round the top of table. All as per drawing and as specified and directed.

Taking out broken legs of tea poy and supply and fixing new leg of required size made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed.

Material and labour for replacement of damaged front rail of tea poy with well seasoned 1st class Teakwood, all as per drawing and as specified and directed.

Material and labour for replacement of damaged side rail of tea poy with well seasoned 1st class Teakwood, all as per drawing and as specified and directed.

Taking out broken stiffener of tea poy and supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed.

Material and labour for supply and fixing of PVC shoes (04 Nos per table) fixed to the legs of table with screw.

Material and labour for preparation of surfaces by removing of old existing fade out polish from following wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on exposed surfaces to view all as specified and as directed.

SOFA SET 4 SEATER (FD-1113): (For item ser No 63 to 70) Supply of foam cushion of size 530 mm X 565 mm X 100 mm thick (32 high density) (Make : Sleepwell/Kurlon) covered with tapestry cloth (not less than Rs.180/- per mtr cost of cloth) including stitching with one side Zip complete as per sample and all as directed.

M & L for supply and fixing of Arm rest made of 1st class teak wood of size 35mmx70mm and shape & length as per drg.

M & L for supply and fixing of front rail single seater made of 1st class teak wood of long piece of size 35mmx70mmx530MM and shape & length as per drg.

M & L for supply and fixing of back rail single seater made of 1st class teak wood hard of size 35mmx70mmx530MM and shape & length as per drg.

M & L for supply and fixing of legs made of 1 st class teak wood hard of size 70mmx35mmx530MM & shape& length as per drg.

M&L for supply & fixing of wooden batten for seat & back size as per drg

Material and labour for supply and fixing of PVC shoes (4 Nos x 4 sofa Total 16 Nos) fixed to the legs of sofa with screw.

Material and labour for preparation of surfaces by removing of old existing fade out polish from following wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on exposed surfaces to view all as specified and as directed.

SOFA SET 5 SEATER (FD-1113): (For item ser No 71 to 80) Supply of foam cushion of size 530 mm X 565 mm X 100 mm thick (32 high density) (Make : Sleepwell/Kurlon) covered with tapestry cloth (not less than Rs.180/- per mtr cost of cloth) including stitchingwith one side Zip complete as per sample and all as directed.

M & L for supply and fixing of Arm rest made of 1st class teak wood of size 35mmx70mm and shape & length as per drg.

M & L for supply and fixing of front long rail made of 1st class teak wood of long piece (3 seater) of size 35mmx70mmx1730MM and shape & length as per drg.

M & L for supply and fixing of back long rail made of 1st class teak wood of long piece (3 seater) of size 35mmx70mmx1730MM and shape & length as per drg.

M & L for supply and fixing of front rail single seater made of 1st class teak wood of long piece of size 35mmx70mmx530MM and shape & length as per drg.

M & L for supply and fixing of back rail single seater made of 1st class teak wood hard of size 35mmx70mmx530MM and shape & length as per drg.

M & L for supply and fixing of legs made of 1 st class teak wood hard of size 70mmx35mmx530MM & shape& length as per drg.

M&L for supply & fixing of wooden batten for seat & back size as per drg

Material and labour for supply and fixing of PVC shoes (4 Nos x 3 sofa Total 12 Nos) fixed to the legs of sofa with screw.

Material and labour for preparation of surfaces by removing of old existing fade out polish from following wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on exposed surfaces to view all as specified and as directed.

CHAIR DINING (FD-1105, 279, 228 & FD/E6/MAP-II/05): (For item ser No 81 to 91) Material and labour for replacement of damaged front leg of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed.

Material and labour for replacement of damaged rear leg of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed.

Material and labour for replacement of damaged back rest of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed.

Material and labour for replacement of damaged stiffener complete of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed.

Material and labour for replacement of damaged side rail of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed.

Material and labour for replacement of damaged front rail of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed.

Material and labour for replacement of damaged back rail of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed.

Material and labour for preparation of surfaces by removing of old existing fade out polish from following wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on exposed surfaces to view all as specified and as directed.

M&L for removing U/S plastic cane from various type of chairs and recanning with 2MM vide SHAH/PRIMIUM plastic cane incl porvn of plastic cane good quality as directed Boarder of chair shall be canning with 3 MM vide cane of Make SHAH/Primium quaity of Godrej pattern. Rest all as specified and shown on drg.

M&L for removing U/S plastic seat from chairs and replacing with PVC seat 4mm thick of PPCP material with perforated holes (Make- Amko or equivalent) shall be fixed in the frame of seat with screws as shown on drg and as specified and directed.

Material and labour for supply and fixing of PVC shoes (04 Nos per chair) of chair dinning fixed to the legs with screw.

CHAIR WRITING (FD - 280, 250) (For item ser No 92 to 102) Material and labour for replacement of damaged front legs of Chair writing made out of well seasoned 1st class Teak wood, all as per drawing and as specified and directed.

Material and labour for replacement of damaged rear legs of Chair writing made out of well seasoned 1st class Teakwood, all as per drawing and as specified and directed.

Material and labour for replacement of damaged back rest of Chair writing made out of well seasoned 1st class Teakwood, all as per drawing and as specified and directed.

Material and labour for replacement of damaged stiffener complete of Chair writing made out of well seasoned 1st class Teakwood, all as per drawing and as specified and directed.

Material and labour for replacement of damaged side rail of chair writing with well seasoned 1st class teak wood, all as per drawing and as specified and directed.

Material and labour for replacement of damaged front rail of chair writing with well seasoned 1st class teak wood, all as per drawing and as specified and directed.

Material and labour for replacement of damaged back rail of chair writing with well seasoned 1st class teak wood, all as per drawing and as specified and directed.

Material and labour for replacement of damaged fillet for canning of seat of chair writing with well seasoned 1st class teak wood, all as per drawing and as specified and directed.

Material and labour for preparation of surfaces by removing of old existing fade out polish from following wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on exposed surfaces to view all as specified and as directed.

M&L for removing U/S plastic cane from chair and recanning with 2mm vide SHAH/PRIMIUM plastic cane incl provision of plastic cane good quality, border of chair shall be canning with 3 mm vide cane of Make SHAH/Primium quality of Godrej pattern. Rest all as specified and directed .

Material and labour for supply and fixing of PVC shoes (04 Nos per chair) to the legs of chair writing fixed with screw.

TABLE WRITING (FD – 33, 249 ,275) (For item ser No 103 to 108) Material and labour for replacement of table top with 18/19mm thick P/L MDF board (exterior grade) one side teak face, ISI Marked, incl 4mm thick half round teak wood beading shall be provided al-round the top of table. All as per drawing and as specified and directed.

Taking out broken legs of Table and supply and fixing new leg of required size made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed.

Taking out broken stiffener of Table and supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed.

Material and labour for supply and fixing of PVC shoes (04 Nos per Table) to the legs of table writing fixed with screw.

Material and labour for replacement of box & shutter with 18/19mm thick pre laminated MDF board one side teak faced (exterior grade) with 4mm thick teak wood edging all round including Knob and lock complete all as per drawing and as specified and directed.

Material and labour for preparation of surfaces by removing of old existing fade out polish from following wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on exposed surfaces to view all as specified and as directed.

BED HARD PLYWOOD TOP (FD-246/21M) (For item ser No 109 to 113) Material and labour for replacement of top of bed ply wood with 12 mm thick commercial plywood, Moisture resistent grade confirming to IS 303, ISI marked of make Kit ply/century ply/green ply fixed on the top of bed plywood with screws. All as shown on drawing and as directed by the Engineer-in-Charge including taking out old bed top.

Material and labour for replacement of damaged long rail of bed with well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge including taking out old long rail.

Material and labour for replacement of unserviceable head board complete set of bed ply wood top including corners at adjoining point, all as per drawing and as specified and directed.

Material and labour for replacement of unserviceable foot board complete set of bed ply wood top including corners at adjoining point, all as per drawing and as specified and directed.

Material and labour for preparation of surfaces by removing of old existing fade out polish from following wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on exposed surfaces to view all as specified and as directed.

TABLE CENTRE (FD-274/235) (For item ser No 114 to 120) Material and labour for replacement of table top with 18/19mm thick Prelaminated MDF board (exterior grade), ISI Marked, incl 4mm thick half round teak wood beading shall be provided al-round the top of table. All as per drawing and as specified and directed.

Taking out broken legs of Table and supply and fixing new leg of required size made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed.

Material and labour for replacement of damaged front rail of table with well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge including taking out old front rail.

Material and labour for replacement of damaged side rail of table with well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge including taking out old side rail.

Material and labour for supply and fixing of PVC shoes (04 Nos per Table) to the legs of table centre fixed with screw.

Supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed.

Material and labour for preparation of surfaces by removing of old existing fade out polish from following wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on exposed surfaces to view all as specified and as directed.

CHAIR EASY (FD - 229/1108) (For item ser No 121 to 128) Material and labour for replacement of damaged front legs of Chair easy with well seasoned 1st class Teakwood, all as per drawing and as specified and directed.

Material and labour for replacement of damaged rear legs of Chair easy with well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge including taking out old leg.

Material and labour for replacement of damaged arm-rest of Chair easy with well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge including taking out old arm - rest.

Material and labour for replacement of damaged fillet for canning of seat and back of Chair easy with well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge including taking out old fillet.

Material and labour for replacement of damaged rail of seat and back of Chair easy with well seasoned 1st class Teakwood, all as per drawing and as specified and directed.

Material and labour for preparation of surfaces by removing of old existing fade out polish from following wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on exposed surfaces to view all as specified and as directed.

M&L for removing U/S plastic cane from various type of chairs and recanning with 2MM vide SHAH/PRIMIUM plastic cane incl porvn of plastic cane good quality as directed Boarder of chair shall be canning with 3 MM vide cane of Make SHAH/Primium quaity of Godreg pattern. Rest all as specified and shown on drg.

Material and labour for supply and fixing of PVC shoes (04 Nos per chair) of chair easy fixed to the legs with screw.

TABLE PEG (FD-1114) (For item ser No 129 to 132) Material and labour for replacement of table top with 18/19mm thick P/L MDF board (exterior grade), ISI Marked, incl 4mm thick half round teak wood beading shall be provided at visible edges of the table top . All as per drawing and as specified and directed.

Material and labour for replacement of side of peg table with new 8/19mm thick P/L MDF board (exterior grade) ISI Marked required size incl 4mm thick half round teak wood beading shall be provided at edges as per drawing and as specified and directed.

Material and labour for replacement of bottom of peg table with new 8/19mm thick P/L MDF board (exterior grade), ISI Marked required size incl 4mm thick half round teak wood beading shall be provided at edges as per drawing and as specified and directed.

Material and labour for replacement of back of peg table with 6mm plywood ISI marked, all as per drawing and as specified and directed.

DRESSING MIRROR 4'x2' WITH WOODEN FRAME (For item ser No 133 to 136) Material and labour for replacement of mirror with required size of 47"x23" 5mm thick. All as per sample and as specified and directed.

Material and labour for replacement of old frame of mirror with new as per required size 48"x24" with well seasoned 1st class Teakwood of 2.5"x1" thick. 1/2" thickness depth in frame all-round should be provided for placing of mirror. Two Nos of mild steel key hole plate to be fixed at top outer edges of the mirror frame for hanging. All as per sample and as specified and directed.

Material and labour for replacement of old plywood at back of mirror with new 6mm thick plywood, ISI marked confirming to IS 303. All as per sample and as specified and directed.

Material and labour for preparation of surfaces rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on exposed surfaces to view all as specified and as directed.

MIRROR WITH SHELF (FD-52M) (For item ser No 137 to 141) Material and labour for replacement of old shelf with new prelaminated MDF board (exterior grade) ISI marked, size of 600x230mm with 4mm thick teakwood beading shall be provided all-round the shelf including 02 Nos MS bracket 150x125mm shall be provided with shelf wall mounting.

Material and labour for replacement of damaged mirror with new mirror of size 455mm high 355mm wide 5mm thick.

Material and labour for replacement of damaged frame with well seasoned 1st class Teakwood 25x19mm thick, including two Nos of key plate to be fixed at top outer edges of the mirror frame for hanging. all as per drawing and as specified and directed.

Material and labour for replacement of old plywood at back of mirror with new 6mm thick plywood, ISI marked. All as per sample and as specified and directed.

Material and labour for preparation of surfaces rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on exposed surfaces to view all as specified and as directed.

TABLE 3’ X 3’ (FD-291/88M) (For item ser No 142 to 149) Material and labour for replacement of table top with 18/19mm thick P/L MDF board (exterior grade) ISI Marked, incl 4mm thick half round teak wood beading shall be provided al-round the top of table. All as per drawing and as specified and directed.

Taking out broken legs of Table and supply and fixing new leg of required size made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed.

Taking out broken front rail of Table and supply and fixing new front rail of required size made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed.

Taking out broken side rail of Table and supply and fixing new side rail of required size made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed.

Taking out broken stiffener of Table and supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed.

Material and labour for supply and fixing of PVC shoes (04 Nos per table) fixed to the legs of table with screw.

Supply and fixing of 08 x corners to each legs at adjoning with rails.

Material and labour for preparation of surfaces by removing of old existing fade out polish from following wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on exposed surfaces to view all as specified and as directed.

CHAIR DINING CUSHIONED (FD/MAP-II/04 & FD/E6/MAP/10R) (For item ser No 150 to 157) Material and labour for replacement of damaged front leg of chair dining cushioned with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed.

Material and labour for replacement of damaged rear leg of chair dining cushioned with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed.

Material and labour for replacement of damaged back rest/batten of chair dining cushioned with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed.

Material and labour for replacement of damaged side/front/back rail of chair dining cushioned with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed.

Material and labour for replacement of damaged stiffener complete of chair dining cushioned with well seasoned 1st class teak wood, all as per drawing and as specified and directed.

Material and labour for preparation of surfaces by removing of old existing fade out polish from chair by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of French polish of approved quality with high gloss finish on exposed surfaces as shown on drawing complete all as specified and directed.

Supply and fixing of PVC shoes (04 Nos per chair) to the legs of Chair dining cushioned fixed with screw.

Material and labour for removing old cushioned seat from Chair dinning and S&F new cushioned seat and ply wood of approved quality with tapestry cloth for chair dining as directed and as shown on drawing complete all as specified and directed.

SIDE BOARD (FD-1112 & 371) (For item ser No 158 to 164) Top of side board made out of 18mm thick Prelaminated MDF board (exterior grade) ISI marked complete all as specified and as directed by Engr-in-Charge. Make : Greenply/Action Tesa or equivlant.

Back of side board made out of 6mm thick commercial plywod Moisture Resistence, ISI marked complete all as specified and as directed by Engr-in-Charge. Make : Greenply/Archid ply

Drawer made out of 18mm thick Prelaminated MDF board (exterior grade) ISI marked, bottom fitted with plywood 6mm thick ISI marked complete all as specified and as directed by Engr-in-Charge. Make :Greenply/Action Tesa or equivlant.

Side made out of 18mm thick Prelaminated MDF board (exterior grade) ISI marked, complete all as spfd and as directed by Engr-in-Charge. Make :Greenply/ Action Tesa or equivlant.

Shutters of side board made out of 18mm thick Prelaminated MDF board (exterior grade) ISI marked, complete all as spfd and as directed by Engr-in-Charge. Make : Greenply/Action Tesa or equivlant.

Supply & fixing of leg made of Sheesham wood complete all as directed.

Supply & Fixing of 100mm long handle for drawer and shutters (06 Nos per side board) of approved quality.

TRESTLE STORE ROOM WOODEN (FD-141M & 86M) (For item ser No 165 to 169) Supply & Fixing for replacement of unserviceable Long rail made out of Ist class hard wood sheesham, all as specified and directed.

Supply & Fixing for replacement of unserviceable Short rail made out of Ist class hard wood sheesham, all as specified and directed.

Supply & Fixing for replacement of unserviceable Centre rail made out of Ist class hard wood sheesham, all as specified and directed.

Supply & Fixing for replacement of unserviceable Leg made out of Ist class hard wood sheesham .

Preservative of trestle store room wooden with cerosite oil and used engine oil of mixed ration 50:50.

CHAIR WRITING CUSHION (FD-1107) (For item ser No 170 to 180) Material and labour for replacement of damaged front legs of Chair writing cushion made out of well seasoned 1st class Teak wood, all as per drawing and as specified and directed.

Material and labour for replacement of damaged rear legs of Chair writing cushion made out of well seasoned 1st class Teakwood, all as per drawing and as specified and directed.

Material and labour for replacement of damaged arm rest of Chair writing cushion made out of well seasoned 1st class Teakwood, all as per drawing and as specified and directed.

Material and labour for replacement of damaged stiffener complete of Chair writing cushion made out of well seasoned 1st class Teakwood, all as per drawing and as specified and directed.

Material and labour for replacement of damaged side rail of chair writing cushion with well seasoned 1st class teak wood, all as per drawing and as specified and directed.

Material and labour for replacement of damaged front rail of chair writing cushion with well seasoned 1st class teak wood, all as per drawing and as specified and directed.

Material and labour for replacement of damaged back rail of chair writing cushion with well seasoned 1st class teak wood, all as per drawing and as specified and directed.

Material and labour for replacement of unserviceable seat and supply & fixing of new seat made out of high density rubberised foam fixed on 1st class well seasoned teak wood frame duly covered with black leatherite cloth, all as per drawing and as specified and directed.

Material and labour for replacement of unserviceable back and supply & fixing of new back made out of high density rubberised foam fixed on 1st class well seasoned teak wood frame duly covered with black leatherite cloth, all as per drawing and as specified and directed.

Material and labour for preparation of surfaces by removing of old existing fade out polish from following wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on exposed surfaces to view all as specified and as directed.

Material and labour for supply and fixing of PVC shoes (04 Nos per chair) to the legs of chair writing cushion fixed with screw.

Sch'A' Part-I, WOODEN FURNITURE TABLE 3' X 2' WITH / WITHOUT DRAWER STEEL (FD-1007 & 1008) (For Serial item No 181 to 187) Material and labour for replacement of top of table 3’ X 2’ with / without drawer steel with 18/19 mm thick MDF board (exterior grade) ISI marked with 4 mm thick teak wood edging all round shall be fixed to the frame all as per drawing & as specified and directed .

Material and labour for replacement of damaged legs by 25 mm square tube of wall thickness 1.6 mm and welding complete all as per shown on drawing and as specified and directed.

Material and labour for replacement damaged drawer of table made out of 1 mm thick MS black sheet including making shape, welded with gas welding shown on drawing complete all as specified and directed.

Material and labour for replacement of unserviceable lock of drawer of table (Make-Link, Harrison) shown on drawing complete all as specified and directed.

Material and labour for preparation of surface and welding to broken place complete all as specified and directed.

Material and labour for replacement of hard rubber shoe of black colour, complete all as specified and directed.

Material and labour for preparation of steel surfaces and filling cavities with putty including scrapping out old painted surface (external and internal) of Table and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer by spray painting complete all as specified and directed.

TEAPOY VERANDAH (FD-35M, 255) (For Serial item No 188 to 192) Material and labour for replacement of top of teapoy verandah with 18/19 mm thick pre laminated MDF board (exterior grade) one side white face ISI marked with 4 mm teak wood beading all round the top shall be fixed to the frame, all as per drawing complete all as specified and directed.

Material and labour for replacement of centre stiffener /side stiffner/Legs made of 19/20 mm square tube / conduit pipe of wall thickness 1.6 mm and welding complete all as directed.

Material and labour for preparation of surface and welding to broken place complete all as specified and directed.

Material and labour for replacement of hard rubber shoe of as per existing colour as approved complete all as specified and directed..

Material and labour for preparation of steel surfaces and filling cavities with putty including scrapping out old painted surface (external and internal) of Teapoy Varandah and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer by spray painting complete all as specified and directed .

TABLE OFFICE CLERK STEEL (FD-1004, 381 & 84M) (For Serial item No 193 to 201) Material and labour for replacement of top of table office clerk steel of size 1160 mm x 570 mm with 18/19 mm thick prelaminated MDF board (exterior grade) ISI marked with 4 mm thick teak wood edging all round shall be fixed to the frame all as per drawing & as specified and directed.

Material and labour for repair/replacement damaged drawer of table made out of 1 mm thick MS black sheet including making shape, welded with gas welding as shown on drawing complete all as specified and directed.

Material and labour for replacement of unserviceable lock of drawer with new lock of 6 Lever 65 mm of approved quality with duplicate key complete all as specified and directed.

S & F new chromium plated handle for drawer of table office clk steel of approved quality all as specified and directed

Material and labour for replacement of old keyhole cover with new chromium plated key hole cover of approved quality fixed with two screw complete all as specified and directed.

Material and labour for preparation of surface and welding to broken place complete all as specified and directed.

Material and labour for replacement of damaged legs by 25 mm square tube of wall thickness 1.6 mm and welding complete all as per shown on drawing and as specified and directed.

Material and labour for replacement of hard rubber shoe of as per existing colour as approved complete all as specified and directed.

Material and labour for preparation of steel surfaces and filling cavities with putty including scrapping out old painted surface (external and internal) of Table office clk steel and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer by spray painting complete all as specified and directed .

TABLE OFFICE OFFICER STEEL (FD-1003, 1002, 306 & 84) (For Srl Item No 202 to 212) Material and labour for replacement of top of table office officer steel of size 1680mm x 870mm with 18/19 mm thick MDF board (exterior grade) ISI marked with 4 mm thick teak wood edging all round shall be fixed to the frame all as per drawing & as specified and directed.

Material and labour for replacement of damaged drawer of table made out of 1 mm thick MS black sheet including making shape, welded with gas welding as shown on drawing complete all as specified and directed

Material and labour for replacement / repair of damaged box complete with locking arragements of table made out of 1 mm thick MS black sheet including making shape, welded with gas welding as shown on drawing complete all as specified and directed.

Material and labour for replacement of damaged shutter door of box complete with locking arragements of table made out of 1 mm thick MS black sheet including making shape, welded with gas welding as shown on drawing complete all as specified and directed.

Material and labour for replacement of unserviceable lock of drawer with new lock of 6 Lever 65 mm of approved quality with duplicate key.as shown on drawing complete all as specified and directed.

S & F new chromium plated recessed handle for drawer of table office offr steel of approved quality all as specified and directed

Material and labour for replacement of old keyhole cover with new chromium plated key hole cover of approved quality fixed with two screw complete all as specified and directed.

Material and labour for preparation of surface and welding to broken place complete all as specified and directed.

Material and labour for replacement of damaged legs by 25 mm square tube of wall thickness 1.6 mm and welding complete all as per shown on drawing complete as specified and directed.

Material and labour for replacement of hard rubber shoe of black colour as per existing as approved.as shown on drawing complete all as specified and directed.

Material and labour for preparation of steel surfaces and filling cavities with putty including scrapping out old painted surface (external and internal) of Table office clk steel and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer by spray painting complete all as specified and directed .

ALMIRAH LARGE STEEL ALL TYPES- FD-67M/1031 &1033 (For Srl Item No 213 to 222) Taking down old unserviceable lock of almirah large steel and supply and fixing new lock of suitable size provided with and fixed with screws with duplicate keys complete all as specified and directed.

Material and labour fixed in repair/replacement for locking device with cover of almirah steel large including lock bar complete all as specified and directed.

Material and labour fixed in repair for door shutters by denting and necessary adjustment as required complete all as specified and directed.

Supply and fixing for new door shutters made out of 1 mm thick mild steel black sheet including taking down old unserviceable door shutters of almirah large steel complete all as specified and directed.

Supply and fixing for new chromium plated handle, fixed with screws incuding taking down old unserviceable handle of almirah large steel complete all as specified and directed.

Supply and fixing for new chromium plated key hole cover plate, fixed with screws incuding taking down old unserviceable key hole cover of almirah large steel complete all as specified and directed.

Supply and fixing for new legs made out of 1 mm thick mild steel black sheet including taking down old unserviceable legs of almirah large steel complete all as specified and directed.

Supply and fixing for new shelves made out of 1 mm thick mild steel black sheet made to shape including down old unserviceable shelves of almirah large steel complete all as specified and directed.

Material and labour for prepartion of surfacs and welding to broken place complete all as specified and directed.

Material and labour for preparation of steel surfaces and filling cavities with putty including scrapping out old painted surface (external and internal) of Almirah Large Steel steel and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer by spray painting complete all as specified and directed .

ALMIRAH MEDIUM STEEL WITH SHELVE (FD-1032 & FD-243 & 67M) (For Srl Item No 223 to 232) Material and labour for Supply and fixing new lock of suitable size provided with duplicate keys as per sample, fixed with screws including taking down old unserviceable lock of almirah medium steel complete all as specified and directed.

Material and labour fixed in repair/replacement of intruded three way locking device with cover of almirah steel medium steel including lock bar complete all as specified and directed.

Material and labour fixed in repair for door shutters by denting and necessary adjustment as required complete all as specified and directed.

Supply and fixing for new door shutters made out of 1 mm thick mild steel black sheet including taking down old unserviceable door shutters of almirah medium steel complete all as specified and directed.

Supply and fixing for new chromium plated key hole cover plate, fixed with screws incuding taking down old unserviceable key hole cover of almirah large steel complete all as specified and directed

Supply and fixing for new chromium plated handle, fixed with screws including, taking down old unserviceable handle of almirah medium steel complete all as specified and directed.

Supply and fixing for new legs made out of 1 mm thick mild steel black sheet including taking down old unserviceable legs of almirah medium steel complete all as specified and directed.

Supply and fixing for new shelves made out of 1 mm thick mild steel black sheet made to shape including taking down old unserviceable shelves of almirah medium steel complete all as specified and directed.

Material and labour for prepartion of welded steel surfacs of externally/internally with putty ready for painting for denting to old chipped surfaces complete all as specified and directed.

Material and labour for preparation of steel surfaces and filling cavities with putty including scrapping out old painted surface (external and internal) of Almirah LargeMed/small Steel and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer by spray painting complete all as specified and directed .

LOCKER BED SIDE STEEL (FD-1029 & 127) (For item ser No 233 to 240) Supply and fixing for new legs made out of 1 mm thick mild steel black sheet including taking down old unserviceable legs of locker steel complete all as specified and directed.

Material and labour for replacement for old damaged hasp and staples with new hasp and staples chromium plated safety type 100mm long of approved quality complete all as specified and directed.

Supply and fixing for new chromium plated handle set, 100 mm size of approved quality fixed with screws including taking down old unserviceable handle of locker steel complete all as specified and directed.

Material and labour for repairing of door shutters for denting and necessary adjustment as required complete all as specified and directed.

Supply and fixing for new locker steel door shutters made out of 1 mm thick mild steel black sheet including taking down old unserviceable door shutters of locker steel complete all as specified and directed.

Supply and fixing for replacement of new chromium plated hanging rod of locker steel shape & size complete all as specified and directed.

Material and labour for prepartion of surfacs and welding to broken place complete all as specified and directed.

Material and labour for preparation of steel surfaces and filling cavities with putty including scrapping out old painted surface (external and internal) of Locker Bed side steel and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer by spray painting complete all as specified and directed.

CHARPOY TUBULAR STEEL ORs (CEPZ/SK/07/08 & all) (For item ser No 241 to 244) Material and Labour for replacement of 12 mm thick Plywood top on existing charpoy tubular steel after repairing of frame/charpoy. Plywood shall be 12 mm thick, commercial type, MR grade, ISI marked Make : Century ply/Archid ply/green ply/Kit Ply in single piece. Plywood shall be fixed to charpoy frame with and including nuts, bolts and screws complete all as specified in drawing and as directed.

Material and Labour for replacement stiffeners made of 25mm Sq MS tubular pipe 1.6 mm thick and welded to long rail horizontally (one end to each long rail) at equal distance including drilling holes where ever required for fixing plywood with bolts and painting to MS sq pipe pieces with two coats of black synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and as directed.

Material and labour for preparation of steel surfaces and filling cavities with putty on surface of CHARPOY TUBULAR STEEL ORs and applying of paint, complete all as specified and directed .

Material and labour for replacement of hard rubber shoe of legs (04 Nos per charpoy) as per existing colour as approved, complete all as specified and directed.

CHARPOY GI PIPE WITH PLY TOP (FD-220) (For item ser No 245 to 250) Material and Labour for replacement of 12 mm thick Plywood top on existing charpoy GI pipe after tightening/ repairing of frame/charpoy. Plywood shall be 12 mm thick, commercial type, MR grade, ISI marked in single piece. Plywood shall be fixed to charpoy frame with and including nuts, bolts and GI washers (minimum 10 Nos per charpoy), dia of bolt not less than 8mm complete all as specified and as directed.

Material and Labour for replacement stiffeners made of 25mm Sq MS Conduit pipe 1.6 mm thick and welded to long rail horizontally (one end to each long rail) at equal distance including drilling holes where ever required for fixing plywood with bolts and painting to MS sq pipe pieces with two coats of black synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and as directed.

Material and Labour for replacement three way elbow, 32mm dia, heavy duty, ISI marked for GI pipe charpoy all as directed.

Material and Labour for replacement new long rail for charpoy GI Pipe of 32mm bore GI pipe medium grade (ISI marked) long rails threaded on both ends one side 22mm and other side 40mm complete all as shown on drg and directed.

Cutting and fixing old unserviceable long rail of charpoy GI pipe 32mm and converted into short rail obtained from ser No 248 above and threaded both ends one side 22mm and other side 40mm complete all as shown on drg and directed.

Cutting and fixing 32mm bore GI pipe for legs made out of unserviceable short rails obtained from ser No 249 above as per drg including threading. Also S&F 32mm dia, PVC shoes at bottom of legs and S&F of MS clamps for FMN set complete all as shown on drg and directed.

TABLE COMPUTER (FD/E6/MAP/03, TP) (For item ser No 251 to 257) Material and labour for table top made of 18mm thick prelaminated MDF board exterior grade ISI marked with 4 mm thick beading alround the top, complete all as shown on drawing and specified.

Material and labour for 18mm thick prelaminated MDF board exterior grade ISI marked, as use in key board tray of computer table with 4 mm thick beading alround the tray and telescopic channels fixed with screw. complete all as shown on drawing and specified .

Material and labour for 18mm thick prelaminated MDF board exterior grade ISI marked as use in drawer of computer table with 4 mm thick beading alround the tray and telescopic channels and fancy type Knob fixed with screw.complete all as shown on drawing and specified .

Material and labour for 18mm thick prelaminated MDF board exterior grade ISI marked as use in board pull out tray of computer table with 4 mm thick beading alround the tray and telescopic channels fixed with screw.complete all as shown on drawing and specified .

Material and labour for 18mm thick prelaminated MDF board exterior grade ISI markedas use in middle shelf of computer table with 4 mm thick beading alround the middle shelf fixed with screw.complete all as shown on drawing and specified .

Material and labour for 18mm thick prelaminated MDF board exterior grade ISI marked as use in vertical shelf of computer table with 4 mm thick beading alround the shelf fixed with screw.complete all as shown on drawing and specified .

Material and labour for 18mm thick prelaminated MDF board exterior grade ISI marked as use in bottom shelf of computer table with 4 mm thick beading alround the shelf fixed with screw.complete all as shown on drawing and specified .

CHAIR SCHOOL WITH HAND BOARD (FD/E6/MAP/05) (For item ser No 258 to 262) Material and labour for replacement of PVC moulded bucket seat, to be fitted with screw made of alumunium alloy, complete all as shown on drawing and specified.

Material and labour for replacement of openable writing board and slide, board shall be of 18mm thick prelaminated MDF board of extenior grade confirming to IS-standard duly fitted to slide on the right frame. The edge of top shall be finished with beading with wire nails.

Material and labour for replacement of damaged MS rod 5mm thick at space provided for bag below seat with new MS rod 5mm thick from leg to leg and longitude & transverse direction, complete all as shown on drawing and specified.

Material and labour for replacement of hard rubber shoe as per existing colour as approved complete all as specified and directed.

Material and labour for preparation of steel surfaces and filling cavities with putty including scrapping out old painted surface (external and internal) of Chair school and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer by spray painting complete all as specified and directed .

CHAIR COMPUTER/ CHAIR EXECUTIVE REVOLVING (TP) (For item ser No 263 to 267) Material and labour for taking out unserviceable pedestal assembly and caster wheel(Twin) of chairs and supply fixing new pedestal assembly as per existing size, shape and pattern, as directed.

Material and labour for taking out unserviceable Gas lift pneumatic system cylinder and accesory of chair computer and supply & fixing new all as per existing size, shape and pattern as directed.

Material and labour for taking out unserviceable PVC arm 02 Nos of chair computer and supply fixing new all as per existing size, shape and pattern as directed.

Material and labour for taking out unserviceable Tapestry cloth of Seat PU foam cushion and supply and fixing new tapestry cloth and PU foam cushion of approved qulality with PVC lapping all around including new hot pressed plywood 12mm for seat as directed.

Material and labour for taking out unserviceable Tapestry cloth of back PU foam cushion and supply and fixing new tapestry cloth and PU foam cushion of approved qulality with PVC lapping all around including new hot pressed plywood 12mm for back as directed.

TABLE DINING ORs (FD-165) (For item ser No 268 to 272) Replacement of top of table dining for ORs with 18/19 mm thick pre laminated block board (exterior grade) and fixed with aluminium sheet of 1 mm thickness over the top all as per drawing, complete all as specified and directed.

Material and Labour for replacement of damaged legs/stiffners with 25 mm square tube of wall thickness 1.6 mm and welding complete all as per shown on drawing and specified.

Material and Labour for replacement of hard rubber shoe of black colour and match as per existing complete all as per shown on drawing and specified

Material and labour for prepartion of surfaces and welding to broken place complete all as specified and directed.

Material and labour for preparation of steel surfaces and filling cavities with putty including scrapping out old painted surface (external and internal) of Table dinning ORs steel and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer by spray painting complete all as specified and directed .

CHAIR WRITING MAP STEEL (FD/E6/MAP/12) (For item ser No 273 to 278) Material and labour for taking out unserviceable MS tubular frame of chair and Supply & fixing of new capsule pipe with necessary arrangements for fitting of seat and arms, as per existing size, shape and pattern, as directed.

Material and labour for prepartion of surfaces and welding to broken place and applying two coats of black enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for taking out unserviceable PVC arm 02 Nos of chair writing and supply fixing new all as per existing size, shape and pattern as directed.

Material and labour for taking out unserviceable Tapestry cloth of Seat & PU foam cushion and supply & fixing of new tapestry cloth & PU foam cushion of approved quality with PVC lipping all around including new hot pressed plywood 12mm for seat as directed.

Material and labour for taking out unserviceable MS flat fitted between seat and back and supply & fixing of MS flat cantilever type of size 25mm x 10mm in section for back fitted with seat as directed.

Material and labour for taking out unserviceable Tapestry cloth of back PU foam cushion and supply and fixing new tapestry cloth and PU foam cushion of approved quality with PVC lipping all around including new hot pressed plywood 12mm shall be formed contoured lumber support as directed.

TABLE BED SIDE MAP (FD/E6/MAP/15R) (For item ser No 279 to 286) Material and labour for table top made of 18mm thick prelaminated MDF board exterior grade ISI marked with 4 mm thick beading alround the top, complete all as shown on drawing and specified.

Material and labour for replacement damaged side of table bedside map with18mm thick prelaminated MDF board exterior grade ISI marked with 4 mm thick beading alround and fixed with screw.complete all as shown on drawing and specified .

Material and labour for replacements of old unsv back ply of table bedside map complete all as shown on drawing and specified .

Material and labour for replacements of old unsv drawer with new drawer made with18mm thick prelaminated MDF board exterior grade ISI marked with 4 mm thick beading alround the tray and telescopic channels fixed with screw.complete all as shown on drawing and specified .

Material and labour for replacements of old unsv lower drawer/box drawer with new drawer made with18mm thick prelaminated MDF board exterior grade ISI marked with 4 mm thick beading alround the tray and telescopic channels fixed with screw, complete all as shown on drawing and specified .

S& F of new chromium plated handle for drawer and box of table bedside map of good quality all as specified and directed.

Material and labour for replacement of damaged front/rear legs by 18 mm square tube of wall thickness 1.6 mm and paint with black color, complete all as per shown on drawing complete as specified and directed.

M & L for replacement of hard rubber shoe of black colour as per existing as approved.

CHAIR VERANDAH (FD-256, 359) (For item ser No 287 to 290) M&L for repair U/S parts of chair verandah and S&F new conduit pipe of size 20mmx1.6 G and fixing the same with electric running welding to chair verandah wherever required to the existing chair varandah complete all as specified and directed.

Material and labour for preparation of steel surfaces and filling cavities with putty including scrapping out old painted surface (external and internal) of chair Verandah and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer by spray painting complete all as specified and directed .

M&L for removing U/S plastic cane from chair verandah & recanning of the existing chair verandah with 4MM vide 1/2 Rd plastic cane good quality in Mat pattern as specified and directed. Make: SHAH/Primium.

Material and labour for supply and fixing of PVC shoes (04 Nos per chair) of chair verandah fixed to the legs, all as per drawing and as specified and directed.

CHARPOY TUBULAR STEEL JCOs (CEPZ/SK/06/08) (For item ser No 291 to 294) Material and Labour for replacement of 12 mm thick Plywood top on existing charpoy tubular steel after repairing of frame/charpoy. Plywood shall be 12 mm thick, commercial type, MR grade, ISI marked in single piece. Plywood shall be fixed to charpoy frame with and including nuts, bolts and screws complete all as specified in drawing and as directed.

Material and Labour for replacement stiffeners made of 25mm Sq MS tubular pipe 1.6 mm thick and welded to long rail horizontally (one end to each long rail) at equal distance including drilling holes where ever required for fixing plywood with bolts and painting to MS sq pipe pieces with two coats of black synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and as directed.

Material and labour for preparation of steel surfaces and filling cavities with putty on surface of CHARPOY TUBULAR STEEL JCOs and applying of paint, complete all as specified and directed .

Material and labour for replacement of hard rubber shoe of legs (04 Nos per charpoy) as per existing colour as approved, complete all as specified and directed.

BED HARD TUBULAR STEEL OFFRs (FD/E6/MAP/08(R)) (For item ser No 295 to 299) Material and Labour for replacement of 12 mm thick Plywood top on existing charpoy tubular steel after repairing of frame/charpoy. Plywood shall be 12 mm thick, commercial type, MR grade, ISI marked in single piece. Plywood shall be fixed to charpoy frame with and including nuts, bolts and screws complete all as specified in drawing and as directed.

Material and Labour for replacement stiffeners made of 25mm Sq MS tubular pipe 1.6 mm thick and welded to long rail horizontally (one end to each long rail) at equal distance including drilling holes where ever required for fixing plywood with bolts and painting to MS sq pipe pieces with two coats of black synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and as directed.

Material and labour for preparation of steel surfaces and filling cavities with putty on surface of Bed tubular steel Offrs and applying of paint, complete all as specified and directed.

Material and labour for replacement of hard rubber shoe of legs (04 Nos per charpoy) as per existing colour as approved, complete all as specified and directed.

Supply and fixing of prelaminated MDF board (exterior grade ISI marked) in both side front & back side of charpoy tubular steel.

RACK SHOE STEEL (FD/E6/MAP/02 (R) (For item ser No 300 to 303) Supply & fixing of 3mm thick MS rod in shelves of Rack Shoe Steel as longitudinal and transverse fixed with frame, as specified and as directed.

Material and labour for prepartion of surfaces and welding to broken place complete all as specified and directed.

Material and labour for preparation of steel surfaces and filling cavities with putty including scrapping out old painted surface (external and internal) of Rack shoe steel and applying two coats of synthetic enamel black paint over a coat of red oxide zinc chrome primer by spray painting, complete all as specified and directed .

Material and labour for fixing of 18mm dia hard rubber shoes (4 Nos per Rack) to legs, as per existing colour as approved, complete all as specified and directed.

CHARPOY FOLDING (FD-388(R)) (For item ser No 304 & 305) Material and labour for fixing of 12mm thick plywood in 02 pieces MR grade confirming to IS 303 will fixing with frame along with nuts, bolts & washers.

Material and labour for preparation of steel surfaces and filling cavities with putty including scrapping out old painted surface of charpoy folding and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer by spray painting, complete all as specified and directed .

M/S INDAN FURNITURE MART (BID ID -3492394)

M.B TUBE AND ALLIED IND. Contr (BID ID -3493005)

KALSI CONSTRUCTION CO (BID ID -3499858)

VEE KAY IND (BID ID -3495662)