COMPREHENSIVE REPAIR, REWIRING, REPLACEMENT OF INTERNAL LIGHT FITTINGS AND FIXTURES, POINT WIRING, SUBMAIN WIRING, MCB, MCCB OF RESTRICTED AREA OF 506 ABW UNDER GE (EAST) JABALPUR

Amount

Taking down carefully copper/aluminium point wiring (light, fan, power point or bell point etc) complete including fixture and fitting such as switches, ceiling rose holders & regulators light fittings etc. Removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition separately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site.

Taking down carefully copper/aluminium Sub Main wiring/service connection of any size from surface/connected/existing conduit of any height and removing material at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Taking down carefully any type of DBs including MCCBs and MCBs for keeping the old material into safe custody or for taking credit (credit for above items should be made as per condition separately) and making good to the disturbed surface etc complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC concealed conduit of white/ivory colour including all accessories after chasing in wall/ceilling etc and including 1.5 Sqmm FRLS PVC insulated stranded copper conductor cable for earth continuity conductor and connecting to earth dolly & to be terminated in & inclusive of MS sunken box 1.2 mm thick (flush metal box) with 3 mm thick laminated switch board cover for mounting of fittings like switch, socket , fan regulator etc complete all as specified and directed for the following.

One light point controlled by one switch

One ceiling fan point controlled by one switch

One exhust fan point controlled by one switch

One 3 Pin, 5/6 Amps socket outlet point, on the same board.

One 3 Pin, 5/6 Amps socket outlet point, on independent board . .

All as per item No 4 here- in-before but 2.5 Sqmm copper conductor for 5 Pin, 15 Amps switch socket combination on independent board and 2.5 Sqmm stranded copper conductor as earth continuous wire complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and existing concealed/open conduit including all accessories etc, and for one light /fan point controlled by one switch including 1.5 Sqmm FRLS PVC insulated stranded copper conductor cable for earth continuity conductor and connecting to earth dolly & to be terminated in & inclusive of MS sunken box 1.2 mm thick (flush metal box) with 3 mm thick laminated switch board cover for mounting of fittings like switch, socket, fan regulator etc complete all as specified and directed.

All as per item No 6 above but for One 3 Pin, 5/6 Amps socket outlet point, independent board with 1.5 Sqmm cable size etc complete all as specified and directed.

All as per item No 6 here in before but 2.5 Sqmm copper conductor for 5 Pin, 15 Amps switch socket combination on independent board and 2.5 Sqmm stranded copper conductor as an earth continuous wire complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty pvc concealed conduit of white/ivory colour including all accessories after chasing in wall/ceilling etc, heavy duty ISI marked with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly, covered with modular white cover plate with inner frame suitable for modular swithes, including PVC insulated multi stranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :-

One light point controlled by one, one way switch 5 Amps.

One fan point/exhaust fan point controlled by one, one way switch 5 Amps.

One 3 pin 5 Amps switch socket outlet point controlled by one, one way switch on the same board.

One 3 pin 5 Amps switch socket outlet point controlled by one, one way switch on independent board.

One bell point controlled by one bell switch 5 Amps.

All as per item No 8 here in before but using 2.5 Sqmm single core copper conductor cable of multistranded FRLS, PVC insulated unsheathed 1100 volts grade for 5/15 amps witch socket combination point including necessary running of 2.5 Sqmm copper conductor FRLS, PVC wire as earth continuity conductor alongwith wiring an connecting to the common earth dully, complete all as specified and directed.

S&F switch piano flush type 5/6 Amps, 230 Volts, single pole, one way, ISI marked complete all as specified and directed.

S&F bell push flush type 5 Amps complete all as specified and directed

S&F switch piano flush type 15 Amps, 230 Volts, single pole, two way, ISI marked complete all as specified and directed.

S&F 5 pin socket outlet, 5/6 Amps / 3 pin 5/6 Amps, flush type, ISI marked complete all as specified and directed.

S&F switch socket combination 2 in 1, 3 Pin, 5 Amps flush type, ISI marked complete all as specified and directed.

S&F switch socket combination 2 in 1, 3 Pin, 15 Amps flush type universal, ISI marked complete all as specified and directed.

S&F ceiling rose surface type PVC/Polycarbonate isolated body, 3 terminals complete all as specified and directed.

S&F electronic dimmers, 450 Watts, 250 Volts flush type on the existing phenolic laminated sheet etc as required complete all as specified and directed.

S&F for modular switch , one way, 5/6 Amps, single module complete all as specified and directed.

S&F for modular switch, one way, 15/16 Amps, single module complete all as specified and directed.

S&F modular Bell push 6 Amps single module complete all as specified and directed.

S&F modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amps and 2 pin, 5/6 Amps, 2 module complete all as specified and directed.

S&F modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amps and 3 pin, 5/6 Amps, 2 module complete all as specified and directed.

S&F for modular fan regulator step type, 120 Watts, 2 module suitable for 230 Volts, 50 Hz, AC supply complete all as specified and directed.

M&L Lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F Buzzer Electric Ding dong type suitable for operation on 230 Volts, 50 Hz, AC supply etc complete all as specified and directed.

M&L for Sub Main wiring (concealed type) in & including with approved colour as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc, one run of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and directed. Note :- Four runs (with Red/Yellow/Blue colour for Phase + Black colour for Nutral) of 6 Sqmm cable, one run ( with Green colour for Earth) of 6 Sqmm cable and one run of PVC conduit shall be measured as one unit.

M&L for Sub Main wiring (concealed type) in & including with approved colour as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc, one run of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and directed. Note :- Two runs (with Red/Yellow/Blue colour for Phase + Black colour for Nutral) of 6 Sqmm cable, one run ( with Green colour for Earth) of 6 Sqmm cable and one run of PVC conduit shall be measured as one unit.

M&L for Sub main wiring with approved colour as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 4 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc, one run of PVC insulated with 4 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and directed. Note :- Two runs (with Red/Yellow/Blue colour for Phase + Black colour for Nutral) of 4 Sqmm cable, one run ( with Green colour for Earth) of 4 Sqmm cable and one run of PVC conduit shall be measured as one unit.

S&F for highly efficient LED bulbs, 9 Watts used as a ready replacement for existing GL/CFL/direct fit lamp, in B-22 capacity complete all as specified and directed.

S& F LED lights fitting 1 x 9 Watts bulkhead luminaires including LED light driver, holder connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F round shape 12 Watts, 220 Volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 Watts, 220 Volts, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED lights fitting 1 x 20 Watts, 220 Volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilig rose complete all as specified and directed.

S&F for LED luminaire cool day light/warm white as required of size 1' x 4' square LED panel 35/36 Watts, 220 Volts recessed type with high efficiency PMMA diffuser soft glare free light complete with drovers, holders, LED lamp suitable for roof ceilling, including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F LED luminaire 600 mm x 600 mm, 35/36 Watts, 220 Volts, AC recessed type with high efficieny PMMA diffuser soft glare free light complete with drovers, holders, LED lamp suitable for roof ceilling, including connecting up with driver three core flexible copper conductor case of suitable size complete all as specified and directed.

S&F LED street light fitting 35 Watts, 230 Volts, AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP-65/66 protection complete all as specified and directed.

S&F energy saving environmental friendly and robust, open type vertical highbay long life, exclusive innovative die-cast aluminium IP-65/66 industrial light with high power COB LEDs as light source, suitable for highlighting retails space 100 Watts LED replacement metal halide industrial light luminarie complete with all accessories, connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed.

S&F for sheet metal enclosure MCB DB TPN 4 Way verticle type with 200 Amps rated bus bar 415 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.

S&F for sheet metal enclosure MCB DB SPN 8 Way vertical type with 200 Amps rated bus bar 240 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with and including one double pole MCB 20 Amps, 10 KA, 240 Volts complete all as specified and directed.

S&F MCB triple Pole and neutral rated capacity 63 Amps, 415 Volts, breaking capcity 10 KA "C" curve complete all as specified and directed.

S&F MCB single Pole and neutral rated capacity 40 Amps, 240 Volts, breaking capcity 10 KA "C" curve complete all as specified and directed.

S&F MCB single Pole and neutral rated capacity 6 to 32 Amps, 240 Volts, breaking capcity 10 KA "C" curve complete all as specified and directed.

M&L for dismantling of ceiling fan, segregation of unserviceable parts, cutting and removing out copper winding, cleaning the armature, rewinding of fan armature with appropriate gauge of super enamelled copper wire with necessary insulating materials such as vertex paper, cotton tape, PVC insulation tape etc varnishing with approved grade of insulation varnish and heating up, re-assembling the fan complete with greasing the same with approved grade of grease, making all electrical connection and fixing and connectiong on its existing position and testing on completion complete all as specified and directed.

M&L taking down & refixing after overhauling of ceiling fan of any make and sweep after opening and cleaning rotor bearing and stator properly and oiling/greasing of bearing/ bushes, reassembling the same, fixing and connecting on its existing position and testing on completion all as specified and as directed. Note- (i) Overhauling of ceiling fans will be carried out at AGE E/M Yard only. (ii) The spares required shall be measured and paid separately in the relevant items).

Supply, fixing and connecting up flexible copper wire twin core of 23/.075 complete all as specified and directed.

Supply only gun metal bush of any size (Make - MSP) complete all as specified and directed.

Supply only bearing for ceiling fan (Make - TATA/SKF No.6201/6202) complete all as specified and directed.

Supply only fan condensor 2.5 MFD (Make – USHA / UNIVERSAL) complete all as specified and directed.

Supply only split pin complete all as specified and directed.

S&F MCCB 415 Volts, 16 KA, 4 Pole, adjustable type, 63 Amps complete all as specified and directed.

S&F MCCB 415 Volts, 16 KA, 4 Pole, adjustable type, 100 Amps complete all as specified and directed.

S&F MCCB 415 Volts, 16 KA, 4 Pole, adjustable type, 125 Amps complete all as specified and directed.

S&F MCCB 4 Pole, 415 Volts, adjustable type, 160 Amps with breaking capacity 36 KA complete all as specified and directed.

S&F MCCB 4 Pole, 415 Volts, adjustable type, 200 Amps with breaking capacity 36 KA complete all as specified and directed.

S&F MCCB 4 Pole, 415 Volts, adjustable type, 250 Amps with breaking capacity 36 KA complete all as specified and directed.

S&F MCCB 4 Pole, 415 Volts, adjustable type, 320/350 Amps with breaking capacity 36 KA complete all as specified and directed.

S&F MCCB 4 Pole, 415 Volts, adjustable type, 400 Amps with breaking capacity 36 KA complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60 cm x 6mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50m deep below normal ground level connecting to and including GI earth wire of size 4.0 mm by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia medium grade pipe for protection of GI wire to the extent of 7.5m asearthing lead including charcoal dust and salt packed all around the earth plate in the earth pit all as per Electrical plate S.No 3 of SSR Part- I (2009) including PCC foundation/chamber in mix 1:2:4 type B1 with angle iron frame CI frame, CI cover with provision of locking arrangement and 20mm dia light grade GI pipe from top edge of the earth plate upto MS funnel with wire mesh provided inside the concrete earth pit for watering arrangement complete including excavation and earthwork in any type of strata and testing complete including fill up the earth pit with soil for best result and removal. Note :- Earth protection pipe & earthing wire upto and including 7.5m length is deemed included in unit rate quoted by the contractor.

M&L in repairs for air termination, single pointed aluminium rod 12 mm dia and 300 mm long including fixing arrangements complete all as specified and directed.

M&L in repairs for test point terminal block made of gun metal or phosphorus Bronze size 75 x 75 x 25 mm drilled and screwed including 3 Nos, 8 mm dia 25 mm long hexagonal head screw and brass bolts, nuts, washers suspended on down end earth conductor on insulator on either ends connected to existing aluminium or GI strip complete all as specified and directed.

S&F in repairs earth continuity conductor or main earth lead of aluminium strip 25 x 3 mm with saddles and fixing screw etc for roof conductors and down conductor above ground fixed to wall on batten or recess or ground for connecting earthing to various equipments as required complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 using 20 mm graded stone aggregate to fix angle post including fomwork complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to GI strip 32mm x 6mm main earthing lead by means of galvanized bolts, nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I (1991) with connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt around earth plate, PCC (1:3:6) type C-1 (using 20mm graded black trap/granite/Basalt stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4) type B-1 (using 20mm graded black trap/granite/Basalt stone aggregate) 50mm thick cover reinforced with 6mm dia bars 3 Nos both way with 12mm dia round bar handle, GI light grade watering pipe 20 mm dia with funnel and wire mesh, and 40 mm dia GI light grade earth lead protection pipe, complete all as specified and directed. Note :- Unit rate quoted is inclusive of earth lead and protection pipe upto 7.5 metre from earth plate.

S&F in repairs 'light grade' galvanised iron tube 40 mm bore with all fittings and fixed complete to walls / ceiling or laid in floor, pole or laid in trenches and road crossings including sealing ends with hession cloth impregnated with bituminous compound in ground and with teak wood bushes for ends fixed with walls / poles complete all as specified and directed.

S&F in repairs LED flood light fittings 30 Watts in connecting with cable from junction box to light fitting all as per required and directed by Engr-in-Charge.

S&F manually on load hange over switch 4 Pile, 630 Amps, 415 Volts complete all as specified and directed.

S&F manually on load hange over switch 4 Pile, 160 Amps, 415 Volts complete all as specified and directed.

S&F manually on load hange over switch 4 Pile, 200 Amps, 415 Volts complete all as specified and directed.

Schedule of credit amount of Rs. 52,704.00 to be deducted during AOC.

Sachdeva Enterprises (BID ID -3112314)

ELCON (BID ID -3111739)

M/S N K SONKAR (BID ID -3113924)

SHRI KRISHNA CONSTRUCTIONS (BID ID -3112972)