Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.9 LAccepted-AOC LANE NO 2 HOUSE NO 3 COL KEHAR SINGH COLONY KHUSROPUR JALANDHAR CANTT JALANDHAR PUNJAB 144005 | JALANDHAR | PUNJAB | 144005 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹38.8 L+₹8.0 L (25.8%)Rejected-Finance | L2 | Rejected-Finance L2 |
Tender Value
₹30.0 L
EMD Value
₹59,980
Closing Date
22 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (East) Jalandhar Cantt
Garrison Engineer (East) Jalandhar Cantt
CERTAIN MISC B/R REPAIRS TO OTM ACCN AND JCOS/ ORS MD ACCN AT HARIPUR RANGE AND JALANDHAR CANTT UNDER AGE B/R-I OF GE (EAST) JALANDHAR CANTT
2022_MES_525820_4
GE/JULL/ET-10/2022-23
Open Tender
Civil Works
Item Rate
273 days
Jalandhar Cantt
As per tender documents
8 documents required · 8 mandatory
₹500
Garrison Engineer (East) Jalandhar Cantt
₹59,980
Yes
12 Oct 2022
2 Sept 2022
29 Sept 2022
2 Sept 2022
22 Sept 2022
10 Sept 2022
Amount
Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed.
Material and labour for brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius and built in cement mortar (1:6) complete all as specified and directed.
All as per Srl item No. 2.00 here-in-before but except brick
Dismantling floor, hearth or wall tiling/ china mosaic and interlocking tiles including cement mortar bedding (but not backing), removing rubbish off outside MD land complete all as specified and directed.
Material and labour for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.
Material and labour for 25mm thick PCC (1:2:4) type B-1 using 12.5mm graded stone aggregate as in sub floors, sub base etc.; concrete surfaces finished fair and even and prepared to receive floor finish complete all as specified and directed.
Material and labour for 20 to 25mm thick machine cut Kota stone in flooring laid over and including 15mm thick screed in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the colour of stone slab including rubbing and polishing complete all as specified and directed.
Material and labour for 20 to 25mm thick machine cut Kota stone as in vertical surfaces, risers of steps, skirting, dado and pillars etc laid over and including 10mm thick rendering in cement mortar (1:4) jointed with grey cement slurry mixed with pigment to match the colour of stone slab including rubbing and polishing complete all as specified and directed.
Material and labour for non skid ceramic coloured tiles of size 300 x 300x 7 to 8mm thick in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed.
Material and labour for non skid ceramic coloured tiles of size 400 x 400x 7 to 8mm thick in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed.
Material and labour for glazed ceramic coloured tiles of size 450 x 300 x 7mm thick as in vertical surfaces i.e. skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including 10 mm thick in cement mortar 1:4 finished as in backing coat complete all as specified and directed.
Material and labour for vitrified ceramic tiles 10mm thick, any shade as approved, area of each tile n. exc. 0.36 Sqm (square/ rectangular) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including 15mm thick in cement mortar (1:6) finished rough to fix tiles complete all as specified and directed.
Material and labour for vitrified ceramic tiles 10mm thick, any shade as approved, area of each tile n. exc. 0.36 Sqm (square/ rectangular) in vertical surfaces such as skirting/ dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 10mm thick in cement mortar (1:4) complete all as specified and directed.
Taking down cement plaster/ terrazzo cast in situ of any description thickness including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.
Material and labour for rendering 15mm thick cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for rendering 15mm thick cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for 5mm thick cement plaster on ceiling in cement mortar 1:3 including finishing the surface even & smooth complete all as specified and directed.
Material and labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer and one coat of birla white putty complete all as specified and directed.
Material and labour for preparation of new plastered surface of wall and applying three coats of white washing complete all as specified and directed.
Material and labour for preparation of new plastered surface of ceiling and applying three coats of white washing complete all as specified and directed.
Material and labour for preparation of newly plastered or unplastered surface of walls including cornices, pillasters etc. and applying two coats of cement base paint complete all as specified and directed.
Material and labour for preparation of old decorated plastered or unplastered surfaces of walls and applying one coat of white wash complete all as specified & directed.
Material and labour for preparation of old decorated plastered or unplastered surfaces of walls and applying one coat of oil bound distemper complete all as specified & directed.
Material and labour for preparation of old decorated plastered or unplastered surfaces of ceiling and applying one coat of white wash complete all as specified & directed.
Material and labour for preparation of old decorated plastered or unplastered surfaces of walls and applying one coat of cement base paint complete all as specified & directed.
Material and labour for 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection, path etc finished even & smooth without using extra cement complete all as specified and directed.
Dismantling of AC sheets/ CGI/ Galvalume any thickness as in roof covering all as specified and directed.
Dismantling timber scantlings 40 sqcm and over in section, in any position, framed work, complete all as specified and directed.
Material and labour for 6mm thick asbestos cement fiber corrugated/ semi corrugated sheets as in roof coverings fixed with L-type or J-type hooks or cranked bolts complete all as specified and directed.
All as per Srl Item No. 29.00 here-in-before but except sheets
Material and labour for asbestos cement two piece adjustable ridge for corrugated or semi corrugated sheets 6mm thick fixed with L or J type hooks complete all as specified and directed
Supply and fixing Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.
Supply and fixing Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.
Supply and fixing 0.63mm thick galvanized corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 275 , fixed with L-type or J-type or cranked hook bolts in lieu of screws complete all as specified and directed
All as per Srl Item No. 34.00 here-in-before but except sheets
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
Supply and fixing rolled mild steel work roof trussed (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, Angle, Channel or Flat Sections) including distance pieces, cleats etc, Fe-410-W (Gde E-250) complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.
Supply and fixing false ceiling with Everest fiber cement designer tile ivory painted (high pressure steam cured) of 4mm thickness (as per IS : 14862) of size 595 x 595mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on interlocking meta grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main ‘T’ runner with suitably spaced joints to get required length and 15 x 32mm made from 0.3mm thick sheet and cross ‘T’ of size 15 x 32mm made of 0.30mm sheet, spaced between main ‘T’ at 600mm c/c to form a grid of 600 x 600mm and wall angle of size 15 x 20mm made of 0.30mm thick sheet and laying false ceiling tiles in the grid including, required cutting/ making, opening for services like diffusers, grills, light fitting, fixtures, smoke detectors etc. main ‘T’ runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin, etc with dash fasteners, GI adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main ‘T’ bottom exposed width of 15mm of all T-sections shall be center black pre-painted with polyester paint and having a load bearing capacity of 12 Kg/ Sqm complete all as specified and directed
Material and labour for cutting holes into for through brick wall exc. 150 sqm but n. exc. 400 sqcm built in cement mortar and making good in cement mortar (1:3) or concrete (1:2:4) type B-1 complete all as specified and directed.
Material and labour for dis-connecting existing tank of capacity exc. 250 litre but n. exc. 500 litre, setting aside (or lowering, if required) for repairs, cleaning and hoisting, re-connecting and re-fixing in position including making connections complete all as specified and directed. Note:- Write the date of cleaning and next date of cleaning of water tank on all new/old tanks after cleaning the tank
Material and labour for dis-connecting existing tank of capacity exc. 500 litre but n. exc. 1000 litre, setting aside (or lowering, if required) for repairs, cleaning and hoisting, re-connecting and re-fixing in position including making connections complete all as specified and directed. Note:- Write the date of cleaning and next date of cleaning of water tank on all new/old tanks after cleaning the tank
Supply and fixing rotational moulded polyethylene water storage tanks, 500 litre capacity (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I, fixed in repairs complete all as specified and directed.
Supply and fixing rotational moulded polyethylene water storage tanks, 1000 litre capacity (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I, fixed in repairs complete all as specified and directed.
Supply and fixing rotational moulded polyethylene water storage tanks, 2000 litre capacity (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I, fixed in repairs complete all as specified and directed.
Supply and fixing 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified and directed.
Supply and fixing in repairs 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified and directed.
Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.
Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.
Material and labour for 15mm bore galvanised steel tubes, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc complete all as specified and directed.
Material and labour for 20mm bore galvanised steel tubes, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc complete all as specified and directed.
Material and labour for refixing old tubing 15mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor complete all as specified and directed.
Material and labour for refixing old tubing 20mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor complete all as specified and directed.
Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area n. exc. 1.5 Sqm each door/ window complete all as specified and directed.
Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area exc. 1.5 Sqm but n. exc. 4 sqm each door/ window complete all as specified and directed.
Taking down shutters of any description exc. 1 Sqm and n. exc. 2 sqm complete all as specified and directed.
Material and labour for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. using steel conforming to Fe-410 Gde-E-250 complete including drilled for fixing of steel sheeting or other covering; doors, door frame chowkhats etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including necessary cutting drilling and welding etc complete all as specified and directed.
Material and labour for 35mm thick factory made plain framed, paneled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of veneered particle board 12mm thick with commercial veneering on both faces with rails and style of 2nd class hard wood. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.
Material and labour for 2nd class hard wood factory made glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed.
Supply and fixing factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and directed.
Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.
Supply and fixing Prayag Syment butt hinges 100mm long all as specified and directed.
Supply and fixing Prayag Syment tower bolt 200mm long all as specified and directed.
Supply and fixing Prayag Syment bow handle 125mm long all as specified and directed.
Supply and fixing 100mm size mild steel butt hinges medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.
Supply and fixing mild steel barrel tower bolt 200mm long stove enameled black with bright bolt and fixed complete all as specified and directed.
Supply and fixing mild steel pressed handles, oval type, stove enameled black 125mm size complete all as specified and directed.
Material and labour for mild steel sliding door bolts 300mm long stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.
Supply and fixing aluminium anodised, barrel tower bolts of extruded section and fixed, 100mm long all as specified and directed.
Supply and fixing extruded aluminium alloy handles, fabricated type, anodised, 125mm size, all as specified and directed.
Supply and fixing mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate welded to steel frame/ screwed to wooden frame complete all as specified and directed.
Supply and fixing in repairs mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate welded to steel frame/ screwed to wooden frame complete all as specified and directed.
Supply and fixing in repair steel window/ ventilator glazed and gauged (combination) with side hung/ top hung shutters including box type/ projecting type hinges, and steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame including guard bars and necessary cooler arrangement in window complete as per Drg No. CEJZ/TD-1020/08 sheet 1/3 to 3/3 complete all as specified and directed. Note : Window/ ventilator glazed and gauged (combination) are fixed on site and net opening of window/ ventilator are measured one time only to paid to contractor
Material and labour for galvanised mild steel wire cloth 0.48 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
Material and labour for in repair galvanised mild steel wire cloth 0.48 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
Material and labour for hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones complete all as specified and directed.
Material and labour for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc. 0.50 sqm in each pane complete all as specified and directed.
Material and labour for 3mm thick figured glass, pin head type and glazing with oil putty in squares n. exc. 0.5 sqm in each pane complete all as specified and directed.
Material and labour for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Material and labour for preparation of old treated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and directed.
Material and labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Material and labour for preparation of old painted steel surfaces of any description over 10cm width or girth & applying one coat of synthetic enamel paint of approved quality, tint to achieve glossy finish complete all as specified and directed
Demolition of cement concrete of any description and in any position not otherwise specially provided for sunken floor complete all as specified and directed.
Material and labour for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base or foundation filling, mass concrete etc complete all as specified and directed.
Material and labour 60mm thick machine pressed precast concrete inter-locking paver blocks any shape and size conforming to IS 15658-2006, M-35 grade, with grey cement and pigment, laid in floor/ path/ hard standings in any pattern as approved, laid over sand cushion and interstices filled with sand using plate vibrator laid over and including 40mm thick sand cushioning complete all as specified and directed.
Material and labour for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands plinth courses, roof kerbs or mud stops, benching, coping, bed plates, parapets, water through and the like etc including weathering, slightly rounded or chamfered angles throating, edges of interlocking/ chequered tiles etc complete including necessary form work complete all as specified and directed
Supply and fixing in repair vitreous china squatting pan Orissa pattern size 580 x 440mm white with front or back inlet, integral foot rest (excluding flushing cistern and flush pipe) fixed including provision of lime concrete bedding etc complete all as specified and directed.
Supply and fixing in repairs vitreous china wash down water closet pan (pedestal pattern) white including plastic water closet sheet cover white, closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device and including mild steel chromium plated jet fixed to water closet with 15mm dia and 1.2m to 1.5m long flexible pipe complete all as specified and directed.
Supply and fixing in repair PVC connection 15mm bore size with PTMT nuts of length 450mm complete all as specified and directed.
Supply and fixing in repair new flexible PVC waste pipe of approved quality 32mm bore, 75cm long with one end socketed fixed to waste coupling including one PVC reducer 32mm complete all as specified and directed
Supply and fixing in repairs 32mm dia waste coupling of PTMT (half or full threaded), (minimum weight 45 gms) complete all as specified and directed.
Supply and fixing in repair vitreous china wash hand basin, white, flat back 630 x 450mm excluding taps, waste chain and plug and porcelain stopper fixed on existing brackets complete all as specified and directed.
Supply and fixing in repairs MS 25mm pipe outer dia of curtain rod with powder coated fixed in the MS hook and shade complete all as specified and directed
Material and labour for second class hardwood in scantlings, timber fixed, clean sawn complete all as specified and directed.
Supply and fixing stop valves 15mm bore, cast copper alloy, screwed down with high pressure with crutch or butterfly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete, fixed in repairs, complete all as specified and directed.
Supply and fixing stop valves 15 mm nominal bore, cast copper fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket, fixed in repairs complete all as specified and directed.
Supply and fixing in repair bib tap cast copper alloy chromium plated suitable for 15mm bore iron pipe with long body fancy type complete all as specified and directed.
Supply and fixing in repairs pillar tap, cast copper alloy chromium plated, with capstan heads, 15mm bore dia of pipe screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.
Supply and fixing in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, bracket PVC short bend etc. complete all as specified and directed.
Supply and fixing in repair grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.
Supply and fixing in repairs towel rail 20mm dia, D type, 600mm long between flanges fixed complete all as specified and directed.
Supply and fixing in repair brass chromium plated shower rose of 125mm size and 15mm dia with or without swivel joints including fixing to steel pipe or union complete all as specified and directed.
Supply and fixing in repairs 75 mm dia PVC floor trap, with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc., including cleaning for refixing or removal to store complete all as specified.
Supply and fixing in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.
Supply and fixing in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall, laid in trenches or in floors complete all as specified and directed.
Supply and fixing PVC (SWR) bends any radius 110mm bore all as specified and directed.
Supply and fixing PVC (SWR) bends any radius 75mm bore all as specified and directed.
Material and labour for petty repair to steel rolling shutter of any size and any description including repairing of ball bearing, top cover, anchoring rod, hasp and staple, gear operated system, crank handle, chain wheel and hand chain including necessary welding, greasing etc and making the shutters serviceable complete all as per existing pattern as specified.
Supply and fixing in repairs safety lever locks mils steel with 4 levers for rolling shutter complete all as specified and directed
Supply and fixing in repair collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc. as specified erected in position and securing runners with holdfasts and brackets complete as specified and directed.
Supply and fixing hollow PVC wall lining consisting of 5 mm thick wood grain/ any colour PVC sheet including solvent cement and fixing on to wall as specified and drawing and manufacturer instruction, complete all as specified and directed.
Material and labour for cement concrete tiles 25 cm x 25 cm x 22 mm thick, machine pressed with grey cement and pigment; set jointed and pointed in neat cement slurry in floors, and cut and polished over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.
Supply and fixing vitreous china urinal, flat back, half stall type white/ ivory colour, with grating and union for discharge including connection to flushing pipe and outgoing waste pipe, complete all as specified and directed.
COSMO BUILDERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .