SED/23/2022-2023

Amount

Earth work excavation in hard stiff clay, stiff black cotton soil, hard red earth shales murram, gravel stoney earth and earth mixed with small size boulders and hard gravelly soil for foundation and depositing on bank with an initial lead of 10 meters and lift of 2 meters complete

Plain cement concrete 1:4:8, Using 40 mm HBG machine crushed metal for foundation padding concerete/levelling course including cost of cement all materials,labour,lead,lift curing etc., complete.

Random rubble masonry in CM 1:5 mix using good quality rough stone for foundation and basement including cost of all materials lead and lift etc., complete.

Flush pointing with CM 1:3 for RR walls including cost of materials, labour, lead, lift and curing etc complete.

Refilling the gravel other than sand in basement sides and including cost of all labour, lead, lift, etc complete.

Brickwork in cm 1:5, using good quality country brick of size 23x11x7 cm including cost of all materials labour, lead, lift, curing and Transporting charges etc complete.

plastering with cement mortar 1:5 12mm thick for walls including cost of all materials labour charges scaffolding, finishing curing etc., complete.

RCC 1 : 1 1/2 : 3 slabs for plain surfaces strutting upto 3 Mtr high using MS sheets of size 90CM x 60CM gauge stiffened with welded MS angle of size 25mm x 25mm x 3 mm laid over siver C.W Joints of size 10CM x 6.5CM (Spaced at about 90CM c/c)

Supplying, fabricating and placing of MS/RTS steel reinforcement for RCC works including cost of cutting, bending, tying and Fixing in position as per specification including cost all materials lead lift cost of binding wire etc complete.

Fabrication and supply and fixing of MS steel door with frame of size 40x40x6mm angle and shutter frame of size 35x35x6mm angle using 18 gauge MS sheet 6 nos holdfasts with all fittings including cost of all materials labour, lead, lift priming coat earth.

Supplying and fixing of fully Glazed steel window with outer frame of size 35x35x6mm MS angle and shutter frame of size 25x25x5mm with 10 Nos 12 mm dia MS rod as per the standard specification including cost of all materials , fabrication and transport.

White Washing one coat with Emulsion paint including cost of all materials labour lead, lift, scaffolding etc., complete.

Colour washing two coats interior walls by using approved quality emulsion paint with suitable colouring pigments including cost of all materials, labour, lead, lift curing etc complete.

Colour washing two coats exterior walls by using approved quality emulsion paint with suitable colouring pigments including cost of all materials, labour, lead, lift curing etc complete.

Painting Two Coats with approved quality of enamel paint over red oxide prrmer for new iron work including cost of all materials, Lead, lift, etc. complete.

Supplying and fixing of 110 mm dia PVC pipe of 4kg/cm2 pipe including all accessories etc complete.

Wiring with 2x 1.5 sqmm (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitablePVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point / Fan point (For Electronic regulator)

Supplying and fixing of 5A/15A 3pin combined flush type wall socket with 15A flush type switch on suitable TW Box.

PCC 1:2:4 mix using 10 to 12 mm HBG (MC) metal including cost of all materials, labour charges, curing, lead, lift, etc., complete.

Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting.