Repair, renovation of divisional office and Govt quarters of RTIC department at D-16 including installation of aluminum cabin in the divisional office

Amount

Labour engaged for removal of wooden partition, walls scaping of doors, winbdows and shifting if items

Carpenter

Labour

Painter

Removing white or colour wash by scraping and sand for papering and preparing the surface smooth incl necessary repairs to stratches etc complete

Distampering with 1st quality arcylicx/ oil bond washable distamper (redy made) having VOC content less than 50 grms/ ltr of approved manufacture and required shade and colour complete as per manufacture specification one or more coats on old work

Finishing walls with water proofing cement paint of required shade. New work ( two or more coats ) applied @3.84Kg/10sqm

Finishing walls with water proofing cement paint of required shade. Old work ( two or more coats ) applied @2.20Kg/10sqm Complete

Polishing on wood work with ready mix wax polish of approved brand and mafucture on old work

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shade to give an even shade. (two or more coats) on old work

Demolishing cement concrete manually /by mechanical means including disposal of material within 50 m lead .In 1:3:6 or richer mix.

P/L in position cement conc. of specified grade excluding the cost of centering and shuttering. All work upto plinth level.

1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size ) crushed

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate

Structural steel work in single section,. Fixed with or withoput connecting plate, including cutting, hosting, fixing in position and appling primeing coat of approved steel primer all complete

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 mtr : lead In cement mortar.

Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m ( stacks of cleaned bricks shall be measured) From brick work in cement mortar.

Brick work with common brunt clay (Non modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortr 1:4 ( 1 cement : 4 coarse sand )

Extra for brick work in superstructure above plinth level upto floor v level

Demolishing RCC Work manually /by mechnical means including stacking of steel bars and disposal of unserviceable material within 50 Metres lead

12mm cement plaster of mix 1:4 ( 1 cement : 4 coarse sand )

Repair to plaster of thickness 12MM to 20MM in patches of area 2.5 Sqm & under including cutting the patch in proper shape raking out joints & preparing & plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50M lead with cement mortar 1:4 (1 cement : 4 coarse sand)

Renewing glass panes and refixing existing wooden fillets. Float glass panes of thickness 4.0MM (weight not less than 10Kg per Sqm

Centering and shuttering including strutting propping etc and removal of form for : Walls any thickness including attached pilasters buttresses plinth and string course etc.

Suspended floors, roofs, landings, balconies & access platform

Edges of slab & breaks in floor & walls under 20 Cms wide

Clearing grass and removal of rubbish up to the distance of 50M out the peripehry of the area cleared

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level.

1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregat 40mm nominal size ) crushed.

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coatof neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.50mm thick with 12.5mm nominal size stone aggregate.

Providing & fixing sanitary work including cistern, urinal wall hang, ostern WC with supply pipes & complete installation PVC water tank complete job

Carriage/disposal of mulba average distance 5 Km

Providing and fixing aluminium work for doors, windows,ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia. and size : 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber Ineoprene .. gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing I panelling, C.P. brass I stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- Charge (glazing, panelling and dash fasteners to be paid for separately.)Anodised aluminium (anodised transperent or dyed to required shades accorind to IS 1868 mimimum anodic coadting of grade AC15)

For shutters of doors, windows & ventilators including providing and fixing hinges I pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber I neoprene gasket required (Fittings shall be paid for separately.) Anodised aluminium (anodised transperent or dyed to required shades accorind to IS 1868 mimimum anodic coadting of grade AC15)

Providing and fixing 12mm thick prelaminated particle boardflat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-l type-11) in panelling fixed in aluminium doors, windows shutters and partition frames with C. P. brass I stainless steel screws etc.complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber I neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item.) With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg per sqm)

Providing and Fixing Aluminium body tubular type universal hydrualic door closer (Superior Brand) with necessary accessories and screws etc complete. ( To be paid as per actual )

Providing and fixing aluminium hanging floor door stopper lSI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo em,possed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot" and single piece M.S. sheet outer box with slide plate etc. complet~ as per the direction of Engineer-in- charge. With Stainless Steel cover plate minimum 1.25 mm thickness.

Providinq and fixing bright finished brass 100 mm mortice latch and lock lSI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as .. per IS : 1868) aluminium lever handles with necessary screws etc. complete, best make of approved quality.

Carriage of material by Mech Transport from source to site of work including loading, unloading and stacking

Sand and agg average diatance 20 Kms

Brickks average diatnce 10 Km

M/S BHARAT BHUSHAN KHAJURIA

Shri Bharat Bhushan Gupta