753035A ADDN / ALTN AND SPL REPAIR TO CERTAIN OTM AND MARRIED ACCN UNDER GE (AWC) MHOW

Item No 01 : Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) applied to cutting through full thickness of floors and pavings complete all as specified and directed

Item No 02 : Demolition of un-reinforced cement concrete in ground floors, paving and sunken floors exceeding 15 cm thickness applied to cutting through full thickness of floors and pavings complete all as specified and directed

Item No 03 : Dismantling of floor, hearth, walls, roof tiles including bedding (but not backing), and rubbish off permises complete all as specified and directed.

Item No 04 : Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc complete all as specified and directed.

Item No 05 : M&L for Post construction Anti termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and directed.

Item No 06 : M&L for Treatment of soil using emulsion for Post construction Anti termite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in plinth protection or apron complete all as specified and directed.

Item No 07 : M&L for Post construction Anti termite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 ltr per hole by drilling 6mm dia holes at a downward angle of 45° @ 150mm centre to centre and sealing the same complete all as specified and directed

Item No 08 : M&L for 10 mm thick Double Charged Light shade vitrified ceramic tiles in floors, not exceeding 0.36 sqm set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. Note :- (a) The rates are exclusive of bedding layer or screeded surface but include for setting and jointing the tiles in cement paste or slurry. (b) The rates include for all straight cutting and waste. Raking or circular cutting and waste shall be measured separately.

Item No 09 : M&L for 10 mm thick Double Charged Light shade vitrified ceramic tiles in skirtings/ vertical surfaces, not exceeding 0.36 sqm set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. Note :- (a) The rates are exclusive of bedding layer or screeded surface but include for setting and jointing the tiles in cement paste or slurry. (b) The rates include for all straight cutting and waste. Raking or circular cutting and waste shall be measured separately.