Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.7 LAccepted-AOC 02 PADRI SHIV NAGAR SHIV NAGAR MAHARAJGANJ UTTAR PRADESH 273303 | MAHARAJGANJ | UTTAR PRADESH | 273303 | L1 | Accepted-AOC ACCEPTED BEING LOWEST BIDDER | |
| 2 | L2₹32.8 L+₹1.1 L (3.55%)Rejected-Finance | L2 | Rejected-Finance REJECTED BEING NOT LOWEST BIDDER | |
| 3 | L3₹39.2 L+₹7.5 L (23.8%)Rejected-Finance AT POST SONAJ TAL MALEGAON DIST NASHIK | MALEGAON | NASHIK | MAHARASHTRA | L3 | Rejected-Finance REJECTED BEING NOT LOWEST BIDDER | |
| 4 | L4₹41.2 L+₹9.5 L (30.2%)Rejected-Finance | L4 | Rejected-Finance REJECTED BEING NOT LOWEST BIDDER | |
| 5 | L5₹41.6 L+₹9.9 L (31.4%)Rejected-Finance | L5 | Rejected-Finance REJECTED BEING NOT LOWEST BIDDER |
Tender Value
₹49.8 L
EMD Value
₹99,520
Closing Date
8 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE KIRKEE
Headquarters CWE Kirkee, Military Engineer Services, Range Hills Road, Kirkee, Pune-411003
COMPREHENSIVE MAINTENANCE TO OFFRS MD ACCN AT BEG AND CENTRE UNDER AGE B/R-II IN GE (CENTRAL) KIRKEE
2023_MES_579694_1
CWE/KKE/TOKEN-71 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
KIRKEE
AS PER TENDER
6 documents required · 6 mandatory
₹500
Yes
GE CENTRAL KIRKEE
₹99,520
Yes
13 Apr 2023
8 Feb 2023
11 Mar 2023
8 Feb 2023
8 Mar 2023
23 Feb 2023
9 Feb 2023 - 15 Feb 2023
Amount
Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings
M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L-type or J- type or cranked hook bolts complete.
As per item No 2 above but except AC sheet
M&L for Asbestos cement two- piece adjustable plain wing ridge 6mm thick fixed with L-type or J- type or cranked hook bolts complete.
Dismantling of Plain or corrugated/galvalume steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings
S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S& F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, roof covering/cladding to wall, fixed with self tapping screws as specified
S&F for 0.63 mm plain Galvanised, mild steel sheeting, in ridges, hips, valley Gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275. fixed with self tapping /coach screws as specified
Dismantling of single layer Mangalore pattern or similar tiles in roof coverings
S & F roof tiles, Mangalore pattern, inter locking at side joints laid dry
Ditto as per ser No 10 above except tiles
S & F ridge or hip tiles to suit Mangalore pattern of roofing tiles bedded and jointed in CM 1 : 6
Dismantling battens for tiles singles etc of any size including tiling fillets spaced exc 15 cm complete
S&F second class hard wood clean sawn battens at 30 cm centre to centre and section area exceeding 15 and not exceeding 25 sqcm
As per item No 14 but except battens complete
Removing of old water proofing treatment and cleaning the surface of slab and clearing with wire brushes, removing dust, foreign material, rubbish off the site to a distance n.exc. 100m complete all as specified and directed
M&L for 10 mm thick screed bed in cement mortar 1:3 on RCC roof slabs mixed with water proofing compound @ 3% mixed with by weight of cement finishing even and smooth to receive water proofing treatment complete without using extra cement all as specified and directed by Engineer-in-Charge. Note : WPC shall be measured and paid separately.
M&L for water proofing treatment over RCC slab by applying oil based bituminous primer surface @0.30 Kg/sqm and laying 3mm thik APP modified water proofing polymeric membrane with 100 mm side and end lap having weight not less than 3.50 kg/ sqm , reinforced with with non-woven polyster reinforced matt weighing not less than 160 gms/sqm polyster core having soften point not less than 1500C, longitudinal tensile strength not less than 650 N/5cm, by torching method and applying a coat of solar reflective aluminium paint @ 0.15 Kg/Sqm on membrance surface including 24 hrs ponding test complete all as specified and as directed by the Engr-in Charge
Supply only integral water proofing compound
Taking up or down 15 mm bore tubing and connections, including cleaning for refixing or removal to store
Taking up or down 20 mm bore tubing and connections, including cleaning for refixing or removal to store
Refixing 15 mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as directed.
Refixing 20 mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as directed.
S&F tubes 15mm bore medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified.
S&F tubes 20 mm bore medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified.
Cutting chases, pinning & making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in stone/ concrete block walls complete.
M & L for preparing plastered or unplastered old surfaces of wall including brooming down or scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spot and applying one coat of white (lime) wash on wall complete all as specified and directed.
All as specified in item No 27 above but applying one coat of white (Lime) wash on ceiling.
M & L for preparing plastered or unplastered old surfaces of wall including brooming down or scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spot and applying one coat of cement based paint (any tint) on walls complete all as specified and directed.
M & L for preparing plastered or unplastered old surfaces of wall including brooming down or scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spot and applying two coat of cement based paint (any tint) on walls complete all as specified and directed.
M & L for preparing plastered or unplastered old surfaces of wall including brooming down or scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spot and applying one coat of dry distemper (any tint) on walls complete all as specified and directed
M & L for preparing of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint of any tint all as specified and directed.
M & L for preparing of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applyinbg one coat of synthetic enamel paint any tint all as specified and directed.
M & L for preparing plastered or unplastered old surfaces of walls and applying one coat of plastic emulsion complete all as specified and directed
M & L for complete removal of existing treatment of wall and applying two coat of distemper oil emulsion(OBD) over a coat of primer on wall surfaces complete.
M & L for preparing of old undecorated surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed
M & L for complete removal of existing treatment on wall surfaces of any description including brooming down with steel wire brushing, scrapping down smoke soot's , moulds, moss and efflorescence, salts, trading oil and greasy spots etc and applying two coats of Anti fungal weather proof grade exterior acrylic emulsion paint of approved tint (Apex Ultima Protek Asianpaints, Nerolac excel top guard, Berger weathercoat long life 10 or equivalant brand as specified in CA) over a coat of weather proof primer including filling the cracks etc with crack filling material all as per manufacturers instructions complete all as specified and as directed.
Dismantling of wall and ceiling boards (fibre,pulp insulation, AC etc), any thickness including cover fillets complete.
S&F interlocking aluminium alloy anodised snap grid consists of main Tee runners of size 38mm x25mm x1.5mm spaced 1200mm centre to centre and cross Tee of size 25mmx25mmx 1.5mm, 1200mm long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mmx600mm and provide a secondary cross tee 25mm x1.4mm ( of length 600mm) to be interlocked of the centre of 1200mmx600mm panel to form a grid of 605mmx605mm and wall angle 25mmx25mmx 2mm. Aluminium alloy extruded section shall be aluminium anodised (minimum 15 micron ) and shall conform to IS 733, IS 1285 and IS 737. including Hangers of GI wire 6mm dia to be fixed by approved rawl plug, level and justers and screws etc.
M&L for 8-12 mm thick Gypsum board/tiles for insulation and accoustic purposes, 60cmx60cm in size , fixed with nails to timber frame work or with staples on snap grid in ceiling.
Dismantling timber framed work scantlings 40 sq.cm and over in section, in any position.
Ditto as per ser No 41 above but in fillets, rails, posts, rafters,purlins etc under 40 sq. cm in section.
S&F for 2nd class hard wood timber framed and fixed clean sawn in scantling all as specified and directed.
M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces including all necessary preparation over 10 cms width or girth.
Demolition of reinforcement cement concrete of any description and in any position not otherwise specifically provided for
S&F for Providing precast cement concrete louvres and jallies, 35 mm thick (measured solid), including all mouldings using cement concrete type B0 1:2:4 (12.50 mm graded aggregate) set in cement mortar 1:4 complete.
M & L for preparing new plastered surfaces on walls /jallies applying two coat of cement base paint complete all as specified and directed.
Demolition of cement concrete unreinforced in ground floors and pavings n.exc. 15cm thickness below or above ground level all as specified.
M&L 40mm thick PCC type B1 (1:2:4) 20 mm graded stone agg in floor finished fair, even and smooth without using extra cement.
M & L 75mm thick PCC type C2 1:3:6 (using 40mm graded aggregate) as in plinth protection
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe incl bedding in cement mortar to dwarf wall or cantilever brackets and connecting union to pipe overall size 915x460mm, bowl size 410x330x160mm.
Demolition of stone slabs/flooring of any description laid bedded and pointed any mortar and all as directed.
M & L for Granite slab machine cut for 20 to 25 mm thick bedded and jointed with colour cement to match cut to shape required all as specified and directed.
S&F marble slab baroda green 16-18 mm thick (pre grinded and polished ) bedded jointed and painted with grey cement slurry incl cutting and grinding /poished incl 15mm in cm 1:6bedding layer. The edges should be rounded and stone should be in one piece complete all as specified and directed by Engr-in-charge.
M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including M&L for screed bed or bedding layer 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed by Engr-in-charge.
Ditto as per ser No 55 but on step riser skirting over and including 10mm thick rendering in CM (1:4) complete all as specified and directed by Engr-in-charge.
M&L for Kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed by Engr-in-charge.
Ditto as per ser No 57 but on step riser skirting over and including 10mm thick rendering in CM (1:4) complete.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations.
Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles in store rubbish of the premises complete all as specified and directed by Engr-in-charge.
M&L for vitrified ceramic tiles 10 mm thick light shade, (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over 15 mm thick screed bed in CM (1:6) complete all as specified and directed by Engr-in-charge.
M&L for Vitrified coloured tiles in vertical/skirting surface 10 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster (1:4) as backing coat complete all as specified and directed by Engr-in-charge.
M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding .11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed by Engr-in-charge.
M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over 15 mm thick screed bed in cement mortar complete all as specified and directed by Engr-in-charge.
M&L for Glazed ceramic coloured tiles in vertical surface 450 X 300 7 mm or equivalent thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster (1:4) as backing coat complete all as specified and directed by Engr-inCharge.
M&L for 25 mm thick Cement concrete in level course for receiving floor tiles using Type B1,1:2:4 (20 mm graded aggregate) complete all as specified and directed by Engr-in-charge.
S & F in repairs Aluminium body, door closer hydraulically regulated designation N0. 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.
S&F for powder coated anodised aluminium ventilator shutters, fixed type without sash bar including stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm , aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.and fixed to stone masonry wall including demolition of RCC jali ventilators complete all as specified and directed by Engr-in-charge.
Demolition of precast concrete block /brick work walling built in cement mortar complete all as specified and directed by Engr-in-charge.
Taking down cement plaster on wall /concrete surface etc including racking out joints hacking for key scrubing down with water etc complete all as specified and directed by Engr-in-charge.
M&L for Precast cement concrete block masonry using type C1 1:3:6 (20 mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar 1:6 complete all as specified and directed by Engr-in-charge.
M&L for rendering 15 mm thick on faces of brick/ PCC block masonry wall using cement plaster 1:4 and rendering is to be finished even and smooth (without using extra cement) complete all as specified and directed.
M & L preparation of newly plastered surface and applying two coat of cement base paint on wall etc complete all as specified and directed
M & L for rendering 15mm thick on fair faces brick work /PCC block masonary or concrete surface of wall using cement plaster 1:6 and finished even and smooth (without using extra cement) complete
M & L preparation of newly plastered surface and applying two coat of oil bound Distember over a coat of primer on wall etc complete all as specified and directed
S & F in repairs Health faucet, brass chromium plated,all as per Cat Part No BEA-95 of Prayag or equivalent makes specified in PS fixed to wall as per manufacturers instructions complete all as specified and as directed.
S & F in repairs Soap dish, brass chromium plated,all as per Cat Part No BA-45 of Prayag or equivalent makes specified in PS fixed to wall as per manufacturers instructions complete all as specified and as directed.
S & F in repairs Wall mixer, three in one, brass chromium plated, with complete accessories all as per Cat Part No PIS-70H of Prayag or equivalent makes specified in PS fixed to wall as per manufacturers instructions complete all as specified and as directed.
S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide (corner/wall) with chromium plated bracket guard and with CP aluminium railing complete all as directed by Engr in charge
S & F in repair towel ring, brass body, glossy finish complete all as per Cat No BA-02 of Prayag or equivalent make as specified in PS all as specified and directed.
S & F in repair rotational moulded polyethylene water storage tanks triple layered capacity 500 ltrs ( cylindrical vertical with closed top ) hoisted and fixed in position.
S & F in repair rotational moulded polyethylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.
S & F in repair provision of Ball PVC valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in 20 mmdia of the pipe
S & F in repair fancy type MS curtain rod powder coated 20mm dia with wall thickness not less than 1mm ( of approved colour and design) including bracket (latto) and wall face support bracket fixing to walls with MS full screws (including fixing of wooden pieces of required size of walls) all as specified and directed
Taking down Chowkats or frames with shutters without taking of shutters from the frames exc 1.5 Sqm but not exc 4 Sqm each including all as specified and directed
Taking down Chowkats or frames with shutters without taking of shutters from the frames not.exc 1.5 Sqm each all as specified and directed
Taking down shutter exc. 1.00 Sqm but n.exc. 2.00 Sqm each and removing from site complete all as directed by Engineer-in-Charge.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown on Page No. 160 of SSR 2010 part II.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitabe PVC sheet beading, and joined together with solvent cement, supplying & fixindg in the frame at site as per specifiction & drawing.
S&F factory made shutter 35mm thick, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated
S & F 35mm thick 2nd class HW glazed or skeleton shutter open rebated divided into square with plainchamfered or rounded mitred and rebated without sash bar and prepared to receive gauze or glaze, size of members as clause 8.20 (a) of SSR pt-1
S&F 30mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F for Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.
M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces including all necessary preparation over 10 cms width or girth.
S & F stainless steel 100 mm size butt hinges, medium weight complete all as specified and as directed.
S & F aluminium handles 150 mm long, cast type anodised complete all as specified and as directed.
S & F aluminium anodised barrel tower bolt 200mm long complete all as specified and as directed.
S&F for stainless steel sliding door bolts, plate type, with stainless steel bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm long
S&F flat iron 25x3mm thick conforming to Fe-290, Gde E-165 in holdfasts.
S & F in repair bib taps 15mm dia, cast copper alloy chromium plated, with CP flange complete all as specified and as directed.
S & F in repair bib taps 15mm dia, cast copper alloy chromium plated, long body, with CP flange. complete all as specified and as directed.
S & F in repair stop valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle,15mm bore size screwed both ends for iron pipe or for unions and fittings complete all as specified and as directed.
S & F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC(SWR) 'P' or 'S' trap connecting to flush pipe and to anti syphonage pipe, complete all as specified and directed.
S & F in repair brass chromium plated overhead shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.
S & F in repair gun metal gate or globe valves 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified.
S & F in repair Plastic water closet seat cover, coloured, for pedestal pan closed pattern with flat bottom,and cover with mild steel chromimium plated or aluminised hinging device complete all as specified and directed.
S & F in repair PVC valveless, syphonic action type, flushing cistern, 10ltr capacity,low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever,complete all as specified and as directed.
S & F in repair Vitreous china wash basin white flat back size 580x450 mm excluding taps but including 32 mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets all as specified and directed.
S & F in repair PVC connections 15 mm size with PTMT nut of length 450 mm all as directed.
S & F in repair 15 mm bore Pillar taps, cast copper alloy fancy type, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.
S & F in repair Galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples including necessary beading all as directed by Engr - in - Charge
S & F in repair Brass chromium plated Jet spray 15 mm dia including fixing to steel pipe complete all as specified and as directed.
S & F in repair PVC (SWR) floor trap 75mm bore plain with grating including jointing with solvent cement. complete all as specified and as directed.
S&F in repairs Tubular towel rail, 20mm dia, 60 cm long complete all as specified and as directed.
S&F for powder coated aluminium sliding windows having three Nos of tracks including one wire glazed shutters for mosquito proofing including stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm and two Nos glass shutters including 4mm thick coloured glass and aluminium section weight n.less than 0.55 Kg/RM including necessary cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, suitable handles, locking arrangement and fixed to stone masonry wall complete.
Supply and fixing powder coated aluminium door made out of hollow extruded aluminium section as mentioned below. Each door having 02 Nos disc or D type handels, 02 Nos aluminium tower bolts 200 mm size one aluminium sliding door bolt or 250mm size, one brass mortice lock of six levers with key in duplicate regulated by double action hydrolic floor door spring (Make Sandhu/TITZ) shutter to be partly glazed with 5 mm thick tinted glass and partly paneled with 12 mm thick pre laminated particle board fixed with glazing clips, rubber beading/gasket anodized aluminium beading screws complete. Chowkhat Frame : 101.60x44.45x1.55 mm Shutter verticle/stile: 85.00x44.45x1.56 mm Shutter middle rail : 83.50x44.45x1.54 mm Shutter top and bottom rail : 110x44.45x1.54 mm
S & F in repairs 75mm bore PVC(SWR) pipe, type 'B' single socketed in any length with rubber ring joints laid in trenches or floors all as specified and as directed.
S & F in repairs 110 mm bore PVC (SWR) pipes, type 'B' single socketed in any length with rubber ring joints fixed to wall including PVC clamps and necessary fittings fixed in repairs complete all as specified and as directed.
S & F in repairs PVC (SWR) bends type 'B' of any radius, 75 mm dia complete all as specified and directed.
S & F in repairs PVC (SWR) bends type 'B' of any radius, 110 mm dia complete all as specified and directed.
S & F in repairs 75 mm bore PVC (SWR) branch piece (single Y), type 'B' equal or unequal with access door complete all as specified and as directed.
S & F in repairs 110 mm bore PVC (SWR) branch piece (single Y), type 'B' equal or unequal with access door complete all as specified and as directed.
S & F in repairs 110mm bore PVC (SWR) WC connector type 'B' any type complete all as specified and as directed.
S & F in repairs PVC (SWR) gully trap 125/110mm setting and jointing in solvent cement complete all as specified and as directed.
S & F in repairs 100 mm bore Cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) PVC (SWR) complete all as specified and as directed.)
M & L for Sunken flooring treatment as per following details complete all as specified and directed:- (a) Special treatment to toilet floor by demolition of existing treatment of any description and thickness, removal of rubbish to a distance exc. 5KM but not exc.7.5KM. (b) Clean the sunken portion of toilet / Bath / WC / Kitchen throughly to remove laitance, dirt dust, etc. (c) Form angle fillet of size 40mm x 40mm along the junction of wall and floor using polymer modified mortar ("Dr Fixit"Pidicrete URP" or equivalent as given in Appx 'C'.). (d) Sanitary pipes entering through walls and floor shall be sealed with "Dr Fixit Bathseal Tape"or equivalent as given in Appx 'C' and the gaps to be grouted with non-shrink cementitous grout "Dr Fixit Bathseal Grout" or equivalent as given in Appx 'C'. Nahani Traps, etc to be fitted securely and the gaps around it to be grouted in the same manner. (e) Apply one coat of a Bitumen-modified polymer coating "Dr Fixit Bathseal Plus" or equivalent as given in Appx 'C' on all angle fillets by brush
S & F in repairs rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe-410 W(Gde E-250) quality B
S&F in repairs steel work in tubular trushes including special shaped washer etc complete using ERW or induction but welded tubes confirming to I.S. 1161-1979 grade St. 240 etc as in purlins complete all as specified and directed.
M & L for preperation of new steel surfaces of any desciption over 10 cm in width or girth not other wise descibed and applying two coats of synthetic enamell paint over a coat of red oxide
Dismantling of precast interlocking Chequered tiles laid dry of any description thickness & size complete all as specified and as directed.
M & L for 75 mm thick, PCC (1:2:4) type B-1 using 40 mm graded stone aggregates as in sub base complete all as specified.
M & L for coloured glossy finish chequered cement concrete tiles of size 30 cm x 30 cm x25 mm thick with grey cement and pigments , set jointed and pointed in neat cement slurry in floors incl screed bed or bedding layer of mortar 15mm thick average thickness for laying floor finishes in cement mortar 1:6 complete all as specified and directed.
DARSHAN ENTERPRISES
MAHESH DADAJI BACHHAV
MANIYA CONSTRUCTION CO
Shri Sant Cosntruction
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .