Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.8 LAccepted-AOC HOUSE NO 8 589 BEHIND PHC HOSPITAL OLD BUS STAND KORBA KORBA CHHATTISGARH 495678 | 495678 | L1 | Accepted-AOC Awarded being 1st Lowest Bidder | |
| 2 | L2₹18.4 L+₹4,005.62 (0.22%)Rejected-Finance | L2 | Rejected-Finance Awarded being 2nd Lowest Bidder | |
| 3 | L3₹19.7 L+₹1.3 L (6.90%)Rejected-Finance | L3 | Rejected-Finance Awarded being 3rd Lowest Bidder | |
| 4 | L4₹23.3 L+₹5.0 L (26.9%)Rejected-Finance | L4 | Rejected-Finance Awarded being 4th Lowest Bidder |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
20 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Niranjan Lal EE GE(S) Bathinda
GE(S) Bathinda Bathinda Mil Stn
GE(S) BTD TOKEN NO 03 OF 2022-23 COMPREHENSIVE MAINTENANCE INCLUDING ATTENDING DAY TO DAY COMPLAINTS REPAIR REPLACEMENT OF BR WORKS TANK CLEANING AND CERTAIN OTHER MISC WORK TO VARIOUS BLDGS OF OLD NILGIRI NEW NILGIRI AND ABDUL HAMID ENCLAVE UNDER A
2022_MES_519587_3
GE(S)/BTD/TOKEN NO 03/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE(S) Bathinda
Class E
Category a(i)
11 documents required · 11 mandatory
₹500
GE(S)Bathinda
₹40,000
Yes
3 Jan 2023
29 Sept 2022
22 Oct 2022
29 Sept 2022
20 Oct 2022
6 Oct 2022
Amount
Comprehensive maintenance to Carpentary work by attending day to day complaints of Joinery related such as replacement of Builder's hardware of doors, Windows & cupboard and other Carpentary nature works like easening of door, windows and cupboards. Tightening of screws for tower bolt/Aldrop bolt/stoppers,Handle/ Hings in respect to Easening of door/Windows/cupboards (Steel/Wooden/Aluminum) of any description and size, by cleaning, adjusting in position and making the same functional incl small repairs if reqd, with and incl greasing , oiling, welding screws/nails for fixing the fittings.
Comprehensive maintenance to Masonary work by attending day to day complaints of masonary related works such as plastering of wall/ceiling/chajja/making of jambs/cills etc of size not exceeding 0.25 sqm including finishing with distemper/white wash/cement based paint/exterior emulsion paint including two coats of putty as required at site to match with existing surface.
Comprehensive maintenance to plumbing work by attending day to day complaints of plumbing nature like leaking bib taps, Stop cock, pillar cock etc by dismantling / taking down 15 mm dia bib cock/ stop cock/angle cock of any pattern or of any type including minor repairs to health faucet, Jet Spray, EWC Seat cover, fixing of WC bolts including filling white cement, repair to GI pipe leakages, removing air blockages if any, and re-fixing old serviceable bib cocks/ stop cocks any pattern after minor repairs such as replacement of washers etc complete all as specified and directed.. Minor items like thread, Teflon tape, rubber washer shall be deemed to be included in the quoted rates. (any major parts such as jumpers brass/ spindles/ caps etc to be measured as supply only and paid for accordingly)
Note for Item No 01 to 03: The scope of work is of day to day maintenance nature / requirement of works. Contractor shall attend the office of AGE B/R I on daily basis and receive / collect the complaints /requirements of works and shall rectify the repair/maintenance works within time given below: (a) Minor plumbing complaints - 48 Hrs (c) Minor Joinery - 48 hours (d) Major Plumbing- 5 days (e) Major Joinery - 15 Days. If contractor fails to rectify the complaints with materials / items to be replaced if required a penalty @ 50% quoted rate by the contractors of that particular item shall be recovered from his payment. The responsibility of getting the complaints attended & rectified shall lies with the contractor even if he fails to complete the complaints within 48 hours. In the delayed case of a rectification of complaints even after 48 hours, he shall rectify the same within one week. Attending the complaints of AGE B/R I like fixing screws to tower bolt/Aldrop bolt/ stoppers,Handle/ Hings in respect of Easening of (Steel/wooden/Aluminum) door/Windows of any description and size , by cleaning ,adjusting in position and making the same functional incl small repairs if reqd. with and incl greasing , oiling, screws/nails for fixing the fittings. Note : (i) The complaint received from complaint cell shall have to be attended on same day and the time of complition will be as mentioned above. (ii) Cost of grease, oil, nails etc is deemed to be included in the quoted rate. Nothing extra shall be paid on this account.
Supply only Jumper brass with rubber or leather washer complete for 15 mm dia bib cock / stop cock brass complete all as specified and directed.
Supply only spindle brass for 15 mm dia CP Bib cock/ pillar cock/ concealed cock of any pattern complete all as specified and directed..
Supply only capstan head / cap of CP bib tap / CP stop cock 15 mm size complete all as specified and directed..
Repair to concealed PVC (PE-AL-PE) pipes on walls including replacement of fittings (such as elbows, tees, reducers, couplers, short pieces, connectors, etc.), making joints leak proof and making good in CM 1:3 or PCC 1:2:4 (replair/replacement of tiles shall be measaured & paid separately), complete all as specified and directed.
S & F in repairs plastic-metal composite fittings (such as elbows, Tees, reducers, couplers, connectors/unions, etc) suitable for PE-AL-PE composite pressure pipes of 1620 (outside dia 20mm) etc complete all as specified and directed.
S & F in repairs plastic-metal composite fittings (such as elbows, Tees, reducers, couplers, connectors/unions, etc) suitable for PE-AL-PE composite pressure pipes of 2025 (outside dia 25mm) complete all as specified and directed.
Dismantling carefully cement concrete in floor, etc around floor traps or any other concealed fittings, ( replacing floor traps/fittings if required and shall be paid at supplied only rate separately), sealing joints with solvent cement or other suitable materials and making joint leak proof and making good surfaces with PCC 1:2:4 or CM 1:3 (repair/replacement of tiles in floor shall be measured and paid separately), complete all as specified and directed.
Supply only cast iron floor trap 75 mm dia with stainless steel grating with or without holes including jointing to waste pipe complete all as specified and directed.
M&L for filling of white cemnt around grating, WHB, WC, sink and holes made by termite etc complete all as specified and directed. .
S & F in repairs 15mm bore fancy type chromium plated brass bib taps long body, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repairs bib cock PTMT standard 15 mm dia of any colour high pressure screwed for iron pipe & fixed ( male or female as required) complete all as specified and directed.
S & F in repairs 15mm bore, fancy type, chromium plated, angle cock, cast coppler alloy, screwed both ends for iron pipe complete all as specified and directed.
S & F in repairs 15mm bore fancy type chromium plated stop valve cast copper alloy, with long shank & cup (concealed type) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete including necessary repair to existing tiles, cement plaster complete all as specified and directed.
S & F in repairs 15mm bore, brass CP central hole basin mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.
S & F in repairs 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.
S & F in repairs single lever exposed shower mixer 15mm bore with provision for connection to exposed shower pipe & hand shower with connecting legs and wall flange, complete all as specified and directed.
S & F in repairs brass chromium plated shower rose 100mm dia with swivel joints with and including suitable shower arm any size, complete all as specified and directed.
S&F in repairs PVC waste pipe with socket suitable for connection to Waste fittings of 32/40mm dia and of length minimum 75 cm complete all as specified and directed.
S & F in repairs 32/40mm waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified and directed.
S & F in repairs 32/40 mm waste fittings for stainless steel sink (sink coupling), brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified and directed.
S & F in repairs PVC connection 15 mm size with brass nuts of length 450 mm of approved quality complete all as specified and directed.
S & F in repairs PVC connection 15 mm size with brass nuts of length 600 mm of approved quality complete all as specified and directed.
S & F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, ant-syphonage pipe, etc. complete all as specified and directed.
Fixing only in repairs vitreous china wash down water closet pan (pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, ant-syphonage pipe, etc. complete all as specified and directed.
S & F in repairs plastic water closet seat cover, white/ivory colour, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S & F in repairs seat cover for vitreous china wash down water closet with integral flushing cistern complete all as specified and directed.
S & F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including connection to trap and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor and fixed complete all as specified and directed..
M&L PCC 1:5:10 type D-2 using 40mm graded crushed/stone agg for foundations, filling & mass concrete, sub-base & sub-floors, etc. complete all as specified and directed.
S & F in repairs vitreous china wash basin, white, flat back, size 550 x 400mm excluding taps, wastes but including brackets complete all as specified and directed.
Fixing only in repairs vitreous china wash basin, of any description & size, excluding taps, wastes but including brackets complete all as specified and directed.
S & F in repairs brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed.
S & F in repairs CP grating (with or without waste hole), 125 mm size, fixed on floor/nahani traps etc complete all as specified and directed.
Fixing only in repairs CP grating (with or without waste hole), 125 mm size, fixed on floor/nahani traps with white cement etc complete all as specified and directed.
S & F in repairs PVC valveless, syphonic action type flushing cistern 10 ltr capacity, low level, with inlet ball valve, float and handle including brackets, PVC bend long type and connectin to flush pipe of any size and pattern complete all as specified and directed.
S&F in repairs flush pipe of polyethene of low or high density or PVC, 32mm dia, for low level cistern and fixed complete all as specified and directed..
S & F in repairs to flushing cistern by replacing internal flush kit /washer etc for vitreous china wash down water closet with integral flushing cistern complete all as specified and directed.
S&F in repairs PVC Knob/Handle (as per sample kept in AGE office) for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed..
S&F in repairs PVC Syphon (as per sample kept in AGE office) for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed..
S&F in repairs complete Veta washer set (as per sample kept in AGE office) for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed.
Fixing only in repairs low level flushing cistern any capacity after carrying out minor repairs such as stopping of leakage etc. complete all as specified and directed..
S & F in repairs Toilet paper holder recessed type stainless steel complete all as specified and directed.
S & F in repairs stainless steel soap dish of standard size for single soap complete all as specified
S & F in repairs Jet spray, CP, brass body with wall hook and 1 mtr SS pipe complete all as specified and directed.
S & F in repairs health faucet brass body with wall hook and 1 mtr SS pipe complete all as specified and directed.
S & F in repairs brass chromium plated tubular towel rail, 20mm dia, D type 60cm long between flanges complete all as specified and directed.
S & F in repairs chromium plated towel ring complete all as specified and directed.
Supply and fixing in repairs towel rack 600 mm long of CP Brass complete all as specified and directed.
S & F 5.5mm thick sheet glass corner glass shelf (Approx size 25cm/30cm ) with CP brass bracket & railing etc; complete all as specified and directed.
S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets guard & railing 60 cm long, complete all as specified and directed.
S &F in repairs PTMT mirror cabinet of size 380x450mm best quality confirming to sample kept in GE's office, complete all as specified and directed.
S & F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm complete all as specified and directed.
S & F in repairs stainless steel plate racks of size 900mmx600mmx250mm having thickness of SS strip 1mm, fixed on wall etc complete all as specified and directed.
S & F in repairs 40mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/Sqmcm fixed complete to walls (including fixing clamps), ceiling or laid in floors etc as in spouts in sunken & waste pipes etc incl all fittings such as elbows, tee or connecters etc complete all as specified and directed.
S&F in repairs three layers rotational moulded polyethylene water storage tanks white (cylindrical vertical top) hoisted and fixed in position 500 litre capacity complete all as specified and directed..
S&F in repairs three layers rotational moulded polyethylene water storage tanks white (cylindrical vertical with closed top) hoisted and fixed in position 1000 litres capacity complete all as specified and directed..
S&F in repairs covers for PVC overhead water tanks of any capacity (as per sample kept in AGE office) complete all as specified and directed..
S&F in repairs 25mm dia tank nipple of suitable size as per site requirement complete all as specified and directed.
S & F in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20mm bore ( weight 210 gms Minimum) complete all as specified and directed.
S & F in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 15mm bore ( weight 210 gms Minimum) complete all as specified and directed.
S & F in repairs 20mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S & F in repairs 32mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
Dismantling and disconnecting of existing cast iron soil vent pipe 75 mm bore fixed to wall,laid in trenches including all fittings & accessories complete all as specified and directed.
S & F cast iron sand soil waste and vent pipe 75mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls complete all as specified and directed.
Fixing only cast iron sand soil waste and vent pipe 75mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls complete all as specified and directed.
S&F in repairs oval access doors to cast iron pipes of 75mm bore with rubber washer packing & bolts & nuts as required complete all as specified and directed.
S & F in repairs CI bends any radius, 75mm bore, diminishing pieces or tapers, etc with or without oval access doors, complete all as specified and directed.
Dismantling and disconnecting of existing cast iron soil vent pipe 100 mm bore fixed to wall,laid in trenches including all fittings & accessories complete all as specified and directed.
S & F cast iron sand soil waste and vent pipe 100mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls complete all as specified and directed.
Fixing only cast iron sand soil waste and vent pipe 100mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls complete all as specified and directed.
S&F in repairs oval access doors to cast iron pipes of 100mm bore with rubber washer & bolts & nuts as required complete all as specified and directed.
S & F in repairs CI bends any radius, 100mm bore, diminishing pieces or tapers, etc with or without oval access doors, complete all as specified and directed.
S & F in repairs 100mm bore CI branch pieces, double (spigot or socketed type) with oval access doors complete all as specified and directed.
Fixing only CI fittings 75/100mm size of any type & description complete all as specified and directed.
Sealing only joints of cast iron pipes and fittings with chemical cement and making the joints leak proof complete all as specified and directed.
Taking down or up 15 mm bore galvanised iron tubing/PL-AL-PE pipes and connection including cleaning for refixing or removal complete all as specified and directed.
S & F GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed.
S & F GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm in short lengths, complete all as specified and directed.
S & F to walls/ chases/ ceiling or laying in floors polythene –aluminium- polythene (PE-AL-PE) composite pressure pipe 1620 (Out side dia-20mm) including all crimp type internal sealing , plastic-metal composite fittings (such as elbows, reducers, tees, couplers, short pieces connectors etc. complete all as specified and directed..
Refixing old GI tubing 15 mm bore pipe and connections in new or old position as on walls/ ceiling/ floors etc complete all as specified and directed.
Taking down or up 20 mm bore galvanised iron tubing /PE-AL-PE pipes and connection including cleaning for refixing or removal complete all as specified and directed.
S & F GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed.
S & F to walls/ chases/ ceiling or laying in floors polythene –aluminium- polythene (PE-AL-PE) composite pressure pipe 2025 (Out side dia-25mm) including all crimp type internal sealing , plastic-metal composite fittings (such as elbows, reducers, tees, couplers, short pieces connectors etc. complete all as specified and directed..
Refixing only old GI tubing 20 mm bore pipe and connections in new or old position as on walls/ ceiling/ floors etc complete all as specified and directed.
Taking down or up 25 mm bore galvanised iron tubing and connection including cleaning for refixing or removal complete all as specified and directed.
S & F GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 25 mm complete all as specified and directed.
Refixing only old GI tubing 25 mm bore pipe and connections in new or old position as on walls/ ceiling/ floors etc complete all as specified and directed.
Cutting chases in brick walls girth exceeding 10 cm but not exceeding 20 cm wide for concealed water tubing etc and making good in CM 1:3 or PCC 1:2:4 as required complete all as specified and directed..
S & F in repairs 110 mm bore of 6 kg/CM Square pressure fixed to walls with MS clamps of 25 x 3 mm flat iron and fixed with 75 mm long screw with PVC gutties not exceeding 1.80 mtr centre to centre distance complete all as specified and directed.
Fixing only in repairs PVC rain water pipes of any description, jointing pipe with elbow/pipe joint with chemical cement/suitable adhesive & providing MS clamps of 25 x 3 mm flat iron and fixed with 75 mm long screw with PVC gutties not exceeding 1.80 mtr centre to centre distance complete all as specified and directed.
S & F 110 mm bore, PVC (SWR) fittings such as bends, tee, shoe etc; fixed to PVC pipes complete all as specified and directed.
M&L for stopping of leakage/Seepage in CI/PVC/GI pipes by using M-Seal complete all as specified and directed.
Taking down chowkats or frame with shutter (without taking off shutters from the frames) not exceeding 1.50 sqm each and removal from site complete all as specified and directed.
Taking down chowkats or frame with shutter (without taking off shutters from the frames) exceeding 1.50 sqm but not exceeding 4.00 Sqm each and removal from site complete all as specified and directed.
Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and removed from site complete all as specified and directed.
Taking down shutters of any description not exceeding 1.00 sqm and refixing in the same opening including easing and adjusting including renewal of unserviceable screws etc. complete all as specified and directed.
Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and refixing in the same opening including easing and adjusting including renewal of unserviceable screws etc. complete all as specified and directed.
Re-securing or easing & adjusting, without taking down shutter of any description exceeding 1 sqm but not exceeding 2.0 sqm each complete all as specified and directed..
Re-securing or easing & adjusting, without taking down shutter of any description not exceeding 1.00 sqm each complete all as specified and directed..
S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 125 x 60mm, (thickness of steel sheet shall be 1.25mm) complete all as specified and directed.
S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 105 x 60mm, (thickness of steel sheet shall be 1.25mm) complete all as specified and directed.
S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 75 x 60mm, (thickness of steel sheet shall be 1.25mm), complete all as specified and directed.
M&L Mild Steel framed work of Gde Fe-410-0 or Fe-310-0 as in doors chowkats (single or double) of angles or other section with gusset plates, rails, braces, bands straps, hold fast etc, complete and including necessary welding for fixing flat iron for fixing hooks and hinges. complete all as specified and directed.
M & L for PCC 1:3:6 type C1 (20mm graded stone aggregates) as in filling back of pressed steel door frames/chowkhats and for fixing hold fasts, etc., complete all as specified and directed.
S & F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per specifications & drawing complete all as specified and directed.
S & F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings complete all as specified and directed.
S & F 2nd class hardwood, factory made shutters, 35 mm thick plain framed panelled shutters (any number of panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both side. The size of rail & stiles as per IS :1003 (Part I), kiln seasoned and chemically preassure treated, complete all as specified and directed.
S&F 2nd class hardwood, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, gauze, etc.; sizes of members of shutters as specified in SSR Part I Section 8, Clause 8.24 (a) complete all as specified and directed.
M & L 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F for steel windows/ventilators with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded, complete all as specified and directed.
S&F for windows/ventilators with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars, complete all as specified and directed.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.
S & F mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkhats, complete all as specified and directed.
S & F aluminium anodized handles cast type 125mm long complete all as specified and directed.
S & F 200 mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F 250 Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
S&F in repairs 300 aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
S & F floor door stopper 140mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring complete all as specified and directed.
S & F in repairs floor door stopper 140mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring complete all as specified and directed.
M&L rubber gasket 50mm wide fixed with screws or nails etc at bottom of door shutter of any description, complete all as specified and directed.
M&L in repairs rubber gasket 50mm wide fixed with screws or nails etc at bottom of door shutter of any description, complete all as specified and directed.
S&F peg set/coat hooks (set of 4/5), stainless steel, complete all as specified and directed.
S&F in repairs peg set/coat hooks (set of 4/5), stainless steel, complete all as specified and directed.
S&F in repairs double/tripple coat hooks, stainless steel etc; complete all as specified and directed.
S & F PTMT ( Poly Tetra Methylene Terephthalate ) butt hinges 100mm long of best quality complete all as specified and directed.
S & F PTMT ( Poly Tetra Methylene Terephthalate ) barrel tower of bolt best quality, 150 mm long complete all as specified and directed.
S & F PTMT ( Poly Tetra Methylene Terephthalate ) door handles of best quality, 150 mm long complete all as specified and directed.
S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.
M&L 2nd class hardwood, beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc. including painting/polishing and matching complete all as specified and directed.
M&L in repairs 2nd class hardwood plain fillets, square, rectangular or triangular in section, wrought, secured with nails/brads or secured with screws, cross sectional area exceeding 6 sqcm and not exceeding 13 sqcm, complete all as specified and directed.
S & F in repairs mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkhats, complete all as specified and directed.
S & F in repairs mild steel Butt Hinges, 75 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkhats, complete all as specified and directed.
S & F in repairs 125 mm long aluminium handles, fabricated type, anodised and fixed complete all as specified and directed..
S & F in repairs 200 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
S & F in repairs 125 mm to 150 mm locking device aluminium anodised for pvc door/wooden doors in baths complete all as specified and directed.
S & F in repairs (fixing with screws or welding as required) 300mm mild steel ordinary rat tail rod springs ( Helical Springs), including roller & roller plate complete all as specified and directed.
S & F in repairs for PTMT ( Poly Tetra Methylene Terephthalate ) butt hinges 100mm long best quality complete all as specified and directed.
S & F in repairs PTMT ( Poly Tetra Methylene Terephthalate ) barrel tower bolt best quality, 150 mm long complete all as specified and directed.
S & F in repairs PTMT ( Poly Tetra Methylene Terephthalate ) door handles, best quality, 125 mm long complete all as specified and directed.
S&F in repairs ( to be fixed with screws & welding as required) continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flap (when open) 30mm complete all as specified and directed.
M&L for welding in repairs with thickness of metal not exceeding 6mm and not exceeding 2.5 cm in length etc complete all as specified and directed.
S& F in repairs steel chains for door shutters etc complete all as specified and directed.
S&F in repairs magic eye for flush/panelled door shutter etc complete all as specified and directed.
Supply and fixing Brush type gasket/seal of best quality fixed to bottom rail of aluminium door complete all as specified and directed.
S & F in repairs to steel door, Window and Ventilators by spot or running welding including repair of MS butt hinges/door spring or like of any size to steel chowkhats by bringing welding plant at site complete all as specified and directed..
S & F in repairs to aluminum door shutter, window, sliding windows, ventilator partition by replacing joining cleats glazing clips rubber packing andoised aluminum snap beading, screws etc complete complete all as specified and directed. Note : Sheet glas, particle board will be measured and paid separately if provided at site.
S&F aluminium glazed windows/ventilators with frame of size 123 x 38.10 x 2mm comprising of shutter openable, rails and stiles of Z-sec (33.3 x44x1.3mm) Section No S-382 of Jindal or equivalent of standard extruded aluminium anodisied natural shade/powder coated satin finish sections, closing arrangements, handle for openable shutter and all joindery items required complete with 4.8 mm thick plain/tinted/itched glass, packing with rubber gasket, aluminium beading etc around both sides for fixing of glass as required complete all as specified and directed.
S&F aluminium glazed door with frame of size 100 x33x2mm comprising of shutter rails & stiles (top 75 x 44 x2mm, lock rail 105 x 44 x2mm & bottom rail of 200 x 44 x2mm) of standard extruded aluminium anodisied natural shade/powder coated satin finish sections, closing arrangements, handle for openable shutter and all joindery items required complete with 4.8 mm thick plain/tinted/itched glass, packing with rubber gasket, aluminium beading etc around both sides for fixing of glass as required complete all as specified and directed.
S&F powder coated aluminium glazed and wire gauged door with frame of size 100 x33x2mm comprising of shutter rails & stiles (top 75 x 44 x2mm, lock rail 105 x 44 x2mm & bottom rail of 200 x 44 x2mm) of standard extruded aluminium anodisied natural shade/powder coated satin finish sections, closing arrangements, handle for openable shutter and all joindery items required complete with 4.8 mm thick plain/tinted/itched glass/stainless steel wire cloth, packing with rubber gasket, aluminium beading etc around both sides for fixing of glass as required complete all as specified and directed.
S&F three track aluminum powder coated sliding windows using two tracks for glazed window shutter and one track for wire gauged shutter including provision of necessary rubber gasket fixing glass panes/ wire mesh etc. complete all as specified and directed. shown in drawing No. CE BT/SK-936R sheet 1/1. NOTE:- Glass panes & wire mesh shall be measured and paid for separately under respective item .
S&F aluminum powder coated vents including provision of necessary rubber gasket for fixing glass panes etc. complete all as specified and directed. shown in drawing No. CE BT/SK-936R sheet 1/1 NOTE:- Glass panes shall be measured and paid for separately under respective item.
M&L prelaminated partical board 12 mm thick,interrior grade,prelaminated one side with decorative choice lamination and other side white lamination fixed with screw to timber/ aluminium frame with snap grid complete all as specified and directed.
M&L 5.8mm thick sheet glass, plain with necessary sliding arrangements for build cup board etc complete all as specified and directed.
S&F in repairs cast iron body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified and directed.
Supply and fixed in repairs Handle 200 mm long fancy type of stainless steel complete all as specified and directed.
S & F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.. Note : Cutting/opening and making good for the portion required to fix in floor shall be included in the quoted rate of this item. Nothing extra shall be paid on this account.
Taking down and refixing steel rolling shutters having area of opening not exceeding 8 Sqm each, of any description and refixing the same at original location after greasing, oiling, denting, welding and making it fully functional to the entire satisfaction of Engineer-in-charge by replacing existing defective ball bearings springs etc. complete all as specified and directed.
S&F in repairs 18/19mm thick pre-laminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in kitchen cupboards, drawers, shutters, shelves etc including teak wood lipping, 6mm thick on edges fixed with nails etc, complete all as specified and directed.
S&F in repairs 18/19mm thick, block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame work as in kitchen cupboards, drawers, shutters, shelves etc including teak wood lipping, 6mm thick on edges fixed with nails etc,complete all as specified and directed.
S & F in repairs Solid PVC wall lining consisting of 5 mm thick plain colour PVC sheet and fixing in position on back side of cup boards and like complete all as specified and directed.
S&F in repairs Plywood 18 mm thick grade BWR, type BB fixed with screws/nails to timber frame work and as in cupboard & cupboard shutter complete all as specified and directed.
S&F in repairs Plywood 6 mm thik grade BWR, type BB fixed with screws on walls complete all as specified and directed.
M&L in repairs Decorative laminate type 1 of surface finish 0.9 mm thick, any colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.
S&F in repairs telescopic hinges of suitable size for drawers etc, taking out drawers & refixing the same after replacement of hinges etc complete all as specified and directed.
S & F hasp & staple 100mm size, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
Fixing only in repairs hasp & staple 100mm size, safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
Supply and fixing in repair 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished and fixed complete all as specified and directed..
S & F for catcher such as in cupboards etc to catch & support shutters of best quality complete all as specified and directed.
S&F in repairs channels of aluminium including roller of best quality for built in cup board by taking down exisiting glass and refixing the same glass after replacement of aluminimum channels and roller complete all as specified and directed.
S&F in repairs 5.5 mm sheet glass in built in cup boards complete all as specified and directed.
M&L 5.8mm thick sheet glass, plain with necessary sliding arrangements for build cup board etc complete all as specified and directed..
M&L for 25mm dia fancy type PVC coated on MS pipe coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed.
M&L for 25mm dia stainless steel pipe curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed.
S&F in repairs end knobs for PVC coated MS pipe curtain rods, complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/springs clips complete all as specified and directed.
S & F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.
S & F 3.0mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.
S & F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares exceeding 0.50 Sqm in each pane complete all as specified and directed.
M&L for securing window/vent glass of any description in existing metal/wood frame fixed with putty/ beads including removing loose or decayed putty/beads, and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured) complete all as specified and directed.
Taking out old broken glass of any thickness, size, quality or description from aluminium window and S & F 4.8mm thick sheet glass of any shade including rubber packing and taking out aluminium window/vent shutter if required complete all as sepcified and directed..
Taking out old broken glass of any thickness, size, quality or description from aluminium window and S & F 4.8mm thick frosted glass of any shade including rubber packing and taking out aluminium window/vent shutter if required complete all as sepcified and directed..
Demolition of re-inforced cement concrete of any description & in any position not otherwise specifically provided for, complete all as specified and directed.
Drilling holes of suitable size for passing tubes of any description into or through RCC cooking platform slab with stone or brick wall etc. and the like of thickness not more than 250 mm by electric drilling machine and making good complete all as specified and directed..
M&L for RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) for slabs supported on walls, shelves, beams and columns, lintels, facia and the like, complete all as specified and directed..
M&L for mild steel TMT bars 8 mm dia and over, cut to length bent to shape required including cranking, bending spirally etc and binding with mild steel wire not less than 0.9 mm dia as in reinforcement etc complete all as specified and directed..
Formwork for rough finished surfaces to soffit of suspended slab such as roof slab, floor slab/chajjas/beams/colns/fins/facia and spiral stair case not exceeding 200mm thick complete all as specified and directed.
Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.
M&L brick work with sub class `B' bricks straight or curved on plan exceeding 6.0m mean radius built in cement mortar 1:6 complete all as specified and directed..
M&L brick work with sub class 'B' bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 but except bricks (old serviceable bricks to be used) complete all as specified and directed. Note : The rate includes for cleaning of old bricks.
M&L brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick walls built in CM (1:4), etc; complete all as specified and directed.
Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed..
M&L rendering 15mm thick in CM (1:4) and finishing even & fair including preparation of these surfaces for further treatment,complete all as specified and directed. (Building height upto two story)
M&L rendering 15mm thick in CM (1:6) and finishing even & fair including preparation of these surfaces for further treatment, complete all as specified and directed. (Building height upto two story)
M&L rendering 5 mm thick in CM (1:3) and finishing even & fair as in ceiling including preparation of these surfaces for further treatment, ccomplete all as specified and directed. (Building height upto two story)
M&L Birla putty on old plastered surfaces of walls and in ceiling as preparatory to distempering or any other treatment to the entire satisfaction of Engineer-in-charge complete all as specified and directed.
M&L applying two coats of oil bound distemper on newly plastered surfaces on walls etc. over a coat of primer complete all as specified and directed.
M&L preparaton of old decorated, plastered/unplastered or concrete surfaces on walls including cornices & pillars etc.; by brooming down, steel wire brushing; scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, etc. applying two coats of oil bound distemper over a coat of putty/primer area not exceeding 5 Sqm in patches complete all as specified and directed.
M&L applying three coats of white wash on newly plastered surfaces on wall complete all as specified and directred.
M&L applying three coats of white wash on newly plastered surfaces on ceiling complete all as specified and directred.
M&L for applying two coats of weather proof exterior emulsion paint over a coat of exterior primer over newly plastered wall and ceiling surfaces including cornices & pillasters etc as per manufacturer's specification & instruction; complete all as specified and directed.
M&L applying two coats of plastic emulsion paint of any tint & shade over a coat of primer on prepared wall & ceiling surfaces complete all as specified and directed.
M&L for applying two coats of cement base paint over a coat of primer on newly plastered wall and ceiling surfaces including cornices & pillasters etc as per manufacturer's specification & instruction; complete all as specified and directed.
M&L for preparation of new or previously untreated wood and wood based surfaces of any description exceeding 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Supply only water proofing compound complete all as specified and directed. Make:- Dr. fixit (as per manufacture's specification) or any other make from list of make attached in tender documents.
Demolition of cement concrete (unreinforced) including tiles of any description & terrazo finish, etc. not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.
M & L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including M & L for 15mm thick screed in CM 1:6, including dismantling of old tiles of any description etc complete all as specified and directed.
M&L non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match over and including M & L for 15mm thick screed in CM 1:6 and including dismantling of old tiles/terrazzo finish etc, complete all as specified and directed.
M & L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including M & L for15mm thick screed bedding layer in CM 1:6 and including roughening surfaces of old concrete/terrazzo finish floor by picking, sweeping clean and washing down with water to remove dust etc/ dismantling old tiles of any description, complete all as specified and directed.
M & L glazed ceramic coloured tiles of approved quality in vertical surfaces 450mmx300 mm x7mm/450mm x 350 x 7mm thick set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including M & L for 10mm thick plaster in CM 1:4 and including dismantling of old tiles/terrazzo finish etc; complete all as specified and directed.
Renewing non skid /glazed ceramic tiles in patches in floor or walls, area not exceeding 5 sqm including cutting out broken tiles carefully, preparing beds and laying or setting, jointing & pointing new tiles complete all as specified and directed. Note:- New tiles shall be paid at supply only rate separately under appropriate item.
Supply only non skid ceramic coloured tiles 300 x300 x7mm thick complete all as specified and directed.
Supply only glazed ceramic coloured tiles 450 x300 x7mm thick complete all as specified and directed.
Supply only glazed ceramic coloured tiles 300 x200 x7mm thick complete all as specified and directed.
M&L for filling of white cement in tile joints mixed with pigment to match the tile etc complete all as specified and directed.
M&L in repairs marble work (Udaipur green slabs) not less than 16 mm thick (table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rounding the edges complete all as specified and directed..
M & L for first quality, scratch free, straight cut/joint free, vitrified pavers for external use, 9-10mm thick, of size 300mm x 300mm, in floors etc over & including M & L for 15mm thick cement mortar (1:4) screed, set and jointed with grey cement slurry & pointed with grout of matching shade of tiles, complete all as specified and directed..
M&L 25mm thick cement concrete type B-1, 1:2:4 (20 mm graded stone aggregate) as floors, sub-floors etc and finishing surfaces of concrete topping as even & fair or even & rough to receive the topping layer complete all as specified and directed.
M & L 50mm thick, cement concrete 1:3:6, type C2 (40mm graded aggregate) as in floors, plinth protection, paths, etc and finishing top surfaces even and smooth (without using extra cement) complete all as specified and directed.
M&L for cement concrete type B1, 1:2:4 (20mm graded crushed stone aggregate) as in bedding, benching of manholes, copings, roof kerbs & surface channel etc. complete all as specified and directed.
S&F in repairs 6mm thick fibre cement board as in water pipe line shaft complete all as specified and directed.
M & L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 Sqm, on vertical surface as in skirting etc. set and jointed in neat cement slurry/paste and pointed in white or coloured cement to match over & including M & L for 10mm thick screed in CM 1:4, including dismantling of old tile/trerrazzo finish etc complete all as specified and directed.
Note:- All debris obtained from disminatling, demolition and taking down (Exept credited to contractor) shall be desposed off out side MOD land and charges, if any, as incurred in civil area as per their regulation shall be deemed to be included in quoted rates. No extra claim on this account shall be admissble.
Note:- Net contract sum shall be calculated after deduction of Sch of credit.
K L JINDAL AND CO.
M/s Manav Builders
KARTIK BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .