Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.8 LAccepted-AOC 7 11 1 BROJONATH LAHIRI BISHNUPUR SOUTH 24 PGS WEST BENGAL 743503 | 24 PARAGANAS SOUTH | WEST BENGAL | 743503 | L1 | Accepted-AOC Being a lowest bidder and reasonable | |
| 2 | L2₹49.1 L+₹3.7 L (8.12%)Rejected-Finance 72 A ABINASH CHANDRA BANERJEE LANE KOLKATA 700010 | KOLKATA | WEST BENGAL | 700010 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹49.2 L+₹3.7 L (8.24%)Rejected-Finance ROOM NO B 111 PART III GANESH MURTINAGAR CAPT PRAKASH PETHE MARG CUFFEPRADE CALABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹50.7 L+₹5.2 L (11.5%)Rejected-Finance 38 BAGUIATI ROAD KOLKATA 700059 | 24 PARAGANAS NORTH | WEST BENGAL | 700059 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹51.1 L+₹5.6 L (12.4%)Rejected-Finance G C ROAD ABDUL LATIF ROAD PO TITAGARH P S RAHARA KOLKATA 700 119 | 24 PARAGANAS NORTH | WEST BENGAL | 700119 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹43.2 L
EMD Value
₹86,400
Closing Date
10 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (FW) Kolkata
D9 Commissariat Road Hastings Kolkata 700022
PROVN OF CERTAIN REVENUE AND MINOR WORKS IN OTM ACCN AT INSIDE FORT WILLLIAM UNDER GE FW KOLKATA
2023_MES_618740_1
8175/E8
Open Tender
Civil Works
Item Rate
150 days
GE(FW) Kolkata
Refer as per tender documents
7 documents required · 7 mandatory
₹500
GE (FW) Kolkata
₹86,400
21 Nov 2023
14 Sept 2023
11 Oct 2023
14 Sept 2023
10 Oct 2023
3 Oct 2023
Amount
SCHEDULE 'A' PART-I (B/R WORKS) Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing tiles from site and rubbish off the premises complete all as specified and directed.
Demolition of brick work or stone boulder masonry built in cement mortar including all quarries, arches pillars etc and removing off the site complete all as specified and directed.
Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as directed.
M & L for plain cement concrete (1:5:10) type E-2 using 40 mm graded aggregates in foundation filling and mass concrete complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
M&L for mild steel TMT Bars 6-8 mm dia cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm or securing with clips, etc., complete all as specified and as directed.
M&L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required as in reinforcement and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (horizontal or sloping) for rough finished surfaces complete all as specified and directed.
Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railing, openings in concrete walls, floors, roofs and similar work; not exceeding 200 mm wide and sides of RCC/PCC bands in walls (horizontal or sloping), exc 10cm wide and but n exc 20cm wide, for fair finished surfaces, complete all as specified and directed.
M&L for RCC (nominal mix) (1:1½:3), type A-1 (using 20mm graded stone aggregate) as inslabs, supported on walls, beams and columns, in floors, roof landings, balconies, canopies, deck slabs and shelves etc., complete all as specified and as directed.
M&L for plain cement concrete (1:2:4) type B1 using 20 mm graded aggregates in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones , bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including formwork complete all as specified and directed.
M&L for Cutting openings, through brick walls built in cement mortat for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m, complete all as specified and directed.
M&L for cutting holes in brick wall exceeding half brick but not exc one brick thick walls for inserting hold fasts for mild steel grills and making good dismantled portion in cement concrete 1:2:4 type B1 (using 20 mm graded aggregates) including necessary formwork and making good surfaces as per existing finisjhes complete all as specified and directed.
M&L for cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth complete all as specified and directed.
M&L for Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work in cement mortar in CM 1:4, complete all as specified and directed.
M&L for Making good under cills or over arches, lintels and bres?summers. including all?pinning when necessary in cement mortar 1:4, complete all as specified and directed
M&L for brickwork with fly-ash old size bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.
M& L for brickwork with fly ash old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.
M & L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with water proofing compound (@ 200 ml per bag of cement or as per manufacturer's instructions) on brick/stone walls or concrete surfaces finished even and fair (upto any height) for external surfaces complete all as specified and directed. Note : Water Proofing compound shall be measured and paid separately as "Supply only".
Supply only liquid Water Proofing Compound, conforming to IS and as approved, complete all as specified.
M&L for rendering 15 mm thick to fair faces of brick work / concrete surface in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.
M&L 10 mm thick rendering on fair faces of concrete surfaces in cement mortar (1:3) as on ceiling finishing concrete surfaces even and smooth without using extra cement complete all as specified and directed
M&L mild steel work in tubular trusses including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS-1161:2014 grade St-240, complete all as specified and directed. (NOTE: Quoted rates shall be deemed to include for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete)
M&L Mild steel framed work such as grills of ornamental type, gratings, etc with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tanks and similar works incl portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc confirming to grade Fe-290. Gde-E-165 complete all as specified and directed.
M&L welded steel wire fabric, weight n exc 4 kg per square meter complete , fixed to steel members, all as specified and directed.
Providing and fixing of false ceiling with powder coated exposed G.I grid suspension system (E-Grid T-2430 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200 mm c/c) consisting of Main Runner 3600 mm long, Cross Tee 1200mm/600mm long and Wall Angle. The Wall Angle shal be fixed on PVC Dash Fasteners on the perimeter of wall by steel screws with distance 300 mm c/c. the main Runners to be placed @ 1200mm, The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm x 600 mm. Additional Cross Tees of 600mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm x 600mm. Grid of module size 600mm x 600mm shall be supported by 3 mm dia G.I. wire from purlins/ soffit. 4 mm thick High Pressure Steam Cured Everest Non Asbestos Fibre Cement Standard Ceiling Board (Density > 1200 Kg/m3, Modulus of Rupture (M.O.R)-15.85 MPa, Thermal Conductivity (K)-0.0872 W/mK) of size 595mm x 595mm, confirming IS 14862 & Type B Category III of ISO 8336:1993, (Reaction to fire-A2-s1 D0) tested as per EN13501 Part-I & BS-476 Part 4,5,6&7 should be placed in the Grid module to form a False Ceilingcomplete all as specified and directed by Engineer-in-charge"
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area n. exc 1.5 Sqm each wooden all as directed.
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc.4.00 Sqm each wooden all as directed.
Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 Sqm each and removing from the site, complete all as directed.
M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door / window / Ceosetory windows & other Frames / Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder / rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
All as per item No. 31.00 above, but frame of size 45 x 70mm
M&L for Providing and fixing Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.
S&F butt hinges, medium weight, stainless steel, 100mm complete all specified and directed. (Make : PRAYAG, Cat No: HG2414 or equivalent in other makes specified in tender)
S&F 150mm extruded aluminium handles, fabricated type, anodised complete all specified.
S&F 200mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all specified.
S&F 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all specified.
S&F 300mm aluminium, anodised sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, Complete all as specified and directed.
S&F 250mm aluminium, anodised sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, Complete all as specified and directed.
S&F stainless steel handle of 200 mm long, complete all as specified and directed. (Make : PRAYAG, Cat No: DHL2200 or equivalent in other makes specified in tender)
S&F stainless steel tower bolt of 200 mm long, complete all as specified and directed. (Make : PRAYAG, Cat No: TBR2200 or equivalent in other makes specified in tender)
S&F stainless steel Aldrop bolt of 200 mm long, complete all as specified and directed. (Make : PRAYAG, Cat No: LD1208 or equivalent in other makes specified in tender)
S&F 30mm wide continuous (piano) hinges, mild steel, bright finish or electrogalvanised, complete all as specified and directed.
S&F Cup board lock drawer Gde-I of brass, 50mm, 2 lever, complete all as specified and directed.
S&F Door closer hydraulically regulated, designation No. 3, universal type, aluminium (die cast) body, suitable for door shutters of 851 to 1000 mm in width & weight between 61 to 80 kg complete all as specified and directed.
S&F in repair 12mm thick plywood,grade BWR, type BB, tixed to existing wooden surfaces with nails, complete all as specified and directed.
S&F in repair 19mm thick plywood,grade BWR, type BB, tixed to existing wooden surfaces with nails, complete all as specified and directed.
M&L 0.9 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified.
S&F Solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame, as per specification and drawings, complete all as specified and directed.
S&F 5mm thick PVC sheet fillet of width 35m for wall paneling,inclusive of fixing on walls to make PVC frame, as per specification and drawings, complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying three coats of white wash with brush, complete all as specified and directed.
M&L for preparation of new plastered surfaces of ceilings and applying three coats of white wash with brush, complete all as specified and directed.
M&L for complete removal of existing treatment on walls including cleaning, watering to make the surface clean and free from dust and applying three coats of white wash, complete all as specified and directed.
M&L for complete removal of existing treatment on Ceilings including cleaning, watering to make the surface clean and free from dust and applying three coats of white wash, complete all as specified and directed.
M&L cement concrete 1:5:10 type E2 using 40mm graded stone aggregate as in filling/ mass concrete, complete all as specified.
M&L for applying One coat of oil emulsion distemper with roller on old decorated surfaces of walls, including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed.
All as per item No.57 above, but on ceilings
M&L Preparing new plastered surfaces of Wall and applying two Coats of oil emulsion distemper over one coat of alkali resistant primer with roller, over 1mm thick plaster of paries, complete all as specified and as directed.
M&L for complete removal of existing treatment on walls including cleaning, watering to make the surface clean and free from dust applying 2 mm thick wall putty over plastered surfaces, finishing surfaces even and smoooth and applying two coats of oil emulsion distemper finished with rollers over a coat of alkali resistant primer as per manufacturer's instructions complete all as specified and directed.
All as per item No.60 above, but on ceilings
M&L for preparation of new plastered surfaces on walls and applying two coats of cement base paint over a coat of alkali resistant primer with brush, complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of walls and soffit of chajja, roof slab etc., of any description, over 10cm width or girth not otherwise described, finishing the surfaces with 2mm thick exterior wallcare putty (in two layers) for smooth finish and applying two coats of exterior acrylic emulsion weather proof paint over a coat of primer with roller, as per manufacturer's instructions, upto 4 storey height complete all as specified and as directed.
M&L for preparation of old treated plastered surfaces of walls and soffit of chajja, roof slab etc., of any description, over 10cm width or girth not otherwise described, by cleaning brooming, rubbing and scrapping as required using broom, emery paper, putty blades/scrapper as applicable to make the surface free from protrutions, loose particles, dust etc., including necessary safety & protective measures such as safety belt, headgear etc., applying one coat of exterior acrylic emulsion weather proof paint over a coat of primer with roller, as per manufacturer's instructions, upto 4 storey height, complete all as specified and as directed.
M&L for complete removal of existing treatment on walls and soffit of chajja, roof slab etc., of any description, over 10cm width or girth not otherwise described, by cleaning brooming, rubbing and scrapping as required using broom, emery paper, putty blades/scrapper as applicable to make the surface free from protrutions, loose particles, dust etc., including necessary safety & protective measures such as safety belt, headgear etc., finishing the surfaces with 2mm thick exterior wallcare putty (in two layers) for smooth finish and applying two coats of weather proof exterior emulsion paint over a coat of suitable exterior primer with roller of approved make and necessary scaffolding for upto 4 Story building height, complete all as specified and directed by Engineer -in-Charge.
M&L for preparation of old painted wooden surface of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint over a coat of Red Oxide/ Zinc Chrome Primer (First quality),, complete all as specified and as directed.
M&L Preparing new Steel or Iron Surfaces of any description, n exc 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint over a coat of Red Oxide/ Zinc Chrome Primer (First quality),, complete all as specified and as directed.
M&l for preparation of old painted steel surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of new untreated wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for 25mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded aggregate in sub bases of floors complete all as specified and directed.
S&F Vitrified coloured (light shade) Ultra charged tiles of 8 to 9 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 Sqm but not exc 1.28 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including screed bed 20mm thick in cement mortar 1:6 complete all as specified and directed.
All as per item No 72 here-in-before, but as in skirting on vertical surfaces, fixed over and incl 10mm thick rendering in cement mortar 1:3 complete all as specified and directed..
M&L for coloured non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over laid screed bed 15 mm thick cement mortar 1:4 complete all as specified and directed.
M&L for coloured glazed ceramic tiles in vertical surface 450X 300X 7mm/ 600x300mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles and fixed over and including backing coat of 15mm thick rendering in cement mortar 1:3 complete all as specified and directed.
M&L granite (of any type) work, 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, urinal partition and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and making moulds on edges laid over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
Providing edge moulding to 18-20mm thickness of granite stone any description of counters vanities etc including machine polishing to edge to give high gloss finish etc complete all as directed.
Removal of existing water proof treatment of any description from roof surface including cement plaster/screed bed and unreinforced concrete n exc 40mm thick (if required at site) carefully from the surfaces, roughening concrete surfaces and cleaning the roof surfaces by brushing, sweeping and scrubbing down with water and removal of debris out of MD land, complete all as specified and as directed. (Note: Dismantling and refixing of the earth strip is deemed to be included in the quoted rate if any)
M&L for brushing cement slurry @ 2.75 Kg/sqm over cleaned roof surface prior to application of concrete complete all as directed by Engineer - in - charge .
M&L for providing PCC (1:2:4) type 'B-0' (using 12.5mm graded crushed stone aggregate) mixed with water proofing compound @ 200 ml per bag of cement, surface finished even and smooth without using extra cement including complete all as a specified and as directed. (NOTE: Water proofing compound shall be measured and paid separately)
M&L 15 mm thick screed bed in cement mortar 1:3 over roof mixed with water proofing compound as per manufacturer's instruction complete all as specified and directed. (NOTE: WPC will be measured and paid separately)
M & L for cutting Grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 or cement concrete 1:2:4 type-B1 as required complete all as specified and directed.
M&L bituminous gola, with 80/25 bitumen and coarse sand mixture, 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces, all as specified and directed.
M&L for water proofing treatment on existing cleaned RCC roof with the following specifications and manufacturer's instruction complete all as specified and directed :- (i) Preparing and cleaning of fully dried surfaces as per IS 3067-1966. (ii) Applying bitumen primer conforming to IS:3384-1968 over the cleaned base @ 0.50 litre per sqm. (iii) Providing a layer of 3 mm thick APP modified pre-fabricated five layer, weight not less than 3.6 kg/sqm, black finished reinforced with non-woven polyster matt membrane with butane torch application. Overlap shall be minimum 100 mm on the transverse direction and 75 mm on longitudinal direction. (iv) Applying two coats of bitumen based UV reflective paint with aluminium finish @ 0.20 litre per sqm over APP membrane.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness including cover fillets complete all as specified.
S&F 100mm long fancy type brass handle cast type polish, bright complete all as specified
Re-fixing of aluminium snap grid system using serviceable grid sections and ceiling board obtained from taking down of false ceiling including hanging arrangements with supporting hangar 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. (NOTE: Ceiling board shall be measured separately)
S&F glass shelf assembly consisting of 5.5m thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified.
S&F "E" board "Classic" reinforced, designer series, ceiling board with HPSC of size 600mm x 600mm x4mm thick fixed on aluminium snap grid system, complete all as specified and directed.
Chipping of unsound /weak concrete materials including cover plaster from RCC structural member i.e. slabs, beams, columns, lintel, chajjas, fins, facia etc. of 50 mm average thickness (Any storey/ height of building/ structure) including tapering all edges, making square shoulders of cavities by air or sand blasting etc and cleaning of exposed concrete surface and reinforcement bars, lightly picking materials by air blasting or sand blasting including removal of foreign materials, loose concrete/aggregate etc and disposal of all debris out side of MOD land and complete all as specified and as directed. (NOTE: Measurement shall be considered for the surface area of RCC member)
M&L for applying chloride free rust removing chemical on rusting steel reinforcement bar as per manufacturer's specification and removing all rust from steel reinforcement bar by wire brush & sand/emery paper (after 24 hours of application of rust remover) and cleaning the area thoroughly by water with the help of pressure jet and allowing it to dry and making the reinforcement bar totally rust free (for any storey/ height of building/ structure) complete all as specified and as directed. (Make of Rust removing chemical :- Reebaklens RR of FOSROC or equivalent product other makes specified in tender) (NOTE: Surface area of cleaned steel reinforcement shall be measured for payment)
M&L for introducing new mild steel TMT reinforcement bars for structural connection in RCC beams, columns, lintel and slabs (for any storey/ height of building/ structure) including power drilling holes of appropriate diameters in reinforced or plain cement concrete to a minimum depth of 150mm and up to 200mm including power drilling, fixing the reinforcement in position using epoxy, cleaning of loose dust by blowing air, sealing with epoxy cartridges, plastic nozzles etc as per manufacturer's instructions etc all as specified and directed. (Make of epoxy chemical : Lockfix E75 of FOSROC / Hilti HY 150 or equivalent product other makes specified in tender) (NOTE: Reinforcement bars shall be paid separately)
M&L for preparation of old existing corroded and new introduced reinforcement surface (at any storey/ height of building/ structure) by brush and application of two component epoxy based zinc rich primer, of minimum specific gravity 1.75, adhesive bond strength with steel as 1.50N/mm2, as a protective coating to steel reinforcement bars in concrete with total zinc content in dry film >90% by volume and DFT per coat >50 microns complete all as specified and directed. (Make- Nitozinc primer of FOSROC or equivalent product in other makes specified in tender) (NOTE: Surface area of steel reinforcement shall be measured for payment)
M&L for applying a coat of epoxy bonding agent on existing concrete surfaces, with mixed density 1.48 Kg/litre and adhesive bond strength>2.50 MPs, mixed and applied as per manufacturer's specifications complete all as specified and directed. (Make- Nitobond EP of FOSROC or equivalent product in other makes specified in tender) (NOTE: Measurement shall be considered for the surface area of RCC member.
M&L for applying shrinkage controlled, polymer modified, fibre reinforced cementitious repair mortar, as per manufacturers instructions to get a compressive strength of 35 MPA after 28 days, finishing surfaces even and smooth complete all as specified and directed. (Make- Rendroc SP 40 of FOSROC or equivalent product in other makes specified in tender) (NOTE: Measurement shall be considered for the surface area of RCC member.
M&L for cutting the existing pipe line of GI 20mm bore and refixing with suitable tee 20x20x20mm/15x20x15mm dia, complete all as specified and directed.
Taking up or down GI Steel Water Tubing including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed for the following size of pipes :-
15mm bore outer dia
20mm bore outer dia
Supply, Laying and testing Steel Water Tubing, Galvanised, ‘Medium Grade’ with all Fittings, laid in trenches or any other Situation, complete as all specified and directed for the following size of pipes :-
15mm bore outer dia
20mm bore outer dia
Relaying/Re-fixing Galvanised Steel Tubing and Connections in New or Old Position (Serviceable Pipes and Fittings obtained from taking down item) after Cleaning both Inner and Outer Surfaces of Pipes by using of Wire Brush, fixed to walls and ceilings or laid in floors complete all as specified and as directed for the following size of pipes :-
15mm bore outer dia
20mm bore outer dia
S&F gun metal gate or globe valve, with iron wheel head, screwed both ends for iron pipe and fixed for 20 mm bore pipe complete all as specified and directed.
S&F in repair vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including making good to floor, complete all as specified and directed. (MAKE : CERA, Cat No: S3010109 / HINDWARE, Cat No. 20042 /ASIAN PAINTS, Cat No: WM-32-X / PARRYWARE, Cat No: C0126)
S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white and trap, including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc incl PVC seat cover complete all as specified and directed. (Make : Parryware, Model: Verve/CERA, Model: Celeb/ HINDWARE, Model: Superb S)
S&F vitreous china table top wash hand basin of size 420x420x135 mm (white) including all accessories etc., with 32mm dia Brass Chromium Plated Waste Fitting, making good disturbed Surfaces in Cement Mortar 1:3 complete all as specified and as directed. Make: Jaquar Cat No.ARS-39901 or equivalent in Kohlar & Parryware.
S&F vitreous china wash hand basin counter top of size 550x450x200mm, white with necessary arrangements complete all as specified of Make Parryware cat No Co431 Cascade NXT or equivalent model in Hindwarte/ Cera complete all as specified.
S&F Vitreous china, white, full stall urinal flat back with grating and union for discharge pipe (excl flush pipe and flushing cistern and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and Union for discharge pipe and PVC waste pipe, complete all as specified and directed. (Make of Urinal : CERA, Model: CAPRIANA / HINDWARE, Model: FLAT BACK LARGE / Jaquar, Cat No: URS-WHT-13261, PARRYWARE, Model: NEW MAGNUM) (Make of Waste Pipe: PRAYAG, Cat No: 327 or equivalent make as approved by GE) (Make of Waste Coupling: PRAYAG, Cat No: BEA-10 / JAQUAR. Cat No: ALD-705/ CERA, Cat No: F8050101)
S&F in repair vitreous china, wall hung coupled closet, white including vitreous china valveless symphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, PVC seat cover and connecting fittings including taking down existing water closet complete all as specified and directed. (Make : CERA, Model : CLAIR / PARRYWARE, Model: CASCADE NXT / HINDWARE, Model: CONSTELLATION)
S&F Chromium plated Hand shower (health faucet), brass body with 1.2 metre long flexible tube in chrome finish with wall hook complete all as specified and directed. (MAKE : JAQUAR, Cat No : ALD-573/ PARRYWARE, Cat No : T9941A1 / ESS ESS, Cat No: C-232Y / CERA, Cat No: F8030401AB / HINDWARE, Cat No: F160002)
S&F 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and incl with flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART or equivalent model in COMMANDER)
S&F in repair, 15 mm bore fancy type stop valves, cast copper alloy, chromium plated (concealed type), screwed down, high pressure, with crutch or butterfly handle, incl concealed body, screwed both ends for iron pipe or for unions and, complete all as specified and directed. (MAKE : JAQUAR, Cat No: CON-083FTK / PARRYWARE, Cat No : G1461A1 / ESS ESS, Cat No: T-108 / CERA, Model: OCEAN / PRAYAG, cat No: 9218/ HINDWARE, Cat No: F330052)
S&F in repair Chromium plated brass Angular stop cock, fancy type, concealed type with wall flange fixed to 15 mm bore iron pipe complete all as specified and directed. (Make : JAQUAR, Cat No: KUP-35053PM / PARRYWARE, Cat No: T3097A1 / CERA, Cat No: F1005201 / PRAYAG, Cat No: 9410 / HINDWARE, Cat No: 320006 )
S&F Chromium plated brass Bib cock with wall flange, fancy type, long body, fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : JAQUAR, Cat No: FUS-29037 / CERA, Cat No: F1015151/ PRAYAG, Cat No: 9306-N/HINDWARE, CAT No: F360004 /PARRYWARE, Model: CLARET)
S&F Chromium plated brass self closing pillar tap (premium quality), fancy type. with aerator, fixed to wash hand basin, as in repairs, complete all as specified and directed. (Make : JAQUAR, Cat No: OPP-15001PM / CERA, Cat No: F1005101/ ASIAN PAINTS, Cat No: SRPC101 / HINDWARE, Cat No: F360001 / PRAYAG, Cat No: 8102 or equivalent model in PARRYWARE)
S&F Pillar cock 190mm extension body for fixed to wash hand basin, as in repairs, complete all as specified and directed. (Make : JAQUAR, Cat No: KUP-35021PM or equivalent model in KOHLAR/ PARRYWARE)
S&F CP bottle trap with internal portion 32mm size with 190mm long wall connection pipe complete all as specified and directed (Make: JAQUAR, Cat No: ALD-769L250x190 / ESS ESS, Cat No: C-231C / HINDWARE, Cat No: F850003 / CERA, Cat No: F8060302/ PRAYAG, cat No: BEA-26)
S&F in repairs 15mm dia soap dish, square, acrylic body with chromium plated base complete all as specified and directed. (Make : Jaquar, Cat No : ACN-1131N / PARRYWARE, Cat No: T6403A1 / ESS ESS, Cat No: AC-703 / PRAYAG, Cat No: BA-35 or equivalent model in KOHLAR/CERA /HINDWARE)
S&F in repairs toilet paper holder, surface type with flap incl taking down existing holder complete all as specified and directed. (Make : JAQUAR, Cat No : CAN-1153N / CERA, Cat No: F5007110 / PRAYAG, Cat No: BA-38 / ESS ESS, Cat No: AC-506 / HINDWARE, Cat No: F880003 or equivalent model in KOHLAR/PARRYWARE).
S&F in repairs, Tubular towel rail (premium range), 20mm dia, 600 mm long between flanges including brass chromium plated, complete all as specified and directed. (MAKE : JAQUAR, Cat No : ACN-111SM / PARRYWARE, Cat No : T6401A1 / CERA, Cat No: F5004103 / PRAYAG, Cat No: BA-20 / HINDWARE, Cat No: F840013 )
S&F in repair Chromium plated brass Towel ring (premium quality) complete all as specified and directed. (Make : JAQUAR, Cat No: ACN-1121BN /Ess-Ess, Cat No: AC-502 / PARRRYWARE, Cat No: T6002A1 / PRAYAG, Cat No: BA-11 or equivalent model in JAQUAR / PARRAYWARE)
S&F in repair 15mm bore auto closing concealed urinal flush valve with wall flange, fancy type chromium plated incl all accessories complete all as specified and directed. (Make: JAQUAR, Cat No: PRS-073 / PARRYWARE, Cat No: G2030A1 or equivalent model in CERA / HINDWARE / PRAYAG)
S&F in repair chromium plated brass waste coupling, 32 mm size, full threaded complete all as specified and directed. (Make: PRAYAG, Cat No: BEA-11 / JAQUAR. Cat No: ALD-705/ CERA, Cat No: F8050101 /PARRYWARE, Cat No: T9911A1 / HINDWARE, Cat No: F850002)
S&F in repair chromium plated brass over head shower rose with arm (premium range), with 3 flow, fixed to 15mm bore of iron pipe including taking down existing shower complete all as specified and directed. (Make : CERA, Cat No: F7040103 (for arm) & F7020305 (for shower) / PARRYWARE, Cat No: T9802A1 (for arm) & T9986A1 (for shower)/ HINDWARE, Cat No: F160051)
S&F chromium plated Hand shower (health faucet), ABS body with 1.2 metre long flexible tube in chrome finish with wall hook, as in repairs, complete all as specified and directed. (MAKE : JAQUAR, Cat No : ALD-CHR-593/ CERA, Cat No: F8030401AB / ASIAN PAINTS, Cat No: C-232N / CERA, Cat No: F8030401AB / HINDWARE, Cat No: F160013 or equivalent model in PARRYWARE)
S&F in repair 15mm bore chromium plated two way bib cock with flange, fancy type complete all as specified and as directed. (Make : JAQUAR, Cat No: CON-041KN / Ess Ess, Cat No: C-203 / PARRYWARE, Cat No: G1434A1 / CERA, Model : OCEAN / PRAYAG, Cat No: 9212/HINDWARE, CAT No: F330004CP).
S&F corner glass shelf 300 mm with brass brackets, as in repair complete all as specified and directed. (Make: JAQUAR, Cat No: ACN-1173 / PARRYWARE, Cat No: T6010A1/ CERA, Cat No: F5005102/ PRAYAG, Cat No: BEA-44)
S&F in repairs Low density polyethylene pipe connection, comprising of 15 mm dia 450 mm long having PTMT union at each end complete all as specified and directed. (MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 or equivalent model in SHAKTI / JEXON)
S&F CP grating 102mm size fixed with white cement, as in repairs, complete all as directed. (Make : PRAYAG, Cat No : FT-04 or equivalent make as approved by GE)
S&F PVC corrugated waste pipe 38/40mm bore, complete all as specified and directed. (Make : PRAYAG, Cat No: 328 or equivalent in other makes specified in tender)
S&F in repair 600mm x 600 mm mirror with PVC frame and fixed to wooden plugs with chromium plated brass screw and cup washers complete all as specified and directed. (Make: PRAYAG, Cat No: 553 or Equivalent model in other makes specified in CA)
S&F bathroom mirror of size 900x600x6mm, complete all as specified and directed. (Make: PRAYAG, Cat No: BLM-03F or Equivalent model in other makes specified in CA)
S&F Stainless Steel Sink with Drainage Board l.0mm thick Overall size 915mm x 460mm and Bowl size 410 mm x 355 mm x 165 mm for Kitchen or Laboratory with Plugs, Washers, Brass chromium plated Waste Fitting 32mm dia, PVC waste pipe, a Pair of Cast Iron Brackets duly Painted including Cutting and Pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including Taking down/out unserviceable Sink and connected Items, complete all as specified and as directed. Make : NIRALI/ Prayag or equivalent ).
S&F in repair Stainless steel kitchen rack of size 31" x 24" x 10" fixed in wall with screws and washer including taking down existing rack complete all as specified and directed. (MAKE : PRAYAG, Cat No : P-340 or equivalent model in SUYOG / BLUE STAR / ANUPAM INDUSTRIES)
Dismantling of 100mm bore cast iron (sand cast) soil, waste or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required all as specified and directed.
S&F 100 mm bore cast iron (sand cast) soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls complete all as specified.
S&F 75 mm bore cast iron (sand cast) soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls complete all as specified.
S&F 100 mm bore cast iron (sand cast) soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified.
S&F 75 mm bore cast iron (sand cast) soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified.
S&F 100 mm dia CI branch pieces, complete all as specified.
S&F 75 mm dia CI branch pieces, complete all as specified.
S&F 100 mm bore CI (sand cast) bend any radius, diminishing pieces or tapers, complete all as specified.
S&F 75 mm bore CI (sand cast) bend any radius, diminishing pieces or tapers, complete all as specified.
S&F 100 mm dia CI branch pieces with ovel access door, complete all as specified.
S&F 100 mm dia CI bend with ovel access door complete all as specified.
S&F 75 mm dia CI bend with ovel access door complete all as specified.
S&F 100 mm dia CI sanitary connection socket to fit WC outlet complete all as specified.
S&F for cast iron floor trap/nahani trap with grating including jointing to waste pipes in cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate ,100mm dia outlet, complete all as specified .
S&F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stay, including bolts and nuts and securing ends of stays to wall or roof of 100 mm dia of pipes.
SCHEDULE 'A' PART-II (INTERNAL ELECTRIFICATION WORKS) Taking down copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc excluding light fitting for reuse or removing from site and making good disturbed surface of walls, floors etc. Complete all as specified and directed.
M&L for concealed type point wiring with 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and incl PVC conduit complete with all fittings and accessories (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for One light point or one fan point or bell point controlled by one switch or bell push complete all as specified and directed. (NOTE :- (i) Where tube light fitting is to be fitted/ suspended, CI Circular boxes shall be provided with the PVC Pipes in the ceiling & the unit rate shall be deemed to be included for the same. (ii) Quoted rate shall be exclusive of the cost of terminal box & laminate cover which shall be measured separately. (iii) Cost of cutting chases for concealed wiring shall be deemed to be inclusive in the quoted rates. No claim in this regard shall be entertained at a later stage)
All as per item No 149 here-in-before, but for one 5 pin 5/6 amp socket out let point in the same switch board of light points (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches
All as per item No 149 here-in-before, but for one 5 pin 5/6 amps multisocket outlet point in independent board (concealed wiring) (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches
All as per item No 149 above, but using 2.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core for line conductor and 2.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core for earth continuity wire for one 15/16 amp multi socket out let independent. (concealed wiring) (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches
S&F ceiling rose surface, polycarbonate/Bakelite, three terminals complete all as specified and directed.
S & F Modular Switch 1 way, 6 Amps, 1 module complete all as specified and directed.
S & F Modular Switch 1 way, 16 Amps, 1 module complete all as specified and directed.
S & F Modular Socket 6 Amps, 2/3 pin combined, 2 module complete all as specified and directed.
S & F Modular Socket 6/16 Amps, 2/3 pin combined, 2 module complete all as specified and directed.
S & F Modular Fan step regulator, 120 watt, 2 module complete all as specified and directed.
S & F Modular Blank plate, 1 module complete all as specified and directed.
S&F Modular White cover plate with frame 3 module complete all as specified and directed.
S&F Modular White cover plate with frame 4 module complete all as specified and directed.
S&F Modular White cover plate with frame 6 module complete all as specified and directed.
S&F Modular White cover plate with frame 8 module complete all as specified and directed.
S&F Modular White cover plate with frame 12 module complete all as specified and directed.
S & F Modular type Metal Flush box 3 module complete all as specified and directed.
S & F Modular type Metal Flush box 4 module complete all as specified and directed.
S & F Modular type Metal Flush box 6 module complete all as specified and directed.
S & F Modular type Metal Flush box 8 module complete all as specified and directed.
S & F Modular type Metal Flush box 12 module complete all as specified and directed.
S&F surface mounted LED luminaire, 1 X 20 Watt in aluminium housing, operating voltage 180-270 V, with acrylic/polycarbonate diffuser & integrated constant current electronic driver complete with all other accessories internally prewired and including connecting up with three core flexible copper wire of suitable size complete all as specified and directed. complying with the following specifications:- (a) minimum efficacy 110 lumen/watt (b) CRI not less than 80, (c) THD < 20% (c) having in built short circuit and surge protection (d) colour temperature not less than 5700 degree K (e) life not less than 25000 hours of operation
S&F recess mounted LED luminaries, of size 600 mm x 600 mm, in powder coated CRCA housing , having glare free diffuser, operating voltage 180-270V, with constant current electronic driver complete with all accessories with and including 35/36 Watt LED and including all accessories, mounting frame etc and connecting up with three core flexible copper conductor wire of adequate size complete all as specified and directed and complying with the following specifications:- (a) minimum efficacy 110 lumen/watt (b) CRI not less than 80, (c) THD < 20% (c) having in built short circuit and surge protection (d) colour temperature not less than 5700 degree K (e) life not less than 25000 hours of operation (f) Weather protection: IP20
Taking down of old Submain wiring any type including batten/ conduit/ casing at any indicated situation complete all as specified and directed.
M&L for sub main wiring with four run (P-N) of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 Sqmm 1100 Volts grade along with one run of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 Sqmm 1100 Volts grade as earth continuity conductor drawn through and including adequate size PVC non-metallic concealed conduit, complete all as specified and as directed. (NOTE : Five runs of single core 10.0 Sqmm cable and one run of PVC conduit shall be measured as one unit)
All as per Srl. Item No. 173 above, but with two runs of 6.0 Sqmm cable and one run of 6.0 Sqmm as earth continuity conductor drawn through PVC conduit (NOTE : Three runs of single core 6.0 Sqmm cable & one run of PVC conduit shall be measured as one unit)
All as per Srl. Item No. 173 above, but with two runs of 4.0 Sqmm cable and one run of 4.0 Sqmm as earth continuity conductor drawn through PVC conduit (NOTE : Three runs of single core 4.0 Sqmm cable & one run of PVC conduit shall be measured as one unit)
Taking down of Old MCB DB any type any size including MCCB/RCCB/MCBs and disconnecting the serviceable MCBs and keeping in safe custody for reuse at site or removal from site complete all as specified and directed.
Supply and fixing of MCB TPN DB 4 way Vertical type double door, IP-43 protection, isolated natural bar, insulated busbar assembly, mechanical impact strength of IK08, suitable for MCCB's upto 250 Amps as incomer complete all as specified and directed. complete all as specified and directed. (MAKE : L&T / LEGRAND / SCHNEIDER / ABB / PANASONIC / HAGER)
S&F MCB TPN DB 4 way double door, IP-43 protection, isolated natural bar, insulated busbar assembly 200 Amps, mechanical impact strength of IK08, complete all as specified and directed. (MAKE : L&T / LEGRAND / SCHNEIDER / ABB / PANASONIC / HAGER)
S&F MCB SPN DB 8 way double door, IP-43 protection, isolated natural bar, insulated busbar assembly 200 Amps, mechanical impact strength of IK08 complete all as specified and directed. (MAKE : L&T / LEGRAND / SCHNEIDER / ABB / PANASONIC / HAGER)
S&F MCCB 100 Amps 16 KA, four pole, 415 volt adjustable overload setting 0.8-1.0 x In complete all as specified and directed. complete all as specified and directed. (MAKE : L&T / LEGRAND / SCHNEIDER / ABB / PANASONIC / HAGER)
S&F MCB 'C' series, TPN, 415 volts, 63 Amps, breaking capacity 10KA complete all as specified and directed. (MAKE : L&T / LEGRAND / SCHNEIDER / ABB / PANASONIC / HAGER)
S&F MCB 'C' series, SPN, 40 Amps, breaking capacity 10KA complete all as specified and directed. (MAKE : L&T / LEGRAND / SCHNEIDER / ABB / PANASONIC / HAGER)
S&F MCB 'C' series, single pole, 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed. (MAKE : L&T / LEGRAND / SCHNEIDER / ABB / PANASONIC / HAGER)
S&F in repair MODULAR MCB protected power unit with one 25 Amps socket with 3 pin plug top and including 01 No MCB, DP, and starter 25 Amps ratings with six module plate and flush metal GI box and electrically connected complete all as specified and directed. (MAKE : HAVELLS, Cat No. DHDUCDP0253025 / NORTH WEST, Cat No: ACPU6M-BT or equivalent model in ABB / CRABTREE / HAGER / SCHNEIDER / LEGRAND) (NOTE : Enclosure & MCB shall be same manufacturer. Cost of MCB is deemed to be included in the quoted rate)
Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.
MS HORIZEN
M/S SRINIVASA CONSTRUCTION
MODERN AGENCY
M/S L.R.ENTERPRISES
KWALITY CONSTRUCTION
MARUTI ENTERPRISES
JAY MA TARA TRADERS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .