Special Repair/Renovation of Sub Health Centre at village Bhodhni in District Kurukshetra under health Wellness Centre Scheme) (Excluding EI)

Amount

Dismantling brick work, tile masonry or tile lining & tile tracing. In Cement (HSR 8.5 (b)

Removing doors & windows (wood & steel ) with chowkats by making recesses in the walls (HSR 8.18 (a) Doors )

Removing doors & windows (wood & steel ) with chowkats by making recesses in the walls (HSR 8.18 (b) Windows

Dismantling cement conglomerate/ terrazzo floors 25 mm to 50 mm thick i/c concrete base (HSR 8.26 )

Scraping Cement plaster (HSR 8.32 (c) )

Cement concrete 1:4:8 with stone aggregate 20 mm nominal size in foundation and plinth (HSR 10.38)

Providing and laying 80 mm thick ISI marked interlocking paver blocks conforming to IS 15658:2006 /IRC:SP:63-2004 of all Shapes and colours in design mix cement M-40 over a bed of 30 mm thick fine sand complete in all respect. (HSR 10.159).

First class brick work laid in cement sand mortar 1:4 in first storey up to 4 meters above plinth level.(HSR 11.9)

Terracing consisting of tiles 22.86 cm X 11.43 cm X 3.81 cm, laid over 87.50 mm mud filling, on a layer of 25 mm mud plaster and an other layer of mud mortar for laying the tiles including two coats of bitumen laid hot at 1.65 kg per sqm on top of RCC slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc. (HSR 13.13)

Providing & Fixing 100 mm PVC Rainwater Pipe 6 kg. pressure of ISI mark in cement mortar during masonry work. (a) 100 mm dia PVC pipe 6 kg. pressure. (Make Supreme, Phinolex, Prince or equvalent)(HSR-13.89 (a))

Providing and fixing vitrified tiles of size 600 x 600mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:-Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT, BELL, JOHNSONS.& RAK AND SIMPOLO. (HSR 14.89)

Pdg & fixing ceramic tiles/anti skid tiles of size 400mm x 400mm or above size of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles. Note:-Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT, BELL, JOHNSONS.& RAK AND SIMPOLO. (HSR 14.91)

Providing and fixing 1st quality ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manufacturer) of approved make in all colors, shades except burgundy, bottle green, black of any size as approved by Engineer-In-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete.(HSR 14.92) b) Size of ceramic Glazed tiles 300 X 450mm

Plastering on walls 12 mm thick cement plaster 1:4 (HSR 15.5)

15 mm thick cement plaster 1:4 on the rough side of single or half brick wall (HSR 15.10)

Applying pink primer or aluminum priming coat on wood work including preparation of surface, knotting and stopping etc. (HSR 16.2)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or matallic or plastered or concrete urfaces to give an even shadeas . ( HSR 16.3)

Distempering with washable oil bound distemper (of approved manufacture) two coats over one priming coat on new work. (HSR 16.58)

Providing two coats of exterior acrylic emulsion paint (b) 1st quality (HSR 16.79 (b)

Providing and applying two coats white cement based putty over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete (JK/Birla Make) (HSR 16.81)

Factory manufactured panelled and glazed door shutters of commercial hard wood, such as hollock, champ, chikrassy and chaplash,etc.,(non-coniferous timber other than teak,conforming to I.S.specification No.1003, kiln-seasoned),with 100 mm wide verticle styles, 150 mm wide lock rail, 200 mm wide bottom rail and 100 mm wide other rails, with panels of 12 mm thick commercial veneered both sides particle board or plywood of B.W.R. grade, hot-presses, including cost of iron hinges,screws,chocks/cleats,stops, and nails etc., complete,fixed in position (excluding the cost of any fittings,other than specified above,but including labour for fixing the same in position). ( HSR 17.91) (b) 35 mm thick (-) note .

Factory manufactured wire gauze door and window shutters of commercial hard wood such as hollock, champ, chikrassy and chaplash,etc.,(non-coniferous timber other teak, conforming to I.S.specification No.1003, kiln-seasoned),with 100 mm wide vertical styles, 150 mm wide lock rail, 200 mm wide bottom rail, and wire gauze of 140G or 120G designation including cost of iron hinges,screws,chocks/cleats,stops nail etc.,complete fixed in position (excluding the cost of any fitings,other than specified above,but including labour for fixing the same in position)- (style and rails of windows shutter shall be 75 mm wide) (ii) 35mm thick (HSR-17.92(ii) ) - Note

Supplying & fixing glass panes including special metal sash putty of approved make (b) glass panes 4 mm thick, exceeding 40sq dm areas. (HSR 18.30 (b) )

Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified section, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, lock notch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3:6 for lugs complete: - door and window frame of size 76 mm X 38 mm with 35 mm wide single rebate (HSR 18.34 (b) )

Providing and Fixing in position Best Indian Make (As Approved By The Engineer-In-Charge) European Type Water Closet Suit, Syphonic Type, Consisting of- Vitreous China Ware Syphonic Suite with 15 litres Capacity Matching CHINAWARE CISTERN and all internal brass fittings COMPLETE WITH ‘P’ or ‘S’ TRAP with or without vent; (as approved by the Engineer-in-charge). One Piece SEAT AND LIDIN HOLLOW BLACK OR WHITE PLASTIC fitted with chromium plated hinges and rubber buffers,(to the approval of the Engineer-in-charge). COMPLETE in all respects including cutting and making good the walls and floors. (b) Double trap syphonic (ii) Single Color. [HSR 30.5 (b) (ii)].

Providing and fixing in position best Indian make (Ordinary) lavatory suites consisting of Lavatory in vitreous chinaware size as given below ( to the approval of the Engineer-in-Charge) including China plug for tap hole where necessary R.S. or C.I. brackets for building into wall including painting; 32mm C.P. Brass waste with C.P. brass chain and rubber plug. 15mm C.P. Brass screw down pillar tap with jamnuts or couplings best design(as approved by Engineer-In-Charge) All fittings best Indian make and to the approval of the Engineer-in-Charge. All fittings best Indian make and to the approval of the Engineer-in-Charge. All brass work chromium plated and complete in all respects including cutting and making good the walls floors and painting of fitting etc. Mixed Colour Size 550mm x 400mm with one no. tap (HSR- 30.41) ( c ) (iv)

Providing and fixing in Position 32mm dia.G.I.Waste Pipe embedded in Wall or lead waste pipe (weighing 3.47kg. per metre and 2.8 mm thick) upto floor level including cost of wipped solder joint etc., complete (as required by the Engineer-in-charge) [HSR 30.48].

Providing and fixing in position best Indian make Soap dish fixed into wall with C.P. brass screws and complete in all respects including cutting and making goods the walls etc. (a) C.P. Brass (i) Soap dish Large. [HSR 30.70 (a) (i)].

Providing and fixing in position 15mm i/d C.P. brass bib cocks of best quality (as required by the Engineer-in-charge). [HSR 30.75]. (a) Bib cock long body.

Providing & fixing in position C.P. brass stop cock (as approved by the engineer-in-charge). (a) 15 mm Stop cock. (ii) Concealed stop cock with flange. [HSR 30.76 (a) (ii)].

Providing and fixing in position automatic brass ball valves in tanks. (b) With Plastic Ball (ii) 20 mm internal diameter. [HSR 30.110 (b) (ii)].

Providing and Fixing HDPE WATER STORAGE TANKS of Sintex, Diplast, O.K. Supreme make with covers/lids marked with IS:12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing overflow and scour provisions with suitable plug on scour pipe including cost of nipples, washers flages for connections in tanks complete in all respects to the satisfaction to the Engineer-in-Charge. [HSR 30.119]. 1000 Ltrs. Capacity Water Tank

Providing and laying 200 mm thick granular sub base consisting of drainage layer confirming to Table 400.1 Grading –VI of MORT&H 5th edition, mixing in a mechanical mix plant at OMC, carriage of mix material to the site of work, spreading in uniform layer with motor grader on prepared surface and compacting with vibratory power roller to achieve desired density complete as per clause No.401 of MORT&H specifications for road & bridge (5th Revision) of 2013. (NS).

Recovery Items:- Door, Reserve price @ Rs. 500/- Each

Windows, Reserve price @ Rs. 300/- Each

Good Tiles, Reserve price @ Rs. 5/- Each

Tiles Bats, Reserve price @ Rs. 500/- Cum

The Maanya Cooperative Labour and Const society Ltd

THE SS MULTIPURPOSE COOPERATIVE SOCIETY