Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.7 LAccepted-AOC | L1 | Accepted-AOC L1 bidder | |
| 2 | L2₹49.1 L+₹1.6 L (3.46%)Rejected-Finance | L2 | Rejected-Finance other than L1 bidder | |
| 3 | L3₹50.0 L+₹2.6 L (5.39%)Rejected-Finance 1 16 70 SAI NAGAR COLONY ALWAL SECUNDERABAD 500 015 | SECUNDERABAD | HYDERABAD | TELANGANA | 500015 | L3 | Rejected-Finance other than L1 bidder | |
| 4 | L4₹51.7 L+₹4.3 L (9.05%)Rejected-Finance | L4 | Rejected-Finance other than L1 bidder | |
| 5 | L5₹53.0 L+₹5.6 L (11.7%)Rejected-Finance | L5 | Rejected-Finance other than L1 bidder |
Tender Value
₹40.8 L
EMD Value
₹90,000
Closing Date
1 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (ARMY) SECUNDERABAD
CWE (ARMY) MUDFORT COMPLEX, SECUNDERABAD- 500003
COMPREHENSIVE MAINTENANCE INCLUDING BR AND EM (INTERNAL AND EXTERNAL SERVICES) AT JCOs MD ACCN AT IMH LINE UNDER AGE BR (S) NO I OF GE (SOUTH) SECUNDERABAD
2023_MES_608668_3
82095
Open Tender
Civil Works
Item Rate
180 days
Secunderabad
As per NIT
7 documents required · 7 mandatory
₹500
GE (South) Secunderabad
₹90,000
Yes
18 Feb 2024
11 Dec 2023
8 Jan 2024
11 Dec 2023
1 Jan 2024
18 Dec 2023
Amount
Demolition of cement concrete (un-reinforced ) in ground floors and pavings not exceeding 15cm thick(below or above ground level ) complete all as specified and as directed.
M&L for 40 mm thick for PCC (1:2:4) type B1 20 mm graded stone aggregate as in flooring finished even and smooth using extra cement complete all as specified and as directed.
S&F for plastic dividing strips, 3mm and width of strip 38mm complete all as specified and directed.
M&L for 75mm thick plain cement concrete in (1:3:6) type C1 using 20 mm graded aggregate as in plinth protection finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.
Dismantling floor hearth wall tiling including cement mortar bedding (but not backing) including rubbish off the premises complete all as specified and as directed.
M&L for 25 mm thick for PCC (1:2:4) type B1 20 mm graded stone aggregate as in flooring finished even and smooth using extra cement complete all as specified and as directed.
M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate 75 mm thick as in sub base complete all as specified and directed.
M&L for Non - skid Ceramic joint free coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.
M&L for glazed ceramic coloured tiles in vertical surfaces size 350x250x7mm/ 450x350x7 thick, , set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick plaster in CM 1:4 as in skirting / dados etc complete all as specified and directed.
M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.
M&L for Machine cut cudappah stone slab 20-25mm thick over 20 mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry and pointed with white cement mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
M&L Cement Concrete Chequred colour tiles 250 X 250 X 22mm/300mmx300mmx22mm jointed with white cement & pigment and pointed in colour / white cement to match the shade of tile over 20 mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for Plain cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate ) as in edging/ hold fast etc complete all as specified and directed.
M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) joint free area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting/dados etc. over 10mm thick rendering in CM (1:4) on walls such as backing of tiles complete all as specified and as directed.
Taking down cement plaster from brick or stone walls, ceiling etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick works in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 5 mm thick on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and as directed.
M&L for 15 mm thick rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even without using extra cement incl mixing of water proofing compound complete all as specified. (Note: Water Proofing compound shall be measured and paid for separately)
M&L for making good of the fallen/broken portion of the RCC Roof/Ceiling with proper reinforcement binding & application of antifungal paint for avoiding rusting of old steel reinforcement complete all as specified and directed.
M&L for applying two coats of oil bound distemper over a coat of primer including prepartion of new surfaces on walls complete all as specified and as directed.
M&L for applying three coats of white wash on ceiling including perpartion of new plaster surfaces complete all as specified and as directed.
M&L for applying two coats of cement base paint on new plastered surfaces of wall including preparation of surfaces over a coat of priming paint complete all as specified & directed
Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each incl wooden/steel windows/ventilators etc complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutter from the frames ) exceeding 1.5 Sqm but n exc 4.00 sqm each incl steel windows etc complete all as specified and as directed.
Taking down shutters of any description exc 1 sqm but n exc 2 sqm each complete all as specified and as directed.
M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions complete all as specified and as directed.
M&L for Factory made solid panel laminated PVC door shutter 30mm thick (style) consisting of frame made out M.S tube for top & bottom rails. M.S Srame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing complete all as specified and as directed.
S & F Anodiesed aluminium frame for doors, windows ventilators with one or more rebets including jointing cleats for fixing etc complete all as specified & directed.
S & F anodised aluminium window and ventilator shutters, sliding type without sash bars aluminium sections weighing 0.55Kg per M including necessary jointing cleats, glazing chips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittings such as suitable handle (1No) complete all as specified.&directed.
S&F 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin type C-21 anodised and fixed complete all as specified and as directed.
S&F 75mm long MS butt hinges, medium weight cold rolled. Make:- Crown/Swastik complete all as specified and as directed.
S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins or spring clips and providing and fixing new clips or pins, all as specified and directed.
M&L for sheet glass ordinary quality 3 mm thick fitted with beeding/putty n.exc 0.5 sqm each complete all as specified and as directed.
M&L for sheet glass ordinary quality 3 mm thick fitted with beeding/putty n.exc 0.5 sqm each sheet glass is ground or obscured or frosted, on one side and fixed complete all asspecified and directed.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with galvanised wire staples. compete all as specified an directed.
S&F repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with galvanised wire staples. compete all as specified an directed.
M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and as directed.
M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and as directed.
S&F for Factory made 35mm thick 2nd class hard wood, plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete, complete all as specified and as directed.
S&F 35 mm thick flush shutter ,solid core construction ,with block board core and plywood face panels ,commercial type complete all as specified and as directed.
M & L for glazed and skeleton shutters 30mm thick 2nd class hard wood open rebated and prepared to receive glass divided into squares with plain chamfered or rounded or mitred and rebated sash bars any numbers, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass, sizes of members as specified in SSR Part I, section 8 clause 8.20 (a) complete all as specified and as directed.
S&F repairs Mild Steel butt hinges 100mm long medium weight cold rolled mild steel etc all as specified and directed.
S&F repairs Mild Steel butt hinges 75mm long medium weight cold rolled mild steel etc all as specified and directed.
S&F aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt, all as specified and directed.
S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 250mm long all as specified and directed.
S&F 300mm long ordinary rat tail rod pattern spring incl roller and plate complete all as specified and directed.
S&F aluminium handles fabricated type, anodised, 150 mm size complete, all as specified and directed.
S&F in floor door stopper of aluminium alloy body of 140mm long complete all as specified and as directed.
S&F in repairs floor door stopper of aluminium alloy body of 140mm long complete all as specified and as directed.
M&L for Bands, straps, supports or stays for rain water, ventilating pipes, incl bolts if required clamps, holdfasts, wall ties etc,and similar work conforming to Fe-290- Gde-E-165, all as specified and directed.
Preparation of new wooden or wood based surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.
S&F in repairs 75mm size mild steel hasp and staple, safety type, stove enamelled, including bolt to hinge plate and fixed with bolts and nuts complete all as specified and as directed.
S& F in repairs 40mm dia, cup board knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.
Dismantling water tanks exc 250 and n exc 500 Ltrs capacity of any type or size complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of Capacity 500 Llitres including PTMT ball valve high pressure of 20mm complete all as specified and directed.
S&F in repairs Gun metal globe or gate valves high pressure with polythene float and fly nut complete screwed for iron pipe or for unions of 20 mm bore and complete all as specified and directed.
S&F in repairs Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 20 mm bore complete all as specified and directed. (Min Wt 20mm- 210 gms)
S&F in repairs vitreous china wash down water closet (pedestal pattern) with plastic seat and cover including PVC low level flushing cistern 10 ltrs capacity,flush pipe of polythylene of low or high density or PVC 32 mm dia , PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F in repairs Vitreous china wash hand basin white flat back size 550x400mm including brackets, CP pillar cock (fancy type )of 15mm bore, CP waste fittings 32mm, incl waste pipe complete all as specified and directed.
S&F in repairs Vitreous china orrisa pan squatting pattern 580 X 440mm with integral foot rests including P or S trap, PVC low level flushing cistern 10 ltrs capacity complete all as specified and as directed.
S&F in repairs PVC low level flushing cistern 10 ltrs capacity white , with inlet ball valve , float and handle including brackets , Flush pipe of polythylene of low or high density or PVC 32 mm dia , PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F in repairs 125 mm dia brass chromium plated shower rose with swivel joints complete all as specified and as directed.
S&F in Repairs Pillar taps fancy type , cp brass chromium plated screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly–nuts, screwed for 15 mm bore iron pipe complete all as specified and as directed.
S&F in Repairs fancy type bib taps,cp brass chromium plated with capstan head, screwed down, screwed for 15 mm bore iron pipe complete all as specified and directed.
S&F Stop valves, cp brass chromium plated, fancy type with capstan head screwed down, high pressure, screwed both ends for 15 mm bore iron pipe or for unions complete all as specified and as directed.
S & F in repair 15 mm dia stop valves cp brass chromium plated with long shank (concealed), screwed both ends for iron pipe complete all as specified and as directed.
S&F in repairs Tubular Towel rail 20mm dia, D type, 60cm long between flanges of brass chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and directed.
S&F in repairs chromium plated health faucet with 125 cm long flexible hose and wall hook complete all as specified and as directed.
S&F in repairs 20/25mm dia CP decorative type draphery curtain rods with brackets of approved pattern and quality complete all as specified and as directed.
S&F in repairs soap dish vitreous china white any type fixed to plugs with chromium plated brass screws complete all as specified and as directed.
S&F in repairs 32 mm dia waste coupling of PTMT(Half or Full thread) complete all as specified and as directed.
S&F in repairs PVC connection pipe 15 mm size PTMT nut 450 mm long complete all as specified and as directed.
S&F in repairs 32mm dia PVC waste pipe of 1.20 mtr long for wash hand basin of pressure rating 10 kgf/Sqm complete all as specified and as directed.
S&F in repairs 40mm dia PVC waste pipe of 1.20 mtr long for sink of pressure rating 10 kgf/Sqm complete all as specified and as directed.
PVC (SWR) floor trap, plain with grating including jointing with solvent cement of size 75mm complete all as specified and as directed.
S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratary with plugs washer and wastes including bedding in cement mortar to drawf wall or including fixing cantiliver brackets and connecting union to pipes overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed..
S&F in repairs for stainless steel plate rack of size 1200x900mm of approved make and quality complete all as specified and as directed.
S & F steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls,(concealed) 15mm bore.including taking down old pipe complete all as specified and as directed.
S & F steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls, 20mm bore.including taking down old pipe complete all as specified and as directed.
Demolition and breaking up drain AC pipes/PVC pipe set in cement mortar of any size complete all as specified and as directed.
S&F PVC (SWR) pipes single socketed , in any length with rubber ring joints, fixed to walls bore of the pipe 110mm complete all as specified and as directed.
S&F PVC (SWR) pipes single socketed , in any length with rubber ring joints, fixed to walls bore of the pipe 75mm complete all as specified and as directed.
S&F PVC (SWR) bends 110mm all as specified and as directed.
S&F PVC (SWR) bends 75mm all as specified and as directed.
M&L in Repairs 2nd class hard wood plain fillets, square, rectangular in section wrought screwed with nails area exceeding 13 sqcm but n exc 25 sqcm
M&L in Repairs for prelaminated particle board of 18/19mm thick interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with timber frame work of cupboards book cases etc complete all as specified and as directed.
S&F hasp & staple 100mm size aluminium anodised fixed with screws complete all as specified and as directed.
S&F continous (Piano) hinges , mild steel, bright finished or electrogalvanised width of flaps in 30mm complete all as specified and as directed.
S&F 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished of approved quality complete all as specified and as directed.
S&F in repairs 15mm bib tap standard of PTMT any colour high pressure screwed for iron pipe (Min Wt 15mm- 90 gms) complete all as specified and as directed.
S&F in repairs 15mm pillar tap of PTMT any colour high pressure screwed for iron pipe (Min Wt 15mm- 110 gms) complete all as specified and as directed.
S&F in repairs 15mm stop valves of PTMT any colour high pressure screwed for iron pipe (Min Wt 15mm- 90 gms) complete all as specified and as directed.
S&F in repairs of swivel shower rose of PTMT of any colour fixing with 15mm pipe (Min Wt 40gms) complete all as specified and as directed.
Cleaning of RCC/PVC water tanks with bleaching powder disconnecting the connection & removing all scales and dirt etc from tanks & from mouth of circulating pipes etc including writing with paint out side tanks " tank cleaned on with month and year " capicity of tanks exc 250 & n exc 500 ltrs and recconneting ,air lock complete all as specified.
M&L for Plain cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate ) as in Coping etc complete all as specified and directed.
Cleaning of choked Sewer line of any description by rodding with green bamboo stick/cane stick and flushing with water complete all as specified for 200mm dia size of pipe complete all as specified and as directed.
Cleaning of choked Sewer line of any description by rodding with green bamboo stick/cane stick and flushing with water complete all as specified for 150mm dia size of pipe.
Cleaning of choked Sewer line of any description by rodding with green bamboo stick/cane stick and flushing with water complete all as specified for 100mm dia size of pipe.
Cleaning of shurbs /bushes arround the septic tank, filter bed, manholes and along the sewage line etc all as directed
Excavation in trenches n.exc. 1.5m wide and n.exc. 1.5m in depth for taking up/laying sewer lines and getting out in hard and dense soil all as specified and directed.
Demolition and breaking up drain pipes 100mm dia ( Salt Glazed ware, AC or reinforced concreteor PVC ) set in cement mortar including PCC bed and haunching and removal of debris outside the MD land complete all as specified and as directed.
Demolition and breaking up drain pipes 150mm dia ( Salt Glazed ware, AC or reinforced concrete) set in cement mortar including PCC bed and haunching and removal of debris outside the MD land complete all as specified and as directed.
All as per item No.109 above but 200mm dia.
M&L for Salt Glazed Stoneware pipes grade 'A',100mm bore,laid in trenches and jointed all as specified and directed.
M&L for RCC NP2 class 150mm bore laid in trenches and jointed complete with collars all as complete and as directed.
All as per item No. 107 herein before but 200mm bore.
M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) for bed to drain pipe 100mm bore including packing under and haunching against the sides of pipes after they are laid and tested all as specified and directed.
All as per item No. 109 herein before but bed to150mm bore.
All as per item No. 109 herein before but bed to 200mm bore.
Supply and fix 110 mm bore PVC (SWR) junction single 'T' equal or unequal complete all as specified and as directed .
Supply and fix 110 mm bore PVC (SWR) bend , any radius complete all as specified and as directed.
Supply and fix 75 mm bore PVC (SWR) Vent Cowl complete all as specified and as directed.
Returning, filling in soil including spreading, levelling, watering and well ramming in layers n.exc. 25cm complete all as specified and as directed.
Removing of excavated soil to a distance n.exc 50m and depositing where directed at alevel n.exc 1.5m above starting point complete all as specified and as directed.
Demolition of RCC cover slab for manholes etc.
M&L for pre-cast reinforcement cement concrete (1:2:4) Type B-1, using 20 mm graded stone aggregate as in cover slab for manholes etc.and set in cm 1:6 complete all as specified and as directed.
S & F mild steel TMT bars 6mm to 8 mm dia cut to length bent to shape required including cranking bending etc TMT bars complete all as specified and as directed.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 100 mm dia SWG pipe complete all as specified and as directed.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150 mm dia SWG pipe complete all as specified and as directed.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 200 mm dia SWG pipe complete all as specified and as directed.
Demolition of Bricks or stone masonry built in cement mortar complete all as specified.
M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:4) as in manholes, septic tank, filter bed, walls, drains etc complete all as specified and as directed.
M&L for walling of squared rubble masonary (Secunderabad type) , recangular coursed, well bonded, bedded and solidly hearted, built in CM (1:6)
M&L for flush pointing to squared rubble masonry coursed or uncoursed in CM (1:3) complete all as specified and as directed.
Material and labour for Washing, rubbing down and stopping of old distempered surfaces of walls incl filling all cracks with approved crack filler and applying one coat of oil bound distemper, complete all as specified and directed. NOTE : Oil emultion distemper will be done by SPRAY only, after complete removal of old loose flakes complete all as specified and as directed.
Material and labour for Washing, rubbing down and stopping of old ceiling surfaces incl filling all cracks with approved crack filler and applying one coat of white wash , complete all as specified and directed. NOTE : white wash will be done by SPRAY only,
Material and labour for complete removal of existing treatment, preparation of surfaces of walls incl filling all cracks with approved crack filler and applying two coats of cement based paint over a coat of primer complete all as specified and directed. NOTE : Cement base paint will be done by spray only, after complete removal of old loose flakes.
Material and labour for preparation of old painted steel surfaces exc. 10cm in width and girth and applying one coat of synthetic enamel paint,complete all as specified and directed.
Material and labour for preparation of old painted wooden surfaces exc. 10cm in width and girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
Material and labour for Writing letters or figures (Block, Roman, Italic or Indian) not exc 30cm height with white colour synthetic enamel writing paint on circular or rectangular black back ground of suitable size complete all as specified and directed.
Demolition of cement concrete of any description and in any position not otherewise specifically provided for as in sunken floor, roof incl tarfelt etc complete all as specified and as directed.
M&L for plain cement concrete 1:5:10 type E-2 using 40 mm graded aggregates as in floor filling complete all as specified and as directed.
Rendering 15mm thick in CM 1:3 using water proofing compound as per manufacture instruction finished even and smooth with out using extra cement as in sunken floor complete all as specified and as directed (Note: WPC will be measured and paid separately)
M&L for providing water proofing felt having glass fibre non woven reinforcement and weighing 3 to 4 kgs /Sqm (APEX or Equivalent as specified) in 100 mm overlaps both longitudinally and transversely by torch bonding over coat of hot blown bitumen 85/25 at the rate of 1.2 kgs per sqm as in sunken floor ( bottom and vertical surfaces ) complete all as specified and directed
M&L for 40mm thick plain cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in padding (level course) on roof finishinf cement concrete surfaces even & smooth without using extra cement complete all as specified and as directed.
M&L for rendering 10 mm thick in CM (1:3) using water proofing compound as per manufacturer instruction as in roof and chajjas finishingcement concrete surface even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound will be measured and paid separately.
(a) M & L for applying a coat of 85/25 bitumen based primer over the plastered surfaces @0.30kg/Sqm. (b) Providing and laying APP based polymeric membrane of 3 mm the thickness of weight not less than 3.50 Kg/sqm on primed surface by means of torch application with side overlap of 100mm both longitudinally & transversely. (c) Over App membranes applying a coat of bituminious primer of 85/25 grade @1.20It/sqm and over this primes a coat of aluminium paint @0.20 It/sqm complete all as specified and directed.
Taking down existing unserviceable point wiring of any type/ size of light/fan/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site area complete all as directed and as directed.
Taking down carefully by unscrewing from boards/outlet boxes,switches,bell push,socket outlets,fan regulators,buzzers,holder and taken as schedule of credit, complete all as directed and as directed.
M & L for Point wiring complete with two runs of 1.5 Sq mm copper conductor (for Phase and neutral) PVC insulated unsheathed multi stranded ,copper conductor FRLSH cable of 1100V grade confirming to IS- 694 drawn through and including new non metallic rigid PVC conduit medium grade , ISI marked , 20 mm bore with conduit accessories on wall /floor including provision of fabricated branded pressed steel terminal box of suitable sizes with 1.6mm thickness duly painted inner and outer side by anti corrosive paint for housing the switches,sockets,fan regulators etc and covered with 3mm thick plastic laminated sheet cover with cadmium plated screw ,cup washer etc. complete concealed in walls and provn of 1.5 Sqmm PVC insulated unsheathed copper conductor cable of green colour to common earth dollyetc. complete all as specified and as directed for one light point controlled by one switch. Note1: The wiring shall be done in proper color coding using red,yellow,blue for phases , black for neutral and green for earth.
All as per Sl item No 142 above but for One light point controlled by two way switch 5 amps, SP complete as specified and directed.
All as per Sl item No 142 above but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete as specified and directed.
All as per Sl item No 142 above but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board complete as specified and directed.
All as per Sl item No 142 above, but for One Bell point controlled by one, bell push complete all as specified and as directed.
M & L for Point wiring complete with two runs of 4 Sq mm copper conductor (for Phase and neutral) PVC insulated unsheathed multi stranded ,copper conductor FRLSH cable of 1100V grade confirming to IS- 694 drawn through and including new non metallic rigid PVC conduit medium grade , ISI marked , 20 mm bore with conduit accessories on wall /floor including provision of fabricated branded pressed steel terminal box of suitable sizes with 1.6mm thickness duly painted inner and outer side by anti corrosive paint for housing the switches,sockets,fan regulators etc and covered with 3mm thick plastic laminated sheet cover with cadmium plated screw ,cup washer etc. complete concealed in walls and provn of 4 Sqmm PVC insulated unsheathed copper conductor cable of green colour to common earth dollyetc. complete all as specified and as directed for one light point controlled by one switch. Note1: The wiring shall be done in proper color coding using red,yellow,blue for phases , black for neutral and green for earth.
M & L for Point wiring complete with two runs of 1.5 Sq mm copper conductor (for Phase and neutral) PVC insulated unsheathed multi stranded ,copper conductor FRLSH cable of 1100V grade confirming to IS- 694 drawn through and including new casing accessories on wall / floor, including provision of fabricated branded pressed steel terminal box of suitable sizes with 1.6mm thickness duly painted inner and outer side by anti corrosive paint for housing the switches,sockets,fan regulators etc and covered with 3mm thick plastic laminated sheet cover with cadmium plated screw ,cup washer etc. complete concealed in walls and provn of 1.5 Sqmm PVC insulated unsheathed copper conductor cable of green colour to common earth dolly etc. complete all as specified and as directed for one light point controlled by one switch.Note: The wiring shall be done in proper color coding using red,yellow,blue for phases , black for neutral and green for earth
All as per item No .148 Above but for One light point controlled by two way switch 5 amps, SP complete as as specified and directed.
All as per Sl item No.148 but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete as specified and directed.
All as per Sl item No.148 but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board complete as specified and directed.
All as per Sl item No.148 but for One Bell point controlled by one, one way switch 5 amps, SP complete all as specified and as directed.
M & L for surface type Point wiring complete with two runs of 4 Sq mm copper conductor (for Phase and neutral) PVC insulated unsheathed multi stranded ,copper conductor FRLSH cable of 1100V grade confirming to IS- 694 drawn through and including capping and accessories on wall/ floor, including provision of fabricated branded pressed steel terminal box of suitable sizes with 1.6mm thickness duly painted inner and outer side by anti corrosive paint for housing the modular switches,sockets,fan regulators etc and covered with 3mm thick steel plates complete concealed in walls and provn of 4 Sqmm PVC insulated unsheathed copper conductor cable of green colour to common earth dolly etc. complete all as specified and as directed for one light point controlled by one switch. Note: The wiring shall be done in proper color coding using red,yellow,blue for phases , black for neutral and green for earth
S & F switch piano single pole flush type 5 amps, 230 volts, complete as as specified and directed.
S & F Switch piano two way flush type 5 Amps capacity 230 volts, complete as as specified and directed.
S&F bell push 5 A flush type, complete as as specified and directed.
Supply and fix socket outlet flush type multipurpose 2 in 1, 3 Pin, 5 amps, 230 volts complete all as directed and as directed.
S & F switch socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1 230 Volts complete all as directed and as directed.
S & F switch socket combination 5 in 1 multipurpose 3/5 pin 5/15 amps flush type with complete all as directed and as directed.
S & F electronic type regulator single module stepped heavy duty for ceiling fan suitable to work on 230 volts complete all as directed and as directed.
S & F electronic type regulator two module stepped heavy duty for ceiling fan suitable to work on 230 volts complete all as directed and as directed.
S&F bell (buzzer/ding dong) working on 230 volts AC Supply complete all as directed and as directed.
S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings complete all as directed and as directed.
S & F wall mounted 2 ft LED batten of 10 watt with LED Lamp, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete including taking down complete all as directed and as directed. Make : Havells Cat No.LHEXACP5IN1W010 or its equivalent make, complete all as directed and as directed.
S & F 4 ft box type tube light fitting with LED Tube rod of 20 watt , extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete including taking down complete all as directed and as directed. Make: Havells Cat No REGALBATTEN8UPTO1X22WSSBSWH and CRYSTAL12T8DSTL20WLED865SGLASS/ LUKER Cat No LLTS1 or its equivalent make, complete all as directed and as directed.
Supply and Fix 4ft LED Batten of 20 Watt with alumium housing & integrated electronic driver complete including taking down complete all as directed and as directed. Make: Havells Cat Part No LUMILINENEOBS20WLED865SPCWH or its equivalent make.
Supply and Fix 4ft LED tube rods of 20 Watt complete including taking down all as specified and directed Make: Havells Cat Part No CRYSTAL1213T8DSTL20WLED865SGLASS or its equivalent make.
S & F Security Light of 25 watt with single die ceramic base high power LED light source with IP66 protection, PDC housing & aesthetic finess disign and high impact resistance(IK08) toughened glass cover and street light optics for lighting of internal B2 category for outdoor lighting suitable for bracket dia 32mm to 40mm having color temparature 4000K complete with necessary M&L braket made out of GI pipe of suitable dia not less than 1.2 mtr long and dixed on walls with 2 nos MS clamps made out of MS flat of suitable size thick cmplete with MS nuts bolt,washers etcbent to required shape complete including taking down old unserviceable one complete all as directed and as directed.
M & L bracket made out of GI pipe of 25mm dia not less than 1.2 mtr long and fixed on walls with 2 nos MS clamps made out of MS flat of suitable size thick complete with MS nuts, bolts and washers etc bent to required shape complete including taking down complete all as directed and as directed.
S & F 10 watt bulk head luminaire suitable for outdoor with high brightness giving glare free light and including taking down complete all as directed and as directed. Make :Havels Cat Part No HEXAFT10WKED857SSYMBOPC or its equivalent makes
S & F MCB SP 6 to 32 Amps 240 volts of 'C' type characteristic DIN rail bicontact terminal for fixing on MCB DB's including revmoving the existing unserviceable one, complete all as directed and as directed.
S & F MCB SPN 40 to 63 Amps 240 volts of 'C' type characteristic DIN rail bicontact terminal for fixing on MCB DB's including revmoving the existing unserviceable one, complete all as directed and as directed.
S & F sheet metal enclosure MCB DB SPN 8 way with 100 amps rated bus bar 240 volts double door with locking system including removing the existing unserviceable one and making good the distrubed surface to match with the existing surface complete all as directed and as directed.
All as per Sl item No 183 here in before, but SPN 12 way DB, complete all as directed and as directed.
S & F Horizontal type TPN DB 4 way double door made out of CRCA sheet housing duly powder coated & confirming to IS specification including removing the existing unserviceable one and making good the distrubed surface to match with the existing surface complete all as directed and as directed.
S & F Vertical loadline type TPN DB 4 way double door with incoming as MCCB. TPN 100A 16 KA 415 volts-01 No. AC 3 phase 50 Hz with thermally adjustability of 80 to 90% IS specification made out of CRCA sheet housing duly powder coated & confirming to IS specification incuding removing the existing unserviceable one and making good the distrubed surface to match with the existing surface complete all as directed and as directed.
S&F MCCBs TPN 100A 16 KA 415V AC 3 phase 50Hz with thermally adjustability of 80 to 90% confirming to IS specification made out of CRCA sheet housing duly powder coated & confirming to IS specificaiton including removing the existing unserviceable one and making good the distrubed surface to match with the existing surface, complete all as directed and as directed.
M & L Submain wiring with 2 runs of single core 4 sqmm PVC insulated FRLS multistranded 1100 volts grade wire, copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not not less than 25mm dia including one run of single core 4 sqmm PVC insulated sheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain riwing complete all as specified and as directed.
All as per Sl item No 178, but 2 runs of single core 6 sqmm and one run of single core 6 sqmm as earth continuty conductor Note for item No 178 & 179 : Two runs of cable and one run of earth wire and one run of PVC conduit will be measured as one unit.
All as per Sl item No 178, but 2 runs of single core 4 sqmm and one run of single core 4 sqmm as earth continuty conductor through existing conduit, complete all as directed and as directed.
All as per Sl item No 178, but 2 runs of single core 6 sqmm and one run of single core 6 sqmm as earth continuty conductor through existing conduit, complete all as directed and as directed. Note for item No 193 & 194 : Two runs of cable and one run of earth wire in existing conduit will be measured as one unit.
M & L Submain wiring with 4 runs of single core 6 sqmm PVC insulated FRLS multistranded 1100 volts grade wire, copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not not less than 25mm dia including one run of single core 6 sqmm PVC insulated sheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain riwing complete all as specified and as directed.
M & L Submain wiring with 4 runs of single core 10 sqmm PVC insulated FRLS multistranded 1100 volts grade wire, copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not not less than 25mm dia including one run of single core 10 sqmm PVC insulated sheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain wiring complete all as specified and as directed. Note foru runs of cable one run of earth wire in existing conduit will be measured as one unit.
M & L for removing repairing any kind of LED building security light of any wattage by replacing the defective parts,complete replacement of all LED chips,correction of LED circuits by soldering etc to make it functional and refixing it complete all as directed and as directed.
Supply and replace starter 40/36/20 Watts, 230 V complete all as directed and as directed.
Supply and replace Bi pin holder suitable for 40 / 28 Watts tubes (pin & screw type) complete all as directed and as directed.
Supply and replace split pins / lock pins for ceiling fans complete all as directed and as directed.
Supply and replace MS Clamp with rubber bushes, bolts & nuts for ceiling fan alongwith lock pin complete all as directed and as directed.
Supply and replace PVC Dummy sheets circular type of 4" complete all as directed and as directed.
Supply and replace PVC Dummy sheets circular type of 6" complete all as directed and as directed.
M & L Rewinding of burnt ceiling fan of 1200 mm/ 1400mm sweep motor with supper enameled copper wire of suitable size including repainting it white , fixing of new sealed bearing, capacitor, rubber bushes, canopy, fan clamps and shaft of any make, type model incl transportation complete all as directed and as directed.
Supply and replace Fan condenser 2.5 mfd, complete all as directed and as directed.
S&F ceiling fan downrod of 15 mm dia of required height including drilling of holes and threads for the same as per the site requirement complete all as directed and as directed.
Supply and replace PVC rectangular box (Gang box) with 5 Amps switch socket, complete all as directed and as directed.
Supply and replace PVC rectangular box (Gang box) with 5/15 Amps switch socket, complete all as directed and as directed.
Supply and fix/ lay GI pipe 15 mm dia med grade for protection of earth continuity conductor complete all as directed and as directed.
Supply and replace Plug top 5 Amps 3 pin 250 Volts, complete all as directed and as directed.
Supply and replace Plug top 15 Amps 3 pin 250 Volts, complete all as directed and as directed.
S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified.
Supply and replace PVC wire of Flexible cord with copper conductor multistanded of twin core 23/0.198sqmm complete all as directed and as directed.
M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60 cm x 6mm thick burried directly in gound to a depth not less than 2.25m below ground level with top edge of earth plate not less than 1.5m below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts, nut, check nuts and washers etc of galvanised iron and earth lead protected by provision of GI pipe 15 mm bore of medium grade from earth electrode to DBs / Main switch all as shown in Electrical Plate No 3 of SSR Part I and connectged to main switch board including excavation and earth work in any type of soil, PCC chamber in 1:2:4 Type B-1 using 20mm graded stone aggregate 75 mm thick RCC cover in 1:2:4 type B-1 reinforced with 6mm dia bars at 75mm c/c both ways with 12mm dia MS bar handle complete all as specified and directed
Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawnin conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4mm dia galvanised iron or steel wire complete all as directed and as directed.
Supply and fix white hylam plain laminate sheet of 3mm thick with cadmium plated screw, cup washer etc complete all as directed and as directed.
Checking and attending day to day complaints by mean of finding of fault repairing / rectifying the problem / faults related water supply complaints GI/CI/DI/PPR pipe line leakage any type and size and all accessories and fixtures maintained by MES under GE (U) Secunderabad including tight, repair . rectification of existing the loose connections complete all as specified and directed. Note:- 1. This item only covers cost of labour for attending complaint and taking down old materials. 2. Item required to be replaced under this item have to be measured and paid separately as supply only items. 3. Complaint noted for no water shall be attending immediately without fail. failing which recovery rate Rs-250/- per complaint per day shall be effected from the contract. 4. Minor items such has screws, nuts, bolts any size as per requirement shall be deemed in the Quoted rates. 5. The contractor will be allotted complaints at MES complaint cell on daily basis at 9:00 am on all working days includiing Sundays and holidays and sufficient tradesmen / T&P incl necessary from work and Scaffolding, safety measures resources will be deployed by him/her for completion of day to day complaints within 8 hours from the time of reporting. Any delay beyond above mentioned time limit without intimation of genuine cause, penalties will be recovered @250/- per complaint for each un-attended complaint. 6. A Detailed log book of complaints with completion / non-completion remarks from unser / MES will be maintained by the contractor and the same will be updated on daily basis in consultation with JE E&M / Engr-in-Charge. 7. The contractor will make suitable arrangement for emergency complaints and will notify authorised representive / Engr-in-Charge about extraordinary circumstances for probable non-completion or delay in rectification of complaints beyond stated time limit set for disposal of complaint. In case of any dispute the decision of accepting officer will be final and binding in this regard. 8. Labour charges for this item shall be excluded from items which includes M&L, S&F, S&F in repair, Fixing only, FIxing repair etc in respective items of this shcedule / BOO
All as per item No 204 above but for GI/PP-R pipe line of size 15mm dia to 20 mm bore.
All as per item No 204 above but for GI/PP-R pipe line of size 25 mm dia to 50 mm bore.
Taking up or down GI/PVC/PP-R water tubing and connections including cleaning the pipes free from scaling for reusing the same in repairs / alteration or removable to store etc to water pipes and connections complete all as specified and directed for the following sizes:-
20 mm bore.
25 mm bore.
40 mm bore.
50 mm bore.
Re-laying /refixing or rerouting of GI/PVC/PP-R old water tubing and connection in new or old position including fittings with old/new bends, elbows, socket nipples, tapers, and reducers etc as per site requirement (floors, walls and ceilings) complete all as specified and directed.
20 mm bore.
25 mm bore.
40 mm bore.
50 mm bore.
Supply, lay and fixing steel water tubes, medium grade, galvanised with all fitting laid in trenches/walls as in repairs complete all as specified and directed for following bore of pipes :-
20 mm bore.
25 mm bore.
40 mm bore.
50 mm bore.
Supply and fix gun metal gate valve, ISI marked connected with iron wheel head, screwed at both ends for iron pipes and fixed including taking down of unserviceable gate valve complete all as specified and directed for the following sizes:-
20 mm bore.
25 mm bore.
40 mm bore.
50 mm bore.
M&L cutting of road / hard standing up to a sxe not exc 60 cm in width and 60 cm depth for laying of water pipe line complete all as specified and as directed.
Supply and laying GI tubing light grade of size 50 mm for cable protection on road/drain/floor/pole including necessary clamps 40x4mm. Make : TATA/Jindal/Bansal with ISI marked.
Excavation in trenches not exc 1.5m wide and not exc 1.5m depth for laying of pipe lines, valve chambers, man holes etc including forming bottom surface to required level and gradient and getting out in hard /dense soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick in soils complete all as specified and directed.
Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Spreading riddled earth ( after preparation of excavated earth) in Cable duct with sand cushioning of cable laid in trenches complete all as directed by Engineer-in-Charge Note:- Punned thickness 18 CM( 6.25 Cm below cale and 11.75 cm above cable) will be measured for payment purpose. Quoted rate inclusive of all arrangement as mentioned.
Supply and Laying bricks, common burnt clay building bricks, sub class 'B' of size 230 x 115 x 75 mm laid across in trenches for cable protection complete all as specified and directed.
Supply and lay in trenches/fixed to walls/poles etc connecting buy using lugs, testing and commissioning XLPE insulated and PVC sheathed heavy duty LT 1100 Volts grade armoured under ground cable with stranded aluminium conductor 4 Core 10 Sqmm complete all, as specified and directed Make : Havells/Finolex/POLYCAB/GLOSTER Note :- Earth work excavation, sand cushioning and brick protection shall be measured and paid separately.
All as per item no:215 above but 4 Core 16 Sqmm
All as per item no:215 above but 4.0 Core 25 Sqmm
All as per item no:215 above but 3.5 Core 35 Sqmm
All as per item no:215 above but 3.5 Core 50 Sqmm
All as per item no:215 above but 3.5 Core 70 Sqmm
Restreching/Restringing, tightening and repair to overhead line ACSR conductor of any size on LT poles including necessary Aluminium binding wire connectors PVC sleeves for jumper, fixing of insulators and prunning of tree complete all as specified and directed. Notes: (i) The distance between pole to pole in one span (contains 2/4/6 runs) i.e one span will only be considered for payment purpose. (ii) No Extra conductor will be measured for binding to insulators / jumpering etc.
Supply, lay, commissioning and testing of cable jointing Kit Heat shrinkable type for 1100 V grade cable for straight through joint with jointing material and accessories suitable for LTUG cable of size 16 to 50 Sqmm, 3.5 Core complete all as specified and directed.
All as per item No 217 above but suitable for aluminium conductor cable of size from 70 sqmm, 3.5 Core to 95 Sqmm, 3.5 Core
M&L for ACSR conductor, steel reinforced for LT over head lines on poles including streching tightining of poles insulator with binding wire of suitable size with insulator/streching of ACSR conductor including disconnecting/taking out old existing unsv ACSR conductors complete all as specified and directed.
M&L for Pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 100 mm height, 65 mm dia for 1100 volts grade, including disconnecting/taking out old existing unsv insulators complete all as specified and directed.
M&L for Shackle type, Porcelain, vitreous, white, brown or green insulator including galvanised mild steel straps, washers, insulator bolts, washers and nuts of size 100 mm height, 115 mm dia for 1100 Volt grade, section of straps 31x5 mm, including disconnecting/taking out old existing unsv insulators complete all as specified and directed.
S&F Stay assembly comprising of 7/10 SWG galvanised MS stranded stay wire of required length, minimum tensile strength 70 Kg/mm (grade-2 quality) fixed to pole with and including FI clamps, bolts, nuts, washers, galvanised steel stay rod 16mm dia 180 cm long bow 400 x 14 mm nuts/bolts, washers, loop type insulator of size 65 x 90 mm vitreous, clearance dia of hole 16mm, stay plate of size 230 x 230 x 6 mm including necessary excavation and earth work PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate in foundation and disposal of surplus soil, upto 50m including disconnecting/taking out old existing unsv stay assembly complete all as specified and directed.
M/L for cross arms, bracing, supports clamps and back plates fabricated from structural steel section incl nuts, bolts washers, welding, bending cold or hot drilling holes for bolts in any shapes or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint including disconnecting/taking out old existing unsv cross arms complete all as specified and directed.
M&L for painting the existing LT steel poles of 9.0 Mtr long including cross arms, clamps, street light junction boxes etc with 1 coats of aluminium paint including throughly cleaning the existing surface, writing of pole numbers in yellow circle 15 cm with black paint on poles. Painting the poles up to 1.5 Mtr height with alternate bands 30 cm height (3 Nos black and 2 Nos Yellow) from ground level, complete all as specified and directed.
Advance Maintenance Free G.I. SAFE EARTHING Electrode with PIPE of not less than 50 mm outer dia( THICKNESS NOT LESS THAN -2.5MM) and two meter length, The electrode should be of galvinised (80 -100 micron) along with earth lead as Galvanised steel strip of size 32 X6 mm 7.5 m . The GI Electrode shall be pre-filled with Cristaline Conductive Material (CCM) . The GI electrode shall be surrounded with 25 kg BackFill compound to provide maximum contact between the electrode and Back Fill Compound. .The earting pit should be cover with pcc(1:2:4 , B1) cover ,of 450 x 450 mm complete all as specified and directed make ASHLOK / INDELEC/JMV /TERCEL/True Power.
Trimming/pruning and removing of tree branches or any other foreign objects from HT/LT over head conductor and clearing the OH Line of any type and size for one span of any length in 2 way /4 way/6 way conductor system. Notes: (i) Insulators of any type, connectors and ACSR conductor of any size required at site will be measured and paid separately under relevant item of this schedule. (ii) The contractor is responsible for provision of Necessary T & P and safety equipments to complete the job.
Cutting unaxious green growth and grass by manual labour or by machine at all 11 KV Electric Installation premisses/around 2/4 Pole structure/along the boundary fencing and removing rubbish from the site of work complete all as specified and directed.
Supply and fixing steel light bracket made out of 40 mm bore mild steel GI light grade tubing over all length 1.5 mtr bend to shape as directed including providing two Nos MS flat iron 40x6 mm clamp of appropriate size with nut bolts and washer duly painted with two coat of synthetic enamel paint over a coat of primer (GI surface shall not be painted) complete all as specified.
S&F PVC insulated unsheathed/sheathed cable with stranded Aluminium conductor 1100 Volts grade, flat twin core service cable of size 4 Sqmm conforming to IS:694/1990 with latest amendments ISI including disconnecting/taking out existing unsv/damaged old service cable complete all as specified and directed. Make : Richa/havells or equivalent.
S&F LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete, lighting source and lens embedded PC cover having TOP OPENING separate driver compartment with IP66 protection and impact resistance of IK07 with 10 KV Built-in-Surge Protection Device, road way light fitting with high power LED as light source of capacity 90 watts with suitable drivers etc and connecting with 1.5 Sqmm copper conductor PVC insulated three core weather proof cable etc, fixing to wall/pole, complete all as specified and directed. Note : (i) Contractor has to produce LM-79/LM-80 certificate alongwith purchase vouchers. (ii) Surge protection of the drive should be 10 KV
S&F LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp die-cast aluminium IP66 flood light, suitable for highlighting architectural facade and general purpose lighting, with high power LED as light source of capacity 120 watts with suitable drivers etc and connecting with 4.0 Sqmm aluminium conductor PVC insulated twin core weather proof cable etc, fixing to wall/pole complete all as specified and directed. Note : (i) Contractor has to produce LM-79/LM-80 certificate alonwith purchase vouchers and Guarantee certificate from Manufacturer. (ii) Surge protection of the driver should be 10 KV
Supply & Replace MCCB along with both side spreader link and nut bolts of appropriate size (Conforms to IEC:60947-II/IS:13947-II) in exisitng LT Panel box/Feeder Pillar boxes (KIOSK),in MCCB DBs of capacity 160 Amps, 4 Pole, 35 KA, 415 Volt including disconnecting/taking out existing old unsv/burned MCCB complete all as specified and directed. Make : Havells/L&T/Legrand/ABB
All as per item No 234 here in before but of capacity 100 Amps, 4 pole, 16 KA
Supply and fill new transformer oil for top up, of low viscosity of approved make as per IS 355 of 1992 and di-electric strength 60KV all as specified and directed .
M & L for filtration and dehydration of existing transformer oil by means of centrifugal machine electrically operated at site different locations of transformer in running condition including testing of oil samples both before and after dehydratation and filteration. The dielectric strength of the transformer oil shall not be less than 60 KVA with 2 mm gap after dehydration all as specified
M & L for Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrinkable type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm complete all as specified .
Himagiri Constructions
ATUL ENTERPRISES
SRI BHAVANI ENTERPRISES
BEEGEE DESIGN SYSTEMS
M/S RADHIKA ENTERPRISES
K LAKSHMAN SINGH AND CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .