REPAIR/REPLACEMENT/IMPROVEMENT OF OLD WORNOUT SUB MAIN WIRING FITTINGS DBS/EARTHING WITH NECESSARY CONNECTED ACCESSORIES FOR MD ACCN WITH NEAR MISC AREA UNDER AGE E/M AT GE BENGDUBI MIL STN

Amount

SCHEDULE 'A'

Taking down carefully copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants , regulators, sockets light fitting etc for taking credit removing from site and making good disturbed surface of walls, floors etc as per existing specification complete all as specified and directed.

Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators etc for reuse at site complete all as specified and directed. (Note : To be measured only when found serviceable in all respects complete for reuse)

M&L for concealed point wiring with FRLS PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 1.5 sqmm size alongwith one earth continuity conductor with FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 1.5 sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mm x 300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good to disturbed surface for the following: -

One light point or one fan point/ calling bell point controlled by one switch

One 3 pin socket outlet, 5 Amp independent

One 3 pin socket outlet, 5 Amp on the same board with other switches

M&L for concealed point wiring with FRLS PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 2.5 sqmm size alongwith one earth continuity conductor with FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 2.5 sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of one 15 Amp switches-sockets outlet independent complete all as specified and directed.

M&L for point wiring with FRLS PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 1.5 sqmm size alongwith one earth continuity conductor with FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 1.5 sqmm size through and including PVC casing & caping (double lock) of suitable size with all necessary fittings, terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of switches, sockets, fan regulators etc for the following: -

One light point controlled by 2-way switch

One light point or one fan point or bell point controlled by one switch

One 3 pin socket outlet, 5 Amp independent

One 3 pin socket outlet, 5 Amp on the same board with other switches

M&L for point wiring with FRLS PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 2.5 sqmm size alongwith one earth continuity conductor with FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 2.5 sqmm size through and including PVC casing & caping (double lock) of suitable size with all necessary fittings, terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mm x 300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of one 15 Amp switches-sockets outlet independent complete all as specified and directed.

S&F Switch piano, flush button, 5/6 Amps, single pole, two way, 230 Volts complete all as specified and directed.

S&F Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed.

Fixing only Switch piano any type (as retrived against item No 2.00 here-in-before) complete all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin, 5 Amp complete all as specified and directed.

Fixing only Socket outlet 5 Amp any type(as retrived against item No 2.00 here-in-before) complete all as specified and directed.

S&F Switch socket combination 2 in 1, 5 Amp flush type complete all as specified and directed.

Fixing only Switch socket combination 2 in 1, 5 Amp flush type (as retrived against item No 2.00 here-in-before) complete all as specified and directed.

S&F Switch socket combination 5A/ 16A, 5 in 1 flush type complete all as specified and directed.

Fixing only Switch socket combination 5A/ 16A, 5 in 1 flush type (as retrived against item No 2.00 here-in-before) complete all as specified and directed.

S&F Bell push, flush type, 5 amp complete all as specified and directed.

Fixing only Bell push (as retrived against item No 2.00 here-in-before) complete all as specified and directed.

S&F Bell, AC, 230 Volts, single pole complete all as specified and directed.

S&F Ceiling rose, 3 way PVC insulated body complete all as specified and directed.

Fixing only Ceiling rose any type (as retrived against item Ser No 2.00 here-in-before)

S&F stepped socket type electronic fan regulator flush type (2-Module) complete all as specified and directed.

S&F stepped switch type electronic fan regulator flush type (2-Module) complete all as specified and directed.

S&F LED Tube Light luminaries with high performance LED with driver 1 x 18W (4 Feet long, Cool day/Warm white) complete all as specified and directed . Make Havells cat part no. LUMILINEBS18WLED865SPWH OR EQUIVALENT MODEL OF CG /Philips.

S&F LED Tube Light luminaries with high performance LED with driver 1 x 9W (2 Feet long, Cool day/Warm white) complete all as specified and directed .make:Havells CAT PART NO.LUMILINEBS9WLED865SPCWH or equivalent model of Philips/CG

S&F Decorative CITY 1 wall light fixture made up of Polycarbonate suitable for 9 W LED lamp (B22) includin 10W LED Bulb etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexiblecopper conductor cable with suitable size.(Make:- Havells model no.LHDL02160099 OR equivalent model of philips/CG.

S&F CFL light fitting,1x10W LED bulk head luminaries IP65, complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V,50HZ. make:Havells cat part no.RUGBYGENX10W or equivalent model of Philips/CG

S & F Building security LED light luminaire fitting 1X20 W and including cable for connection from celling rose with 1.5 Sqmm PVC insulated stranded copper conductor (FRLS) cable including 25 mm GI bracket medium grade 1m long bent to shape including bolt, nut,washer,clam made out of MS flat of size 25X3 mm , 4 nos Anchor Bolt of suitable size etc all as specified and as directed by the Engineer-in-charge . MAKE Havells cat part no. VILUMINA 20W or equivalent model of Philips/CG.

S&F Lamp holder , PVC / Polycarbonate type with back plate suitable for B22 lamp including 9 Watt LED Bulb complete all as specified and directed. Make: Havells, Model: PHHD015 or equivalent model of Philips / Bajaj /Surya

S&F 12W LED Round/Square surface mounted downlighter including suitable driver & all accessories to fixed on Ceiling/Wall all as specified & directed by Engr-in-Charge.make:Havells cat part GLOW DL REC RD 12W or Eqivalent model of Philips/CG

S&F 12W LED Round/Square recessed mounted downlighter including suitable driver, cutting of False ceiling as required and all accessories for fixing arrangement all as specified & directed by Engr-in-Charge.make:Havells cat part GLOW DL SUR RD 12W or Equivalent model of Philips/CG

S&F 36W LED Square Type 2' x2' recessed mounted downlighter including suitable driver, cutting of False ceiling as required and all accessories for fixing arrangement all as specified & directed by Engr-in-Charge.Make:crompton cat part no.LCTLRN-36-FO-CDL or Equivalent model ofPhilips/havells.

S&F 36W LED Square Type 2' x2' surface mounted downlighter including suitable driver, cutting of False ceiling as required and all accessories for fixing arrangement all as specified & directed by Engr-in-Charge.make:Havells cat part no.PLANO SURFACE 2 X2 36W or Equivalent model of Philips/CG.

Fixing only serviceable light fitting any type (as retrived against item No 2.00 here-in-before) complete all as specified and directed.

Taking down of Old MCB DB / control box any type any size including MCBs and separating the serviceable MCB DBs and MCBs for reuse at site complete all as specified and directed.

S & F sheet metal enclosure for MCB, DBs, Vertical type, double door, phosphatised, Powder coated , Triple Pole and Neutral (TPN), fixed flush to wall , IP 30 and IK 08 Protection Grade, including adjustable type MCCB as incoming of capacity 100Amp,4 pole with breaking capacity 25kA, 4 way, Double door 415 Volts all as specified and as directed .Make:LEGRAND cat part no.IP54- 507753 or equivalent model of Havells/L&T/ABB.

S & F Sheet metal enclosure for MCB DB double door Triple pole & Neutral 4 way with common bus bar at incomming end. Make:Legrand/havells/L&T/ABB.

S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 12 way with common bus bar at incomming end Make:Legrand/havells/L&T/ABB.

S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 8 way with common bus bar at incomming end.Make:Legrand/havells/L&T/ABB.

S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 4 way with common bus bar at incomming end.Make:Legrand/havells/L&T/ABB.

S & F Sheet metal enclosure for MCB DB Single door single pole & Neutral 2 way without busbar.Make:Legrand/havells/L&T/ABB.

Refixing of MCB DB any type complete all as specified and directed.

S&F MCB Four pole, 415 volts, 40-63 Amps, breaking capacity 10KA complete all as specified and directed. Make:- Legrand L&T/ C&S/ Indoasian

S&F MCB 'C' series Double pole 6 to 32 Amps, breaking capacity 10KA, complete all as specified and directed. Make: Legrand /L&T/ C&S/ Indoasian

S&F MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed. Make: Legrand /L&T/ C&S/ Indoasian

Refixing of MCBs any size any type complete all as specified and directed.

Taking down of old Submain wiring upto 10 sqmm any type including batten/ conduit/ casing at any indicated situation complete all as specified and directed.

M&L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm as earth continuity conductor drawn through PVC Conduit complete all as specified and directed. Note :- (a) PVC Conduit / casing- caping shall be included in same rate. (b) For concealed sub-main wiring cutting chases will be measured & paid separately. (c) All the incomming and outgoing cable should be connected throgh proper lugs & sockets as per site requirement)

M&L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through PVC Conduit complete all as specified and directed. Note :- (a) PVC Conduit / casing- caping shall be included in same rate. (b) For concealed sub-main wiring cutting chases will be measured & paid separately. (c) All the incomming and outgoing cable should be connected throgh proper lugs & sockets as per site requirement)

M&L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through PVC conduit complete all as specified and directed. Note :- (a) PVC Conduit / casing- caping shall be included in same rate. (b) For concealed sub-main wiring cutting chases will be measured & paid separately. (c) All the incomming and outgoing cable should be connected throgh proper lugs & sockets as per site requirement)

M&L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 1.5sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 1.5sqmm as earth continuity conductor drawn through PVC conduit complete all as specified and directed. Note :- (a) PVC Conduit / casing- caping shall be included in same rate. (b) For concealed sub-main wiring cutting chases will be measured & paid separately. (c) All the incomming and outgoing cable should be connected throgh proper lugs & sockets as per site requirement)

S&F in replacement Modular Switch 1 way 6 A, 1 module complete all as specified and directed.

S&F in replacement Modular Switch 1 way 16 A, 1 module complete all as specified and directed.

S&F in replacement Modular Socket 6 A, 2/3 pin combined 2 module complete all as specified and directed.

S&F in replacement Modular Socket 6 A/ 16 A, 2/3 pin combined 2 module complete all as specified and directed.

S&F in replacement Modular Regulator Step Type 120 watt, 2 module complete all as specified and directed.

S&F in replacement Modular Blank plate, 1 module complete all as specified and directed.

S&F in replacement Modular type White cover plate with frame 2 module complete all as specified and directed.

S&F in replacement Modular type White cover plate with frame 3 module complete all as specified and directed.

S&F in replacement Modular type White cover plate with frame 4 module complete all as specified and directed.

S&F in replacement Modular type White cover plate with frame 6 module complete all as specified and directed.

S&F in replacement Modular type Metal Flush box 2 module complete all as specified and directed.

S&F in replacement Modular type Metal Flush box 3 module complete all as specified and directed.

S&F in replacement Modular type Metal Flush box 4 module complete all as specified and directed.

S&F in replacement Modular type Metal Flush box 6 module complete all as specified and directed.

S&F in replacement LED bedside light fitting with 180O swivel and in-built on-off switch as directed.Make:philips cat part no. 48042 3W or equivalent model of havells/CG.

S&F surface and wall mounted LED batten 20W with integrated electronic driver (4 Feet long) complete all as specified and directed . Make:havells CAT PART NO. LUMILINEBS20WLED865SPCWH or equivalent model of philips/CG.

S&F surface and wall mounted LED batten 10W with integrated electronic driver (2 Feet long) complete all as specified and directed . Make:havells cat part no. LUMILINEPLUSBS10WLED865SPCSS or equivalent model of philips/CG.

S&F wall security LED light luminaire fitting 1X25 W and including cable for connection from celling rose with 1.5 Sqmm PVC insulated stranded copper conductor (FRLS) cable including 25 mm GI bracket medium grade 1m long bent to shape including bolt, nut,washer,clam made out of MS flat of size 25X3 mm , 4 nos Anchor Bolt of suitable size etc all as specified and as directed. (Make:havells cat part no. VILUMINASL25LED757SASYBOPC or equivalent model of philips/CG.)

S&F LED down lighter with aluminium housing recess mounted round / squre type 15 watt complete all as directed. Make:havells cat part no.EDGEPRORDDLR15WLED840S or equivalent model of philips/CG.

S&F LED down lighter with aluminium housing surface mounted round / squre type 15 watt complete all as directed. Make Havells cat part no ENDURANEOHESURFACE15W or equivalent model of philips/Havells/Crompton.

S&F 50W LED Flood Light including suitable driver, nut, botls, washer, bracket & clamps (made out of MS angle of size 0.5 meter) etc all as specified & directed. Make:havells cat part no. JETA QUANTO PLUS 50W/philips/CG.

S&F LED post top light 30/40 Watt as suitable including all accessories as specified and as directed. make:havells cat part no.RUBYPT25WLED830SSYMTOPC or equivalent model of philips/CG.

S&F LED SPOT light with spike 15 watt CDL/Warm White adjustable type all as specified and as directed.make:PHILIPS 31386 12W COB spike or equivalent model of Havells/CG.

S&F recess mounted LED wall washers ,tilted 70 degree outward and swivels 360 degree to offers best illumination on the wall and retail displays including LED driver. Make HAVELLS cat part no SPARKEPROSNOOTDLR30W830MOD38DWHTNEEM or equivalent model of philips/CG.

S&F suspended architectural LED luminaire provides soft light and glare free symmetrical illumination with continous mounting end cap. make HAVELLS cat part no CONSTA1144LP40WLED830SPCWH or equivalent model of phiips/CG.

S&F surface and wall mounted LED batten 22W with integrated electronic driver (4 Feet long) complete all as specified and directed. Make:havells cat part no LUMILINEPLUSBS22WLED865SPCSS or equivalent model of /philips/CG.

Taking down fan, sealing cable end, dismantling blades and removing fan & blades, painting (white) with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust, marking same MES No. with permanent Marker etc and hanging the ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

S&F in replacement MS Box in concealed of any type and any size complete all as specified and directed.

S&F in replacement PVC hylum sheet 3mm thik top cover of size 300 x 250 x 3 mm complete all as specified and directed.

S&F in replacement PVC hylum sheet 3mm thik top cover of size 250 x 150 x 3 mm complete all as specified and directed.

S&F in replacement PVC hylum sheet 3mm thik top cover of size 100 x 100 x 3 mm complete all as specified and directed.

S&F in replacement PVC ractangular block for mounting switch/socket/MCB DB's with 3 mm thick plastic laminated sheet cover of size 250 x 200 x 50 mm deep.

S&F in replacement PVC ractangular block for mounting switch/socket/MCB DB's with 3 mm thick plastic laminated sheet cover of size 200 x 150 x 50 mm deep.

S & F in replacement PVC ractangular block for mounting switch/socket/MCB DB's with 3 mm thick plastic laminated sheet cover of size 175 x 100 x 50 mm deep.

S&F in replacement flexible wire 2 core copper size 1.5 sqmm complete all as specified and directed.

S&F in replacement Capacitor 2.5 Mfd 220 volts complete all as specified and directed.

S&F in replacement Single Pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 16/25Amp complete all as specified and directed.

Cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and directed.

Cutting opening in cement concrete walls (any description) including trimming surfaces for fixing of MCB DBs or Main Switches or Exhaust Fans or at any other indicated situation complete all as specified and directed.

M&L for Providing cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) for fixing of 50 mm bore GI pipe between walls or MCB DB complete all as specified and directed.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for cable trenches and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft / loose soil complete all as specified and directed.

Removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.

M&L sand cushioning (dry) in trenches for protection of UG cables (below, above and around the cable laid in trenches) of 230mm spreding thickness and consolidated (punned) upto 180mm thickness complete all as specified and as directed.

Material and labour well burnt old size sub Class ‘B’ bricks, laid flat, in trenches for cable protection complete all as specified and directed.

M&L for 40 mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/ poles/ under road/ floor etc for cable protection, complete all as specified and directed.

Taking out Old un-serviceable / faulty cable of any size from trench / pole complete all as specified and directed.

M & L for XLPE insulated GI wire/Strip armoured Electric power cable (Heavy duty) with stranded Aluminium conductor 1100 Volts grade, cross sectional area 25 Sqmm 3.5 core laid in trench/pole/on wall completer all as specified and directed. Make:polycab/finolex/Havells.

M & L for XLPE insulated GI wire/Strip armoured Electric power cable (Heavy duty) with stranded Aluminium conductor 1100 Volts grade, cross sectional area 16 Sqmm 2 core laid in trench/pole/on wall completer all as specified and directed. Make:polycab/finolex/Havells.

S & F 1100 Volts grade heavy duty cable PVC insulated Aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connection twin core 10 Sqmm cable flate or Circular complete all as specified and diercted. Make:polycab/finolex/Havells/plaza

Taking down of wiring/Submain wiring upto size three phase 10.0 sqmm and refixing the same through new/ existing casing-caping or conduit for distribution of balanced elect load at any indicated situation including taking down Old fan and deposting to MES store yard complete all as specified and diercted. Note: PVC casing-capping or PVC conduit shall be measured and paid under separate item here in-after

Supply only the following items for incorporated to the items No. 128.

(a) PVC Casing-Caping of size 25mm.

(b) PVC Conduit of size 20mm.

(c) PVC Conduit of size 25mm.

Advance Maintenance Free G.I. SAFE EARTHING Electrode with PIPE of not less than 50 mm outer dia (THICKNESS NOT LESS THAN -2.5MM) and two meter length, The electrode should be of galvinised (80 -100 micron) along with earth lead as Galvanised steel strip of size 32 X6 mm 7.5 m . The GI Electrode shall be pre-filled with Cristaline Conductive Material (CCM) . The GI electrode shall be surrounded with 25 kg Back Fill compound to provide maximum contact between the electrode and Back Fill Compound. Backfill compound should be eco-frendly and having RoHs certification. GI Electrode Shall be tested from CPRI. The earting pit should be cover with PCC (1:2:4 Type B1) cover of size 450mm x 450 mm complete including excavation eartwork etc all as specified and directed make ASHLOK / INDELEC / JMV / TERCEL.

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 87,240.00 (refer Tender Srl Page No 41). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

GOUTAM KUMAR GHOSH

PRADIP KUMAR BOSE

SHRI S K BHATTACHARJEE

UNIVERSAL CONSTRUCTION

SRI A B SEN

MUKHERJEE ENTERPRISE

Prahalad Rai