Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.9 CrAccepted-AOC H NO 74 E STREET NO 11 JAWAHAR NAGAR HISAR HARYANA INDIA PIN NO 125001 | HISAR | HARYANA | 125001 | ₹3.9 Cr Quoted ₹4.6 Cr | L1 | Accepted-AOC Lowest Rates |
| 2 | L2₹4.7 Cr+₹14.2 L (3.13%)Rejected-Finance | ₹4.7 Cr+₹14.2 L (3.13%) | L2 | Rejected-Finance Higher Rates |
| 3 | Not Admitted-Fee/PreQual/Technical 6 SWASTIK VIHAR PHASE 1 SECTOR 5 MANSA DEVI COMPLEX PANCHKULA HARYANA 134114 | PANCHKULA | HARYANA | 134114 | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| 4 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹3.3 Cr
EMD Value
₹6.6 L
Closing Date
30 Dec 2019, 11:00 amClosed
Ashok Kumar
Room No. 30 Mini Secretariat New Building Panchkula
Renovation of Haryana Panchayat Bhawan Sector 28 Chandigarh
2019_HRY_112583_1
XEN (PR) 21
Open Tender
Civil Works
Works
365 days
Panchkula
Please refer Tender documents.
2 documents required · 2 mandatory
₹5,000
Yes
XEN Panchayati Raj
₹6.6 L
Yes
22 Mar 2021
13 Dec 2019
30 Dec 2019
13 Dec 2019
30 Dec 2019
13 Dec 2019
13 Dec 2019 - 25 Dec 2019
Amount
Lifting of Malba from site and throwing by tractor trolley at other place
Supply of Vitrified tiles flooring (600x600x10mm) of approved make i.e (make:JOHNSON,Kajaria, Nitco,simpolo) double charged
Providing & applying Plaster of Paris suspended false ceiling up to any height above floor level, including fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive). Consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts. Other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size. The other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre.
Supply of curtains Size 7' x 3' as approved by Engineer-in-charge.
Providing &fixing curtain road i/c brackets screwes etc.
European WC: Star white crystal CATO MAKE or equivalent wall hung EWC with soft close seat cover 540mmx360mmx355mm CATEGORY NO S-10431108 wall hung Pattern with C.I. Chairs or brackets crystal type with C.P. brass hinges rubber buffers,angle valve jet etc. concelaed tape water cistern complete in all respect i/c Jet, Angle Valves CATEGORY NO - F1005201/ F-1014201 & conceald Valves
Wash Basins: Supply and Fixing of Counter Wash Basins with including ALL plumbing connections,cost to include drain out from the WB to the Main hole and should be connected to the Main drain line,cost also to include all related water inlet arrangments like piller cock, angle,valves , granite shelf etc required for the WB.cost should be inclusive of removing the existing basins and clearing the durbis from site.Complete in all respect. Washbasin CERA CAMRY OR EQUIVALENT CATEGORY NO- S-2020105 Pillar cock CERA OR EQUIVALENT Single Lever Gayle Quater Turn CATEGORY NO F-1014102, Angle Wall CATEGORY NO F-1014201 (to the satisfaction of Officer In Charge
Wash Basins: Supply and Fixing of Counter Wash Basins with including ALL plumbing connections,cost to include drain out from the WB to the Main hole and should be connected to the Main drain line,cost also to include all related water inlet arrangments like piller cock, angle,valves , granite shelf etc required for the WB.cost should be inclusive of removing the existing basins and clearing the durbis from site.Complete in all respect. Washbasin CERA CANCHA OR EQUIVALENT 400mmx400mm CATEGORY NO- S-2020140 (to the satisfaction of Officer In Charge
Urinals: Supply and Fixing of Sensor Wall mounted urinals CERA / HINDUSTAN / PARRYWARE complete in all respect.
Suply of 15mm dia GI pipe of approved make i.e jindal B Class OR EQUIVALENT .
Suply of 20mm dia GI pipe of approved make i.e jindal B Class OR EQUIVALENT.
Suply of 25mm dia GI pipe of approved make i.e jindal B Class OR EQUIVALENT.
Suply of 40mm dia GI pipe of approved make i.e jindal B Class OR EQUIVALENT.
P&F of 35 mm thick flush doors with 4 mm thick Teak ply on both sides
Door closer 2 No
Door Lock 1 No
Latch 1 No.
Paneling around column & jamps in 4 mm thick teak ply 12 mm comm. ply
P&F window size (16’x10’) with hollock or salwood chokat 5’x 2½” (8 cft. Wood ) 12 mm toughed glass reflective film-
P&F designer wall paneling & LCD paneling in 19 mm thick comm. board cladded with 4mm thick teak ply over 4 mm thick comm. ply & 1mm lamination
Skirting in lamination wooden profile make Pergo/ Action Tesa
Diverter : Supply and Fixing of Twoway free flow diverter of Jaquar/aqualor equivalent make,cost to include required plumbing / fixing etc.No additional plumbong cost will be paid.CERA CATEGORY NO F-4030101 + SPOUT F-1005661
Basin Mixer - Supply and Fixing of Twoway free flow Basin mixer of Jaquar/aqualor equivalent make,cost to include required plumbing / fixing etc.No additional plumbong cost will be paid. CERA CATEGORY NO F-1005471
False ceiling is 4 mm thick teak ply over 12mm thick commercial ply fixed one G.I. channels
Providing & fixing zebra blinds (vista)
Partly Glazed Full Height Partition Providing and fixing in position partly glazed Full Height Partition work including door in frame work at 2’ x 2 ‘ grid (horizontally and vertically) comprising of 2” x 1½” Solwood. Section and / or as per frame work shown in the drawings with 6mm plywood on both sides finished with 1 mm thick laminates of approved shade and colour as shown in drawings. Item to include 12 mm thick glass with etching and frosting as per design and 2”x 2” solwood member for door sides and glass sides and beachwood door frame to take 8 mm thick glass with etching and frosting. All exposed beachwood. surfaces to be finished in melamine polish of matching laminate colour as directed including all necessary Stainless Steel finish fittings/ hardware, door closers, Godrej locks and wood preservative paint etc. as per list of approved material and as approved by the Project Consultant/ Bank complete in all respects
Providing and fixing wooden panelling &3" thick wooden betten of 12mm thick commerical ply board with 4mm thick teak ply with natural PV matt finish Polish.
Planters: Providing and placing in position Ceramic pots. This would include Artificial Plants to be provided as per the size of the pot . The Plants to be strictly as approved by the Engineer-in-charge
Sitting Area: All made with Plywood frame, 4",3" and 1" thick king foam, White Lining and Finished with leatherite all inclusive.as per the instructions of Design Incharge
Artificial Tree Sculptureas approved by the Engineer-in-charge
Partition:- Providing & fixing the wooden partition with 19mm commerical ply board finish with 4mm thick teak ply complete in all respect.(height of partition:-4'-0")
Deceuninck / Fenesta make of DCM SRIRAM Ltd. UPVC window (size 3'-3" x 4'-9") with double glass unit (8mm thick 16mm Gasquet Rubber for profile 8mm thick) outer frame will be made by deceuninck white with plain toughened glass including installtion cost with fastner, PU, silicon & labour.
Wall Paneling: Provinding and fixing Panelling over the existing wall made out of 2"x1" partal framing @ 2' -0" c/c bothways covered with 19 mm th. Ply of approved make and 1/2" thick foam finished with fabric of approved make as per the drg. & instruction.
Wooden Caldding: Providing and fixing wooden panelling in the area indicated in the drawings. All exposed wooden surfaces shall be finished with Melamine polish Rate shall include fixing the whole panel in the space earmarked for the same as per drawing and as per the direction of architect.
Providing and fixing of wallpaper on the bed back. As per approval of officer incharge
LCD UNIT as per drawings
Supply of PVC pipe 3" x 4 Kg presure
Supply of PVC pipe 4" x 4 Kg presure
Supply of G.I. Union UNIK, UCO 15mm
Supply of G.I. Union UNIK, UCO 20mm
Supply of G.I. Union UNIK, UCO 25mm
Supply of G.I. Union UNIK, UCO 40mm
Applying texture on walls as per design
Proving & Fixing curtains for all existing windows with two way sheer and black out curtains in rooms
Providing and fixing in position 15mm i/d C.P brass bib cocks of best quality as per approved of officer in charge CERA MAKE OR EQUIVALENT CATEGORY NO F-1014151
Providing and fixing in position 15mm i/d C.P brass bib cocks long body of best quality CERA MAKE OR EQUIVALENT CATEGORY NO F-2004152
PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE SHOWER WITH 15 OR 20 I/D IN-LET. Mixed colour 175 mm diameter Jaguar 8" Square complete with arms CERA B Class OR EQUIVALENT CATEGORY NO F-7010502
Poviding and applying of P.U. Polish on doors and windows. Making the surface of doors and windows smooth and gaining its natural shine.
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
Extra for providing & fixing 8 mm thick toughened glass in steel railing inclusive of the cost of epoxy, steel nut bolts etc. in all respects entire the satisfaction of engineer in-charge
Supply of Granite stone in all shades,15mm to 18mm thick in flooring, laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of granite stone. (excluding the cost of granite stone
Providing and fixing False ceiling Size 450x450mm best quality aluminium make tiles of aprooved make on M.S.Steel runners frame i/c cost of screws angles, cleats, rawel plugs, with taping and paintings etc. complete in all respects as aproved by Engineer-in-charge
Providing Edge Molding to 18 mm thick granite stone counter vanities etc. including machine polishing to edge to give high gloss finish etc. complete (As approved by the Engineer in-charge)
Urinal Partition JAQUAR MAKE St. 450mm (Category No. JSE-CHR-810US450X) (As approved by the Engineer in-charge)
S/E of 36 watt LED recess pannel light fitting (Philips) make including making necessary connetions
S/E of 18/20 watt LED batten light fitting (Philips) make including making necessary connetions
S/E of 12 watt LED down lighter fitting (Philips) make including making necessary connetions
S/E of 100 watt LED flood light fitting (Philips) make including making necessary connetions
S/E of 1200 mm sweep ceiling fan (Orient / Bajaj/ Crompton/ Khaitan) including all patty material required to complete the job in all respect
S/E of 400 mm sweep wall fan (Orient / Bajaj/ Crompton/ Khaitan) including all patty material required to complete the job in all respect
S/E of 300 mm sweep exhaust fan (Orient / Bajaj/ Crompton/ Khaitan) including all patty material required to complete the job in all respect
S/E of 1.5 ton split AC Daikin including cost of M.S. stand , Stablizer,and 9 ft copper pipe
S/E of 2 ton split AC Daikin including cost of M.S. stand , Stablizer,and 9 ft copper pipe
S/E of water hetar (Geyser) 25 ltr. Including all patty material required to complete the job. Make: Havells /Crompton/ Bajaj
S/E of 20 Watt LED Fancy light Make: Philips, Model- Track light Including all patty material required to complete the job.
Outdoor Unit - 24 HP
Supply, Installation, testing and commissioning of Cassette Type Indoor units equipped withl, pre-filter, fan section with suitable static fan, multispeed motor, coil section with DX coil, outer cabinet, drain pan, drain pump, insulation, pipe connections, variable evaporative temperature control etc. of various capacities as per specifications and drawings, All indoor Units should have force shut option to connect with fire alarm or key card adaptor, so that the unit automatically stops in case of fire or key card removal.
Cassette Type Indoor Unit - 1.5 TR
Cassette Type Indoor Unit - 2.0 TR
Cassette Type Indoor Unit - 3.0TR
Cassette Type Indoor Unit - 4.0TR
Cassette Type Indoor Unit - 4.5 TR
Supply, Installation, testing and commissioning of Sensiflow Cassette Type Indoor units equipped with, pre-filter, fan section with suitable static fan, multispeed motor, coil section with DX coil, outer cabinet, drain pan, drain pump, & Occupancy sensor and Floor temperature sensor, insulation, pipe connections, variable evaporative temperature control etc. of various capacities as per specifications and drawings. All indoor Units should have force shut option to connect with fire alarm or key card adaptor, so that the unit automatically stops in case of fire or key card removal.
Cassette Type Indoor Unit ( Sensiflow type) - 3.0 TR
Supply, Installation, testing and commissioning of Ductable Type Indoor units equipped withl, pre-filter, fan section with suitable static fan, multispeed motor, coil section with DX coil, outer cabinet, drain pan, insulation, pipe connections, variable evaporative temperature control etc. of various capacities as per specifications and drawings.
Ductable Type Indoor Unit - 3.0 TR
Supply and installation of Refrigerant Piping Y-Joints or Headers as required to connect the above outdoor units and indoor units. ( liquid and gas line as one set)
Supply installation testing and commissioning of Corded remote
SITC of PVC (Minimum 15 Kg/Sqcm pressure rated) Drain Water Piping complete with fittings (elbows, tees, reducers, sockets etc.), supports, jointing and any other item required to make the system complete. Nominal Diameters of Pipes in mm as indicated below:
25 mm ( with 9 mm Class- O XLPE)
32 mm ( with 9 mm Class- O XLPE)
40 mm ( with 9 mm Class- O XLPE)
50 mm ( with 9 mm Class- O XLPE)
SITC of Copper Refrigerant piping for VRV / VRF System complete with fittings, supports, jointing, insulation with class O -XLPE , gas charging & commissioning as per specifications, all accessories as per specifications and any other item required to make the system complete. Nominal Dia in mm OD as indicated below :
34.9 ( with 19 mm insulation )
28.6 ( with 19 mm insulation )
25.4 (with 19 mm insulation)
22.2 ( with 19 mm insulation )
19.1 ( with 13 mm insulation )
15.9 (with 13 mm insulation)
12.7 ( with 13 mm insulation )
9.5 ( with 13 mm insulation )
6.4 (with 13 mm insulation)
Providing & fixing control cum transmission wiring of 2 core x 1.5 sqmm copper in suitable conduits between indoor units and outdoor units and indoor units and remote controllers.
Supply, Fabrication, Installation and Testing of sheet metal ducts complete with vanes, splitter dampers, hanging arrangement including check nuts in accordance with the approved shop drawings and specifications.
Supply, Installation , Testing of 125mm deep antivibration flexible joints at the outlet of ducable units/inline fans. Flexible connections shall be constructed using imported fire retardant fabric with extruded aluminium frame/flange on both sides.
Supply air grilles with damper
Return air grilles without damper
Supply and Application of internal acoustic lining of supply air ducting using open cell nitrile rubber insulation with density within 140-180 Kg/m3 as per the approved shop drawings and specifications. Insulation material shall be bonded with the ducts using metal screw and washers to facilitate grip to the GI sheet.
10mm thick lining
Supply and Application of external thermal insulation of supply /return air ducting using nitrile rubber insulation with proper adhesive as per the specifications and drawings.
13mm thick insulation
Supply, installation, testing and commissioning of weather proof MV panel board with canopy,of cubical type, compartmentalized design fabricated from 2mm thick CRCA sheet having necessary cable alleys, powder coated through seven-tank process facility for pricking and degreasing, including connections and interconnections as per specifications complete with following accessories as required:
25 A TPN RCBO- 6 Nos.
Supply, laying, testing and commissioning of following sizes of cables for Indoor Cassette Units
3C x 2.5 Sq. mm Copper Conductor (PVC insulated, PVC sheathed flexible wire)
Supply, laying, testing and commissioning of Power cabling XLPE insulated, PVC sheathed, armoured, copper conductor of 1.1 KV grade on cable trays.
4C x 10 Sqmm Copper
4C x 6 Sqmm Copper
Supplying and making cable end termination complete with brass compression gland, crimping thimbles for PVC sheathed aluminium /copper conductor cable of 1.1 KV grade of the under noted sizes as required.
4C x 10 Sqmm Copper
4C x 6 Sqmm Copper
Supply and fixing of perforated of indicated thick CRCA GI perforated cable tray painted of required colour, of following sizes complete with bends/tee joints, coupling plate & nuts bolts etc. including Supporting structure as per specification complete as required.
150mm wide & 50mm deep x 1.6mm thickness
300mm wide & 62.5mm deep x 2mm thickness
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
S/E of 10 KVA UPS Single phase with 12V 42 ah battery , rack and interlinking set including all patty material required to complete the job in all respect up to entire satisfaction of engineer incharge of the work.
Supply of fully digital wired Flush Mount Chairman unit , unit should be a fully integrated Chairman panel equipped, should have clear button for deactivate all the microphone headphone connector and headphone volume control, that included gooseneck microphone should be free from interference caused by mobile phones. It should combine several functionalities in one single panel. Gooseneck microphone with GSM immunity and LED ring , ,Microphone on/off button , RJ 45 or D9 or 6 Pole connector connectors for separate loop through cabling, Microphone length should not be less than 450 mm,3.5 mm jack socket for headphone, microphone should be programmed to track the camera during video conferencing etc. as reqd. Make Bosch
Supply of fully digital wired delegate unit , unit should be a fully integrated delegate panel equipped , headphone connector and headphone volume control, that included gooseneck microphone should be free from interference caused by mobile phones. It should combine several functionalities in one single panel. Gooseneck microphone with GSM immunity and LED ring , ,Microphone on/off button , RJ 45 or D9 or 6 Pole connector connectors for separate loop through cabling, Microphone length should not be less than 450 mm,3.5 mm jack socket for headphone, microphone should be programmed to track the camera during video conferencing etc. as reqd. Make Bosch
S/I/T/C of 4 core Shielded twisted pair cable with Solid copper conductor of 24 AWG of Bandwidth 450 MHz or better, SF - UTP Cable Construction, pair-to-pair skew 10-30 ns per 100 meters. (2 Mtrs).
S/I/T/C of 4 core Shielded twisted pair cable with Solid copper conductor of 24 AWG of Bandwidth 450 MHz or better, SF - UTP Cable Construction, pair-to-pair skew 10-30 ns per 100 meters. (20 Mtrs).
Supply of digital Central control unit should have the following features, the central unit for powering, configuring and Controlling connected Chairman, Delegate units, and option to control up to 50 units . The system should have in built digital processing and control/ transmission of the Digital audio signals. It should have basic management facilities with at least 4 open microphones should have recording facility SD/USB/External. Make Bosch
Supply of Ceiling mount Speaker of of wattage 16 watts or better, frequency Range 40 Hz - 20 kHz, Transformer Taps 70 V/100 V or 8 ohm impedence. Make Bosch
Supply of Ceiling mount SoundField In-Ceiling Subwoofer 10" (254 mm) low frequency driver with a tuned port, UL 2043 plenum rated, Frequency range: 25 Hz to 160 Hz, 400 watts continuous pink noise, 800 watts continuous program, 8 ohm operation, Suspension mounting above the ceiling structure greatly reducesMake Bosch
Supply of Two-channel Power Amplifier having Sensitivity 1.4V, Rated Power Output (per channel) 1000W 2Ω, 800W 4Ω, 475W 8Ω, Signal to Noise Ratio (below rated 1 kHz power at 8 ohms) 100 dB (A-weighted), THD < 0.5%, Frequency Response (at 1W, 20 Hz - 20 kHz) + 0 dB, -1 dB, Crosstalk (below rated power) 20 Hz to 1 kHz >70 dB, IEC Power Connector 15A, Peakx Plus™ Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning, 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application, Locking power cord clip provides a secure connection between the amplifier and power cord, Updated HiQnet System Architect™ control software, Increased number of presets to a total of 50; 49 of which are user definable Make Extron/AMX/ATEN
SITC of Display: 86" Professional Commercial Display of Operation 24 x 7 with full HD 1920X1080 resolution With 350 Brightness, Cvonnectivity: HDMI (2), DVI-D, RGB, Audio in, USB 2.0, RS232C (IN/OUT), RJ45, IR Receiver. Approved Makes Samsung, LG, Sharp
SITC of Display: 55" Professional Commercial Display of Operation 24 x 7 with full HD 1920X1080 resolution With 350 Brightness, Cvonnectivity: HDMI (2), DVI-D, RGB, Audio in, USB 2.0, RS232C (IN/OUT), RJ45, IR Receiver. Approved Makes Samsung, Sony, Sharp
SITC of HDMI HDBaseT Extender with 1 x HDMI Type A Female input 1xHDMI output type A Female, max distance over twisted pair cable up to 150mtr @full HD 1920x1080P, Video speed 10.2Gbps (3.4Gbps per lane) HDCP Compatible.
SITC of HDMI, VGA, Audio, HDBaseT Extender: POE with 1 x HDMI Type A Female input , max distance over twisted pair cable up to 150mtr @full HD 1920x1080P, ideo speed 10.2Gbps (3.4Gbps per lane) HDCP Compatible, Complete in all respect as per engineer-in-charge.
SITC of HDMI, VGA, Audio, HDBaseT Extender: POE with 1 x HDMI Type A Female input , max distance over twisted pair cable up to 150mtr @full HD 1920x1080P, Video speed 10.2Gbps (3.4Gbps per lane) HDCP Compatible.
SITC of Audio De-embidder ,HDMI to HDMI,DVI to HDMI<Audio Return Channel (ARC),HDMI 1.4 (3D, Deep Color, 4K); HDCP 1.4 compliant,Superior video quality,HDMI: up to 4K (3840 x 2160 @30Hz),DVI: up to 1920 x 1200,HDMI audio stream can be extracted and converts it to S/PDIF, Coaxial, or a RCA Stereo Audio signal, LED indication of power status.
SITC of 4K Switcher Connects any of 8 HDMI sources to any of 8 HDMI displays, ,Supports 4K resolutions up to UHD (3840 x 2160) and DCI (4096 x 2160) with refresh rates of 30 Hz (4:4:4) and 60 Hz (4:2:0), Signaling rates up to 3.4 Gbits for flawless 4K output, Multiple Control Methods – system management via front-panel, pushbuttons, IR remote, RS-232 control, and Ethernet connections (Web GUI).
SITC of HDMI Cable:(19pin) Male to Male 0.6mtr with gold coating palt coating, Cable shield type, Aluminum Foil.
SITC of HDMI Cable: (19pin) Male to Male 2mtr with gold coating palt coating, Cable shield type, Aluminum Foil.
SITC of VGA moulded cable 2.0 mtr cable with 15 pin with 3.5mm audio connector to carru audio along with videomtr.
SITC of PVC pipe "Heavy" ISI marked for wiring purpose i/c PVC bends, hooks, inspection boxes etc. with all other material required to complete the job. ii) 25 mmdia on surface
SITC of Control Processor: Onboard 512 MB RAM & 4GB Flash memory,Expandable storage up to 1TB,XPanel with Smart Graphics™ computer and web based control, iPhone, iPad,and Android control app support,One RS-232/422/485 COM port, Two RS-232 COM ports, Eight IR/serial, eight relay, and eight Versiport I/O ports,IPv4,IPv6 ready, Front panel USB computer console port.
SITC of Ipad: 2 GB RAM | 32 GB ROM,24.64 cm (9.7 inch) Quad HD Display,8 MP Primary Camera | 1.2 MP Front,iOS Lattest,Battery: Lithium - Polymer, Processor: A8X Chip with M8 Motion Co-processor.
SITC of Floor Mount Equipment rack of suitable size along with required Trays to place equipments, Lock and Key Operation, Open from Three Sides, PDU 5A 10 No and 15 A 10 Nos, Fan Tray for Cooling of Placed Equipments.
SITC of dual compartment low profile steel raceway of Size 100 x 40 mm along with accessories to provide a seamless and aesthetically pleasing interface for voice, data, audio, and video applications at the point of use along with their accessories. Approved Make : Legrand, MK
Supply of Wireless Presentation & Collaboration for meeting environment, 1024–bit Encryption, 1080p 60fps video Streaming Playback, IOS and Android Mirroring of Approved Makes : Key Digital
SITC of PVC unsheathed copper conductor single core 1100 V grade in existing pipe of suitable size excluding cost of pipe
i) 1.5sqmm
S/I/T/C of 4 core Shielded twisted pair cable with Solid copper conductor of 24 AWG of Bandwidth 450 MHz or better, SF - UTP Cable Construction, pair-to-pair skew 10-30 ns per 100 meters. Approved Makes : Extron/AMX/Creston
Supply, Installation, Testing and Commissioning of Full HD Visual Communciation System having 12x Optical zoom cameras with 1920x1080p 60 frames per econd, Configured for 1 +3 Locations, Video Codec Should Support H.261 , H.263, H263+, H.263++ ,H.264 High Profile, H.264 Baseline, Should have video Ability to send and receive two live simultaneous video sources in a single call, so that the image from the main camera and PC or document camera can be seen simultaneously, Video Output Should have at least 2 nos. of HDMI / or equivalent ( High Definition Multimedia Interface) output to connect Full High Definition display devices such as plasma and projectors for both Video and Content, Should have at least 2 HD video Input to connect full HD cameras, Should have at least one additional video Input to connect auxiliary full HD camera, Should have VGA/DVI/HDMI port to connect PC/ Laptop directly to the Video conferencing system and display resolutions upto 1080p, (Dual Monitor Support)Should support 3 monitors for Self View, Remote View and Content all in separate Monitors, Codec should have inbuilt recording feature,Should have Audio features Automatic Gain control, Acoustic Echo Canceller, Should support 2 Microphone inputs, pick up range should be 10 feet from the microphone, The Complete Unit Consist of Codec, Camera, Boundary Microphone of 3m radius and Multipoint Licence. Approved Make : Panasonic KX- VC 1300 SX/Polycom Group 700/Cisco SX 20
Supply of Professional electrically retractable 21,5" widescreen FULL HD monitor to be integrated into furniture. Powder painted steel housing and up-table cover plate in brushed stainless steel. DVI-I and DVI- D HDCP compliant inputs. Lift system with electrical engine activated through push buttons integrated in the cover plate and AHnet protocol (RS422) through CAT5 cable with loop-through, individual addressing and termination switch. Make Albiral ALB22HDMR/Element One/ or Equivalent.
BULLET CAMERA Image sensor 1/3"4 MP Prograssive scan effective pixel 2590 (H) x1520(V) Min Illumination 0.08 lux or better/ F2.2 in colour mode or better and 0 lux in night mode, min IR light 15 mtr or above, focal length fixed 2.8mm / 3.6mm, video compresion H265power ingress protection IP66,PoE, true WDR 120db, certification UL/BIS/CE/ FCC make (Panasonic/ Honeywell/ Dlink)
DOME CAMERA (Vendal proof) Image sensor 1/3"4 MP Prograssive scan effective pixel 2590 (H) x1520(V) Min Illumination 0.08 lux or better/ F2.2 in colour mode or better and 0 lux in night mode, min IR light 15 mtr or above, focal length fixed 2.8mm / 3.6mm, video compresion H265power ingress protection IP66,PoE, true WDR 120db, certification UL/BIS/CE/ FCC make (Panasonic/ Honeywell/ Dlink)
NETWORK VIDEO Recorder/HD IP camera input up 16 cameras, main processor dual core embededprocessorlinex , video output HDMI, 1 VGA, video compression h.264/h.265,recording throughput=160mbps or better, storage 2 sata ports sport 8TB each internal, max user access 128 user, two way talk 1 chhanel input and 1 chhanel out put, certification UL/BIS/CE/ FCC make (Panasonic/ Honeywell/ Dlink)
Commercial LED TV screen size 32 inch, 1 port audio input, digital clean view, 1 HDMI port, make Samsung/ LG/ Panasonic
On line UPS of 1KVA capicity, 220/230 AC Single phase operating voltage 110-300 AC load dependent, 50/60 hz operating frequency , 220/230 output voltage, 3 no 12V 7AH battery battery backup 12 min on full load, transfer time inverter to bypass 4 min, low battery alaram, DC hhigh, overload alaram, short circuti and fault condition alaram. make APC/ BPE/ Liebert
Supply, Installation, Testing and comissioning of Layer -2 switch 24-port Gigabit managed switch with 4 SFP combo Port.Switch should support Web based authentication provides network admission control through web browser to any host devices and operating systems. The features (DHCP Snooping, IP Source Guard, and Dynamic ARP Inspection) above work together to prevent DOS attacks in the network, thereby increasing network availability. PVE (also known as protected ports) provides Layer 2 isolation between devices in the same VLAN, supports multiple uplinks. The ability to lock Source MAC addresses to ports, and limits the number of learned MAC addresses. Support for up to 512 rules.switch should support 50K session on application protocol.switch should have throughput f 56.6 Gbps data forward rate.OEM should have leader/chellenger quadrant Gartner report for network. Make Cisco/Juniper/Alcatel
SITC of 24-port 19" 1 U jack panel which Should Be made of sheet steel 1.5 mm, Should be 19" 1U straight Patch Panel, 24-port, Should have integral cable management Metal shelf,Should accept Shielded as well as Unshielded jacks which should be toolless termination. Should have rear cable management shelf metallic powder coated.OEM should have 25 year performance warranty on their items. Make: (R&M/Systimax/Seimon/Belden)
SITC of 1 Mtr UTP Cat6 cable which Should be Compliant with Cat.6 requirements of ISO/IEC 11801, EN 50173, EN 50168 and EIA/TIA 568.C.2, Should be stranded bare copper, Should be unshielded.OEM should have 25 year performance warranty on their items.Product should be certified by GL.Make:(R&M/Systimax/Seimon/Beldon)
SITC of 2 Mtr UTP Cat6 cable which Should be Compliant with Cat.6 requirements of ISO/IEC 11801, EN 50173, EN 50168 and EIA/TIA 568.C.2, Should be stranded bare copper, Should be unshielded..Product should be certified by GL.Make:(R&M/Systimax/Seimon/Beldon)
SITC of UTP Cat 6 UTP Cable, Transmission frequency of 250 MHz (Minimum),cable Should be 4 pair and Cable should be jacket FR PVC Lbp 69% required with certified..Product should be certified by GL.(R&M/Systimax/Seimon/Beldon)
SITC for Square plate, 86mmx86mm with dimension, Write on labels in transparent plastic window – supplied with plate, face plate should be of ABS Plastic material.Make: (R&M/Systimax/Seimon/Beldon)
SITC for Information Cat6 Information outlet which should be tool less support and having mating cycle of 950 or more I/O should be certified in channel by ETL/3P/GHMT and certificate to be available on certified agency..Product should be certified by GL.Make: (R&M/Systimax/Seimon/Beldon)
Supply of 1 KVA UPS with 30 min backup which have Power factor correction,Inbuilt Overvoltage cut-off device (OVCD),Support for up to 160 AH external battery cabinets, Generator Compatible with Wide Input. Wide Input Voltage window (110 – 280Vac) for IndianEnvironmental Condition andfor Optimized BatteryPerformance. UPS would support SNMP Mnagaer and web browser. Make: APC/Emerson/Leibert
27U and 9U rack Specifications:
Rack should have 27U with dimension of 500X600 MM with 2 steel frameworks consisting of 4 vertical and 4 horizontal,sections bolted together with side panels integrated on either sides.4 Recess mounting angles.2 pairs of support channels with wide distance of 600 MM and same will be depth.Top Cover made up of CRCA sheet +powder coated.• Bottom cover made up of CRCA sheet +powder coated.Salt spray test according to ISO 9227 (NSS test) and IEC EN 60068-2-11,Floor Standing cabinets can be equipped with earthing strip.PDU have DP for power cut and suport to Full Load Current - 6 to 32Amp for 6 socket -1nos Make: Netrack/APC/Valrack
Rack should have 9U which has 2 vertical sections and 2 horizontal sections forms a steel front framework.The top and bottom cover comprises of round cutouts of one 50mm and three 38mm diameter with cable entry points edge protected with rubber grommets. The top cover also has cutout for fan fitments.The whole cabinet is mounted on the wall with the support of 4 wall mounting brackets, 2 on left hand side and 2 on right hand side. PDU have DP for power cut and suport to Full Load Current - 6 to 32Amp for 6 socket -1 nos Make: Netrack/APC/Valrack
SITC for UTM Firewall shall support upto 120 nodes/user. Firewall should not have user limitation or licensing device should have octeon cavium processor to have faster performance.UTM have full DPI throughput of 400 mbps with 4 security cores. UTM have specialized inspection for protocols like HTTP,FTP,DNS, SNMP, ICMP, NFS, H.323,SIP, RTSP and many more.Device should have support on VPN remote access clients on Apple iOS, Google Android, AmazonKindle, Windows, MacOS and Linux platforms, for fast, secure mobile access.Device have Deep packet inspection on all traffic – without restrictions on file size or protocol, including encrypted SSL connections. Device should have 3 year subscription with 24X7 support.
Bidder Name
Amount
kartarsinghcontractor
C.K. Infrastructures Ltd.
C.K. Infrastructures Ltd.
C.K. Infrastructures Ltd.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .