PROJECT- PROVDING AND FIXING FOR FURNITURE IN INTERIOR FIT-OUT FOR OFFICE BUILDING OF MCK ,BASE 11-16,SECTOR-12, KARNAL,HARYANA

Amount

Senior Officer's Table ( Superinteding Engineer, DTP, Executive Engineers,Senior Accounts Officer etc)(T2) : Providing & placing valid Greenguard certified executive table . The size of the table should be 2350 mm W x 1150 0 mm D x 750 mm H. Primary Work Surface should be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Soft closing access flap with in-build power box are provided on work surface for wire management .Secondary Work Surface should be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.Modesty Panel should be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Under structure should be made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top .Pedestal construction sould have BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security. The OEM Should be havig valid ISO 9001:2015, ISO-14001:2015 , ISO 50001:2018 , ISO 45001:2018, OHSAS- 18001:2007 certificates, BIFMA membership since past 10 years. .

Senior Officer's Side Table(Superintending Engineer, , DTP, Executive Engineers,Senior Accounts Officer etc (ST2)) : Providing & placing valid Greenguard certified executive table. The size of Extended Return unit shall be 1200 W x 500 D x 750 H. Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top..The OEM Should be havig valid ISO 9001:2015, ISO-14001:2015 , ISO 50001:2018 , ISO 45001:2018, OHSAS- 18001:2007 certificates, BIFMA membership since past 10 years.

Officer's Table (Zonal taxation officer , Accounts officers, Assistant Engineers etc T3 -): Providing & placing valid Greenguard certified executive table .The size of the table should be 2100 mm W x 1050 mm D x 750 mm H. Primary Work Surface should be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Soft closing access flap with in-build power box are provided on work surface for wire management .Secondary Work Surface should be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.Modesty Panel should be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Under structure should be made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top .Pedestal construction sould have BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security. The OEM Should be havig valid ISO 9001:2015, ISO-14001:2015 , ISO 50001:2018 , ISO 45001:2018, OHSAS- 18001:2007 certificates, BIFMA membership since past 10 years.

Officer's Side Table (Zonal taxation officer , Accounts officers, Assistant Engineers etc (ST3)): Providing & placing valid Greenguard certified executive table. The size of Extended Return unit shall be 1200 W x 500 D x 750 H. Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top..The OEM Should be havig valid ISO 9001:2015, ISO-14001:2015 , ISO 50001:2018 , ISO 45001:2018, OHSAS- 18001:2007 certificates, BIFMA membership since past 10 years.

Providing & placing of Low Height STorage cabinet Body : Body is made from 18mm PLB with all the edges sealed with 0.8 mm thick PVC Edgeband. The Back panel is 9mm White PLT. The entire construction is ready to assemble unit and is assembled with suitable KD fittings. The shelves and separator panels ( if available ) is made from 18 mm white PLT and edges are sealed with 0.8 mm edge band. The bottom shelf is fixed and other shelves have one step adjustment for optim izing the space. Doors : Door Panels ae made from 18 mm PLB with 2 mm Edge band on all edges ad a flush Plastic handle is fitted vertically at the center of the door. The hinge door has suitable hinges and HDU is fitted with an adjustable fitting for height adjustment. The SDU runs in a PVC track mounted on the TOP and Bottom panel of the Body. HDU has a three point lock and SDU has a push type lock. All the storages are fitted with a 6 mm leveler at bottom for leveling. The OEM Should be havig valid ISO 9001:2015, ISO-14001:2015 , ISO 50001:2018 , ISO 45001:2018, OHSAS- 18001:2007 certificates, BIFMA membership since past 10 years.

Storage (Full height cabinet) Providing and Placing of Greenguard Certified Full Heiight storage Dimensions of 457mm(D)x1980mm(H) width 915mm (W).The Construction shall be rigid knock down made out of 0.8 thick CRCA steel conforming to IS : 513 . Each body shall have a main unit plus add on units (1,2,3,4,5) . Finish shall be Epoxy polyester powder coated thickness of 40 microns . Shelf construction shall be made from CRCA steel 0.8 mm thick IS :513 .Uniformly distributed load capacity of 80 Kg . Undercarriage shall have construction in welded frame made of HR sheet 3.15 mm thick conforming to IS : 10748 . Finish shall be epoxy polyester powder coat of approved color & shade with a dry film thickness of minimum 40 microns .The Movements shall be Drive Type configuration : In case of D2 & D3 movement of units is achieved mechanically through a PU Drive Wheel and Sprocket -Chain-Tensioner arrangement mounted rigidly onto body size .For D2 each movable undercarriage shall be provided with 2 rollers on the shaft for driving , 2 antifriction ball bearing for rolling and 4 antifriction ball bearing for guiding between rail . Fittings shall be centralized locking arrangement through locking stiffener mounted onto back of single last unit so that it gets locked on channels when all the units are brought together . The Recess handle lock is of Godrej make & placed at suitable height . This arrangement occupies a space of 90.0 mm . When the last unit is twin movable , hinged doors are provided for the end bodies, so in this case locking stiffener is mounted onto drive unit cover ; and with tile fascia option , it will be mounted in the recess of vertical trim . Each Drive Type units shall have Locking Knob near the drive wheel for manual locking of individual units when a person is using those units . Knob shall be rotated to unlock position when units are to be moved . End stoppers shall be provided to prevent derailment . Door locking shall be having hinged doors of recessed die cast handle cum lock giving 3 way locking through a lever & shooting bolts . Guide channels shall have 'J' section 2 mm thick HR & 25 mm Square bright bar . Easteners shall be galvanized/blackodized/Zn plated .The label holder shall be made from 2 mm thick clear transparent acrylic sheet . Also total no. of loading levels per understructure shall be 10 for SD2. Fascia(tiling) 3 tile pattern fascia option on drive side panel plus 3 tile pattern fascia on non-drive side panel plus 3 tile pattern fascia option on back panel of single last plus 3 tile pattern fascia option on back panel of single static . The tiles are held together by stiffeners & fasteners in 2 vertical metal trims. The OEM Should be having valid Greenguard IAQ Gold, GRIHA & SVAGRIHA, Green Pro, ISO 9001:2015, ISO-14001:2015 , OHSAS- 18001:2007 certificates. BIFMA membership since past 10 years.

Storage (Over head cabinet) Providing & placing overhead units . The overall Dimensions of overhead storage unit is shall be 900 mm W x 328 mm D x 785 mm H . The Construction shall be aesthetically appealing completely knock down construction made from 0.6 mm thk. CRCA as per IS - 513 . Horizontal stiffener shall be made from 1.2 mm thk. CRCA as per IS - 513 . The doors shall be made from 18 mm thk. interior grade pre-laminated board as per IS - 12823 or 18 mm thk . Plain particle board as per IS -3087 with 0.6 thk. with 0.6 mm thk. decorative laminate and 0.6 mm thk. backing laminate as per IS - 2046 on either side . All edges shall be duly sealed with 2 mm thk. PVC edge banding . Two door with single lock on RH door . Locking shall be 10 lever cam lock lever at the bottom of the door .Shelving shall be Heightwise adjustable shelf 1 no. Uniformly distributed load capacity of 25 Kg UDL .The finish shall be Epoxy powder coated to the thickness of 50 microns . The doors shall be 448 mm W x 18 mm Thickness x 783 mm H RH side door with lock. 448 mm W x 18 mm D x 783 mm H LH side door w/o lock . The doors shall be made from 18 mm thk. interior grade pre-laminated board as per IS - 12823 or 18 mm thk . Plain particle board as per IS -3087 with 0.6 thk. with 0.6 mm thk. decorative laminate and 0.6 mm thk. backing laminate as per IS - 2046 on either side . All edges shall be duly sealed with 2 mm thk. PVC edge banding . It shall have two door with single lock on RH door . The OEM Should be havig valid ISO 9001:2015, ISO-14001:2015 , ISO 50001:2018 , ISO 45001:2018, OHSAS- 18001:2007 certificates, BIFMA membership since past 10 years.

CHAIRS: Providing & placing visitor chair IDM (India Design Mark) certified & tested as per ANSI/BIFMA x5.1:2017 standards chair for strength, durability & safety and M7.1:2011 for low VoC emissions. The seat and back shall be made up of 1.2+/-0.1cm thick hot pressed plywood and Upholstered with fabric and moulded polyurethane foam all around. The moulded polyurethane foam shall be of density 55+/-5 kg/m ³, and hardness load 15-20 kgf as per IS:7888 for 25% compression. The dimensions of seat shall be- 49.0cm(W) x 44.0cm(D) and of back shall be 50.0cm(W) x 47 cm(H).The armrests should be integrated with the understructure. The cantilever understructure made up of Dia 25.4mm, 2mm thk ERW tube and finished with Black Powder coat. Overall dimensions of Chair shall be, Width of Chair - 55cm, Depth of Chair - 55 cm as measured from base below. Height 92 cm. Seat height -45 cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA x5.1 standards. The OEM Should be having valid BIFMA membership since past 10 years. Staff Chair (600 x 600) (C2)

Peon- 02 (450 x 450) (P1) Providing & placing Multipurpose chair with arms. Its simplicity should be maximized by sleek structure without visible holes or screws. Understructure should be powder coated upto 50-60 micron per DFT and made of round MS tubes. Rear legs Dia 25.4mm with 2mm thick and L-shape Front legs of dia 25.4mm with 1.2mm thick, all together will be welded with support of welding fixture and glided should be there. Seat and Back should be made of Polypropylene material with Hot Runner Mould Technology. Back will have metal insert and Spring washer bracket for fixing with understructure frame. Seat will be fixed to understructure by using bumper stacks and screws. Seat should have cushion upholstered fabric and arms for ergonomic seating. Overall Size: Seat Height from floor = 455mm, Seat Depth = 459mm, Seat Width = 445mm, Total Chair Height = 811mm and overall Chair width = 512mm & Depth = 553mm. The OEM Should be having valid BIFMA membership since past 10 years .

Waiting Chair (WT1) - 3 seater Providing Providing & placing 3 seater public seating chair with end sides armrest where seat, back, arms & legs shall be silver powder coated made of cold rolled steel with 1.2 ± 0.01 cm thickness. Cross beam shall be 1.2 mm thk silver powder-coated perforated shell made from cold rolled M.S. sheet 2mm thickness. The Side Bar shall be made of powder-coated solid steel with inserts. The Shell shall be assembled on the Cross Beam with help of bolts . Seat width- 54.5 cm per seat. Thickness of side bars is 4.5cm & gap between seats is 2cm. Overall Dimensions shall be Seat Height - 40.6 cm, Height - 77.5cm, Width & Depth of Chair as measured from ground - Width-176.5 cm and Depth-71 cm.Dimensions tolerance / variations shall be within +/- 1 cm. plastic end caps should be fitted to legs. the leg assembly should be powder coated ( dft 40-60 microns). The OEM Should be having valid BIFMA membership since past 10 years.

Providing and placing canteen table Tabletop:Table top is made of 25mm thk .MDF OSR .OSRboard(Bottom side in white-collar) asperIS: 12406 which is having two finish options. Option I:PUcoated on top side with the colour options as per colour chart. Option II: Membrane on top side with the colour options as per colour chart. Under structure -Legs are made by welding the combination of M.S.E.R W. round tube 63.5x2mmTHK of IS: 7138, flanges made of CRCA sheet. Of 1.6mm THKand 1.2mm thk)of IS513.inside plates made of HR 5mm THK sheet (IS:2062).Assembly in epoxy polyester powder coated(Min40micron). Table Top folds upside at offset centre pivot provide on support bracket which is Aluminium alloy (ADC12) pressure die cast coated with epoxy polyester powder coated (min 40 micron) Table top connected with spring loaded mechanism with full handle made of sandwich tubes of M.S.E.R.W. 16*1.2mm THK. And 12.7*1.6mm THK.tube of IS7138.coated with epoxy polyester powder coated(Min40micron). To operate table top. Legs are provided with casters of 65mm lockable type for Ease of movement and can be locked when required at any positions.

1-Seater Sofa (S1) 1 str-Overall Size :Width : 101cm Depth : 83cmHeight : 86.5cm Seating Height : 46cm. Seat :· Understructure: Understructure is made up of combination of plywood & pinewood members. Plywood is 12±1mm thk. [moisture resistance & termite proof as per IS:303] & pinewood are of cross sections 22x64mm, 34x64mm & 16x35mm without having major knots & defects on the surface. Zigzag spring of dia. 3.8mm is mounted on the seat structure using plastic spring mounting clip for support & additional cushioning purpose. Non woven fabric is stapled on the seat structure frame above the spring asly. to avoid direct contact between the metal springs and the seat foam. This prevents seat foam from tearing. Powder coated MS support pipe is fitted with the wooden seat frame to give additional strength to the structure. Complete understructure is made by gluing, nailing & stapling. · Foam: Seat is made of PU foam with density 28 kg/m3 with a top layer of supersoft PU foam with density 32 kg/m3. Seat front bottom is stapled with the PU foam with density 28 kg/m3. · Upholstery: Seat upholstery is made in polyester fabric, having fabric partitions stitched. 2. Backrest : · Understructure: Understructure is made up of combination of plywood & pinewood members. Plywood is 12±1mm thk. [moisture resistance & termite proof as per IS:303] & pinewood are of cross sections 16x35mm & 16x74mm without having major knots & defects on the surface. Non-woven is stapled on the back and front bottom of the structure. · Foam: Backrest is made of PU foam with density 28 kg/m3 which serves as the bottom layer. This is covered with a top layer of supersoft PU foam with density 32 kg/m3. The top surface has supersoft PU foam with density 32 kg/m3 . The front and the top surfaces of the backrest are then covered with a layer of recron sheet of 200gsm. The back surface of backrest is glued with the PU foam with density 28 kg/m3.· Upholstery: Backrest upholstery is made in polyester fabric. Head cover is draped over the backrest, which can be dry cleaned. Armrest [LH & RH]:· Understructure: Understructure is made of combination of plywood & pinewood members. Plywood is 12±1mm thk. [moisture resistance & termite proof as per IS:303] & pinewood are of cross section 16x35mm without having major knots & defects on the surface. 3mm MDF and non-woven is stapled on the structure to provide a surface for sticking foam. · Foam: A layer of EVA sheet is glued on the top surface of the armrest to give extra cushion. PU foam with density 28 kg/m3 is pasted on top of this and around the entire armrest. The front and the inside surfaces of the armrest are then covered with a layer of recron sheet of 200gsm. · Upholstery: Armrest upholstery is made in polyester fabric. 4. Coffee Tray: Three seater sofa has a Coffee Tray made up of powder coated 2mm thk Aluminium sheet. 5. Legs: Plastic legs with the M8 stud are fitted at the bottom surface of the Armrest LH & RH. 6. Assembly: Upholstered seat, backrest, armrest-LH & armrest-RH are assembled together with the M8 bolts, nuts & washer. Then a non-woven is stapled on the bottom surface to cover the structure. 7. Packet: Each packet contains one assembled sofa without legs and a separate hardware packet containing 4 nos. of plastic legs.

2-Seater Sofa (S2) 2 str-Overall Size :Width : 144cm Depth : 83cmHeight : 86.5cm Seating Height : 46cm. · Understructure: Understructure is made up of combination of plywood & pinewood members. Plywood is 12±1mm thk. [moisture resistance & termite proof as per IS:303] & pinewood are of cross sections 22x64mm, 34x64mm & 16x35mm without having major knots & defects on the surface. Zigzag spring of dia. 3.8mm is mounted on the seat structure using plastic spring mounting clip for support & additional cushioning purpose. Non woven fabric is stapled on the seat structure frame above the spring asly. to avoid direct contact between the metal springs and the seat foam. This prevents seat foam from tearing. Powder coated MS support pipe is fitted with the wooden seat frame to give additional strength to the structure. Complete understructure is made by gluing, nailing & stapling. · Foam: Seat is made of PU foam with density 28 kg/m3 with a top layer of supersoft PU foam with density 32 kg/m3. Seat front bottom is stapled with the PU foam with density 28 kg/m3. · Upholstery: Seat upholstery is made in polyester fabric, having fabric partitions stitched. 2. Backrest : · Understructure: Understructure is made up of combination of plywood & pinewood members. Plywood is 12±1mm thk. [moisture resistance & termite proof as per IS:303] & pinewood are of cross sections 16x35mm & 16x74mm without having major knots & defects on the surface. Non-woven is stapled on the back and front bottom of the structure. · Foam: Backrest is made of PU foam with density 28 kg/m3 which serves as the bottom layer. This is covered with a top layer of supersoft PU foam with density 32 kg/m3. The top surface has supersoft PU foam with density 32 kg/m3 . The front and the top surfaces of the backrest are then covered with a layer of recron sheet of 200gsm. The back surface of backrest is glued with the PU foam with density 28 kg/m3.· Upholstery: Backrest upholstery is made in polyester fabric. Head cover is draped over the backrest, which can be dry cleaned. Armrest [LH & RH]:· Understructure: Understructure is made of combination of plywood & pinewood members. Plywood is 12±1mm thk. [moisture resistance & termite proof as per IS:303] & pinewood are of cross section 16x35mm without having major knots & defects on the surface. 3mm MDF and non-woven is stapled on the structure to provide a surface for sticking foam. · Foam: A layer of EVA sheet is glued on the top surface of the armrest to give extra cushion. PU foam with density 28 kg/m3 is pasted on top of this and around the entire armrest. The front and the inside surfaces of the armrest are then covered with a layer of recron sheet of 200gsm. · Upholstery: Armrest upholstery is made in polyester fabric. 4. Coffee Tray: Three seater sofa has a Coffee Tray made up of powder coated 2mm thk Aluminium sheet. 5. Legs: Plastic legs with the M8 stud are fitted at the bottom surface of the Armrest LH & RH. 6. Assembly: Upholstered seat, backrest, armrest-LH & armrest-RH are assembled together with the M8 bolts, nuts & washer. Then a non-woven is stapled on the bottom surface to cover the structure. 7. Packet: Each packet contains one assembled sofa without legs and a separate hardware packet containing 4 nos. of plastic legs.

3-Seater Sofa (S3) 3 str-Overall Size :Width : 183cm Depth : 83cmHeight : 86.5cm Seating Height : 46cm. Seat :· Understructure: Understructure is made up of combination of plywood & pinewood members. Plywood is 12±1mm thk. [moisture resistance & termite proof as per IS:303] & pinewood are of cross sections 22x64mm, 34x64mm & 16x35mm without having major knots & defects on the surface. Zigzag spring of dia. 3.8mm is mounted on the seat structure using plastic spring mounting clip for support & additional cushioning purpose. Non woven fabric is stapled on the seat structure frame above the spring asly. to avoid direct contact between the metal springs and the seat foam. This prevents seat foam from tearing. Powder coated MS support pipe is fitted with the wooden seat frame to give additional strength to the structure. Complete understructure is made by gluing, nailing & stapling. · Foam: Seat is made of PU foam with density 28 kg/m3 with a top layer of supersoft PU foam with density 32 kg/m3. Seat front bottom is stapled with the PU foam with density 28 kg/m3. · Upholstery: Seat upholstery is made in polyester fabric, having fabric partitions stitched. 2. Backrest : · Understructure: Understructure is made up of combination of plywood & pinewood members. Plywood is 12±1mm thk. [moisture resistance & termite proof as per IS:303] & pinewood are of cross sections 16x35mm & 16x74mm without having major knots & defects on the surface. Non-woven is stapled on the back and front bottom of the structure. · Foam: Backrest is made of PU foam with density 28 kg/m3 which serves as the bottom layer. This is covered with a top layer of supersoft PU foam with density 32 kg/m3. The top surface has supersoft PU foam with density 32 kg/m3 . The front and the top surfaces of the backrest are then covered with a layer of recron sheet of 200gsm. The back surface of backrest is glued with the PU foam with density 28 kg/m3.· Upholstery: Backrest upholstery is made in polyester fabric. Head cover is draped over the backrest, which can be dry cleaned. Armrest [LH & RH]:· Understructure: Understructure is made of combination of plywood & pinewood members. Plywood is 12±1mm thk. [moisture resistance & termite proof as per IS:303] & pinewood are of cross section 16x35mm without having major knots & defects on the surface. 3mm MDF and non-woven is stapled on the structure to provide a surface for sticking foam. · Foam: A layer of EVA sheet is glued on the top surface of the armrest to give extra cushion. PU foam with density 28 kg/m3 is pasted on top of this and around the entire armrest. The front and the inside surfaces of the armrest are then covered with a layer of recron sheet of 200gsm. · Upholstery: Armrest upholstery is made in polyester fabric. 4. Coffee Tray: Three seater sofa has a Coffee Tray made up of powder coated 2mm thk Aluminium sheet. 5. Legs: Plastic legs with the M8 stud are fitted at the bottom surface of the Armrest LH & RH. 6. Assembly: Upholstered seat, backrest, armrest-LH & armrest-RH are assembled together with the M8 bolts, nuts & washer. Then a non-woven is stapled on the bottom surface to cover the structure. 7. Packet: Each packet contains one assembled sofa without legs and a separate hardware packet containing 4 nos. of plastic legs.

Coffee Table ( (T5) Providing & Placing Coffee Table . The table should be a center table glass : it should be 12 ±0.3 mm thick black tinted toughened glass uv glued with bushes made in ss 202 grade for fixing with understructure. pshould be a center table understructure : it should be a welded assembly made in ss202 grade having dia. 12±0.04 as per should be :1762. Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm. The OEM Should be havig valid ISO 9001:2015, ISO-14001:2015 , ISO 50001:2018 , ISO 45001:2018, OHSAS- 18001:2007 certificates, BIFMA membership since past 10 years.

Sofa side table (SST) Providing & placing corner table . The table should be a center table glass : it should be 12 ±0.3 mm thick black tinted toughened glass uv glued with bushes made in ss 202 grade for fixing with understructure. pshould be a center table understructure : it should be a welded assembly made in ss202 grade having dia. 12±0.04 as per should be :1762. Width of table= 60.0 cm, Depth=60.0 cm, height=35.1 cm. The OEM Should be havig valid ISO 9001:2015, ISO-14001:2015 , ISO 50001:2018 , ISO 45001:2018, OHSAS- 18001:2007 certificates, BIFMA membership since past 10 years.

Rest room bed (BD1) Overall Size : a) In sofa condition:- Length : 200cm Width : 104.5cm Height : 97.5cm Seat Height : 46.5cm b) In bed condition:- Length : 200cm Width : 155cm Height : 77.5cm Seat Height : 46.5cm Upholstery • Material : Fabric in polyester and Synthetic Leather in PVC • Shade : Fabric : Brown Syn Lth : Coffee Brown • Thickness : 1 mm • Frame : Understructure : Combination of Plywood and Pinewood Plywood thickness : 12 mm Pine wood cross section : 35x105 mm (Moisture resistant and termite proof. Webbing : S spring of dia 4.3 mm . 2 nos powder coated MS pipe is fitted with wooden seat frame to get additional strength Backrest : Combination of Plywood and Pinewood Plywood thickness : 12 mm Pine wood cross section : 35x105 mm (Moisture resistant and termite proof 3 mm MDF is stapled at the back of the structure • Foam : Seat : Slat stock foam of 28 kg/cubic meter with a top layer of supersoft PU foam with density 32 kg/cubic metre Back : Slat stock foam of 28 kg/cubic meter with a top layer of supersoft PU foam with density 32 kg/cubic metre • Cushions : Filled with loose conjugated polyester fibres • Storage : The under seat storage structure is made of 18mm E1 grade Prelaminated Particle Board. Rubber bushes are fitted at the bottom to provide traction to the entire sofa • LH and RH armrest : Combination of plywood & pinewood members with SS rod

Jaspals Inc

GODREJ AND BOYCE MFG CO. LTD