Repair and Renovation to APWD Guest House at Wright Myo SW Providing IEI and EEI

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. a) Group C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

b) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. (For Light Plugs to be used in non Residential Building)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying of pre-wired for LED, power saving Decorative box type LED tube Batten fittings, 4' powder coated for LED tube upto1x 22 W similar to HAVELLS Regal Batten and 4'x20watts ultra bright, heat sink, High efficiency, power saving Linear LED T8 Tube Lamp, Sim to HAVELLS TITANIA NEO LED Tube light (Single side connection) or its equivalent, etc., as required.

Supplying of pre-wired Eco-friendly and energy saving LED RECESS mounted 2'x2' SQUARE backlit panel type fittings, powder coated white CRCA, full glow LED panel light 34 watt 2'x2'. Similar to HAVELLS PLUTO NEO PANEL 2x2 series, Cat No. PLUTONEO2X2PLR34WLED840S or its equivalent, etc., as required.

Supplying of LED Mirror light fittings, 14 watts with high output PMMA diffuser for glare free light of size 600 mm. Similar to Crompton LINNET Cat No. LCL-14-CDL or its equivalent, etc., as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Supplying of BLDC AC Ceiling Fan (1200 mm) Sweep (ISI Marked) Similar to Havells: Efficiencia Neo (BLDC 26W) Five Star with Socket Type Electronic regulator i/c wiring down rod of standard length (upto 30 cm) with all accessories or its equivalent etc as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Installation, Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.

Supplying of Integrated LED Bulk Head Luminaire, 13.5W LED 6000 K comprises of PDC Al housing and milky diffuser similar to HAVELLS ELLIPSE NEO PIR HEXA Series LED Bulk Head Cat No. LHEXCGP7UN5W013 or its equivalent, etc., as required.

Supplying and fixing brass batten/ angle holder including connection etc. as required

Supplying of LED Retrofit Bulbs 10 Watts B22 (Cool Day Light). Similar to HAVELLS LED ADORE 10 W B22 CDL 3 STAR LAMP, Ordering Code No. LHLDEUEEML8010 or its equivalent, etc., as required.

Supplying of Exhaust fan of size 150 mm sweep with protective bird guard (similar to HAVELLS Ventil Air DXWE or equivalent with ISI) or its equivalent, etc., as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. a) Upto 450 mm sweep

Supplying & Fixing of LED Gate light fittings made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22 base including 1 No. 20 Watt LED lamp and Mounting Pole Dia - 60 mm (max) OD. Similar to HAVELLS MUSHROOM (PRISMATIC) LED Gate light fittings, Cat No. LHFXAMN1TN6F035 or its equivalent, etc., as require

Supplying, Installation, Testing and commissioning of 1.5 Ton 4/5 star rating High Wall Split Type Inverter Air Conditioner Single Phase 220 Volts. Similar to Make HITACHI KIYORA 51300X I CLEAN INVERTER - R410A, Model No: RSRG518IEEA or its equivalent. (Condenser Coil must be of copper material)

Supplying and fixing of 4 KVA Voltage stabilizer suitable for 1.5 ton Air Conditioner as required. Make: V-guard Model VGN 400 (Voltage Range 170V-280 V, 12 amps.) or its equivalent, etc., as required.

Providing & Fixing of pre-fabricated stand for keeping outdoor units of 1.5/2 Ton capacity split type AC as required.

Supplying and fixing of Foot lamp of type 230V- LED Yellow night lamp similar to Make: Crabtree 4M LED Footlight cat No: ACAPFCGL04 or equivalent with connection or its equivalent, etc., as required.

Supplying and fixing of instant electric water heater 3 liters capacity similar to Make: HAVELLS Instanio 3L/3 KW Cat No. GHWAIAPWH003, having ISI rating along with flexible pipe connections or its equivalent, etc., as required.

Supplying, Installation, Testing and commissioning of 15 Watt Integrated All-in-one Solar standalone Street Lights with 75 watt Solar Panel, inbuilt 12 V charge controller (SCC), 60 AH solar LMLA battery, inbuilt dusk to dawn sensors including 05 meter Tubular pole (above ground) i/c erection of the pole in cement concrete and necessary metallic nut-bolts and accessories as required with 01 years comprehensive warranty for the complete set with all accessories etc as required. Similar to HAVELLS LED Solar standalone street light. Cat No. 15 W Solar SLS or its equivalent, etc., as required.

Providing earthing with safe earthing electrode of galvanization 80 to 100 microns, length 2 mtr, outer dia 50 mm, inner dia 19 mm and inner space be filled with crystalline conductive mixture including filling -up with electrolite (Back fill compound) as required for safe earth electrode and providing masonary enclosure with cover plate having locking arrangement etc. as required. (Ashlok)

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 4 way (4 + 12), Double Door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required a) Single Pole

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 63 Amps

AKABEA INFRASTRUCTURES PRIVATE LIMITED

JAY ENGINEERING

JOY GURU ENTERPRISES

M/s Sai Electrical Works