Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹80,000
Closing Date
29 Jul 2026, 6:00 pm
GE AF
KANGEYAMPALAYAM
REPAIR/ MAINT OF STARTER PANELS, PUMPS, MOTORS, FOOT VALVES, FILTERATION EQUIPMENTS MISC E/M WORKS AT CERTAIN LOCATIONS AT AF STN SULUR
2026_MES_777552_1
8893/E8
Open Tender
Miscellaneous Works
300 days
GE AF SULUR
PLEASE REF TO TENDER DOCUMENTS
6 documents required · 6 mandatory
₹500
GE AF SULUR
₹80,000
9 Jul 2026
9 Jul 2026
31 Jul 2026
9 Jul 2026
29 Jul 2026
23 Jul 2026
11 Jul 2026 - 16 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Disconnecting electric connection and taking out submersible sewage cutter pump set of capacity 10 HP, 3 Phase, 415Volt from sewage well, transport to the workshop and back for making the serviceable/ repair, dismantle the motor/ pump, taking out burnt winding of stator, removal of burnt insulation material from the slot, cleaning the stator slots, rewinding the stator using super enamelled, submersible grade copper winding wire of same gauge and turns, cleaning and overhauling the pump, tightening impeller complete including replacing the following unserviceable spares, reinstall the pump in original position and testing at full load capacity complete all as specified and as directed by Engineer-in-Charge.
Note: The replacement of spares shall be measured and paid separately as supply only. However, cost of labour for replacement shall be deemed to be included in the quoted rate. | 3 | EACH JOB | - | - |
| 2 | Supply only Coil wound set with class "F" insulation suitable for submersible sewage cutter pump set of capacity 10 HP | 3 | EACH | - | - |
| 3 | Supply only Mechanical seal lower suitable for submersible sewage cutter pump set of capacity 10 HP | 3 | EACH | - | - |
| 4 | Supply only Mechanical seal upper suitable for submersible sewage cutter pump set of capacity 10 HP | 3 | EACH | - | - |
| 5 | Supply only Fastner Set suitable for submersible sewage cutter pump set of capacity 10 HP | 3 | EACH | - | - |
| 6 | Supply only "O" Ring & gasket set suitable for submersible sewage cutter pump set of capacity 10 HP | 3 | EACH | - | - |
| 7 | Supply only Ball Bearing set suitable for submersible sewage cutter pump set of capacity 10 HP | 3 | EACH | - | - |
| 8 | Aligning and balancing of Rotor with S.P Sleeve including balancing as required at site suitable for submersible sewage cutter pump set of capacity 10 HP | 3 | EACH | - | - |
| 9 | Aligning and balancing of Impeller including balancing work suitable for submersible sewage cutter pump set of capacity 10 HP | 3 | EACH | - | - |
| 10 | Disconnecting electric connection and taking out submersible sewage cutter pump set of capacity 3 HP, 3 Phase, 415Volt from sewage well, transport to the workshop and back for making the serviceable/ repair, dismantle the motor/pump, taking out burnt winding of stator, removal of burnt insulation material from the slot, cleaning the stator slots, rewinding the stator using super enamelled, submersible grade copper winding wire of same gauge and turns, cleaning and overhauling the pump, tightening impeller complete including replacing the following unserviceable spares, reinstall the pump in original position and testing at full load capacity complete all as specified and as directed by Engineer-in-Charge.
Note: The replacement of spares shall be measured and paid separately as supply only. However, cost of labour for replacement shall be deemed to be included in the quoted rate. | 3 | EACH JOB | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.33 MB
COMMON_PAGES_8893.pdf
Tender Documents • 0.56 MB
PS_8893.pdf
Additional Documents • 0.49 MB
BOQ_870821.xls
BOQ • 5.60 MB
Download all tender documents and submit your bid