Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.7 LAccepted-AOC BIRWAN BRIDGE UDHAMPUR J K 182104 | UDHAMPUR | UDHAMPUR | JAMMU AND KASHMIR | 182104 | L1 | Accepted-AOC Being reasonable and lowest | |
| 2 | L2₹11.3 L+₹59,400 (5.56%)Rejected-Finance NEW JAIL ROAD UDHAMPUR 182101 J K | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹13.0 L+₹2.3 L (21.9%)Rejected-Finance | L3 | Rejected-Finance Not being L1 |
Tender Value
₹11.5 L
EMD Value
₹23,000
Closing Date
28 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col Sachin Sharma CWE
Military Engineer Services, Commander Works Engineer, Udhampur, PO - Garhi, Udhampur-182121
PROVN OF ROAD AND PATHWAY AT GOLF VIEW ENCLAVE UNDER GE (SOUTH) UDHAMPUR
2023_MES_578433_1
CWE/U(S)-81/2022-23
Open Tender
Civil Works - Roads
Item Rate
180 days
Udhampur
As per NIT
7 documents required · 7 mandatory
₹500
GE (South) Udhampur
₹23,000
Yes
20 Mar 2023
1 Feb 2023
7 Mar 2023
1 Feb 2023
28 Feb 2023
15 Feb 2023
Amount
Surface excavation not exc. 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified by the Engr-in-Charge.
Rolling and consolidating formation surface with 8 to 12 tonne power rolling , including filling in soft sports, hollows and depressions etc. which occurs during rolling ( for portion coming in cutting/original ground only ) to required level gradient or camber etc. including watering before or during rolling complete all as specified.
Soling (or sub base), 150 mm thick (spread thickness), with broken boulders or quarried stone (granite/ basalt) including filling of interstices, surface formed and rolled and consolidated to required gradient and camber with power roller of capacity 8 to 12 tonne, complete all as specified and directed by Engineer-in-Charge.
150mm thick (Compacted thickness) WBM in two equal layers 75mm (each layer compacted seprately) with coarse aggregates of grading 2 (63 to 40mm size) or of grading 2 (50 to 20mm size) of granite, trap or basalt spreading and compaction with 8 to 12 tonne power roller and consolidated to required gradient and camber complete all as specified and directed.
Preparing un-surfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc., and applying evenly a priming / tack coat on un-surfaced water bound macadam surfaces with paving bitumen primer using bitumen VG-10 paving grade ( 80 -100 penetration) @ 10 Kg per Ten Square Metre with tar boiler and including Bituminous premix asphaltic semi dense concrete 40mm consolidated thickness with 5.5% paving bitumen using bitumen VG-30 paving grade ( 50 -70 penetration) binder content by weight of total mix rolled and compacted to required camber and gradient, complete, all as specified and as directed by the Engineer-in-Charge.
Premix bituminous macadam with 4% paving using bitumen VG-30 paving grade ( 50 -70 penetration) bitumen binder, laid/rolled and compacted to required gradient and camber (consolidated thickness upto maximum 75mm), complete, all as specified and as directed by the Engineer-in-Charge. Note: Repair to pot holes any depth not exc 1 sqm each depression in patch over 50mm, shall also be carried out under this item.
Note for item No. 5 to 7 : (a) Preparation of mix in hot mix plant, spreading by self propelling mechanical paver and rolling and compaction by set of rollers as specified in particular specifications shall be carried out. Hot mix plant may be installed at any distance but the contractor shall be responsible for maintaining the required temperature of mix under all conditions till it is laid and compacted. Unit rate against these items shall include for carrying out the works with deployment of these machinery for which nothing extra shall be payable and no delay in completion of work shall be acceptable on this account. (b) To achieve marshal stability of 1050 KN and all as per SSR Part-I Clause No. 20.B.4. (c) If qty of binder contents is less than the qty as specified in respective items of BOQ, it shall be adjusted at supply only rates of paving bitumen @ Rs 60.00 Per Kg and if qty of binder contents is more than the qty as specified in respective items of BOQ no adjustment shall be made.
Removing excavated material exc. 250m and depositing where directed at a level n exc. 500 m above the starting point, complete all as specified and as directed by Engr-in-Charge.
100mm thick Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregates as in sub base to floors and the like, complete all as specified and as directed by Engr-in-Charge.
M&L for Hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed by Engr-in-Charge.
40 mm thick, Plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in sub base , complete all as specified and as directed by Engr-in-Charge.
Sand cushioning under floors including watering and consolidation complete all as specified and as directed by Engr-in-Charge.
Factory made machine pressed / vibro mechenically floated coloured interlocking cement paver block (glossy finish) ISI marked, any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade, with topping of cement with imported pigment. Shape shall be approved by Engr-in-Charge.
Providing, pre-cast cement concrete 1:2:4 type B-I (20mm graded) as in kerb stones and in similar works bedded and jointed in cement morter 1:4, complete all as specified and as directed by Engr-in-Charge. (Size : to be approved by Engr-in-Charge)
75mm thick Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete all as specified and directed by Engineer-in-Charge.
M&L for Boulder filling dry ,hand packed tightly , complete all as specified and as directed by Engr-in-Charge.
Continuous brick edging, with width equal to the width of the brick, laid dry on end vertically with burnt clay bricks of sub class 'B' bricks, complete all as specified and directed. Note: Rate deem to include necessary earth work and removing surplus soil upto distance 50mtr.
25 mm thick, Plain cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in sub base for laying floor finishes including finishing the surfaces even and rough without using extra cement, complete all as specified and as directed by Engr-in-Charge.
M&L for Chequered cement concrete tiles 30cm x 30cm x 22-25mm thick, machine pressed; set jointed and pointed in neat cement slurry with grey cement & pigments and in floors, and cut and polished , over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes, complete all as specified and as directed by Engr-in-Charge.
Material and labour for applying 2.5 mm thick retro reflective painting of specified shade/colour etc., either continuous or broken lines, to the required width and length over the existing painted surface/ new bituminous surface with solvent based road marking paint (Retro reflective paint) brand approved by MORTH, IRTC and AAI including supply of paint material at the rate of 5 Kg per Sqm and glass beads at the of 0.35 Kg per Sqm (Reflective Index 1.5) using semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass bead dispenser, propane ank heater and profile shoe heater driven by experienced operator on road including all materials, labour, T&P and cleaning the road surface of dirt, seals oil, gease and foreign materials etc., complete all as specified and directed by GE/Engr-in-Charge. (Note: Retro reflective paint shall be applied as per manufracturers instructions along with MORTH technology and speciality). Note : Contractor shall have to furnish the detail that quantity minimum used per square meter is 5.00 Kg/Sqm. Make: ASIAN (PRIMER APCOGRIP AND RETRO REFLECTIVE THERMOPLASTIC ROAD MARKING MATERIAL APCO MARK) or equivalent in performance of makes as specified in particular specifications.
Cat eye of size 100 mm x 100mmx18.5mm made of ABS material two reflectors fitted in the body, weight of cat eye 130 gm approx, designed for dynamic loads, fixed in repairs, complete all as specified and as directed by Engr-in-Charge. Make : Cat part No DA-978(B) of make Dark eye or equivalent in performance of make Greenlite/Yash/Gunnebo/makes specified in PS.
Dark eye solar studs RED,Amber or white of size 100 x 100 x 21, height without stump - 21mm, height with stump 55mm, stump dia 33mm, LEDs electronically operated with 4 Nos solar cell, Battery - 1600MA/1.2 volts Ni-Mh mono-crystalline 2.4v/0.3 watt, aluminium reflective frame- ploycarbonate weight of stud 360 gms fixing in repairs, complete all as specified and as directed by Engr-in-Charge.
Delineators made of ABS plastic fitted with two Nos. 100 mm dia highly reflective reflectors made of PMMA on both sides of the post and mounted on mild steel pipe of 50 mm duly powder coated height 800mm, anti rust etc including fixed in PCC block (size 30x30x30 cm) of PCC 1:2:4 Type B-I, including taking down old delineators, complete all as specified and as directed by Engr-in-Charge. Note : Cost of PCC and earth work is deemed to be included in unit cost.
SINGH CONST CO
RAJ MOHD
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .