Providing and fixing different types of Electrical works at various areas under AE(E)Mtce Lodhi Road, New Delhi.

Amount

Providing and fixing of the following items including dismantling the old existing electrical accessories (where ever required), making suitable necessary modification/arrangement (i/c petty items such as copper wires) for fixing the new items and making connections, testing etc complete as reqd as per the site location given by the Engineer-in-Charge. a) 1 x 28 watt T-5 electronic ballast suitable for existing sleek T5 fittings. (Make: Havells/Philips/Osram/Wipro)

b) 2 x 28 watt T-5 electronic ballast suitable for existing sleek T5 fittings.(Make: Havells/Philips/Osram/Wipro)

c) 1x36 watt electonic ballast suitable for existing FTL/CFL-L fittings. (Make: Havells/Philips/Osram/Wipro)

d) 2x36 watt electonic ballast suitable for existing sleek FTL/CFL-L fittings. (Make: Havells/Philips/Osram/Wipro)

e) Tube light Starter 20-40 W, 230V. (Make: Surya/Havells/Cona/Philips/Wipro)

f) 36 watt T-8 Tube. (Make: Havells/Bajaj/Philips/Wipro)

g) 28 watt T-5 Tube. (Make: Havells/Bajaj/Philips/Wipro)

h) 40 Ampere AC-3 rating three pole contactor along with front mounting Add on aux. contact block (2 NO + 2 NC). (Make: L&T MNX40).

i) Thermal overload relay. Relay Range (A): (24-40). (Make: L&T MN2 type)

j) Electronic timer ON delay (3-30 Secs), 240VAC, 50Hz. (Make: L&T type ST 100 Cat No. ST80328OOOO / GIC Series ETR 550)

k) Single Phase preventer relay. (Make: L&T SPPR type Sz5)

l) Single Phase preventer relay. (Make: L&T SPPR type SDz5)

m) 70 Watt (E) HPSV lamp (Make: Philips/ Wipro/ Surya/ Bajaj/ Crompton/ Havells/ Osram)

n) 125 Watt (BC) HPMV lamp (Make: Philips/ Wipro/ Surya/ Bajaj/ Crompton/ Havells/ Osram)

o) 70 watt Electomagnetic Copper ballast. (Make: Philips/ Wipro/ Ledvance/ Surya/ Bajaj/ Crompton/ Havells)

p) 125 watt HPMV ballast. (Make: Philips/ Wipro/ Ledvance/ Surya/ Bajaj/ Crompton/ Havells)

q) Ignitor for 70-400 SV/MH. (Make: Philips/Wipro/Surya/Bajaj/Crompton/Havells)

r) Capacitor for 70 &125 watt MV/SV/MH. (Make: Philips/ Wipro/ Surya/ Bajaj/ Crompton/Havells)

Complete repairing and overhauling of 25 HP rating three phase induction motor and centrifugal pump Kirloskar make (DB-40/26) including dismantling and opening of pump set casing, separating rotating assembly cleaning and separating all sub parts of assembly, carrying out impeller repairing, filling of shaft and machining,supplying and fixing/fitting of following spares such as impeller neck ring/casing wear ring,shaft sleeve,sleeve nut, ball bearing including greasing,coupling, locking key,replacement of mechanical seal etc i/c greasing,reinstallation after repairing and fitting in assembly in the pump set complete with making alignment with existing motor and fixing of coupling and casing etc and making electrical connections (including star delta starter connections) of pump set complete as required as per the site location.

Providing, laying, fixing, testing & commissioning of 'C' class G.I pipe (heavy class) conforming to IS 1239 / 3589 on the terrace/ wall / ceiling with suitable clamps/ horizontal/ vertical position including making suitable necessary modification and providing required threaded G.I fittings like elbows, tees, socket, union, plug,cross threaded, nipple,cap plug,tapers, nuts bolts, gaskets etc and painting the G.I pipe with two or more coats of synthetic enamel paint of required shade complete as required as per site requirement and as per instructions of Engineer-in-charge. (Make: Jindal/Tata/Surya Prakash) a) 50 mm dia.

b) 40 mm dia.

Avadh Electric Company