GE (N) P/TOKEN-54 OF 2019-2020 PROVISION OF CERTAIN LBW, RW AND SPECIAL REPAIR WORKS IN THE AREA OF AGE E/M UNDER GE (NORTH) PUNE

Amount

Excavation in trenches not exc.1.50m wide and not exc.1.50m in depth for foundation, cable, pipe etc. or for shafts, wells, cesspits, manholes, pier holes, pole/ stays etc. n. exc 10 sq m on plan and getting out in soft/ loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and as directed.

Removing of excavated material (soil) to distance not exceeding 50metre and deposited where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.

Supply, Installing, testing and commissioning of online double conversion UPS of 3 phase in/ 3 phase out with one hour battery backup ( 12V/ 42Ah x 15 Nos.) of capacity 10 KVA with necessary electrical connectios with 2 years warranty for UPS and 2 years warranty for batteries complete all as specified and as directed. Make: Tata- Liebert, APLAB, Luminous, Su-Kam, Microtek

Taking down carefully unserviceable point wiring of any description/ type/ size of light/ fan / tube/ power / two way/ bell etc. on TW batten/ conduit including removal of batten/ conduit/ gutties/ wooden boards/ switch/ sockets/ regulators/ holders/ ceiling roses/ call bells, light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ ceiling so as to match with the existing finishes complete all as directed.

Taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including MCBs any type/ capacity and making good the disturbed surfaces of wall/ ceiling to match with the existing finishes complete all as directed.

Taking down the unserviceable submain wiring of any type/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as directed.

Material and labour for point wiring using approved colour coding as per IS, with multistranded FRLS copper conductor 1.5 Sq. mm (nominal area), two single core PVC insulated and unsheathed multistranded cable 1100 volts grade ISI-694 marked through and including heavy duty ISI marked, 20 mm dia rigid PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ ceiling etc, with GI terminal sunken boxes 1.2mm thick 60mm deep of suitable size as per site requirement, covered with modular white cover plate with frame suitable for housing modular switches, sockets, regulators etc. including PVC insulated multistranded FRLS copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor and connecting to the common earth dolly for one light point controlled by one, one way switch 5 Amps complete all as specified and as directed.

All as per serial item No.08 here-in-before but point wiring for one ceiling/ exhaust fan point controlled by one, one way switch 5 Amps and regulator.

All as per serial item No.08 here-in-before but point wiring for one 3 pin 5 Amps socket outlet controlled by one switch on same board.

All as per serial item No.08 here-in-before but point wiring for one 3 pin 5 Amps socket outlet controlled by one switch on independent board.

All as per serial item No.08 here-in-before but point wiring for one bell point controlled by one bell switch 5 Amps.

All as per serial item No.08 here-in-before but point wiring for one light point controlled by two, two way switch 5 Amps.

All as per serial item No.08 here-in-before but with FRLS copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor for 3 pin 15 Amps socket outlet on independent board.

Material and labour for point wiring using approved colour coding as per IS, with copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed multistranded FRLS cable 1100 volts grade, ISI-694 marked drawn through and including heavy duty PVC casing and caping including all accessories etc, with mild steel sunken boxes 1.6 mm thick, 60mm depth of suitable size including fixing/ grouting sunken as per site requirement and making good to match with existing finishes including provision of 3mm thick ISI marked hylem sheet for mounting the switches/ sockets/ regulators etc including PVC insulated multistranded FRLS copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor along with wiring and connecting to the common earth dolly for one 3 pin 5 Amps socket outlet controlled by one switch on independent board complete all as specified and as directed.

Supply and fix for modular switch, one way 6 Amps, 1 module complete all as specified and as directed.

Supply and fix for modular switch, one way, 16 Amprs, 1 module with neon indicator complete all as specified and as directed.

Supply and fix for switch piano flush type, single pole, one way, 6 Amp complete complete all as specified and as directed.

Supply and fix for modular socket outlet multi purpose having provision for 2/3 pin 6 Amps, combined 2 module complete all as specified and as directed.

Supply and fix for modular socket outlet multipurpose, 2/3 pin, 6/16 Amps, combined 2 module complete all as specified and as directed.

Supply and fix for socket outlet multipurpose having provision for 3 pin, 6 Amp and 2 pin, 6 Amp, piano flush type complete all as specified and as directed.

Supply and fix for ceiling rose, 2/3 terminals, PVC/ polycarbonate type, isolated body suitable ISI marked complete all as specified and as directed.

Supply and fix for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

Suply and fix for bell electric ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

Supply and fix for modular type bell push one way 6 Amps 230 volts 50 Hz AC supply 1 module complete all as specified and as directed.

Supply and fix for lamp holder, PVC body/ polycarbonate type with back plate suitable batten/ slanting fittings complete all as specified and as directed.

Supply and fix for sheet metal enclosures single pole and neutral with a two pin and earth plug and socket complete with one MCB SP 20 Amp complete all as specified and as directed.

Supply and fix for highly efficient LED bulbs 10W with lumens out put not less than 1000 lumens, used as ready replacement for existing GLS/ CFL direct fit lamp in B-22 cap of make Havells/ Philips/ Wipro/ Bajaj/ HPL as approved complete all as specified and as directed.

Supply and fix for wall mounted LED 18 watts with with lumens out put not less than 1800 lumens, box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver connector block etc complete with all accessories internally pre wired all as per Cat No. BLRB-DB118 & BLRB 18W CWC of make Bajaj or equvalent of make Philips/ Wipro/ Havells/ Syska/ Jaguar as approved and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 18 watts complete all as specified and as directed.

Supply and fix for wall mounted LED 20watts with lumens out put not less than 2000 lumens, box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver connector block etc complete with all accessories internally pre wired all as per Cat No. BCLAB 20W of make Bajaj, Cat No. LL20-281-XXX065-ALI of Wipro or equvalent of make Philips/ Havells/ Syska/ Jaguar as approved and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 20watts complete all as specified and as directed.

Supply and fix for LED 10 watts batten aluminium extruded with decorative end caps all as per Cat No. BCLSB 10 NW/ WH of make Bajaj, Wipro Cat No. LL20-111-XXX-65-NE or its equivallent model in Havells, Philips as approved complete all as specified and as directed.

Supply and fix for energy saving new generation 10 watts LED bulk head fitting with lumens out put not less than 1000 lumens, IP-65 luminaire with opal diffuser prewired and necessary mounting arrangements, provision of 3 core multistranded copper conductor of size 23/0.193 from ceiling rose with LED bulb all as per Cat No.BIBWP 10W LED of make Bajaj or equvalent of make Philips/ Wipro/ Havells/ Crompton and taking down old existing unsesrviceable tube light fitting complete all as specified and as directed.

Supply and fix for LED down light recess mounted luminaire, round type 15 watts with efficiency of 100 lumens per watt, sleek design aluminium housing polycarbonate diffuser white finish operating voltage 150-270 volts AC, 50 Hz as per Cat No.BZSLO 15W WH of make Bajaj or its equavalent in Wipro, Philips, Havells complete all as specified and as directed.

Supply and fix for energy saving new generation environmental friendly long life versatile pressure die aluminium IP-66 for security light fitting luminaire of capacity 15 watt with high power LEDs as light source and electronic driver with lumens out put not less than 1500 lumens, with prewired of make Bajaj Cat No. BRLEP 15 W LED (Edge plus series), Philips Cat No. BRP040 or equvalent of make Wipro/ Havells/ Crompton as approved, necessary mounting arrangements and provision of 2.5 Sqmm 3 core copper conductor cable multistranded from ceiling rose to light fitting including 40mm dia 1.5 metres long GI pipe medium grade bracket of suitable shape with clamps made out of MS flat iron of size 40mm x 6mm, nuts, bolts including taking down old existing unsesrviceable tube light fitting complete all as specified and as directed.

S & F for Energy saving new generation environmental friendly LED street light luminaire with long life versatile pressure die-cast housing with toughened glass and individual LEDs with secondary optics and IP 66 protection with high power LEDs as light source and electronic driver of capacity 25 watts with lumens out put not less than 2500 lumens with pre wired and necessary mounting arrangementsnd provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with suitable MS clamps made out of flat iron of size 40 x 6 mm - 02 sets, bolt & nuts complete all as directed by Engineer- in-charge. Make :- Bajaj Cat No BRLEP 25W LED WH, or its equvalent in Philips, Wipro.

Taking out/ down the unserviceable earthing and making good the disturbed surfaces complete all as directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less then 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth lead strip 25mm x 3mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel and connected to main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm with one handle for lifting made out of 8mm dia MS bar, funnel, wire mesh, 20 mm bore galvanized steel tubing (medium grade) for watering, filling charcoal or coke and salt in alternate layers, 40mm bore galvanized steel tubing light grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown on electrical plate No.3 of SSR Part-I. (Note: GI earth wire and protection pipe upto 7.5metres shall be deemed to be included in quoted rate)

Material and labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less then 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth lead strip 32 x 6mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel and connected to main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm with one handle for lifting made out of 8mm dia MS bar, funnel, wire mesh, 20 mm bore galvanized steel tubing (medium grade) for watering, filling charcoal or coke and salt in alternate layers, 40mm bore galvanized steel tubing light grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown on electrical plate No.3 of SSR Part-I . (Note: GI earth wire and protection pipe upto 7.5metres shall be deemed to be included in quoted rate)

Material and labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less then 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel and connected to main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm with one handle for lifting made out of 8mm dia MS bar, funnel, wire mesh, 20 mm bore galvanized steel tubing (medium grade) for watering, filling charcoal or coke and salt in alternate layers, 15mm bore galvanized steel tubing light grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown on electrical plate No.3 of SSR Part-I . (Note: GI earth wire and protection pipe upto 7.5metres shall be deemed to be included in quoted rate)

Material and labour for sub main wiring with approved colour coding as per IS with two runs of single core PVC insulated FRLS cable with multistranded copper conductor of size 4.0 Sq. mm nominal area and drawing through and including 20 mm dia non metallic rigid heavy duty PVC conduit white/ ivory and conduit accessories concealed in wall including one run of single core PVC insulated 4.0 Sqmm (nominal area) multistranded FRLS copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Two runs of 4.0 Sqmm, one run of 4.0 Sqmm conductor and one run of PVC conduit will be measured as one unit)

Material and labour for sub main wiring with approved colour coding as per IS with two runs of single core PVC insulated FRLS cable with multistranded copper conductor of size 6.0 Sq. mm nominal area and drawing through and including 20 mm dia non metallic rigid heavy duty PVC conduit white/ ivory and conduit accessories concealed in wall including one run of single core PVC insulated 6.0 Sqmm (nominal area) multistranded FRLS copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Two runs of 6.0 Sqmm, one run of 6.0 Sqmm conductor and one run of PVC conduit will be measured as one unit)

Material and labour for sub main wiring with approved colour coding as per IS with four runs of single core PVC insulated FRLS cable with multistranded copper conductor of size 6.0 Sq. mm nominal area and drawing through and including 25 mm dia non metallic rigid heavy duty PVC conduit white/ ivory and conduit accessories concealed in wall including two runs of single core PVC insulated 6.0 Sqmm (nominal area) multistranded FRLS copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Four runs of 6.0 Sqmm, two runs of 6.0 Sqmm conductor and one run of PVC conduit will be measured as one unit)

Supply and fix for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

Supply and fix for sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

Supply and fix for Sheet metal enclosure MCB DB TPN 4 way vertical type with 200 Amps rated bus bar 415 volts double door with magnetic locking systen including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed.

Supply and fix for Sheet metal enclosure MCB DB TPN 6 way vertical type with 200 Amps rated bus bar 415 volts double door with magnetic locking systen including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed.

Supply and fix for MCCB 63 Amps, four pole, 415 Volts, adjustable type with thermal magnetic release, with breaking capacity 18 KA, Ics = 100% Icu with extended terminal including necessary electrical connections suitabe for fixing on DB complete all as specified and as directed.

Supply and fix for MCB TPN rated capacity 63 Amps, 415Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Supply and fix for MCB TPN rated capacity 40 Amps, 415Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Supply and fix for MCB SPN rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA 'C'curve complete all as specified and as directed.

Supply and fix in repair for MCB SP rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Supply and fix and testing change over switch ON LOAD type, open execution in existing panel, 415 Volt 50 Hz, AC, 4 pole, capacity 63 Amps rated current, manually operated with extended terminals type,interlocked to prevent opening when the switch os in ON position including taking down existing switch complete all as specifed and direcated. Make : Schinder/L&T/ Siemens

Supply and fix and testing change over switch ON LOAD type, open execution in existing panel, 415 Volt 50 Hz, AC, 4 pole, capacity 250 Amps rated current, manually operated with extended terminals type,interlocked to prevent opening when the switch os in ON position including taking down existing switch complete all as specifed and direcated. Make : Schinder/L&T/ Siemens

Supply ,installing, testing and commissioning in door type LT panel of suitable size, padestal mounted, CPRI approved factory made totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear side made of 3.15mm thick CRCA sheet, duly fabricated and having proper locking arrangement in both front and rear door and painted with powder coating paint and suitable for 500 volts, 50Hz, 3 phase 4 wire internal wiring system and comprising with and including following accessories and mounted on PCC plat form of 100mm thick in PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate), 1.0 metre all round the panel complete all as specified and as directed:- (Contd....)

S&F ceiling fan 1200mm sweep 5 star rated 240 volt AC with hanging rod, conopy set, clamps, bolts nuts and connecting with three core flexible PVC copper conductor cable of size 1.50 sqmm from ceiling rose to fan including removal of old unsv fan and handed over to store yard of AGE E/M (North) complete all as specified and directed. Make Bajaj Kessals 50 ISI, or its equivalant in Crompton, Havells. Note : Quoted Rate is deemed to inclusive of Stickering/Marking/ writing of MES numbers in bottom of ceiling Fan as directed by Engr-in-Charge.

Supply and fixing of exhaust fan metal body of 300mm sweep, 900 RPM, AC single phase including metallic louvers and shutter or mesh gaurd fixed in outside wall and connecting with three core flexible PVC copper conductor cable of size 1.50 sqmm from ceiling rose to fan complete all as specified and directed. Note : Quoted Rate is deemed to inclusive of marking/writing of MES numbers in motor of Exhaust Fan as directed by Engr-in-Charge.

Supply and fixing of exhaust fan plastic body of 200mm sweep, AC single phase, 240V heavy duty including louvers and connecting with three core flexible PVC copper conductor cable of size 1.50 sqmm from ceiling rose to fan including taking down old exhaust fan and depositing to store yard of AGE E/M North Pune complete all as specified and directed. Maqke: Bajaj Cat Part No. Maxma DX 8" or equivalent of Cromptoon, Havells

M & L for provision of holes in any type wall for fixing of Exhaust Fan 300 mm sweep heavy duty metal body including provision of fastener clamp, nut & bolts as required, making surface good with PCC and White/colour wash matching to the wall all as directed.

S & F for TPN phase segregated distribution board double door vertical type 6 way 415 volts, 50Hz suitable for MCCB incommer IP 43 protection fixing on wall/ floor with PCC block 1:2:4 of suitable size and electrical connections complete all as specified

S & F for TPN phase segregated distribution board double door vertical type 4 way 415 volts, 50Hz suitable for MCCB incommer IP 43 protection fixing on wall/ floor with PCC block 1:2:4 of suitable size and electrical connections complete all as specified

Taking up or down 20 mm bore steel tubing with all fittings and connections complete all as specified and as directed. Note for item 6 to 8: Excavation and earth work shall be measured and paid separately.

Taking up or down 25 mm bore steel tubing with all fittings and connections complete all as specified and as directed.

Taking up or down 40mm bore steel tubing with all fittings and connections complete all as specified and as directed.

Taking up or down 50mm bore steel tubing with all fittings and connections complete all as specified and as directed.

Fixing only 20mm bore steel water tubing 'medium grade' galvanised, after cleaning or rerunning the old screw threads with all fittings laid in trenches complete all as specified and as directed.

Fixing only 25mm bore steel water tubing 'medium grade' galvanised, after cleaning or rerunning the old screw threads with all fittings laid in trenches complete all as specified and as directed.

Fixing only 40mm bore steel water tubing 'medium grade' galvanised, after cleaning or rerunning the old screw threads with all fittings laid in trenches complete all as specified and as directed.

Fixing only 50mm bore steel water tubing 'medium grade' galvanised, after cleaning or rerunning the old screw threads with all fittings laid in trenches complete all as specified and as directed.

Supply and fix 20mm bore steel water tubing 'medium grade' galvanised, with all fittings as in trenches complete all as specified and as directed..

Supply and fix 20mm bore steel water tubing 'medium grade' galvanised, with all fittings fixed on wall complete all as specified and as directed.

Supply and fix 25mm bore steel water tubing 'medium grade' galvanised, with all fittings laid in trenches complete all as specified and as directed.

Supply and fix 40mm bore steel water tubing 'medium grade' galvanised, with all fittings laid in trenches complete all as specified and as directed.

Supply and fix 50mm bore steel water tubing 'medium grade' galvanised, with all fittings laid in trenches complete all as specified and as directed.

Supply and fix 80mm bore steel water tubing 'medium grade' galvanised, with all fittings laid in trenches complete all as specified and as directed.

Supply and fix in repair for 20mm bore dia gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, ISI marked complete all as specified and as directed.

Supply and fix in repair for 25mm bore dia gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, ISI marked complete all as specified and as directed.

Supply and fix in repair for 40mm bore dia gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, ISI marked complete all as specified and as directed.

Supply and fix in repair for 50mm bore dia gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, ISI marked complete all as specified and as directed.

Supply and fix for 15mm size PVC connection 450mm long including PTMT nuts etc complete all as specified and as directed

Supply and fix for 20mm size brass float valve, high pressure, with polythene float and flynut and connected fittings including dismantling existing tank complete all as specified and as directed.

Material and labour for DI connecting pieces one end flanged and other end socket or spigot and bell mouth pieces one end flanged other end tapering as bell mouth, DI/ CI Bends, tapers, Tees, pieces, Y junction (Single or double branch), cross, collars, caps, plugs, etc, any type and angle/ radius and straight for DI Pipe upto 150 mm bore complete all as specified and as directed.

Supply and fix for 80mm dia cast iron sluice valve with stainless steel spindle and cast iron hand wheel complying with IS:14846-2000, class PN 1.6 both ends flanged with 2 Nos rubber insertion gasket joints, nuts, bolts & washers of required size & Nos complete all as specified and as directed.

Material and Labour for cutting existing road/ hard standing for taking out pipe/ making new connection and making good with PCC (1:2:4) type B-1 (using 20 mm graded broken stone aggregate) surface finished even and fair complete all as specified and as directed.

Material and labour for construction of brick masonry valve pit, with one brick thick wall using old size fly ash bricks in cement mortar (1:4) on 100mm thick PCC (1:4:8) type D2 (40mm graded broken stone aggregate) in foundation, rendering 15mm thick in CM (1:4) internally and externally upto 150mm below GL, providing 3.0mm thick MS sheet valve pit cover, welded with 40X5mm flat iron frame alround including provision of hinges, handle and locking arrangement and 40 x 40 x 6mm angle iron frame fixed on top of valve pit by means of holdfast 150mm long, embedded in PCC 1:2:4 type B1 (20mm graded broken stone aggregate) block of size 230 x 200 x 100 mm, applying two coats of anti-corrosive paint over a coat of red oxide zinc chrome primer after preparation of all exposed to steel surfaces including necessary earth work in soft/ loose soil, of size 600mm X 600mm X 600mm (internal dimension) complete all as specified and as directed.

All as per serial item No.84 here-in-before but of size 900mm x 900mm x 900mm.

Supply and fix for KWH energy meter temper proof electronic type of capacity 5 to 30 Amps single phase two wire, 240 Volts, LCD display with identity of parameters indication for power ON, current reversal, ELT LED pulse out put for kwh on front panel, class 1.0 for active energy as per IS 13779/ IEC62053-21 with optical port including necessary electrical connections with 2 runs of 6 Sqmm PVC FRLS cable from meter to in coming and out going MCB SPs with proper copper lugs with sealing arrangements complete all as specified and as directed. Note : Quoted Rate is deemed to inclusive of Stickering/Marking/ writing of Quarter numbers in concerned meters as directed by Engr-in-Charge.

Supply, installing, testing and commissioning of self contained drinking water cooler of above 3 star rating, partially stainless steel body working with non CFC refrigerent, electric driven, single phase, 50 HZ, 230 volts AC supply, having approx storage capacity/ nominal cooling capacity of 60 /120 litre, ISI marked, full width single sheet mounted drain tray, hermetically sealed compressor of high efficiency with and including PCC 1:2:4 type B1 platform of suitable size complete all as specified and as directed.

Supply, installation, testing and commissioning of 3 phase, AC 415 volt, 50 hz, 5 HP, 3000 RPM horizontal type open well submersible water pump set, electric motor driven, having discharge 42000 litres per Hour at 30 metres head, including non return valve 01 No. all as per IS: 8034 of 1989 complete all as specified and directed. Make: Crompton Greaves/ KIRLOSKAR/ Jyothi/ KSB

Material and labour for submersible cable with multistranded copper conductor of size 6.0 Sq. mm 3 core with necessary water proof electrical connections at motor terminal complete all as specified and as directed.

Supply and fix, installation of 3 KVA voltage stabilizer for automatic operation with copper wound coil, single phase naturally air cooled indoor type wall mounted with electronic time delay relay, designed for input variation between 170 volt to 250 volts with out put voltage at 230 volt with accuracy of + 2.5% suitable for above water cooler complete all as specified and as directed.

Supply and fix, installation of 5 KVA voltage stabilizer for automatic operation with copper wound coil, single phase naturally air cooled indoor type wall mounted with electronic time delay relay, designed for input variation between 170 volt to 250 volts with out put voltage at 230 volt with accuracy of + 2.5% suitable for above water cooler complete all as specified and as directed.

Supply,installing, testing and commissioning outdoor type LT panel of suitable size, CPRI approved factory made totally enclosed, dust and vermin proof, double leaf shutter in front and rear side made of 3.15 mm thick CRCA sheet, duly fabricated and having proper locking arrangement in both front and rear door and painted with powder coating paint and suitable for 500 volts, 50 Hz, 3 phase 4 wire internal wiring system and comprising with and including following accessories and mounted on PCC plat form of 100mm thick in PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate), 1.0 metre all round the panel complete including taking down existing panel at 41 Arty Div Near Office Area panel:- (a) 600 Amps rated copper bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite/DMC insulator bus bar support (Square/round ) insulators of suitable size and good insulation resistance. (Contd....)

Supply and laying 40mm outer dia, double walled corrugated (DWC) HDPE duct pipe conforming to IS- 14930 Pt-II with antirodent and non flame propogating properties of approved colour complete with fittings for cable protection complete all as specified and as directed.

All as per item No. 93 here-in-before but 50mm outer dia.

All as per item No. 93 here-in-before but 63mm outer dia.

All as per item No. 93 here-in-before but 77mm outer dia.

Supply and laying for 80mm bore GI tubing light grade laid in trenches as in protection of UG cable at road crossing/ hard standing as per site requirement including taking down existing pipe complete all as specified and as directed.

Supply and laying for 50mm bore GI tubing light grade laid in trenches as in protection of UG cable at road crossing/ hard standing as per site requirement including taking down existing pipe complete all as specified and as directed.

Supply and laying for 32mm bore GI tubing light grade laid in trenches as in protection of UG cable at road crossing/ hard standing as per site requirement including taking down existing pipe complete all as specified and as directed.

Supply, laying and testing for LT XLPE UG cable insulated screened PVC bedded galvanised steel strip or wire armoured, heavy duty electric power cables with stranded aluminium conductor with cable glands, lugs etc laid in trenches, fixed on wall/ pole including brass cable glands, clamps etc. and taking out of existing unserviceable cable and making good damaged surfaces as required of size 10 Sqmm 2 core cable complete all as specified and as directed. Note for item 100 to 15: Excavation and earth work shall be measured and paid separately.

All as per serial item No.100.00 here-in-before but for 10 Sqmm 4 core cable.

All as per serial item No.100.00 here-in-before but for 16 Sqmm 4 core cable.

All as per serial item No.100.00 here-in-before but for 25 Sqmm 4 core cable.

All as per serial item No.100.00 here-in-before but for 50 Sqmm 3.5 core cable.

All as per serial item No.100.00 here-in-before but for 120 Sqmm 3.5 core cable.

All as per serial item No.100.00 here-in-before but for 150 Sqmm 3.5 core cable.

Supply,installing, testing and commissioning outdoor type LT panel of suitable size, CPRI approved factory made totally enclosed, dust and vermin proof, double leaf shutter in front and rear side made of 3.15 mm thick CRCA sheet, duly fabricated and having proper locking arrangement in both front and rear door and painted with powder coating paint and suitable for 500 volts, 50 Hz, 3 phase 4 wire internal wiring system and comprising with and including following accessories and mounted on PCC plat form of 100mm thick in PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate), 1.0 metre all round the panel complete including taking down existing panel at 41 Arty Div near Cook House :- (a) 500 Amps rated copper bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite/DMC insulator bus bar support (Square/round ) insulators of suitable size and good insulation resistance. (Contd....)

Supply, Installation and commissioning of wall mounting air cooled split type unit air conditioner electric driven single phase indoor unit and outdoor unit with cordless remote control unit and with in built airioniser and plasma filter for better indoor air quality cutting, brazing and connecting the copper pipe of size 1/2 inch and 1/4 inch size of pipe and making holes as for passing of copper pipes and electric cables and pressure testing with nitrogen and freon gas vacumising the system and charging the Non CFC refrigerent and testing the complete system for smooth functioning of split AC up to satisfaction, more than three star rating, confirming to IS-1391 Para II 1992 herimatically sealed air compressor working with Non CFC refrigerent suitable for wall mounting 6000 K cal/ hrs, 1.5 Ton capacity complete all as specified and directed.

Note: 1. Rerformance security:- Refer Condition 22 of Special Conditions 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

GANESH ELECTRICALS AND AIR CONDITIONERS

PROLINK COMPUTERS

K.K.Enterprises

M/S DHEER ENGINEERING