Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹5.4 LAccepted-AOC | 1 | Accepted-AOC BEING LOWEST | |
| 2 | 2₹6.1 L+₹48,995.79 (8.77%)Rejected-Finance | 2 | Rejected-Finance Being Not Lowest | |
| 3 | 3₹6.8 L+₹1.2 L (21.1%)Rejected-Finance | 3 | Rejected-Finance Being Not Lowest |
Tender Value
₹6.6 L
EMD Value
₹13,500
Closing Date
23 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE(I) Fatehgarh
AGE(I) Fatehgarh
SPL REPAIR TO BLDG No. P-09 AND P-14 AT MH, FATEHGARH
2022_MES_559795_1
AGE(I)/FAT/ET-27 OF 2022-2023
Open Tender
Miscellaneous Works
Item Rate
180 days
AGE (I) Fatehgarh
PLEASE REFER TO TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
Yes
AGE (I) Fatehgarh
₹13,500
Yes
22 Dec 2022
26 Oct 2022
29 Nov 2022
26 Oct 2022
23 Nov 2022
10 Nov 2022
26 Oct 2022 - 9 Nov 2022
Amount
Demolition of cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.
M & L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in coping & benching complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm each not exc 4.00 sqm each complete all as specified and directed.
Taking down shutter of any description exc 1.00 Sqm but n.exc 2.00 Sqm complete all as specified and directed.
M&L for MS work as in Framed work as in chowkhats of doors or gates,cooler stand of angle or other section with gusset plates, rails, braces, etc.,conforming to Fe.290.Gde-E-165 complete all as specified and directed.
M&L for MS work 0.63 mm Mild steel, plain, black sheet as in steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc.
M&L for MS work as in Framed work as in Framed work as in doors or gates of angle or other sectionwith gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 410-W(Gde E- 250) quality A complete, all as directed
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or welded complete all as specified and directed.
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars,dovetailed or welded complete all as specified and directed.
S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified
S&F Factory made 35mm thick 2nd class H/wood plain framed panel shutters (Two panel) with lock rail and panel of 9mm or 12mm B.W.P Commercial ply. The size of rail and style as per IS : 1003 (Part I), Kiln seasoned and chemically pressure treated etc complete all as specified and directed.
S&F Factory made 35 mm thick 2nd class hardwood as in Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.
S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm palin colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing specified in SSR
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S Frame shall be covered with heat moulded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock and bottom rail on either side & as gap insert for tip rail & bottorm rails; Panelling of plain colour PVC sheet to be fitted in the MS frame weloded/seated to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement. suppling and fixing in the frame at site as per specification & drawing specified in SSR
S&F Aluminium anodised barrel tower bolts of extruded section of 125mm size etc complete all as specified and directed.
S&F Aluminium handles, cast type anodised of size 125mm etc complete all as specified and directed.
S & F mild steel sliding door bolt 300mm long clip type, stove enamelled black with bright bolt not less than 16mm dia complete all as specified and directed..
S & F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, wodden beads to steel windows/wodden doors complete all as specified and directed.
S & F 3 mm thick sheet glass, ordinary quality and glazing with mitred beads or oil putty including glazing clips in square not exc 0.50 sqm in each pane complete all as specified and directed.
M&L Preparing surfaces new of steel and applying two coats of synthetic enamel paint, complete all as specified and as directed.
M&L Preparing surfaces new of steel and applying two coats of synthetic enamel paint, over a coat of primer complete all as specified and as directed.
M&L preparing surfaces new of wood and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.
Taking down cement plaster on brick wall or stone wall etc. including raking out joints hacking for key, scrubbing down with water etc and disposed off unserviceable material of out side MD land complete all as specified and directed..
Demolition of brickwork masonary built in lime or cement mortar including all quiens arches, pillars etc. But including concrete articles complete all as specified and directed.
M & L Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cm (1:6) complete all as specified and directed.
-ditto- all as per above but except Bricks etc complete all as specified and directed.
M&L for Brick work with sub class "B" bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.
M & L Rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement complete all as specified and directed.
M & L Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement complete all as specified and directed.
M & L for preparation of new plastered surfaces of walls and applying two coats of OBD over a coat of chalk whitening complete all as specified and directed..
M & L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.
M & L for preparation of old plastered surfaces of walls by rubbing down and making surface smooth and applying two coats of OBD over a coat of 1mm thick wall putty complete all as directed.
M & L for preparation of old plastered surfaces of walls by rubbing down and making surface smooth and applying two coats of cement base paint complete all as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as directed.
Demolition of PCC in Ground floors/PCC Path/Plinth Protection and paving n.exc 15cm thickness (below or above ground level) etc complete all as specified and directed.
M & L Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer of cement (1:6) complete all as specified and directed..
M & L Glazed ceramic tiles in vertical surface 300x 450x 7 mm set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick screed bed or bedding layer of cement (1:6) complete all as specified and directed..
M&L for 18-20 mm th Granite (of any type) work (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over 15 mm th screed in CM 1:6 complete all as specified and directed.
M & L for providing prepolished chequered cement concrete tiles of size 30cm x 30cm x 25mm thick set & jointed in neat cement slurry with grey cement and pigment including 15mm thick screed bed or bedding layer of cement mortar (1:6) for laying of chequered tile complete all as specified and directed..
M & L 50 mm thick PCC 1:3:6 type C-2 using 40mm graded aggregateds as in plinth protection complete all as specified and directed.
Dismantaling of asbestos cement (Corrugated, semi corrugated etc) sheetiting in roof covering complete all as specified and directed.
Dismantling framed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.
S & F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S & F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in ridge, roof covering/cladding to wall, fixed with self tapping screws as specified and directed.
S & F for Rolled sections as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-W (Gde E-250) quality B complete all as specified and directed.
S&F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed up, capacity in 500 Ltrs, hoisted and fixed in position with all fittings and fixtures including float valve 20 mm bore in position complete all as specified in SSR Part-I complete all as specified and directed.
Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.
S&F False Ceiling Horizontal level regular edge grid 600 x600 mm from work using hot dip sections and fixing tiles vinyl laminated MPL gypsum panels size 595x595x6 to 8mm thick after lamination, suspended the grid with grid hangers to Roof Truss / RCC Slab all as per manufactured instruction complete all as specified and directed.
S&F in repair Vitreous China Wash Basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets , 32 mm PVC waste pipe, 32 mm PTMT Waste coupling and 15 mm dia Pillar taps fancy type chromium plated complete all as specified and directed
S&F in repair Vitreous China Wash down water closet pedestal patteren white with platic seat cover including Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook complete all as specified and as directed .
S&F in repair Low Level Flushing System PVC valveless syphonic action type, 10 ltrs capacity white, with inlet, ball float and handle including brackets complete all as specified and directed.
S&F in repair Steel Tubes Medium Grade Bore of tube in 15mm galavanised with all fitting laid in walls, ceiling or laid in floors etc complete all as specified and directed.
S&F in repair Steel Tubes Medium Grade Bore of tube in 20 mm galavanised with all fitting laid in walls, ceiling or laid in floors etc complete all as specified and directed.
S&F in repair 15mm bore Chromium plated Bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repair 15 mm bore ,Stop valves, cast copper alloy,screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed fancytype, chromium plated with long shank and cup(concealed type)complete all as specified and directed.
S&F in repair 15 mm bore ,Stop valves, cast copper alloy,screwed down, high pressure, with crutch or butterfly handle,screwed both/one ends for iron pipe or for unions and fixed fancy type, chromium plated complete all as specified and directed.
S&F PVC connection 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed.
S & F in repairs brass chromium plated showe rose 125mm size with shower arm complete all as specified an directed .
S & F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F in repair PTMT grating doom 100mm dia with or without waste hole etc complete all as specified and directed.
S & F in repairs Stainless steel kitchen plate rack 900 x 600 and made out of 1 mm thick stainless steel sheet complete all as specified and directed.
S & F in repair curtain rod PVC coated anodised aluminium alloy rod 25 mm bore with fixing fancy type brackets, stops, rollers, side dooms etc complete all as specified and directed.
Taking down copper/aluminium point wiring of any discrapation and any position (light, fan, socket or power point) complete, including fixture and fittings such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified.
Taking down Aluminium sub main wiring and making good disturbed surfaces to match with the existing surface roof/wall/floor complete all as specified and as directed
M&L for point wiring light/fan/exhaust fan point controlled by one switch with 1100 volt grade PVC insulated and unsheathed 1.5 Sq mm (FRLS) multistranded copper conductor cable with continuous earth wire of 1.5 Sq mm (FRLS) multistranded copper conductor cable PVC insulated and unsheathed, drawn in & including concealed PVC rigid conduit medium grade with fittings (ISI marked) not less than 20 mm dia & 1.6 mm thick sunken pressed steel galvanised terminal boxes with top cover ISI marked plastic laminated hylam sheet for housing/ fixing switches etc complete all as specified and directed for the following- Note- (i) The quoted rete is deemed to be included for the chases cutting. (ii) Cutting chases for concealed shall be made good using CM 1:4 and surface finished to match the existing surface & colour.
…ditto as above but for 5 pin 5 Amp switch socket combination point on an independent board….ditto ..…
…ditto as above but for 5 pin 5 Amp switch socket point controlled by one switch on same board…ditto …..
….ditto as above but for bell point controlled by one bell push switch….ditto…..
….ditto as above but for one 15 Amp 6 Pin switch socket combination independent with 4 Sqmm FRLS unsheathed copper conductor single core multistranded ….ditto ….
S&F switch piano flush type 5 Amp single pole one way complete all as specified and as directed
S&F switch socket combination 2 in 1 flush type 5 Amp 5 Pin complete all as specified and as directed
S&F switch socket combination 5 in 1, 5/15 Amp flush type complete all as specified and as directed
Supply and fixing bell push ac 230 volts complete all as specified and as directed
Supply and fix Call bell ding dong ac 230 volts complete all as specified and as directed
M & L lamp holder PVC/Polycarbonate type insulated body with back plate angle type for batten fittings incl LED lamp of 9W and colour temp 6500K suitable to fix in angle hoder complete all as specified & directed.
Supply and fix electronic fan regulator 5 stepped type complete all as specified and directed
S&F ceiling rose PVC/Poly carbonate isolated body three terminal AC 230 volts complete all as specified and directed.
M&L for sub main wiring with two single core 6 Sqmm FRLS copper conductor PVC insulated and unsheathed cable including PVC conduit medium grade (appropriate size) concealed in wall for sub main connection including 4 Sqmm FRLS insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified. ( Note :- Two runs of 6 sqmm FRLS and one run of 6 sqmm FRLS copper conductor shall be measured as one unit length.)
Supply and fixing in replacement MCB distribution board SPN 240 Volt 8 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection with copper thimbles as required complete all as specified.
S&F in replacement of MCB SPN 16-40 Amp 240 volt 'C' curve complete all as specifed and directed.
S&F MCB in replacement of MCB SP 6 to 32 Amp 240 Volt 'C' curve 10 KA complete all as specified and directed.
S&F surface and wall mounted 18/20W LED decorative box type with driver, holder including LED tube light fiitting with complete connection as required complete all as specified.
S&F LED wall light 12 W unbreakable poly carbonate suitable for mounting on wall /surface complete all as specified and directed.
S&F in replacement of surface and wall mounted LED 10W extruded aluminium batten fitting with rod complete.
S&F building security LED light 14 watt with IP-65 including suitable size of GI bracket and fixing accessoreis complete all as specified and directed.
M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick, burried directly into the ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI earth wire 4 mm dia by means of bolts, nuts, check nuts, and washers of galvanised iron or steel all as shown iln electrical plate No - 3 connected to earthing test point all as specified or indicated including excavation and connected earth work, PCC chamber and cover, watering pipe, funnel wire mesh but without earth lead protection pipe and test on completion after dismantling unserviceable erthing (above GL only) complete all as directed incl dismantling of exsisting earthing. ( Note :- On testing after completion if desired earth resistence is not obtained, the earthing will be re-done at no extra cost.)
M/S S P CONSTRUCTION
kpenterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .