SPL REPAIR OF 01 X WASH ROOM AND 04 X LATRINE OF ILP LOC EX 59 ENGR REGT AND SPL REPAIR TO BLDG NO P-156 AND P160 OF 953 (I) TK TPTR PI ASC UNDER AGE B/R-IV AND UNDER AGE E/M-II OF GE (SOUTH) MEERUT CANTT

Amount

Supply & fix steel windows or ventilators fixed type, complete all as specified & directed.

Hacking out old broken glass ( any thickness, size, quality or discription) from metal/wooden frames fixed with pin, beading or oil putty complete all as specified & directed.

S&F 3 mm thick, plain sheet glass ordinary quality and glazing with oil pane putty in squares not exceeding 0.5 Sq. m in each pane complete all as specified & directed.

S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples, complete all as specified & directed.

M&L 75 mm thick PCC 1:3:6 type C1 (20 mm graded stone aggs) as in plinth protection, path including finished surfaces even and smooth without using extra cement complete all as specified & directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified.

Material and labour for brick work with fly ash bricks of straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.

All as per ser No 7.00 here-in-before but except fly ash bricks complete all as specified & directed.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed.

M&L for Rendering 15 mm thick in cement mortar (1:4) on bricks or concrete surface, finished even and smooth without using extra cement complete all as specified & directed.

M&L for preparation of newly plastered surface of wall etc and applying birla/JK wall putty and two coat of oil bound distemper (OBD) over and including one coat of primer complete all as specified & directed.

M&L for preparation of newly plastered surface of wall etc and applying 1mm thick wall care putty and after applying two coats of Cement base paint over and including a coat of alkali resistence primer in any colour complete all as specified & directed.

Material & labour Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick cement screed bed of CM (1:6) over & including dismantling of old tiles complete all as specified & directed.

Material & labour for Glazed ceramic tiles in vertical surfaces 350x250mmx7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with existing work over and including 10mm thick rendering in CM 1:4 including dismantling of old tiles complete all as specified & directed.

S & F Solid PVC Door frame of size 50mm x 47mm made out of 5mm PVC sheet reinforced suitable for solid PVC door suppling & fixing in opening, complete all as specified & directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S&F 250mm size Mild steel sliding door bolts,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified & directed.

S&F Stainless steel butt hinges 100 mm in size heavy weight, cold rolled mild steel, fixed with screws or with welding to existing frames, ISI marked, complete all as specified & directed.

S&F barrel tower bolts 200mm of aluminium, anodized extruded section and fixed, 200 mm long, dia of bolt not less than 12 mm, ISI marked, complete as specified and directed.

S&F Bow handle aluminium anodized of size 150 mm, ISI marked, complete all as specified and directed.

Taking down chowkhats or frame exceeding 1.5 Sq. m but not exceeding 4 Sq. m each with shutters without taking off shutters from the frame, complete all as specified & directed.

Taking down wooden chowkhats or frame not exceeding 1.5 Sqm each with shutter(s) (without taking off shutters from the frame), complete all as specified & directed.

S&F in repair Glass Corner Shelf fitted in wall with screws complete all as specified and directed

Supply & fix 15 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including Taking up or down GI steel tubing, testing complete all as specified & directed.

Supply, fix 20mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including Taking up or down GI steel tubing, testing complete all as specified & directed.

Supply and fix in repair PVC Pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 75mm bore as in waste and rain water pipes complete all as specified & directed.

Supply and fix in repair PVC Pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 110 mm bore including bend, tee etc or other fittings as requiredas in waste and rain water pipes complete all as specified & directed.

S&F in repair PVC vent Cowl 110 mm complete all as specified and directed.

S&F in repair 15mm bore pillar tap, long shank, swan neck, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts complete all as specified & directed.

S&F in repair 15 mm bore bib tap long body chromium plated, cast copper alloy, with crutch or butterfly handle, flange, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repair chromium plated Angle stop valve incl flange, any description, suitable for 15 mm bore pipe complete all as specified & directed.

S&F in repair vitreous china squatting pan Orissa pattern, size 580 x 440mm, white, with integral footrest, including flushing cistern & flush pipe fixed as in repair with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified & directed.

Supply and fixing in repair PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor. complete all as specified & directed.

S&F in repair Vitreous China wash basin, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified & directed.

Supply & fix in repairs chromium plated shower roses with swivel joints of 75mm size complete all as specified & directed.

Supply & fix in repairs PVC connections of 450mm long Make suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Supply and fix in repairs PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

S&F in repair CP towel rail brass 20mm dia 600mm long CP finish complete all as specified & directed.

Supply & fixing in rotational moulded polyethylene water storage tanks 1000 liters capacity, three layered (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including 20 mmbore PTMT float valve with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 140gms), including dismantling existing water tanks complete all as specified & directed.

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 15 mm dia complete all as specified & directed.

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia complete all as specified & directed.

S&F 15 mm bore concealed stop cock, chromium plated, cast copper alloy, screwed down with crutch or butterfly handle screwed both ends, as in repair including flench complete all as specified & directed.

S&F in repair Fency type CP brass soap dish complete all as specified & directed.

S&F in repair PTMT shelf 450 mm x 124 mm any colour with brass chromium plated screws & PVC rawl plugs (Minimum weight 300 gm) complete all as specified & directed.

M&L in repair PVC SWR floor trap, with grating including joining to waste pipe fixed in cement concrete type B-1 (1:2:4) 100 mm dia Complete all as specified and directed.

Taking down cement plaster on top of roof slabs, RCC chajja, and projection etc including raking out joints, hacking for key scrubbing down with water etc and including removing & taking out of roof treatment membrane etc if any complete all as specified & directed.

M&L for providing PCC 1:2:4 type B-1 (using 20m graded crushed stone aggregate) as in roof padding, roof kerbs or mud stops, rounded or chamfered etc finished fair and even without using extra cement, complete all as specified and directed.

M&L screed bed 15 mm thick as on roof surface including flashings and junction of parapets etc., finished even and smooth in cement mortar (1:4), using water proofing compound @200ml per 50 Kg of cement consumed or as per manufacterers instruction, after brushing cement slurry complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified & directed.

M&L for cleaning of plastered surface and applying priming coat using bituminous primer @ 0.30 Kg/Sqm followed by evenly a tack coat @ 12 Kg/Sqm using with 85/25 grade bitumen, over laid with 3mm thick APP modified polymeric water proofing membrane with non woven polyster reinforced of weight not less than 3 Kg/Sqm unrolled and bonded to substance with side and end laps 75mm and 100mm as per manufacturer's instructions and complete top of APP water proofing polymeric membrane with a coat of hot blown industrial bitumen 85/25 grade @ 1.2 Kg/Sqm and finally finished with a coat of bituminous aluminum paint @ 0.20 Kg/Sqm complete all as specified and dircted.

S&F factory made pressed steel frames, conforming to IS, having profile 105 mm x 60 mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate, & including PCC 1:4:8 back filling in frame complete all as specified and dircted.

M&L for preparation of new or previously untreated wooden surface of any description, not otherwise described over 10 cm width or girth and apply two coat of synthetic enamel paint over over a coat of pink primer complete all as specified and directed.

Supply & fix in repairs second class hardwood (SAL) as in plain solid straight chowkats or frames, wrought, rafter, purlins and like truss work etc framed together with glue pinned at joints, with single or double rebates or as in perlins, rafters etc complete all as specified and directed.

Dismantling of Asbestos cement / Fiber (corrugated,semicorrugated, etc.) sheet any description as in roof covering incl ridge and removing from sitecomplete all as specified & directed.

M&L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding / ridges, fixed with self tapping screws complete all as specified & directed.

S & F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified & directed.

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified & directed.

M&L applying three coats of white wash on new Ceiling surface including preparation of surface complete all as specified & directed.

M&L for complete removal of existing treatment and finishing of wall surface by using 1mm thick wall care putty and applying two coats of cement base paints over a coat of primer in any colour complete all as specified & directed.

M&L for complete removal of existing treatment and finishing of wall surface by using 1mm thick wall care putty and applying two coats of oil bound distemper (OBD) over a coat of primer in any colour complete all as specified & directed.

S&F 2nd class hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified & directed.

S&F factory made pressed steel frames, conforming to IS, having profile 125 mm x 60 mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate, etc, complete, as specified, supplied and fixed complete all as specified & directed.

M&L applying two coats of exterior emulson paint (weather proof) using Apex(Ultima) one coat of putty as per requirement after finishing the wall surfaces and complete all as specified & directed.

M&L for Rendering 15 mm thick in cement mortar (1:6) on bricks or concrete surface, finished even and smooth without using extra cement complete all as specified & directed.

Taking down carefully any type of battens or conduit point wiring with or except conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site complete all as specified & directed.

Material & labour for point wiring with FRLS PVC insulated 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, unsheathed copper conductor cable in and including PVC concealed conduit of size 20mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting / chases etc in walls, with 3mm thick plastic laminated sheet cover including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for one Tube light/bulb/street light point controlled by one, one way switch 05 / 06 Amps.

All as per item No 68.00 here-in-before but One ceiling fan point controlled by one, one way switch 05 / 06 Amps.

All as per item No 68.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as per item No 68.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board.

Supply & fixing switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed.

Supply & fixing socket outlet 3 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed.

Supply & fixing switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed.

Supply & fixing of socket outlet 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed. .

Supply and fix in repair decorative LED Batten 20 Watt polycarbonate housing integtrated type complete with all accessories and fixing material all as specified and directed.

Supply and fixing in repair lamp holder , PVC / polycarbonate type back plate suitable for batten fitting complete with 1 x LED lamp 10 watt.

Supply and fix in repair decorative LED Batten 10 Watt polycarbonate housing integtrated type complete with all accessories and fixing material all as specified and directed.

Supply & fixing in repair ceiling rose, 3 terminal PVC polycarbonate isolated body complete all as specified & directed.

Material and labour for sub main wiring with 6 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all MS conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note:- One meter of conduit along with 2x6 sq mm wire and one 6sq mm earth shall be measured as one unit length.

Supply and fixing sheet metal enclosure, single pole and neutral AC, 415 volts, 08 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection 'B' Series including provision for four pole isolator/mcb as incomer with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as specified and directed.

Supply & fixing MCB SPN, AC, 240 volts of 40 Amps, C curve, 10 kA, complete all as specified & directed.

Supply and fixing MCB SP, AC, 240 volts of 06 to 40 Amps, C curve, 10 kA, complete all as specified & directed.

Supply and fixing exhaust fan steel body AC single phase 230 V of size 450mm sweep with blade , frame and lauvers complete all as specified & directed.

Supply & fixing industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 20 Amps MCB, single pole, AC, 240 volts complete all as specified & directed.

Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 16 Sqmm 2.0 core armoured, PVC sheathed with aluminium conductor heavy duty complete all as specified & directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.5 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified & directed.

Supply and fixing LED building security light fitting 1x35 Watt luminaries with die cast aluminium housing comprising epoxy poweder coated enclosed with glass cover in frame with high power LED white lamp of capacity 35 watt including making connections complete with bracket fitting made out of GI pipe medium grade including clampsand nuts and bolts complete all as specified & directed.

Rajneesh Jain (BID ID -3119254)

M/S AGARWAL CONSTRUCTION CO. (BID ID -3119109)

SA construction co. (BID ID -3128576)

SHAKTI CONSTRUCTION CO (BID ID -3127284)

Sunil Enterprises (BID ID -3127895)

NK CONSTRUCTION (BID ID -3118530)