Loading…
Loading…
Tender Value
₹4.9 L
EMD Value
₹9,885
Closing Date
9 Sept 2026, 11:00 amClosed
AGM WSD SJPNL Us Club Shimla 171001
AGM WSD SJPNL Us Club Shimla 171001
Providing installation of water Vending Machine at Police Ground Bharari Shimla including Maintenance for a period of one year under Lakkar Bazar Sub division Ridge
2026_SJPNL_142607_1
3614 dated 01/09/2026
Open Tender
Civil Works
Item Rate
90 days
Shimla
Please refer Tender documents.
7 documents required · 7 mandatory
₹350
₹9,885
15 Sept 2026
2 Sept 2026
9 Sept 2026
2 Sept 2026
9 Sept 2026
2 Sept 2026
2 Sept 2026 - 9 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 0.00_) | Excavation in foundation, trenches,etc. in earth work in all kinds of soil such as pick work,jumper work,blasting work, hard blasting and chiselling etc. stacking the excavated soil not more than 3 mtrs.clear from the edge of excavation and then returning the stacked soil in 15cm.layers when required into plinths sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within all leads and lifts. | 6.3 | Cum | - | - |
| 0.00_) | Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1cement: 6sand:12graded stone aggregate 20mm nominal size) in Cement Mortar.1:6. (1cement:6sand) in breast walls and retaining walls complete in all respect as per direction and entire satisfaction of Engineer in charge. | 4.05 | Cum. | - | - |
| 3Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering, strutting, strutting and propping etc. with wooden, battens, and ballies, height of propping and centring below supporting floor to ceiling not exceeding 3 mtrs.and removal of the same for insitu reinforced concrete and plain concrete work in complete in all respect i/c all leads and lifts and to the entire satisfaction of the Engineer-in-charge. | |||||
| 3.01 | Foundation , footing , basis of column etc & mass concrete. | 18.15 | Sqmtr. | - | - |
| 4 | Prov. and laying cement concrete 1:3:6 (1cement:3sand:6graded stone agg.40mm nominal size) and curing complete excluding cost of form work within all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge. a) In foundation and plinth. | 4.35 | Cum | - | - |
| 5 | Prov. and laying heavy duty precast cement concrete inter locking paver blocks vibro compacted up to M-50 grade i/c border or kurb block grey or coloured over sub base of concrete with 25 mm thick averagre thickness of cement mortar 1:4 ( 1 cement : 4 sand ) laid over & jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curring rubbing & polishing complete. ( sub base floor to be paid for separately. ) 60 mm thick block. | 9 | Sqmtr. | - | - |
| 0.00_) | Brick work using common burnt clay building bricks in Foundation and Plinth in cement mortar 1:3 (1 cement : 3 Sand) First class bricks. | - | Cum | - | - |
| 0.00_) | Hirmachi colour wash on undecorated wall surface ( two coats ) to give an even shade i/c throughly brooming the surface to remove all dirt & dust mortor drops and other foreign matter. work using common burnt clay building bricks in Foundation and Plinth in cement mortar 1:3 (1 cement : 3 Sand) First class bricks. | 36 | Sqmtr. | - | - |
| 0.00_) | Steel work welded in built up,sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of red lead paint Steel section 100x50x5mm. | - | Qtl. | - | - |
| 0.00_) | Providing & fixing 0.60 mm thick prepainted steel sheet in roofing with hot dipped matelic zinc coated sheet with top coat of regulmodified polyster ( RNP ) organic coating of 20 microns over 5 microns priming coating to back coat of polyster of 5 microns over 5 microns priming coating i/c fixing with prepainted iron J or L hooks bolts and nuts 6 mm diameter with prepainted limpet & rubber washer complete with all accessories as required as per the direction of Engineer-in-charge. | - | Sqmtr. | - | - |
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.47 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.40 MB
From6.pdf
Tender Documents • 3.42 MB
From8.pdf
Tender Documents • 1.92 MB
NIT.pdf
Tender Documents • 0.39 MB
Tc.pdf
Tender Documents • 0.31 MB
Undertaking.pdf
Tender Documents • 0.04 MB
BOQ_211867.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .