MAINT/REPAIR TO ESSENTIAL B/R SERVICES THROUGH DAY-TO-DAY COMPLAINTS FOR OTM AND JCOS/OR MD ACCN UNDER AGE B/R-II OF GE (SOUTH) DELHI CANTT-10

Amount

Attending complaints of leaking / unserviceable pillar cock, Wall mixer, WHB Mixer, bib taps, two way bib taps, stop valves, 15mm - 20mm dia for making it fully functional and leak proof by carefully including taking down, replacing minor unserviceable parts such as rubber washer, leather washers, jumpers brass 15mm- 20mm size complete all as specified and as directed. Note: New pillar cock, Wall mixer, WHB Mixer, bib taps,two way bib taps, stop valves etc replaced if any shall be measured and paid under respective item of this schedule as S&F.

Notes:- 1. The contractor shall make all arrangement for attending the different types of complaints on every day basis. 2. Contractor shall Provide adequate Plumber with all necessary T&P on all working days from 08:30 AM to 5:00 PM at complaint Cell of AGE B/R-II. 3. A recovery of Rs. 500/- per person shall be recovered from the contractor for non-deploying of Plumber on any working days. 4. The contractor will ensure that the team of Plumber with necessary tools bag shall always remain present at complaint cell to attend the complaints. 5. All the complaint slip, register & other connected documents will be provided and maintained by the contractor without any extra cost. 6. Proper record (date wise) of complaints received & rectified by the contractor and attendance register of tradesman shall be maintained and shall be produced for the verification at the time of payment of each RAR/Bill

Attending complaints of leaking / unserviceable, low level flushing cisterns, PVC or chinaware for making it fully functional and leak proof by replacing the defective parts such as rubber washers,PVC levers, PVC/ CP knobs if required complete all as specified and as directed. Note: New PVC or china ware low level flushing cisterns, replaced if any shall be measured and paid under respective item of this schedule as S&F.

Notes:- 1. The contractor shall make all arrangement for attending the different types of complaints on every day basis. 2. Contractor shall Provide adequate Plumber with all necessary T&P on all working days from 08:30 AM to 5:00 PM at complaint Cell of AGE B/R-II. 3. A recovery of Rs. 500/- per person shall be recovered from the contractor for non-deploying of Plumber on any working days. 4. The contractor will ensure that the team of Plumber with necessary tools bag shall always remain present at complaint cell to attend the complaints. 5. All the complaint slip, register & other connected documents will be provided and maintained by the contractor without any extra cost. 6. Proper record (date wise) of complaints received & rectified by the contractor and attendance register of tradesman shall be maintained and shall be produced for the verification at the time of payment of each RAR/Bill

Attending complaints of internal water supply pipes,fittings and bottle traps for removing of blockages etc of any description incl removing & clearing of air locks etc., by pressure pump or any other means including taking down and refixing of pipes & fittings and replacing old unserviceable pipes and fitting with new ones complete all as specified and as directed. Note: New GI pipes replaced if any shall be measured and paid under respective item of this schedule as S&F. This item includes for labour part only for removal of blockages of air lock etc.

Notes:- 1. The contractor shall make all arrangement for attending the different types of complaints on every day basis. 2. Contractor shall Provide adequate Plumber with all necessary T&P on all working days from 08:30 AM to 5:00 PM at complaint Cell of AGE B/R-II. 3. A recovery of Rs. 500/- per person shall be recovered from the contractor for non-deploying of Plumber on any working days. 4. The contractor will ensure that the team of Plumber with necessary tools bag shall always remain present at complaint cell to attend the complaints. 5. All the complaint slip, register & other connected documents will be provided and maintained by the contractor without any extra cost. 6. Proper record (date wise) of complaints received & rectified by the contractor and attendance register of tradesman shall be maintained and shall be produced for the verification at the time of payment of each RAR/Bill

Attending complaint of repair to easing of Doors/ Window/ Cup Board shutters by tightening of hinges/ handles/ Al-door bolt/ tower bolt/ knobs, hasp and stapple etc of any size/ any number of panels for easy closing/ opening or changing the position of hinges, adjustments of tower bolts, sliding bolts, replacement of looking mirror etc complete including replacement of major defective item if required complete all as specified and as directed. Note: New hinges/ handles/ Al-door bolt/ tower bolt/ knobs, hasp and stapple etc replaced if any shall be measured and paid under respective item of this schedule as S&F.

Notes:- 1. The contractor shall make all arrangement for attending the different types of complaints on every day basis. 2. Contractor shall Provide adequate Carpenter with all necessary T&P on all working days from 08:30 AM to 5:00 PM at complaint Cell of AGE B/R-II. 3. A recovery of Rs. 500/- per person shall be recovered from the contractor for non-deploying of Carpenter on any working days. 4. The contractor will ensure that the team of Carpenter with necessary tools bag shall always remain present at complaint cell to attend the complaints. 5. All the complaint slip, register & other connected documents will be provided and maintained by the contractor without any extra cost. 6. Proper record (date wise) of complaints received & rectified by the contractor and attendance register of tradesman shall be maintained and shall be produced for the verification at the time of payment of each RAR/Bill

Hacking out old broken glass from metal frames including punching or drilling out old glazing pins or spring clips and providing and fixing new ones where ever reqd complete all as specified and as directed.

S&F sheet glass ordinary quality 4.0 mm thick and glazing with oil putty or wooden beads in square not exceeding 0.5 sqm in each pane complete all as specified and as directed.

S&F sheet glass 4 mm thick frosted glass, pin headed type, in square n exc 0.5sqm each pane glazing with oil putty complete all as specified and as directed.

Re-securing glass of any description, thickness, size not exc 0.50 Sqm each pane in existing metal frames glazed with oil putty, incl removal of old putty, replacement of unserviceable glazing pins/ spring clips, securing glass with glazing pins and oil putty complete all as specified and as directed.

S&F in repairs stainless steel wire cloth, 0.63 mm nominal dia or wire and sqm average width or aperture 1.40mm, fixed with tinned tacks or galvanized wire staples to doors/steel windows, complete all as specified and as directed.

Repair to steel Vents/ Doors/ mild steel chowkats or frames/ grills / window & door shutters by replacing unserviceable hinges , handles , peg set etc by way of welding etc as required , oiling to hinges, setting right and easing of shutters to function properly and painting at welded portion to match the existing surfaces all as specified and directed.

Welding in repairss exc 2.5cm but n.exc 5cm in length and metal thickness n.exc 6mm of any description and in any position complete all as specified and as directed. Note: Supply only hinges etc., shall be measured and paid for separately under respective item.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed..

M&L for 18mm thick wood plastic composites (WPC) board,in patches fixed with screws as in cupboard/ wardrobe/ almirah shutter/kitchen cabinet boxes, including PVC beading all around and all necessary fittings and fixtures like nickle plated clip hinges, knobs etc complete all as specified and as directed. Notes: (a) Pattern & design of WPC board to be decided by GE. (b) Items like, magnetic Catcher, cupboard 100mm SS handle, and continuous (piano) hinges,mild steel, bright finish or electrogalvanised , width of flap (when open) is 30mm deemed to be included in the quoted rate.

S&F in repairss 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

S&F in repairs drapery (Curtain) rod 20mm dia pipe stainless steel/ PVC Coated fancy type with matching MS brackets of approved design with and incl one pair of Finale/ End Cups (All as per Sample) as in curtain rods complete all as specified and as directed.

S&F in repairs continuous (Piano) hinges width of flap 40 mm (when open) , mild steel, bright finish or electro galvanised complete all as specified and as directed.

S&F in repairs mild steel 150 mm ordinary rat tail/ Helicle door springs including roller and roller plate complete fixed in repairs steel chowkhats a with necessary flat iron cleat by welding or drilling with necessary nut, bolts etc complete all as specified and as directed.

S&F in repairs mild steel pressed handles 150mm size, oval type, stove enamelled black complete all as specified and as directed.

S&F in repairs aluminium anodized barrel tower bolts 200 mm long of extruded section complete all as specified and as directed.

S&F in repairs aluminium anodized barrel tower bolts 150 mm long of extruded section complete all as specified and as directed.

S&F in repairs aluminium anodized barrel tower bolts 100 mm long of extruded section complete all as specified and as directed.

S&F in repairs aluminium alloy anodized, sliding door bolts 250mm long with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

S&F in repairs extruded aluminium alloy handles, 150mm long fabricated type, anodized complete all as specified and as directed.

S&F in repairs 150mm hasp and staple, safety type, of aluminium anodised hinge fixed with screws complete all as specified and as directed.

S&F in repairs mild steel cold rolled, medium weight but hinges100mm size complete all as specified and as directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 23cm wide with chromium plated bracket guard and railing complete all as specified and as directed.

S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length of cover plate 150.00 mm complete all as specified and as directed.

S&F in repairs buffer stopper (Rubber) fixed with screw in wooden door complete all as specified and as directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. capacity exc 250 litres and not exc 500 litres complete all as specified and as directed.

S&F in repairs PVC waste pipe 32 mm to 40 mm dia size with PVC adopter of length between 60 cm to 120 cm as per site requirement suitable for WHBs / Sinks / urinals etc complete all as specified and as directed.

S&F in repairs CP Waste fitting with long shank suitable for 32 mm dia bore pipe for WHBs / Sinks etc complete all as specified and as directed.

S&F in repairs CP Waste fitting with long shank suitable for 40 mm dia bore pipe for WHBs / Sinks etc complete all as specified and as directed.

S&F in repairs shower rose of 125mm with arm (195mm long with bend of 45 degree with flange) of Brass chromium plated shower rose with any colour for fixing with 15mm pipe complete all as specified and as directed.

S&F in repairs CP grating round or square 125mm dia / size to 140mm dia / size fixed in repairss complete all as specified and as directed.

S&F in repairs bib taps Chromium plated brass/ cast copper alloy fancy type with capstain head, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs bib taps long body Chromium plated brass/ cast copper alloy fancy type with capstain head, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs two way bib taps Chromium plated brass/ cast copper alloy fancy type with capstain head, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs stop cocks Chromium plated brass/ cast copper alloy with capstain head screwed down, screwed both ends for 15mm bore iron pipe or for unions complete all as specified and as directed.

S&F in repairs Gun metal, globe or gate valve with iron wheel head/handle screwed both ends for 20mm bore irone pipe complete all as specified and as directed.

S&F in repairs Gun metal, globe or gate valve with iron wheel head/handle screwed both ends for 25mm bore irone pipe complete all as specified and as directed.

S&F in repairs angle cock with flange, cast copper alloy chromium plated with capstain head, fancy type screwed down high pressure, screwed for 15 mm bore iron pipe or for unions, complete all as specified and as directed.

S&F in repairs nipple suitable for HDPE Water tanks minimum weight 15mm -38grms complete all as specified and as directed.

S&F in repairs basin mixer (center hole) cast copper alloy chromium plated with capstain heads, fancy type screwed down high pressure, with or without letters "Hot or Cold" with long screwed shanks and flynut screwed for 15 mm bore iron pipe or for unions, complete all as specified and as directed.

S&F in repairs stop cock cast copper alloy cast copper alloy, chromium plated, screwed down high pressure, fancy type with long shank and cup (concealed type), screwed both ends for 15mm bore iron pipe or for union complete all as specified and as directed.

S&F in repairs vitreous china wash hand basin white flat back size 550 x 400 mm including PVC waste pipe 32 mm bore and CP Waste coupling with and incl a pair of suitable mild steel brackets, fixed all in repairss, including cutting for or pinning in and making good disturbed portion as reqd complete all as specified and as directed.

S&F in repairs vitreous china squatting pan of Orissa patten size 580 x 440 white, front or back inlet with integral footrest including cast iron 'P' or 'S' trap and connection to trap and to flushing pipe,anti-syphonage pipe, etc, fixed in repairs & making good to floor in cement mortar 1:3 or Cement concrete 1:2:4 complete all as specified and as directed.

S&F in repairs Sink (Kitchen sink) made of Stainless steel 1.00mm thick with plugs, washers and PVC waste pipe & CP Waste 40mm/ 32mm size as approved incl bedding in cement mortar on to dwarf walls or incl fixing cantilever brackets and connecting union to pipe overall size 915 x 460mm with bowl size 410 x 330 x 160mm with drainage board complete all as specified and as directed.

S&F in repairs of stainless steel plate rack, as in repairss, made out of 0.63 mm thick sheet of size 750x600x250mm (appx.), as per standard pattern and design (approved quality) with plugs, screws, washers etc complete all as specified and as directed. Note : Weight of plate rack shall not be less than 5.0kg each.

S&F in repairs vitreous China wash down water closet pan (Pedestal Pattern), white including white plastic seat cover with mild steel CP hinging device, suitable brass CP wash jet with 1.00 to 1.50m long tube incl making connection to inlet flush pipe, & to 'P' or 'S' drain trap, incl supply of long special 'P' or 'S' trap fixed in repairs complete and making good the disturbed portion etc. complete all as specified and as directed.

S&F in repairs PVC valveless, syphonic action type flushing cistern, low level 10 ltr capicity Dual Flush Mechanic incl, PVC flush pipe 32 mm bore and mild steel brackets of angle iron 25 x 25 x 3 mm, oval all length 20 cm with red-oxide primer incl taking down any type of flushing cistern and making good the disturbed surfaces in cement mortar 1:3, complete all as specified and as directed.

S&F in repairs 600 mm long PVC connection with PTMT nuts on both ends for 15mm bore pipes of approved quality complete all as specified and as directed.

S&F in repairs 450 mm long PVC connection with PTMT nuts on both ends for 15mm bore pipes of approved quality complete all as specified and as directed.

S&F in repairs plastic water closer seat, white colour, closed pattern with flat or recessed bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repairs hinging device chromium plated for plastic water closet seat suitable for existing size and design complete all as specified and as directed.

Taking down 15mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specified and as directed.

Taking down 20mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specified and as directed.

Taking down 25mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specified and as directed.

S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed.

S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed.

S&F 25mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed.

Fixing only 15mm bore steel water tubing any grade with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed.

Fixing only 20mm bore steel water tubing any grade with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed.

Fixing only 25mm bore steel water tubing any grade with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed.

S&F in repairs rotational molded polythene water storage tanks (cylinder vertical with closed top) of capacity 500 ltrs, double walled hoisted and fixed in position all as specified in SSR, complete all as specified and as directed.

S&F in repairs CP bottle traps 40mm bore dia complete all as specified and as directed.

S&F in repairs PTMT Jet Spray with 1.5 m long flexible tube suitable for 15mm bore pipe or socket complete all as specified and as directed.

S&F in repairs PTMT Ball valve 20 mm bore high pressure complete with HDPE ball & Aluminium rod (Apoxy coated) complete all as specified and as directed.

S&F in repairs PTMT Ball valve 25 mm bore high pressure complete with HDPE ball & Aluminium rod (Apoxy coated) complete all as specified and as directed.

S&F in repairs brass spindle / phase for 15mm dia CP wall mixer, CP WHB mixer, CP two way bib taps,CP bib cocks/ CP pillar cocks / CP angle cocks etc complete complete all as specified and as directed.

S&F in repairs Brass spindle / phase for 15mm dia CP concealed stop cocks etc complete all as specified and as directed.

S&F in repairs deco door seal bottom brush dust stopper strip aluminium plate with nylon brush for cover the bottom door gaps between 20-25mm including fixing with steel screws etc; complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in patches in vertical surface area of each tile from 0.06 sqm to 0.18 sqm jointed in neat cement slurry and pointed in white or colour cement to match over & incl 10 mm thick rendering in cement mortar 1:4 as screed complete all as specified and as directed.

M&L for Ceramic tiles in patches area of each tile from 0.09 sqm to 0.16 sqm Non-skid joint free in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed / bedding layer in cement mortar 1:6 complete all as specified and as directed.

M&L for joint free non skid coloured ceramic tiles 7 to 8 mm thick( square/rectangular)area of each tile from 0.16sqm to 0.36 sqm as in floor on 15 mm thick in cement mortar 1:6 for laying floor finishes set and jointed in neat cement slurry pointed in white/coloured cement to match the shade of tiles complete all as specified and as directed.

M&L for joint free non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile from 0.16sqm to 0.36 sqm as in skirting/dado on 10 mm thick in cement mortar 1:4 for laying wall finishes set and jointed in neat cement slurry pointed in white/coloured cement to match the shade of tiles complete all as specified & directed.

Taking down chowkats with shutters exceeding 1.5 Sqm each and not exc. 4.00 sqm each (without taking off shutters from the frames) complete all as specified and as directed.

S&F factory made solid PVC chowkhat/ door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet and edges will be painted to match with printed PVC sheet reinforced with 19mm x 19mm MS square tube of 19 gauge including rubber gasket, PVC fastners, screws, brackets, and shown on drawing as per SSR part-II (2020) complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick wood grain printed moulded prelam PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S&F aluminium anodized barrel tower bolts 150 mm long of extruded section fixed in repairss complete all as specified and as directed.

S&F extruded aluminium alloy handles, 150mm long fabricated type, anodized fixed in repairss complete all as specified and as directed.

S&F mild steel cold rolled, medium weight but hinges100mm size complete all as specified and as directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, concrete surface etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for 15 mm thick cement plaster (in patches) area exe 0.50 Sqm but not exceeding 3.00 Sqm CM 1:6 on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15mm thick cement mortar plaster (in patches) area exe 0.50 Sqm but not exceeding 3.00 Sqm on brick or concrete surfaces in cement mortar 1:4 finished even and smooth surface wthout using extra cement on wall complete all as specified and as directed.

M&L for 5mm thick rendering (in patches) area exe 0.50 Sqm but not exceeding 3.00 Sqm cement mortar 1:3 in ceiling on concrete surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for complete removal of existing treatment from internal surfaces of walls or a part thereof (In Patches ), area exe 0.50 Sqm but not exceeding 3.00 Sqm, which is damage due to seepage or any other reason & preparing and levelling the disturbed surfaces by using wall care putty (JK/Birla white) to obtain even and smooth wall surfaces of that portion and using sand paper and than applying two coats of oil bound distemper over a coat of primer, including scaffolding arrangement, trestles, ladders complete all as specified and as directed.

M&L for complete removal of existing treatment from externall surfaces of walls or a part thereof (In Patches), area exe 0.50 Sqm but not exceeding 3.00 Sqm, which is damage due to seepage or any other reason & preparing and levelling the disturbed surfaces by using wall care putty (JK/Birla white) to obtain even and smooth wall surfaces of that portion and using sand paper and than applying two coats of oil bound distemper over a coat of primer, including scaffolding arrangement, trestles, ladders complete all as specified and as directed.

M&L for preparation of newly plasered surfaces (in patches) area exe 0.50 Sqm but not exceeding 3.00 Sqm, of ceiling and applying three coat of white wash, complete all as specified and directed by engineer-in-charge.

S&F in repairs PVC water tank cover of capacity 500 ltr complete all as specified and as directed.

Dismantling of cast iron or reinforced concrete or PVC pipes of any dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed.

S&F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in floors or wall complete all as specified and as directed.

S&F 110mm PVC (SWR) bends type ‘B’ (any radius) complete all as specified and as directed.

S&F 110mm PVC (SWR) Branch pieces, PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed.

Dismantling stone slabs and tiles of any discription or thickness in floors, aprons etc, laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for granite (of any type any colour as directed) work, 18-20 mm thk (table rubbed and polished) in steps,jambs,pillars, window-cills, cooking platforms and like in 20mm thick screed bed cement screed bed 1:6 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for (framed/unframed work) complete all as specified and as directed.

S&F Framed work as in doors chowkhats of MS angle iron or MS hollow square/rectangular any type/size with gusset plates, rails, braces, cooler stand, chajja framed complete, drilled for fixing of door etc. to be prepared for hanging with and including hold fasts and locking arrangement conforming to Fe-290 (Gde-165) complete all as specified and as directed.

S&F PVC handle for low level flushing cistern of any capacity complete all as specified and as directed.

S&F in repairs Flushing kit complete (containing handle, float valve, syphon washer, PVC nut etc complete set) for low level flushing cistern complete all as specified and as directed.

Supply only PVC washer for syphon i.e. of low level flushing cistern of any capacity 15 mm bore complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in window cills,hold fast and similar items with plain fair finishing including chamfers, weathering, throating etc and set in CM 1:4 complete joints to match complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 20mm thick screed bed or bedding layer of mortor 1:6 for laying floor finish complete all as specified and as directed.

M&L for cement concrete Type D2, (1:4:8), using 40mm graded stone aggregate 75mm thick as in sub-base, foundations, filling and mass concrete etc complete all as specified and as directed.

M&L for 60mm thick machine pressed pre-cast concrete interlocking paver block any size and shape confirming to IS 15658-2006, M-35 grade with grey cement and pigment, laid over 40 mm thick sand cushion and including joints filled with sand complete all as specified and as directed.

Cutting of vegetable plant (girth not exceeding 300mm) from roof, terrace, chajjas etc digging out the roots and making good the surface in PCC 1:2:4, type B1, with surfaces finished to match complete including scaffolding etc complete all as specified and as directed.

Notes :- (i) The contract sum shall be after deducting the amount of Credit shown in Sch of Credit of this Tender. (ii) If any item of same description in nature is found to be entered as "double in BOQ" and the bidder quotes different rates against same item, then the rate quoted on lower side shall be applicable and higher rate will not be allowed to be paid in any circumstances. No claim on this account shall be entertained on a later date.

Ex Serviceman Enterprises (BID ID -3282811)

vineet pal (BID ID -3282749)