PROVN OF ANTENNA TOWER AT AF STN GORAKHPUR

Lump sum price worked out by the contractor as per showm on drawing for BUILDING WORKS as listed in Sch ‘A’ Part I.

Lump sum price worked out by the contractor for PATH as listed in Sch 'A' Part II.

Lump sum price worked out by the contractor for FENCING as listed in Sch 'A' Part III.

Lump sum price worked out by the contractor for EXTERNAL ELECTRIC SUPPLY as listed in Sch 'A' Part IV.

Lump sum price worked out by the contractor for EARTHWORK as listed in Sch 'A' Part V.

Price item wise worked out by the Contractor for Schedule `A' Part-vi (rate against Srl No. 7.00 to 10.00 shall be quoted by the Contractor)

Boring holes horizontally under road without damaging the surface of road (minimum 1.0 Metre below the road surface with the help of GI tubing not exc 80 mm bore (dia) for passing UG cable, complete all as specified and as directed. Note: GI Pipe laid will be measured and paid separately under respective item

S&F obstruction aviation LED light type casing made from pressure die costing of aluminium housing with polycarbonate, IP-65 protection, double dome complete all as specified and directed.

M&L for DK Thermoplastic cable junction boxes IP 65 with metric knockouts for cable entry, weather proof for outdoor installation and including glands and with 4 terminals for terminating one incoming and outgoing UG cable of size 10/16 sqmm 3.5/4 core and including 40 mm GI pipe for holding LED light and fixed to the PCC/Steel Poles by means of suitable size of clamps with nut and bolts and all specified and directed.

Supply, Fabrication, installation, testing and commissioning of outdoor type feeder pillar box floor mounted made out from 3.15 mm thick MS sheet (CPRI type tested) with canopy type roof, over all size 0.75 x 0.60 x 0.30 m front operated, two part hinged doors with locking arrangement comprising of aluminium bus bar suitable for 3 phase, 4 wire, 415 volts, 50 Hz, AC supply mounted on suitable bus bar insulators, 100 Amps rating suitably drilled and tapped for bolts with openable two part front and rear shutter with heat strinkable PVC sleeving having RYB-B colour code drilling holes for connection of incoming and outgoing cable, complete powder coated painting, testing and installation on PCC/brick foundation, connection of cable with suitable aluminium lugs all as specified and directed. Note: MCCB will be measured and paid separately.