REPAIR/REPLACEMENT OF INTERNAL WIRING AND CONNECTED ELECTRICAL FITTINGS, FIXTURE ALONGWITH MAINTENANCE OF ALLIED MISC E/M WORKS IN OTM ACCN AND KLP, OFFRS, JCOs AND ORs MD ACCN IN THE AOR OF AGE E/M UNDER GE 864 EWS

Amount

M&L for taking down carefully existing old burnt out / unserviceable aluminium / copper point wiring system any type/ size and any description complete for light, fan,bell,socket, power points etc complete including removing all type of fittings & fixture alongwith it connected fixing accessories such as all switches, sockets, ceiling roses, holder, regulators, bell etc complete and removing all the old materials from the site for to taking as a schedule of credit including making good to disturbed surfaces to match with existing surfaces complete all as specified and directed by EIC .

M&L for making single phasing point wiring system used as copper conductor wire for phase and neutral wiring system the wire made out of PVC insulated FRLS of 1100 Volts grade with having multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) ISI marked drawn through wiring system surface on wall or concealed in wall with the help of heavy duty ISI mark PVC casing capping strip / PVC conduit pipe ISI mark in any lengthy wiring system and along with its all connected fittings accessories including providing of pressed steel terminal sunken boxes or heavy duty PVC box / modular box and modular plates duly fixed it concealed in wall or surface on wall and alongwith providing of back and face top covered plate frame or electro plated plastic laminated sheet for housing / mounting of any type/size switches sockets, regulators etc and including using /drawing of one run of single wire 1.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI marked with multistranded copper conductor wire used as a continuous earth wire for point wiring complete system and including making the good to all disturbed surfaces of wall/ceiling area of new wiring system and to match to it as per the existing surface of wall/ceiling etc for one light point/fan point wiring system controlled by one way switch complete all as specified & directed by EIC

All as per ser item No 2 here-in-before but one 5 Amps socket outlet point wiring system fixed on same board & controlled by one way switch complete.

All as per ser item No 2 here-in-before but one 5 Amps socket outlet point wiring system fixed on independent board & controlled by one way switch complete .

All as per ser item No 2 here-in-before but two 2 way point and controlled by one two way switch point wiring system complete.

All as per ser item No 2 here-in-before but one bell point wiring system fixed on board and controlled by one way bell switch complete.

All as per ser item No 2 here-in-before but using PVC insulated FRLS wire 1100 Volts grade with multistranded copper conductor wire of size 2.5 Sq. mm (Nominal area) ISI Marked for power socket point on indenpent board point wiring system and also providing of 2.5 sqmm PVC insulated FRLS wire 1100 Volts grade ISI Marked with multistranded copper conductor wire used as a continuous earth wire for power point wiring system complete .

All as per ser item No 2 here-in-before but using single runs of PVC insulated FRLS wire ,1100 Volts grade with multistranded copper conductor wire of size 4 Sq.mm (Nominal area) ISI Marked for high power wiring system with fixed on independent board and also providing of 4 sqmm PVC insulated FRLS wire 1100 Volts grade ISI Marked with multistranded copper conductor wire used as continuous earth wire complete.

S&F of switch piano flush type single pole one way 5/6 Amps complete all as specified and directed.

S&F of socket outlet two in one 3/5 pin multi pin type 5/6 Amps complete all as specified and directed.

S&F of switch flush type single pole one way 15/16 Amps complete all as specified and directed.

S&F of socket outlet two in one 5/6 pin multi pin type 15/16 Amps complete all as specified and directed.

S&F of bell push flush type single pole one way 5/6 Amps complete all as specified and directed.

S&F of step type electronic fan regulator flush type with having hum free step alongwith speed control know suitable for single phase complete all as specified and directed.

S&F of modular type switch 5/6 Amps 220 Volts AC,one module complete all as specified and directed.

S&F of modular type socket of 5/6 Amps 220 Volts AC, 3/5 multi pin type with two modular complete all as specified and directed.

S&F of modular type switch of 15/16 Amps 220 Volts AC one module complete all as specified and directed.

S&F of modular type socket of 15/16 Amps 220 Volts AC 5/6 multi pin type with two modular complete all as specified and directed.

S&F of modular type bell push flush type single pole one way complete all as specified and directed.

S&F of bell ding dong type, 220 Volts AC, single pole complete all as specified and directed.

S&F of one/two modular type step type electronic fan regulator with having hum free step alongwith speed control know complete all as specified and directed.

S&F ceiling rose three terminals type made out of polycarbonate, isolated body complete all as specified and directed.

S&F of angular/batten type shape lamp holder with PVC/ Polycarbonate insulated body, alongwith brass adopter and back plate for housing of bulb Including providing of LED rechargeable bulb of capacity 7/9 watt warm/ white colour type complete all as specified and directed .

S&F in repair of LED tube light fitting of 1x 20W/22W 220V AC decorative box type with driver, holder including LED tube light with having energy efficient type use in both warm/white type colour complete including providing of suitable type flate flexible cable for electric connection from ceiling rose to fitting complete and including taking down of old unserviceable fitting all as specified & directed.

S&F of recessed / ceiling concealed mounted flate slim panel /ultra slim square shape with LED luminaire panel type fitting suitable for of size 600 mm x 600 mm of rating capacity in 35W/36 Watt 220 Volts AC recessed type with high efficiency PMMA diffuser soft glare free light with driver, holder & LED lamps complete light fitting set all as per existing fitting type/ size of sample /model and make and suitable used for roof ceiling and required fitting use in both warm/white type colour complete set providing of suitable type of flate flexible two/three core cable and making electric connection complete set including making in additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete and also providing of suitable type of flate flexible two/three core cable and making electric connection and including taking down of old fitting all as specified and directed.

S&F recessed / ceiling concealed mounted flate square slim panel integrated design LED luminaire light panel type light fitting of size/type 1 Foot x 1 Foot of rating capacity in 18 W to 24W decorative type with high performance LEDs and electronic driver and mounting slot with long life energy saving complete light fitting set all as per existing fitting type/ size of sample /model and make and required fitting use in both warm/white type colour set complete set including making in additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete and also providing of suitable type of flate flexible two/three core cable and making electric connection and including taking down of old unserviceable fitting all as specified and directed.

S&F recessed/ceiling concealed mounted down lighter light fitting of round/Square flate shapes decorative type with high efficiency PMMA diffuser soft glare free light with drivers & LED luminaire of rating capacity in 15 Watts to 18 Watts 220 Volts AC complete light fitting set all as per existing fitting type/ size of sample /model and make and including making in cutting or additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete including making in additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete and also providing of suitable type of flate flexible two/three core cable and making electric connection and including taking down of old unserviceable fitting all as specified and directed.

S&F recessed/ceiling concealed mounted down lighter light fitting of round/Square flate shapes decorative type with high efficiency PMMA diffuser soft glare free light with drivers & LED luminaire of rating capacity in 9 Watts to 12 Watts 220 Volts AC complete light fitting set all as per existing fitting type/ size of sample /model and make and including making in cutting or additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete including making in additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete and also providing of suitable type of flate flexible two/three core cable and making electric connection and including taking down of old fitting all as specified and directed.

S&F recessed/ceiling concealed mounted down lighter light fitting use in both warm/white type colour of round/Square flate shapes decorative type with high efficiency PMMA diffuser soft glare free light with drivers & LED luminaire of rating capacity in 5Watts to 7Watts 220 Volts AC complete light fitting set all as per existing fitting type/ size of sample /model and make and including making in cutting or additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete including making in additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete and also providing of suitable type of flate flexible two/three core cable and making electric connection and including taking down of old unserviceable fitting all as specified and directed.

S&F recess mounted fixed LED down light made of extruded aluminium housing and high power LED as a light source with clear diffuser and separate electronic driver. of rating capacity in 9 Watts to 12Watts 220 Volts AC complete light fitting set all as per existing fitting type/ size of sample /model and make and including making in additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting use in both warm/white type colour complete and also providing of suitable type of flate flexible two/three core cable and making electric connection and including taking down of old unserviceable fitting all as specified and directed.

S&F of LED mirror light fitting with high out put diffuser 2 feet long of 10 Watts 220 Volts AC decorative type with driver holder and LED lamp with having energy efficient type use in both warm/white type colour complete light fitting set all as per existing fitting type/ size of sample /model and make and including providing of suitable type flate flexible cable for electric connection from ceiling rose to fitting and making electric connection and including taking down of old unserviceable fitting all as specified and directed.

S&F of surface wall mounted decorative wall bracket light fitting with having stainless steel rust free fixture with white glass diffuser alongwith bulb holder based adaptor suitable used for 7.5W / 9 W LED filament lamp E27 base system including providing of 1N x 9W LED lamp complete light fitting set all as per existing fitting type/ size of sample /model and make and required fitting use in both warm/white type colour complete light fitting set and complete set and including providing of suitable type of flate flexible two/three core cable and making electric connection and including taking down of old unserviceable fitting all as specified and directed.

S&F surface mounted LED decorative type angle adjustable sport light / bed side study lamp light fitting with lamp in matt finish for premium aesthetics with based of suitable rating capacity 7Watts LED complete light fitting set all as per existing fitting type/ size of sample /model and make and required fitting use in both warm/white type colour complete light fitting and including providing of suitable type of flate flexible two/three core cable and making electric connection and including taking down of old unserviceable fitting all as specified and directed.

S&F surface mounted LED bulk head luminaries light fitting of rated capacity 10W including LED lamp & driver suitable used for out door type with dust and water proof with energy efficient use in both warm/white type colour complete and including dully fixed on bldg wall surface including providing of suitable type of flate flexible two/three core cable and making electric connection and including taking down of old unserviceable fitting all as specified and directed.

S&F of sheet metal enclosure duly powder coated with single pole and neural enclosure with having a two pin and earth plug & top and mounting channel alongwith one 01 MCB SP 20 Amps and dully fixed surface on wall or concealed in wall and making all necessary electrical connection including taking down of existing DBs a as required at site or directed complete all as specified and directed

S&F of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangement system suitable of size/type for vertical type distribution board vertical load line type of rating VTPN 4 way type 415 Volts 3 phase AC supply holding system with IP protection rating with ISI marked and having fitted neutral and earth link bus bar and mounting base channels and blanking plates suitable for holding of main MCCB as incomer and out going MCB complete system alongwith providing and mounting in side of DB box of 01 No of MCCB TP160 Amps with breaking rupturing capacity 25 KA and having adjustable setting type and also providing of 12 Nos of MCB SP 63 Amps 10KA 'C' curve type of the same manufacture make as per of distribution board make complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs complete all as specified and directed by EIC.

S&F of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangement system suitable of size/type of distribution board of rating SPN 12 way type 220 Volts AC supply system with IP protection rating with ISI marked and having neutral and earth link bus bar and mounting base channel suitable for holding MCBs incomer and outgoing system complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs complete all as specified and directed by EIC.

All as per ser item No 37 here-in-before but distribution board type & size of rating capacity SPN 8 way system complete all as specified and directed.

All as per ser item No 37 here-in-before but distribution board type & size of rating capacity SPN 4/6 way system complete all as specified and directed.

S&F of MCCB TPN 100 Amps with breaking capacity 16 KA 3 phase 415 volt AC supply system and having adjustable setting type and also making suitable size / type of electric wiring connection including taking down of old unserviceable MCCB complete all as specified.

S&F of MCCB TPN 125 Amps with breaking capacity 16 KA 3 phase 415 Volts AC supply system and having adjustable setting type and also making suitable size / type of electric wiring connection including taking down of old unserviceable MCCB complete all as specified.

S&F of MCCB TPN 160 Amps with breaking capacity 36 KA 3 phase 415 Volts AC supply system and having adjustable setting type and also making suitable size / type of electric wiring connection including taking down of old unserviceable MCCB complete all as specified.

S&F of MCB TPN 63 to100 Amps with breaking capacity 10KA 'C' Curve series, 415 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring connection including taking down of old unserviceable MCB complete all as specified.

S&F of MCB SPN 40 to 63 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring connection including taking down of old unserviceable MCB complete all as specified.

S&F of MCB SP 40 to 63 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring connection including taking down of old unserviceable MCB complete all as specified.

S&F of MCB SP 06 to 32 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring connection including taking down of old unserviceable MCB complete all as specified.

S&F of sub main wiring system with two runs PVC insulated FRLS wire,1100 Volts grade with multistranded copper conductor wire of size 2 Run of 10 Sqmm and 1 Run of 10 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy duty ISI mark PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall including taking down old unservicable sub main wiring system complete and making good all disturbed surfaces match to the existing surface complete all as specified and directed .

All as per ser item 47 here-in-before but wire/cable of size/type single core of 2 run of 6 Sqmm and 1run of 6 Sqmm (Nominal area) ISI Marked complete all as specified and directed.

All as per ser item 47 here-in-before but wire/cable of size/type single core of 2 run of 4 Sqmm and 1run of 4 Sqmm (Nominal area) ISI Marked complete all as specified and directed.

M&L for dismantling and taking out old ceiling fan of size 1200/1400 mm sweep fan burnt out motor any type any sweep and including cutting, cleaning of slots winding of fan motor after re-winding the same fan motor assembly with replacing by new super enamelled copper winding wire as per existing wire turn ratio and all as per existing wire gauge/size and also providing of sleeve work, with E class insulation varnish, threading and also replacing of all PVC/MS defected minor parts of fan system and making electric wiring connection complete and refixing the fan complete all as specified and directed.

All as per ser item No. 50 here-in-before, but exhaust fans motor of size 100 mm to 200 mm sweep.

All as per ser item No. 50 here-in-before here-in-before, but exhaust fans motor of size 250 mm to 300 mm sweep.

All as per ser item No. 50 here-in-before here-in-before, but exhaust fans motor of size 400 mm to 600 mm sweep.

All as per ser item No. 50 here-in-before, but exhaust fans motor of size 300 mm to 400 mm sweep.

M&L for taking down of old unserviceable air circulation ventilation fan of size 250 mm sweep single phase 220 Volts AC and renewal with by all new one of body and it all connected fixing accessories of system like outer body frame cover including back and face cover with holding support channel made out of high quality PVC body framing work along with louvers, and shutter, fan motor assembly with shaft and blade and it all connected fixing accessories of system and after renewal of new body parts refixing/ hanging the on same place of wall with the help of nut ,bolt etc complete including providing of suitable type flat flexible cable and making electric connection, complete all as specified and directed

M&L for taking down of old unserviceable electric water storage heating system of capacity 25 ltrs and renewal by all new one of body parts and it all connected fixing accessories of system like out of PVC /mild steel outer body with back and top plate framing work alongwith hot water inner tank and glass wool insulation materials with geyser heating assembly with base support MS plate washer and nut bolt & heating elements up to 2KW lamp, controller setting knob, flexible cable with top etc of system and after renewal of new body parts refixing/ hanging the on same place of wall with the help of nut ,bolt etc complete including providing of suitable type flate flexible cable and making electric connection complete all as specified and directed

M&L for taking down of old unserviceable electric water storage heating system of capacity 50 ltrs and renewal by all new one of body parts and it all connected fixing accessories of system like out of PVC /mild steel outer body with back and top plate framing work alongwith hot water inner tank and glass wool insulation materials with geyser heating assembly with base support MS plate washer and nut bolt & heating elements up to 2KW lamp, controller setting knob, flexible cable with top etc of system and after renewal of new body parts refixing/ hanging the on same place of wall with the help of nut ,bolt etc complete including providing of suitable type flate flexible cable and making electric connection complete all as specified and directed

S&F in renewal of metallic type fan blade including nut , bolt and crew complete suitable for exhaust fan of size 300 to 600 mm sweep all as specified and directed by Engr-in-Charge.

S&F in renewal of PVC blade type fan blade including nut, bolt and crew complete suitable for exhaust fan of size 100 to 300 mm sweep all as specified and directed by Engr-in-Charge.

S&F in renewal of single phase capacitor AC 220 Volts 50Hz of rated capacity 3.5 to 4 MFD ISI marked and making electric wiring connection complete including taking down /refixing of old capacitor complete all as specified and directed.

S&F in renewal of single phase capacitor AC 220 Volts 50Hz of rated capacity 1.5 to 2.5 MFD ISI marked and making electric wiring connection complete including taking down /refixing of old capacitor complete all as specified and directed.

S&F in renewal of PVC insulated twin core twisted copper flexible cable of size 23/0.0076 and making connection complete all as specified & directed.

M&L for disconnecting of electric wire and water PVC pipe connections and taking down/out of geyser from existing site position for repairing purpose and dismantling/ taking out of inner storage hot water tank, geyser assembly, heating element , glass wool etc from in side the geyser of capacity 25 to 50 litre including removing and cleaning of blockage / depositing the scale, silt, sludge, dirty partials material from the in side of the storage heating tank or assembly area of system by method of descaling with the help of chemical acid or manually or mechanically system and after washing in side of the storage heating tank or geyser assembly ,heating element, thermostat system including tightening ,adjustment, servicing and also rectification the leakage problem of hot tank through hot & cold welding / brazing (gas or electric welding) work system for steel tank / copper tank complete and after repair reassemble and proper filling the glass wool and renewal of defected items in side around the tank and fixing of geyser on same position and testing on load complete all as specified an as directed by EIC.

S&F in renewal heating element of geyser of rating capacity 1.5KW to 2.0 KW alongwith 'O' ring washer made out of copper / brass alloy complete set all as per existing type of sample / shape like a round , triangular square , porcelain type , round with threaded type etc and properly match to the each other as per the existing model & make of item and suitable using for geyser of storage capacity 25 Ltrs to 50 ltrs system including removing of existing old unserviceable item all as specified & directed by EIC.

S&F in renewal of round & square shape indicating lamp red /Green or as per existing sizes sample / type model suitable display for geyser on off indicating system complete all as specified and directed by Engr-in-Charge.

S&F in renewal of geyser inner cold/hot water circulating apparatus syphon unit assembly (Geysers assembly) all as per existing type of sample/size and properly match to the each other as per the existing type model & make of item complete set including duly fixed it inside of existing geyser system and suitable used for geyser capacity 25 Ltrs to 50 Ltrs including renewal of defected rubber jain washer 'o' ring type with nuts and bolts & split gas pin system including removing all electric and water connection along with taking down of geyser from existing site position and dismantling / taking out of old defected geyser assembly complete all as specified and directed by EIC.

S&F in renewal of gun metal vertical type non return valve of size 15 mm dia bore type all as per existing type of sample & size/shape and suitable using for geyser of storage capacity 25 Ltrs to 50 ltrs systems including taking down of existing old unserviceable item all as specified & directed by EIC.

S&F in renewal of geyser storage hot water inner tank suitable for geyser of capacity 25 litre and made out of heavy duty stainless steel sheet metal body system or all as per existing type of sample & shape /size and properly match to the each other as per the existing type model & make of item complete set including duly fixed it inside of existing geyser system and suitable used for geyser capacity 25 ltrs and including renewal of defected rubber jain washer 'o' ring type with nuts and bolts and removing all electric and water connection along with taking down of geyser from existing site position and dismantling / taking out of old unserviceable defected geyser tank complete all as specified and directed by Engineer-in-Charge.

All as per ser item No 68 here-in-before but storage hot water inner tank of suitable for geyser of capacity 50 Litre complete all as specified and directed.

S&F in renewal of geyser thermostat large type with having temp adjustable setting made out of copper / brass alloy metal all as per existing type of sample /size and properly match to the each other as per the existing type model & make of item complete and suitable uses for geysers of capacity 25 ltr to 50 Ltrs system complete, including removing of existing old unserviceable item all as specified & directed by EIC

S&F in renewal of single or double square type of geyser auto cut thermostat unit assembly complete all as per existing type of sample /shape /size and properly match to the each other as per the existing type model & make of item complete set and suitable uses for geysers of capacity 25 ltr to 50 Ltrs system all as specified and directed by EIC

S&F in renewal of air release safety valve all as per existing type of sample /size and properly match to the each other as per the existing type model & make of item complete and suitable uses for geyser of capacity 25 ltr to 50 litrs system complete all as specified and directed by Engr-in-Charge.

S&F in renewal of heavy duty PVC braided PVC connection pipe of size 15 mm dia and 450 mm long alongwith two nos of brass nut and nylon washer complete, all as per existing sample type/size complete all as specified and as directed by EIC.

S&F in renewal of heavy duty steel wire braided chromium plated stainless steel metal body connection pipe of size 15 mm dia and 450 mm long alongwith two nos of brass nut and nylon washer all as per existing sample type/size complete all as specified and directed by EIC.

M&L for taking down of old unserviceable ceiling fan of size 1200 mm sweep single phase 220 Volts AC and renewal with by all new one of body frame parts and it all connected fixing accessories of system like fan motor with shaft & rotor assembly ball bearing ,in side 'O' MS ring, outer body base and top cover frame, alongwith blade set , down road with clamp, canopy, capacitor etc and after renewal of new body parts refixing/ hanging the on same place of ceiling with the help of nut ,bolt etc complete including providing of suitable type flate flexible cable and making electric connection complete all as specified and directed .

S&F in renewal of flexible type round PVC bedded with PVC insulated and sheathed with multi FRLS cable of 1100 volt grade with multistranded copper conductor wire of size 1.5 Sq.mm 3 core type (Nominal area) ISI Marked complete, all as specified and directed by Engr-in-Charge .

S&F in repair rigid non metallic PVC Casing capping strip of size 25 mm with all fitting including providing clamping arrangement for holding on wall complete all as specified and directed.

S&F of flexible pipe (Nominal area 20 mm) suitable for cable or wire protection complete, all as specified and directed by Engr-in-Charge .

S&F of rigid non metallic PVC conduit of size 20 mm external dia heavy duty with all fitting laid in trenches/ wall including providing clamping arrangement for holding of pipe on wall in proper size of clamps, nut bolt ,and washer etc complete all as specified and directed.

S&F in renewal of PVC insulated body three pin plug top of rating capacity 15/16 Amp and making electrical connection complete all as specified and directed by EIC.

S&F in renewal of MCB SP 40 to 63 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring connection complete including taking down of old unserviceable MCB complete all as specified and directed.

S&F in renewal of MCB SPN 40 to 63 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring connection complete including taking down of old unserviceable MCB complete all as specified and directed.

S&F of MCB SP 06 to 32 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring connection complete including taking down of old unserviceable MCB complete all as specified and directed.

S&F in renewal of modular type switch of 6/10 Amps 220 Volts AC, one module type or all as per existing type sample/ size and model complete all as specified and directed. Make- Legrand Arteor /Anchor Roma / Havells Crab tree/Anchor penta

S&F in renewal of modular type socket of 6/10 Amps 220 Volts AC, 3/5 multi pin type with two modular type or all as per existing type sample/ size and model complete all as specified and directed. Make- Legrand Arteor /Anchor Roma / Havells Crab tree/Anchor penta

S&F in renewal for single core copper wire made out of PVC insulated FRLS of 1100 Volts grade with having multistranded copper conductor wire of size 1.5 Sqmm (Nominal area), complete all as specified and directed.

S&F in renewal of LED electronic Driver suitable for 36 to 48 watts LED light fitting/ fixture of any type any make or as per existing make and sample complete for rate voltage upto 220 Volts and making electric wiring connection including taking down of old driver all as specified & directed.

S&F in renewal of LED electronic driver suitable for 9 to 18 Watts LED light fitting/ fixture of any type any make or as per existing make and sample complete for rate voltage upto 220 Volts and making electric wiring connection including taking down of old unserviceable driver complete all as specified & directed.

S&F in renewal of heavy duty large type size of MS wall fasteners (geyser bolt) of suitable of size 10 mm dia not exceeding up to 100 mm long along with nut , bolt etc including drilling ,grouting it on wall for hanging of geyser and making to good the disturbed surfaces to match with existing surfaces complete including dismantling / taking out of geyser from existing site position complete all as specified and directed by EIC.

S&F in renewal of MS ‘U’ clamps with rubber reel, nuts bolts and washers complete with split pins suitable for ceiling fans complete all as specified and directed by Engr-in-Charge.

S&F in renewal of ball bearing suitable for ceiling/exhaust fans/wall mounting fan of all as per existing type of sample & size/shape and properly match to the each other as per the existing type of bearing model & make of item complete and suitable using for any type fan systems including down of existing old renewal item complete all as specified & directed by EIC.

S&F in renewal of LED bulb of rated capacity 7 to 9 Watts of shape pin or threaded type required in colour white / warm type complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm and 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level and connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers of galvanised steel and to be protected by GI pipe 15 mm bore light grade & connected to earth test point/main switch board or main control board and also providing charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil all as shown in Electrical Plate No 3 of SSR part -I. and also making arrangement of 20 mm dia bore galvanised iron pipe (medium grade) for water and making funnel, wire mesh, and also including provision of concrete pit cover framing work in PCC 1:2:4 type B-1 (using 20mm graded of stone aggregate) with XPM (weight not less than 4 Kg/Sqm) and outer frame work of angle iron 25x25x6mm with top concrete pit cover and handle for lifting of cover complete work all as specified and directed.

HARPAL ENGINEERS AND BUILDERS (BID ID -3470797)

RISING SUN ENGG WORKS (BID ID -3471013)

M/s Lal Enterprises (BID ID -3476170)

SUMEET TRADING CORPORATION (BID ID -3476440)

M/S MARSHAL TRADERS (BID ID -3476561)