Providing and fixing of 6 meter pipe pole assembly for antennae fixing and Temporary shed for battery and Power Plant at Boys Hostel Building of AIIMS Campus under

Amount

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :

1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for :

Columns, Pillars, Piers, Abutments, Posts and Struts

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately):

12 mm thicK

Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.

Providing and fixing flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete (frame work to be paid separately) :

12 mm thick

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

Two or more coats on new wor

P & F GI pipe of 100 mm dia ( B - Class, Medium Wt.) Swastik, Zindal or equavalant make as approved by engineer in charge including cutting, hoisting, lifting up to G. floor upto Top floor level, fixing in position and applying a priming coat of approved steel primer all complete.

100mm GI pipe

Providing and fixing MS plate , gusset plate jointed to angle iron / GI pipe and steel work in builtup and welded section .for stay including cutting, hoisting, provision of required size holes, fixing in position and applying a priming coat of approved quality steel primer all complete.up to twelth floor.

Providing and fixing bracket made of two nos.M.S..flat of size 40 mm x 5 mm.and placed back to back with provision of required size holes, as per direction of engineer in charge including cost of nut & bolts and bending & making holes..all complete.up to twelth floor.

600 mm long bracket

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

0.80 mm thick with zinc coating not less than 275 gm/m²

Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand).

Finishing walls with water proofing cement paint of required shade :

New work (Two or more coats applied @ 3.84 kg/10 sqm)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :

Water thinnable cement primer

Providing and fixing antistatic flooring of 2 mm thick of standard make with ISI mark adhesive including fixing of copper strips 1.50 mm thick and brass plates with brass screws at one end of the room ,the continuty of the coper strip have to be available floor so as to make the whole floor area compete earth all complete as per direction of engineer incharge.